Cisco :: LMS 4.0.1 Devices Not Added To DCR After Discovery?
May 30, 2011
We have just installed LMS 4.0.1 and started to discover parts of the network. After the discovery process finished successfully - 100+ new devices were added to DCR message - I was able to see the devices by clicking on their number but when I go to Inventory-Add/Import/Manage Devices I cannot see any device in the Group that I created.If I restart the CiscoWorks Daemon Manager process the newly discovered devices are added to the custom Group. This seems like a bug as I had a LMS 4.0 evaluation installation a few months ago and device discovery was working fine meaning the devices were added immediately to the Inventory.
View 4 Replies
ADVERTISEMENT
Nov 13, 2011
I am installing LMS 4.0 in my site newly I have nearly 1000 devices in network .When i had tried the autodiscovery mode using ping sweep method the devices are getting discovered but showing us unreacheable . All the devices are going under unreacheable no devices are getting added to the DCR .SNMP settings are configured correctly.
whether the autodiscovery will add the devices to DCR or i need to add the devices manually.As per my requierement i need to configure below things , is it possible to configure the same
1)LMS as SYSLOG server
2)LMS should send EMAIL notification if device goes down , interfaces goes down , memory / cpu goes high ,switch module goes down
3)Need to know if cisco releases new device packages how we will update to the cisco works .
View 4 Replies
View Related
Jul 1, 2011
By reruning discovery with new seeds etc I have more devices discovered. Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
View 10 Replies
View Related
Jul 30, 2011
i am installing a CWLMS 4.0 and everything was good until i have reached the discovery for the devices, i am dealing with a bank setup and the branches is connected using layer 3 MPLS, branches are located behind the ISP router, so as a cdp neighbor i cant see anything but the ISP router at my Core.
so i cant see the branches routers as neighbors to my (seed Device) Core, and i have tried to use the ping sweep and i could not reach them also. and also to add them manually as we were doing before in the earlier versions of CWLMS, using the Devices and Credintials, this option is removed from the LMS 4.0 as i have red in a document.
1- snmp is configured on all devices.
2- access-list is configured on all devices.
3- i am able to reach the LAN Devices without any problems and the configuration is the same on all of the devices.
View 1 Replies
View Related
Aug 26, 2012
i have planned a deployment with one acs in Europe working as primary, one acs in europe as secondary and one acs in USA as secondary also.
I can add one acs in europe to the deployment as secondary. When I try to add the acs in USA to the deployment - Nothing really works.
The status shown in the primary is offline (red) and status pending. It stays like this for hours. When I log in to the gui directly on the acs in USA, it still has status primary.
The two acs are transparently connected. There is WAN optimization (cisco waas) in between the two datacentres..
View 1 Replies
View Related
Aug 22, 2012
I am pretty new to Cisco - and I have a little 506E that I love. I got it working with my first scenario where I have one server that is my web, and e-mail server.I also opened the RDP port so I can remote into it. The IP's for the old server are internal 192.168.1.23 name ferbweb-external 71.12.111.219 name ferbwebpub. Now - I need to add another server in the exact same way with the same ports 80, 25, and 3389 open to the outside - IP's internal 192.168.1.31 name ferbmail and external 71.12.111.220 name ferbmailpub.I can get to all of these ports on the new server on the inside network - so that is not the problem.So, I went into the config, copied the statements for the old server, and changed them for the new server and added them to the config. I can still get to the old server from the outside fine, but cannot get to any ports on the the new server from the outside at all.I have done a lot of research, and cannot find what I am doing wrong.
View 6 Replies
View Related
Jun 23, 2011
How many WLCs 5508 can you add to the mobility group?
View 1 Replies
View Related
Dec 22, 2011
I have the Cisco Router 861 whit the IOS c860-universalk9-mz.150-1.M7.bin. I have created a Vlan, but when I create a second vlan, I have this message: "Vlan can not be added. Maximum number of 2 vlan(s) in the database.
I need to add more than two vlan.
