setting up VPN IPSec with Cisco ASA 5505. I've managed to successfully setup VPN andcan connect to it from outside and browse securely to the outside/internet via tunnel. However, once I am connected to VPN, I cannot access any of my internal hosts/servers via VPN client.
!
hostname ciscoasa
enable password xxxxxxxxxxx encrypted
passwd xxxxxxxxx encrypted
names
!
interface Ethernet0/0
[code]....
I have an ASA 5510 configured 3 interface Internet_AAPT, Internal_Network and Server_Network. The server network works fine as is able to connect to the internet and services like port 80 work from the internet in. But from the Internal_Network can only get to the server network but not internet (6May 13 201214:17:4030201310.153.111.21253663199.47.216.14880Built outbound TCP connection 42508 for Internet_AAPT:199.47.216.148/80 (199.47.216.148/80) to Server_Network:10.153.111.212/53663 (10.153.111.212/53663). The weird thing in logs i see a connection being made but for some reason its referring to the Server_Network interface? below is my current config...
ASA Version 8.2(5)
!
hostname ASA01
domain-name names
name 10.153.11.184 QNAP
name 10.153.11.192 exc2010
name 10.153.11.133 zeacom
[code]....
I have configured an ASA 5505 to connect a single internal network to internet, it is not working. I have attached the config
View 9 Replies View RelatedI have an ASA 5505 configured with internal network, a DMZ, and a VPN on seperate subnets. The implicit rules allow my internal client computers to connect to the web servers on the DMZ IP, but I can not connect to the public NAT address from the internal network. I have a DNS server on my internal network and it does resolve to the public IP correctly. NAT seems to be working correctly because if I go outside the network and connect to the public IP or qualified name then I can get to everything correctly. I do not see any messages in the Cisco logs and the packet trace tool shows the route of http from an internal IP adddress to the external (NATed) address is allowed.
Specifically, I can go to http://192.168.1.121 from the internal (192.168.0/24) network, but I can not go to http://72.22.214.121 (the NAT address) from the internal network. If I am outside my cisco then I can go to http://72.22.214.121 easily. [code]
We are facing a bug with our ASA 5500 series (version 8.5.26) and the Internet explorer when the users connect to ssl vpn and they are not able to connect to the network resources like their PCs and the Cisco port forwarder keep asking for its installation
We already updated the ASA version installed in the user's computers the Microsoft kill bit patch.
Any documentation or information pertaining to replacing an existing wireless network. I will be looking to replace a 4400 w/12APs with a 5500 w/12APs. The users typically utilize the WiFi network on a regular, so I am trying to figure out how to replace the existing hardware without interrupting the service.
What would be the best way of handling a situation as such? I am currently looking on the Cisco Doc. website, hoping to find something related to this.
I have a cisco wireless environment running NCS with a wism, two 4400's, and now two 5500's. The bulk of our AP's are 1131's, however we are now ordering and using 1142's and 3602's. We just added the 5500 controllers in preperation for a large deployment of 1142's. What I would like to do is have the system setup so that the the 1142's will default to the 5500 controllers. Since the wism and 4400 wont support the 3602's its not really an issue for them. I'm trying to find the best way to accomplish this. I've already heard one suggestion of manually going through and setting all the AP's to a primary and secondary controller but I was hoping to find a way to have the system do this for me.
View 5 Replies View RelatedI am going to deploy Cisco ISE with WLC 5500. I have two kinds of users one for which I want to deploy just open access Wi-Fi network, without working with Cisco ISE and Second group of Users for which I want to deploy Cisco ISE services like advanced authentication, posture and profiling. For both users I have just one WLC. Is there any problem to just deploy two SSID one for open access (without Cisco ISE) and second Secure with Cisco ISE ?
View 5 Replies View Relatedi can can ping my host externally from another ip however i have left my house without port forwarding to my pc is there a way to connect to my pc via something like this command "xxxx.dyndns-home.com:192.168.1.100" i have tried this and does not work as it does not like the ":"truth be told my real goal is to ultimately be able to look at my webcam as it is pointed at a homebrewing project which i need to see. this is what i want to work on setting up while in rdp?
