Cisco :: How Many APs Does Wireless Controller 5508 And WCS (version 7.0) Supports
May 30, 2011How many APs does wireless controller 5508 and WCS (version 7.0) supports?
View 7 Replies
ADVERTISEMENT
Cisco :: 5508 - Upgrade WLC Wireless LAN Controller Version 6 To 7
Feb 28, 2013I want to upgrade a 5508 WLC from version 6.0.196.0 to the most recent 7.4or 7.3 is it ok to skip so many versions, will this cause an issue?
View 9 Replies View RelatedCisco Wireless :: New 1552AP Mesh With 5508 Controller Version 7.0.116.0?
Dec 12, 2011New to working with Wireless and the Cisco Meshing concept so have a few questions to ask.I currently have the majority of the mesh setup and configured. I have a setup with two RAPs with 9 MAPS connecting to each RAP.
First question is how many MAPS can connect to a RAP generally?Secondly how can I block other cisco AP's that are not in my mesh network from trying to connect to my AP's
The below is constantly hammering the logs for 6 devices that are Cisco close to my mesh that are not mine.
8
Sat Nov 12 23:31:53 2011
Mesh child node '58:35:d9:aa:db:4f' has changed its parent to mesh node '88:f0:77:b7:c6:e0' from mesh node '88:f0:77:b7:c6:c0'.
Mesh Node '58:35:d9:aa:db:4f' failed to join controller, MAC address not in MAC filter list.
I have only added the MAC addresses of my AP's in to my AP Policy under security. Would these other AP's affect the mesh in any way?What I am seeing is the AP's constantly changing the child to parent relationship. I have inherited this network and they have about 20 AP's all within a square mile which is absolutely overkill. Would this close proximity of AP's together be the cause for the constant child parent changes?
How close should I have RAP's together. The network was setup so two raps are about 20 metres apart and the AP's on one side connect to RAP1 and the other to RAP2?How do you deal with Radar? The install is pretty much next to an airfield with radar running and a few times I have seen all the AP's disconnect and change channels.
Cisco Wireless :: Using 5508 Controller With ACS Appliance Running Version 4.1 Or 4.2?
Apr 1, 2013using a Cisco 5508 controller (code version 7.4.100.0) with an ACS appliance running version 4.1 or 4.2?I've found that the ACS constantly reports a 'Bad request from NAS' (Invalid message authenticator in EAP request). message. This usually indicates a mismatched shared secret but this isn't the case.The controller works fine opposite a Microsoft NPS Radius Server.
View 6 Replies View RelatedCisco Wireless :: 5508 - Anchor And Guest Controller IOS Version
Dec 5, 2011I know that the recommendation from Cisco for the mobility anchor feature to work well is to use the same IOS version on the anchor WLC and local WLC controller. Now I´ll install on a new site a 5508 local WLC with a newer IOS version which is installed on the other controllers ( Guest and local ). Later I´ve planned to update also the other controllers to the same IOS version. Now my question is, must I upgrade all other controller at the same time ?
View 4 Replies View RelatedCisco Wireless :: WLan Controller 5508 - Latest IOS Version
Apr 23, 2013What is the latest IOS version for the WLan Controller 5508 ?
Actually I am using, Software Version7.3.102.0
I see the following at Cisco website:
Latest Releases
7.2.115.1(ED)7.3.112.0(ED)
7.0.240.0(ED)
7.4.100.0(ED)
Cisco Wireless :: 5508 Controller Version 7.1.91.0 And Supported AP (List)
May 9, 2012I need to know for shure if the aps listed below are compatible with 5508 controller version 7.1.91.0
the ap's are
AIR-LAP1242AG-E-K9
AIR-LAP1242G-E-K9
AIR-CAP3501E-E-K9
AIR-CAP3502E-E-K9
AIR-LAP1231G-E-K9
of course I checked release notes [URL]
Cisco Wireless :: Which Version Of Prime Infrastructure Supports WLC5508 Version 7.4
Mar 11, 2013which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies View RelatedCisco :: 5508 Controller - Software Version / High Availability?
Feb 18, 2013I will install next week at a customers side a new Pair of 5508 Controller. They have at the moment one old 4404 with about 70 APs.So the bought the new 5508 with HA Pair.For the HA i will need 7.3 i read in the High Availability (AP SSO) Deployment Guide.There are now two 7.3 Versions, or i can choose the new 7.4 Version.