View 3 Replies
View Related
May 31, 2011
Note If you configure VPN, the client dynamically adds invisible NAT rules to the end of this section. Be sure that you do not configure a twice NAT rule in this section that might match your VPN traffic, instead of matching the invisible rule. If VPN does not work due to NAT failure, consider adding twice NAT rules to section 3 instead.
View 2 Replies
View Related
Mar 25, 2013
when we add new switch to STP converged enviroment, switch flush the data from the data base.how to protect database from deleting the information
View 10 Replies
View Related
Feb 27, 2011
I recently installed a wireless printer and all seemed to work well until the next day. I am able to get on the Internet with my iPad but not my PC. I've tried winsock fix, ipconfig, netsh commands and other stuff but I can't connect to the Internet. When I tried to run ipconfig/all here's what I got:
An internal error occurred:The request is not supported.
View 13 Replies
View Related
Jun 5, 2012
I am researching on the behaviors of routers when MTU is increased beyond the MTU set in the routers. Also, when I use jumbo frames instead of normal MTU, how does it affect the network. So, what I plan to do is
LAN_A -- > blackbox --> WAN --------> WAN --> blackbox --> LAN_B
All the traffic coming from LAN_A will be of size 1500 Bytes or less. The blackbox in the center will add an overhead of 4 bytes, recalculate the CRC and transmit the packet on the WAN side. I wanted to know that:
1- if my LAN router and WAN router, both are set at 1500 MTU, then will WAN router drop the packet if it receives a packet greater than 1500B ?
2- If i keep my LAN side to 1500 MTU and I switch my WAN router to Jumbo frames, how will this configuration affect the complete network ? Will it work or not ?
3- I want to add the overhead on every packet coming in from LAN side, so, what options do I have to achieve this goal ?
PS. All types of traffic can come from LAN side.
View 2 Replies
View Related
Feb 8, 2011
I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?
View 5 Replies
View Related
Jan 2, 2013
I added RAM to my HP Pavilion a6000n PC, and the only downside is that it no longer identifies the Netgear WNR1000v2-VC router as wireless.I run Windows 7 - have Comcast Internet and have an Arris TM722 modem.The modem and router were supplied by Comcast.I reloaded the cd that came with the router, everything appears to be on the hard drive, but the wireless is still not "enabled". The computer shows the connection as a local area connection, even though the modem and router are connected to each other and the pc.
View 2 Replies
View Related
Dec 27, 2011
I have a friend who asked me how he could stop his children accessing porn etc on their ipods etc that they pick up from a wireless router.Is it possible to route a wireless signal through a computer that has parental controls?
View 1 Replies
View Related
Jun 25, 2011
I am doing an evaluation of LMS 4.0. I have loaded the system on Windows and manually added my core 3750 switch into the system. Device availability is showing the device as available. However, the other pollers like link utilization, error count, etc. all show that there is no data. When I go into the poller config, the pollers for link utilization and errors show 0 devices associated and a status of "instance not found". The CPU and availability pollers show active with my one device added. I have verified the credentials and if I go into Inventory -> Port and module and select my 3750 I do get a list of all the interfaces and the descriptions so LMS is connecting to the switch and pulling data.
So how do I get the pollers for link utilization and errors to start populating data?
Second question, during install I did configure the software update section and it said there was an LMS 4.0.1 available which I told it to download. Now I have a psu_download directory and some more directories like cm, cmf, etc. but I don't see any file on what to do with them. What do I need to do to install the new package files that were downlaoded to psu_download?
View 4 Replies
View Related
Jul 31, 2012
I have run out of public facing IP addresses and I need more. Assuming I have been issued 1.1.1.0/24 and my new/additional range/subnet issued is 2.2.2/0/24 - Can I carry on with the same configuration on my ASA5510 and just add static NAT for new services in the 2.2.2.0/24 range.
i.e.existing config
route 0.0.0.0 0.0.0.0 1.1.1.254 (upstream ISP)
Interface outside ip address 1.1.1.1 255.255.255.0
NAT 2.2.2.1 to 10.1.2.3
or, assume my ISP will deliver 2.2.2.1 to my outside interface (1.1.1.1.1/24) and if my NAT is in place it will get delivered to 10.1.2.3 inside.
or, put another way I dont need change my set-up as I just static route to my ISP!
my real public IP is a /27 can I use my broadcast address (its a legit public IP address)?
i.e 1.2.3.0/27 = 1.2.3.1 to 1.2.3.31
Outside interface = 1.2.3.1/27
Can I use 1.2.3.31 and NAT it to an internal server?