View 2 Replies View RelatedI'm given an ASA 5505 to configure for remote access vpn. I can establish vpn connection to the ASA 5505 but can't access any of the internal vlan/subnets. I configured three of the ASA ports for connection into each of the internal subnets/vlan via a switch.Given below is my full configuration.
ASA5505# sh run: Saved:ASA Version 8.3(1)!enable password bLjadbVl0mgRQWih encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1nameif insidesecurity-level 100ip address 192.168.1.1 255.255.255.0!interface Vlan2nameif
[Code].....
New windows 8 pc which can't connect to an internal ip (inside address 192.168.1.237) through browser, either firefox or IE. I use this address to open a webdav session on browser to transfer files form pc to iphone, or vice versa, using ipphoone app Files Pro. I have no problem connecting on this using my old windows xp pc using ie, which is in another room. Both pcs used my fairly new ASUS ac router. Is there a windows8 firewall or toehr exception list that I need to modify on the windows 8 (HP) laptop?
View 1 Replies View RelatedWe recently got a Cisco ASA 5510 Security Appliance and I have some general question.
We have 1 T1 internet connection, and we have 2 internal networks. These 2 internal networks currently hav access to the internet. I am having issues with the 2 internal networks being able to communicate with each other.
what is the ideal timeout for users when no activity is performed while connected to network via wireless
-WLC model 5500
-AP model 1200 series
users get disconnected every 15mins when machine is Ideal and where do i see this option.
I have a 1TB internal SATA HD that I want to turn into a network drive. Since the MB in the desktop I had this drive in fried, I'm looking for options to network this drive (that stores photos, music, utilities, etc). So far after brief research, looks like my most reliable option would be an external enclosure with USB and a router with a USB share port.
-what other options do I have?
-what would be a good wireless N/G router with a USB share port, great range or range extender option and can handle multiple devices online (xbox, ps3, wii, droid phones, 2x or more laptops, wifi Tv all not connected at once, but a few can be, so I need a router to handle the demand)
-a good reliable external enclosure
I need a router that has a good strong signal. The current G router I have (d-link di-524(?)) works ok, but the signal cuts out in the kitchen and virtually non-existent in my garage (to use Pandora on phone).
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. [code]
View 4 Replies View RelatedWe have ASA5510s and I've configured an SSL VPN using AnyConnect.. The VPN address pool is 10.10.10.0/24 and our internal network is 10.10.20..0/24. After successful login, using LDAP. the client receives a 10.10.10.0/24 address from the pool, but cannot access anything on the internal 10.10.20.0/24 network. I've toyed with access lists and NAT exemption, but to no avail. What do I need to do?
View 8 Replies View RelatedI have the connection working with my ASA 5505 but cannot ping the internal network. (Note external interface is getting the IP via DHCP)
View 4 Replies View RelatedI have a small request. I have a setup where the internal users within the corporate network need to remote VPN into the VPN concentrator.
The setup is as below
inside
(202.x.x.x)VPN ASA 5520 ---------------- FW ------------- intenal network
----------------
outside
The problem is that the 10.0.0.0/8 internetl network establishes the connection via the outside interface. However, the return path is via the inside interface. But the vpn concentrator keeps showing next-hop not reachable for USP 500. Why does it show that when it has a route via the inside interface.
6|Jan 29 2013 13:44:38|110003: Routing failed to locate next hop for udp from NP Identity Ifc:202.x.x.x..29/62465 to outside:10.163..x.x/5892
Also, since we are trying to send traffic from outside to the inside interface, I tried to NAT the source ip i.e 202.x.x.x and left the source unaltered. But it still doesnt work.
I am wondering why is the ASA not routing via the inside interface and looks for the return traffic via the same outside interface the traffic entered in. The outside has a security-level of 0 and the isnide has a sec-level of 100.
I have a hosted web server that has a website on it that needs to connect back to a database within our internal network. We have a Cisco WRVS4400N Wireless Router with 2 VLANS. VLAN 1 goes to a Watchguard Firebox which is connected to our internal network. VLAN 2 goues to our classroom network.