AIR-CT5500-K9-7-3-101-0.aes
AIR-CT5500-K9-7-3-112-0.aes
AIR-CT5500-K9-7-4-100-0.aes
So what software version will be the best at the moment?I will install also a Cisco Prime Infrastructure on a ESX host.For the 7.3 in can use the 1.2 , but for the 7.4 i must take the 1.3.
Cisco Wireless :: Controller Software That Supports 3600 And 1231 APs?
Dec 4, 2011Customer is interested in deploying the 3600 AP's but will not be able to replace all his 1231's, any chance there is a release between 7.0.220.0 and 7.1.91.0 that will support both AP's?
View 6 Replies View RelatedCisco Wireless :: 4404 Guest Anchor Controller With 5508 Foreign Controller?
Aug 12, 2012I know that the 3600 series APs are not supported on the 4404 WLC. However, would the following scenario be supported? I would like to use the 4404 (software rel. 7.0) as a guest anchor with a 5508 (software release 7.2) as the foreign controller supporting series 3600 APs. I ask because the APs do not need to join the guest anchor.
View 7 Replies View RelatedCisco Wireless :: 5508 Foreign Controller And 4400 Anchor Controller?
Jun 2, 2013We have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller. We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0. Will there be any issue if the anchor controller is not the same code as the foreign controller? Do I also have to upgrade the acnhor controller to 7.0.240.0?
View 2 Replies View RelatedCisco WAN :: Which Version Of IOS For 2621 Supports NAT
Sep 4, 2012Which version of IOS for the 2621 supports NAT?
View 1 Replies View RelatedCisco :: Does PI Supports VMware ESXi 5.1 Freeware Version
Mar 4, 2013Does PI Supports VMware ESXi 5.1 freeware version?
View 1 Replies View RelatedCisco WAN :: Does Version 12.2.58(EZ) Supports BGP ORF Feature (RFC 5291 And 5292)
May 20, 2013Is cisco version 12.2.58(EZ) supports BGP ORF feature (RFC 5291 and RFC 5292).
View 7 Replies View RelatedCisco Infrastructure :: To Find An IOS Version That Supports BGP For 1800 And 1900
May 17, 2012I need to find an iOS version that supports BGP, Dot1q, and MPLS for either a 1800 series or 1900 series not sure the best place to find this sort of info out.
View 1 Replies View RelatedCisco Switching/Routing :: Ios Version That Supports 4 Byte BGP In Me3600
Jul 10, 2012Which IOS version for me3600 supports 4-byte BGP?
View 1 Replies View RelatedCisco Switching/Routing :: IOS Version For 1811w That Supports Authentication Shared Key
Oct 19, 2012Trying to configure 1811w for wi fi . Need to use authentication shared keys but current IOS seems does not support ir
Router(config)#int dot11Radio 0
Router(config-if)#ssid manvee1
Router(config-if-ssid)#a?
% Unrecognized command
Router(config-if-ssid)#
(C181X-ADVIPSERVICESK9-M), Version 12.4(24)T8.
Need to know which IOS will support wi fi and authentication command under dot11 radio 0?
Cisco :: 5508 WLC - Max Amount Of APs It Supports
Apr 11, 2011the max amount of AP's one 5508 WLC can support ?
View 4 Replies View RelatedCisco :: What Version Of SSH That A 2106 Wireless LAN Controller Is Using
Mar 22, 2011how I can find out what version of SSH that a cisco 2106 wireless LAN controller is using?Is there a CLI I can type to figure that out or do they only support one version?
View 1 Replies View RelatedCisco Wireless :: Software Version Upgrade For 4402 LAN Controller
Jun 5, 2012We have Cisco 4402 Wireless Lan Controller with Software Version 3.2.171.6 and we want to upgrade it to latest version.
What is the latest version to upgrade the WLC?
Also since WLC is running on very lower version is it possible to upgrade to the latest version directly or we have to move it step by step to upgrade this to latest version?
Cisco Wireless :: Recommend Software Version For WLC 5508
Jun 5, 2013I have 2 * 5508 wlc , LAP1142 , want to implement wlc fail over , so what is your recommend WLC software . How about 7.3.101.0.
View 6 Replies View RelatedCisco Wireless :: WLC 5508 Field Recovery Version Not Available
Jul 9, 2012I have upgraded my new WLC to version 7.0.98.218. I noticed the N/A for the Field recovery version. On my old 4402 it is called the Emergency Image Version, and it is 5.2.157.0
How do i get a recovery version on the WLC?