View 3 Replies
View Related
Sep 30, 2012
Nice for those who want to see what it looks like:
Cisco Connect Cloud: [URL] EA6500: [URL] . And of course all other Linksys devices: [URL]
View 1 Replies
View Related
Jan 15, 2011
I have a really weird issue with my cisco catalyst 3560G.
-device: cisco catalyst 3560g
-ios: 12.2-53(SE) IP SERVICES
scenario: configured IPv6 iBGP link between this switch and a router. the router is announcing 1 (test) route. the switch sees the route properly, but doesn't add it to routing table (the route never gets to be "best path", although it should be).
View 15 Replies
View Related
Feb 26, 2012
I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.
View 1 Replies
View Related
Dec 6, 2012
I have 3 computers wired to a Netgear R6300. Two of those computers (both running XP SP 3) I added new LAN Gigabit Cards (Tenda TEL9901G) . One recognized the card right away and had no issue connecting to the Internet (using this computer now). The other shows a 1.0 Gbps connection but I can not get any web pages to come up. I can access other computers and devices on the network without an issue on the computer that doesn't connect to the Internet.
If I type in the web address it says "Server Not Found." If I type in the IP address it will come up with the name of the site in the address bar but it still says "Server Not Found." I've tried several times to unplug the router and modem (Motorola Surfboard) and restart everything but the problem was still there. Also, I tried other Ethernet cables and no change. The LAN card drivers are up to date but I don't think the card is the issue since I swapped the new cards (to see if the card was the problem) and it does show a 1.0 Gbps connection. Also, tried uninstall/reinstall, disable/enable the card many times.I didn't change any setting in the router after installing the cards.Here is the ipconfig output:
Windows IP Configuration
Host Name . . . . . . . . . . . . : GATEWAY
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No[code]......
View 6 Replies
View Related
Aug 4, 2011
I finally added wpa personnel security to my network. It worked on all computers until my sons xbox wouldn't connect so I disconnected the modem and router and reconnected. After this, the main computer at the router worked but 3 other laptops wouldn't connect to the network. I finally realized it wasn't broadcasting the ssid.All are working except I have an order computer running xp that previously worked-I hadn't checked it for a week-Ibut I just checked and it doesn't connect to the network. It finds the signal and I put the password in but it won't connect. I've deleted the connection and added it back with no luck.
View 1 Replies
View Related
Jul 20, 2011
I have Linksys WRT320N acting as AP with Mac filtering, yesterday I noticed that even not added Mac addresses can access the network!!The settings in Mac Filter page as following:EnablePrevent PCs listed below from accessing the wireless network.MAC 01: XX:XX:XX:XX:XX:XXMAC 02: XX:XX:XX:XX:XX:XX...when I changed it to "Permit PCs listed below to access the wireless network" no one is able to connect to the network!!!I think the AP is not accepting the MACs I added!I restart the router (Turning on and off) with no luck.Firmware Version: v1.0.03.
View 1 Replies
View Related
Jan 15, 2012
I am having trouble getting 1142 LAP to find the controller. We are running an ASA 5505 at our main campus where the 5508 is located. Each Of our distribution centers have a PIX501 and from there about 3-5 AP's each. The AP's that were primmed before instalation work great, however we need the ability to get the other ones that were already installed and not finding controller to work with out cycling them through main campus. I have opened up UDP ports 12222-12223 and 5246-5246 with no luck.
View 1 Replies
View Related
Nov 29, 2011
we're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.
View 0 Replies
View Related
Feb 16, 2012
I have a problem discovering some ASA firewalls on a network. I have several ASA firewalls on this /24 network, but some of them I can't discover e.g 149.x.x.107 is discovered ok, but 149.x.x.20 I can't discover. It seems that it's not even trying to discover the devices I have problems with. Nothing is shown in the discovery log.