Our database is on VLAN 1. I have opened port 1433 on the Watchguard to allow SQL traffic from our Web Server. I can telnet from my workstation on VLAN 1 to the Web Server over port 1433, so I know the Web Server is not blocking anything. When I try to telnet from the Web Server to our Public IP address over port 1433, it fails.
I believe I have the firewall on the Cisco WRVS4400N off, so it shouldn't be blocking any traffic, but for the life of me I can't get this to work. I have been working on this for two days, and I NEED it to work. This was working up until last week, then it quit working. I am the only person making changes to our network, and there were no changes made during that time.
My router just dropped the internet. I checked with ISP and confirmed that their modem is fine - I can connect direct into that - but the DIR-655 won't connect externally. I've tried wireless and wired and can connect fine to the router, but it is like the firewall has reset itself or something. at the moment I'm surviving because of a 30m long ethernet cable to the modem going out the window and round the house!
View 5 Replies View RelatedI have a Cisco ASA 5505 (version above) and I have someone that needs to SSH into a box behind the ASA. I'm having a few issues trying to configure this access-list and NAT. I've tried many combinations and clearly my IOS is not as good as I thought. What commands should I enter to accomplish mapping SSH from an outside network range to an internal host ?
View 5 Replies View RelatedI now need to configure an ASA 5505 for a small server farm. It's fairly straightforward:isp -> asa5505 -> internal servers,'m using static addresses -- no DHCP involved.VPN works; I can get into the internal network.pinging from the ASA to an external address works,However, I cannot get from a laptop connected to an internal port out to the internet, either using ping or typing an address in the browser.
View 7 Replies View RelatedI am trying to build a remote vpn in ASA 5520 Software Version 8.3(1). I am using ASDM 6.3(1) for the configuration. I went through the SSL VPN wizard and did the configuration. I tried connecting to the ASA using anyconnect VPN and I could successfully connect the VPN. My home laptop takes an IP 192.168.60.21 (which I have defined in the wizard). Now my issue is, I can't access any office internal network from this laptop (none of the internal IP is ping ing even). Meanwhile, I could ping and rdp to this laptop(which is connectd by anyconnect VPN) from my office network. One thing I noticed is that when I give a traceroute to an internal IP from the laptop, the first hop goes to my home ISP router.
View 8 Replies View RelatedI write here to see if some kind soul can not solve my problem (which is common to seeso many people around the world). problem: I have a mail server (192.168.1.17) configured static NAT because it is accessible byPublic IP (PPP.PPP.PPP.PPP). Everything works properly from the outside, but if I get my Mail server (on port 443) from the internal network (192.168.1.xxx) there 'verse. This configuration is called Nat inside-to-inside is done by default by some SOHO routers(such as the TPLINK from 25 euros) but Cisco did not succeed. I search on the internet for 2 days without a get nowhere. PS: I have a Cisco 1801 router. (or 1941 as another router).
View 13 Replies View RelatedI have a base config of AnyConnect VPN below, however the ASA 8.3.1 code has deprecated some commands and the VPN/NAT/FW rule syntax is quite different. Can som point out what's missing from the pertinent config below that prevents the VPN Pool from accessing the internal LAN?
The Core LAN router is 1.2.3.1.
!
ASA Version 8.3(1)
!
interface Ethernet0/0
nameif inside
security-level 100
ip address 1.2.3.2 255.255.255.0
I have two ASA 5515 configured in failover (active / standby).I used the ASDM wizard to create connections through ipsec cisco client.Currently users are able to connect but can not do a ping to anywhere inside the network.
The ping request is received from the internal client but the internal client can not communicate with the remote user.The ping fail also directly from the ASA.
When the remote client is connected an entry is added to the routing table:
S 192.168.10.130 255 255 255 255 [1/0] via <ip of the ISP>, "WAN"
as if that IP was reachable directly from the Internet.I tried changing the settings of the NAT but in no way I can make them communicate.The ultimate goal would be to create different users with different access permissions to the LAN and the other subnets in the company.