Cisco Wireless :: WLC 5508 Running Version 7.2 - Redundancy
May 1, 2012I have 2x WLC 5508 running version 7.2. 1st one is setup and running. My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?
View 4 Replies View RelatedCisco Wireless :: WISMs Version 7.0.220.0 / CPU Receive Multicast Queue Is Full On Controller?
Feb 21, 2012I'm seeing the alert "CPU Receive Multicast Queue is full on Controller" on the WCS from one of my controllers. This is during peak hours and on a pretty busy WLC. I can't find any related lines in the logfiles. I'm currently running software version 7.0.220.0 on a WISMs.
View 13 Replies View RelatedCisco Wireless :: WLC 5508 Software Version Working With ISE1.1.2?
Feb 24, 2013My understanding is that for fully WLC 5508 integration with ISE 1.1.2, it needs Version 7.2.103.0. Question is if customer has 5508 with either 7.0.230 or 7.0.98, and ISE 1.1.2, can AAA part work? what part will not work, any potential issue if they don't upgrade 5508 to 7.2.103?
View 2 Replies View RelatedCisco Wireless :: 5508 Version 7.4 - AP 1310 No Longer Can Associate To WLC
Apr 19, 2013I have upgraded my WLC 5508 from 7.0 to 7.4 and the AP 1310 no longer can associate to WLC.
Seems that the AP doesn't work with WLC ver 7.4
Except changing these APs to autonomous mode, any other alternatives?
Besides, if we change them to autonomous mode, can Prime Infrastructure manage/monitor these APs?
Cisco Wireless :: 5508 (version 7.2.103) / OE600 AP - LED Display Orange
May 28, 2013i have a wlc 5508(version:7.2.103) and oe600 ap, recently,someone oe600 does't work which has no ssid from the ap,so i cannot connect the wifi to access internet,but the ap still associated wlc,the LED display orange.according the cisco document,
[URL]
Cisco Wireless :: WLC 5508 Version 7.0 - Enabling Global Multicast Mode?
Apr 16, 2013I am using WLC 5508 version 7.0 facing issue while enabling global multicast mode .
client machine stops DNS resolution after some time once we enable global multicast mode on WLC .websites are opening with IPs but not with DNS names .
DNS resolution starts working immediately after disabling multicast mode on wlc .
Cisco Wireless :: 5508 / AP On Different Vlan Than Controller?
Sep 30, 2011I have a 5508 controller at our headquarters and am installing some 3502 AP's at a remote branch. Unfortunatly, the remote branch has a different Vlan setup for some reason and the vlan that is used for the WLC (90) is designated for telephony at this branch. Can I put the AP's on a different VLAN (10) without having any issues? I will still use DHCP option 43 to point them back to the controller. Below are the configs for the WLC interfaces and what I am proposing for the AP interfaces:
WLC Config
interface GigabitEthernet1/1/38
description WLC01
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 90
switchport trunk allowed vlan 1,10,50,90,91,390,410-413,610-613,800,810,811
switchport mode trunk
[code]......
Cisco Wireless :: Setting UP 5508 LAN Controller
Nov 13, 2012Cisco 5508 Series Wireless Controller for up to 100 APs 802.11a/g/n Ctrlr-based AP w/CleanAir; Ext Ant; E Reg Domain..For Mobility i want to settup the device such that the SSID would be the same with thesame security key and in different subnet.
View 5 Replies View RelatedCisco Wireless :: WLC 5508 / Rejoin To Different Controller
Feb 10, 2013I use WLC 5508 (ver 7.0.116.0) with aironet 1140. I need to connect my APs to different controller .After log in via ssh to AP i am trying to do:
capwap ap controller ip add x.x.x.x
reset
But after reload, AP is still joined to the old WLC. So another idea was to log to that WLC and put:
config ap primary-base WLC2 AP_NAME x.x.x.x
and after that:
config ap reset AP_NAME
But still nothing, it's joined to another controller although "show ap client config" shows that primary-base switch is x.x.x.x ?How can i force it to join to other controller?
Cisco Wireless :: Upgrade 5508 Controller From 7.0.98.0 To 7.0.220.0
Jan 29, 2012We are looking to upgrade our 5508 wireless controller from 7.0.98.0 to 7.0.220.0. Reason being, we have experienced a lot of access points disassociating from the controller as well as client authentication issues. Upgraded from 7.0.98.0 to 7.0.220.0 and any issues during the upgrade or after the upgrade?
View 3 Replies View Related