View 11 Replies
View Related
Sep 11, 2012
I have two Core 6509E SUP2T configued as VSS and has two 48 ports fiber blades. I have two 3750s, I have two gig on each 3750 port-channle to po1 and connected to both the core, one link to each core.Now, I was asked ot add two more links on each 3750 switch to make it a total of 4 gigs on each 3750s (all 4 gig ports/uplinks will be in used an dtwo links to core one an dtwo links to core 2).when i added two additional links on 3750s and bundled them to po1, I created another port channel on core and bundeled the additional two gigs on each core to accomodate for the two additional links (ports on core switches are not consequtives).
adding these two additional ports makes the 3750 switches flap between managemnet vlan and po1.now, i am not sure if I must have added the two additional links on the core to teh current port-channel or core!? I have created another port-channel on core to accomodate for this currently!?
View 26 Replies
View Related
Mar 12, 2012
Having an issue with two Cat 2940, they have fiber 100Base-TX. Added a new Cat switch (the second on the VLAN), the existing Cat switch drops the fiber connection.
View 6 Replies
View Related
May 30, 2013
We have a cisco 3750-48 port switch.We have a few SVI's configured and some static routes configured.I had created a new interface vlan and gave it an IP. I can ping the gateway.
Now I want to add a static route to go out that interface.when I add: ip route 10.x.x.x 255.255.255.0 10.52.10.1
it eccepts it (no errors) But, it does not show in the routing table nor in the config? How to add the static route to go out that vlan interface.
View 15 Replies
View Related
Jul 12, 2012
LMS 4.2, W2K8 R2.I was having an issue with discovery adding devices to with corrupt information (seemingly random strings of characters in several fields). While I was trying to clean this up a scheduled discovery kicked off and further exacerbated the issues I was having. Frustrated, I deleted all entries from the discovery schedule until I could get things cleaned up.
Now I want to go back and troubleshoot the discovery process. Trouble is, I can't get discovery to do anything anymore. I disabled all modules but CDP. I added a single seed IP address under the CDP configuration. This is the address of a 3560V2 switch that is not in DCR. When I started discovery it completed in about 2 seconds and didn't discover anything, including the seed device. So I added another 3560V2 as a seed device under global settings. Same results. Thinking that it had been working using scheduled discovery, I set up a schedule and kicked it off that way. Same results. Finally I added one of these seed devices to DCR and let LMS fully learn about it. Ran another discovery. Still no joy.
I started an SNMP debug on the seed devices before starting discovery. I see the SNMP get coming from LMS, the switches respond and the discovery completes with 0 devices discovered.CS Discovery.log contains no meaningful information. Only messages about "No appenders could be found for logger".
View 1 Replies
View Related
Dec 4, 2011
my customer is using Cisco Prime 4.1 as an Upgrade from LMS 4.0 and has made a discovery of a new added Cat 4506E with a Sup 7E and Modules.All the devices have been discovered, excepted the module WS-X4712-SFP+E.Is this card not supported yet ?I could not find any detailled and actual information about the support or not of this module, or about the conditions for the Module support it in Prime 4.1..How ist it possible to proceed to having this module discovered ?
View 1 Replies
View Related
Jan 18, 2012
We are running CiscoPrime LMS 4.1 and I have a problem with PingSweep in Device Discovery. Our company's branches connect to the main site through GETVPN. Discovery through CDP, Routing Table and ARP cannot be used based on the document written by Joseph Clarke [URL] and which is extremely useful. So the only available option is PingSweep.
The loopback interfaces of all the remote GETVPN devices are in the same IP range, so this was configured in Module Settings --> Ping Sweep in the Discovery.
Unfortunately none of the devices get discovered, even though there is icmp connectivity from the server to the loopbacks.
View 1 Replies
View Related
Aug 30, 2011
I am using lms 3.2.where I have added devices manually.Because discovery settings the device are taking some random ip updating the display and hostname.
I want to disable the full discovery settings..
View 3 Replies
View Related