I'm new to this cisco 5505 and I want to carry out a task as simple as a remote access VPN, in my case I did the wizard, with time on my test, I could connect to the VPN, but I can not ping any device internal network. [code]
View 6 Replies View RelatedWhat I got is a 5505 ASA firewall and I'm connected to it via VPN. I'm pulling an 192.168.169.x address because that's what we set their company's internet LAN to. Which is what we want. What I can't do while I'm VPN'd in is ping from the internet network to the DMZ, and the same when I try and ping from the DMZ to the internal network.
The DMZ is on a 196.0.0.x network.The internet network is 192.168.169.x network.
I don't need them to have internet access on the DMZ I just want to be able to access it from the internal network. What is going on is we need them to be able to VPN into the DMZ and access their equipment. At this point it would just make me happy to be able to ping from the internal network to the DMZ and I can figure it out from there I've setup rules and applied them and when I wasn't having success I referred back to defaults. Right now the rules are set at default, any thing in and anything out, on both internal and DMZ. I'm using a VPN client and going through Cisco ASDM Launcher to setup the rules and static routes, I haven't done anything with the command line. All the research I've done everyone does it command line, I find it easier to do it GUI. This is my first time working with an ASA firewall.
I am having a problem getting my ASA to work properly. I attached a diagram for reference and most of the config is below. When I finally got it to route properly between 2 sub nets on the internal network, the NO NAT statement broke routing for the VPN Clients who rely on a NAT statement for the same sub net that is listed in NO NAT access list. I can get one of the 2 to work by replacing NAT statements but can't figure out a combination to allow routing for both the internal sub nets and the VPN clients to work.
It's been about 5 days of tweaking this thing just to get the internal routing to work correctly and when I finally did I broke VPN client access. To note, the VPN clients can still log in and get a session going, they just can't get anywhere once they are in. I also think there's a lot of stuff in this config that is not needed like a lot of the object groups, etc. but I am being very careful about removing anything. I took over support of this ASA after someone else put it in place and over this past weekend we moved it to a new building and new ISP and that is when I had to get it to route between sub nets. The main point of this move was to remove building 1's reliance on building 2 for Internet and outside email access in the event that building 2 is not available (it is close to water and this has happened more than once over the past year).
So that is why I can't go with the smartest option of just keeping the routes on the router in the other building. I also know the 1600s are ancient but they're all we have for now. I can provide those router configs also but they are VERY basic, all static routing. The IP for the Cisco router on the same sub net as the ASA is 192.168.42.254.
This is the statement that allows the routing to work between the 2 internal sub nets but breaks VPN clients: nat (INSIDE) 0 access-list NO NAT
This is the statement that allows the VPN clients to work but breaks the internal routing: nat (INSIDE) 0 access-list INSIDE_nat0_outbound
The rest of the config is below the diagram.
ASA Version 8.2(2)
host name Cisco asa
domain-name default.domain.invalid
enable password - encrypted
password - encrypted
names
dns-guard
[code]...
i just installed a pix515e ( ios ver 6.2) in my network. and the vpn users can connect to it from the internet successfully but they aren't able to connect to any of the internal resources. some other informaion: i configured nating between the internal network (10.0.0.0/24) and the internet and another static nat policy between an internal resource through another public ip address on outside interface. but right now i need to let the vpn clients to connect to my internal resources.
View 5 Replies View Relatedok i have setup a subnet on my uncles network on which i am running a domain with server 2008. i am using a dlink di 624 router and wanted to know if i upgraded to a 300mbps router would this increase the bandwidth within my network?i know i am limited to what i am receiving from my uncle who is also limited to what he is receiving from the ISP. im not worried about internet speed. i want to increase client to server speed for both lan and wireless.
View 1 Replies View RelatedMy computer has an option in the Bios and in the boot menu for the "internal network adapter boot." Can I use this to install an OS?
View 3 Replies View RelatedHow to open website company in internal network
View 1 Replies View Related
