Cisco :: LMS 4.2 Config Editor Bulk Change
May 4, 2012
I have about 1400 devices in LMS for this one customer.
They have 1200+ IOS devices
200 + catos devices
My problem is we use 2 differnt change scripts in Config Editor for IOS and CATOS. I have a list of all of the IOS and CATOS devises in txt format.
Is there some magical way to just upload the txt files into Cisco works instead of searching for them during the Config Editor batch job creator? I find it takes hours to sort this batch job out
View 0 Replies
ADVERTISEMENT
Aug 22, 2011
We have a new 4507R-E Switch which RME keeps reporting as "CONFIG_CHANGE" each evening. When you click to see the change, the only thing that has changes is the "ntp clock-period".
However, we have configured "ntp clock-period" as an exclude command in RME Config Managment.
View 1 Replies
View Related
Jan 16, 2011
want to be able to change LAN IPs on the fly for telneting into different equipment
View 1 Replies
View Related
Apr 24, 2012
WCS version: 7.0.230.0. I import a map to WCS then open Map Editor, scale the floor and then draw the walls. But the next time (for example the next day) I open Map editor the walls have moved about 1-2 meters. Often to the left and/or up. This mess up my RF predictions. I have tried Internet Explorer 8, Chrome, latest FireFox. Om rare occations the walls are in their correct place, but most often not.
View 1 Replies
View Related
Apr 17, 2011
I have enabled the following attribute...Show Pre-connect Message—Displays a message to the user before the user makes the first connection attempt.Where do you actually enter the text for the message?
View 1 Replies
View Related
Mar 31, 2012
I am running some tests with Cisco Anyconnect 3.0 and trying to configure profiles with profile editor. my understanding is that when we configure a profile under the AnyConnect profile editor, it will be used automatically when client connects to the SSID.
I have downloaded both the profile editor and AnyConnect secure mobility client, when i create a new profile and save it under "Network Access Manager newConfigFiles" folder, it seems the profile does not take any effect when i try to connect to the SSID, I am still propmted for user credentials when I try to connect to the SSID. I read from somewhere that a profile should be created using profile editor when using EAP-FAST, otherwise connection would fail, I did find failures when using EAP-FAST however this does not happen if I use local auth (on wlc or AP).
so the question is how do I suppose to configure profile editor to work properly with AnyConnect? if I have multiple profiles configured under profile editor, then how does AnyConnect know which profile config file to take when i switch between SSIDs?
View 2 Replies
View Related
Mar 9, 2011
Customer is running acs4.2 and need to upload thousands of mac addresses in ACS database for MAB. how can this be done? does cisco suport csv file import in acs4.2 or any other utility?
View 1 Replies
View Related
Jun 28, 2012
Building was recently upgraded from cat3 to cat6 wiring and I'd like to ssh into each Cisco C3750 stack and change every port on the stack to autonegotiate. I can release each port one at a time by doing "no speed" and "no duplex" after selecting each port (interface fastethernet x/x/x) , but it's taking forever as there are many stacks and each stack has a number of 24 and 48 port switches. The stacks are a mix of fastethernet and gigabit ports (C3750 and C3750G switches) if that changes anything command wise.
View 2 Replies
View Related
Aug 17, 2011
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
View 1 Replies
View Related
Aug 27, 2011
I was changing some settings on the router, disabled the WMM QoS, and I can no longer see either the 2.4 or 5GHz networks. I power cycled, tried resetting to defaults but the wireless seems to be dead. I can manage it wired, but that does me no good.
View 2 Replies
View Related
Apr 17, 2012
If i connected the latop to brand new out of the box ASA 5505 through consloe cable and i have a config file on this laptop from other ASA5505, is there anyway i can upload that config file into startup-config of this new ASA5505 through console cable, without using TFTP or FTP?
View 5 Replies
View Related
Nov 15, 2009
I have a Cisco 2811 router and when I turn of the router the running config is lost. I have to the following to get the router running of the start-up config settings.
router#copy start-up running-config
View 9 Replies
View Related
Sep 11, 2011
I'm running into and interesting issue concerning a twice NAT config.
We have a remote site that needs to connect to a server cluster on our end. Using ASDM I have created a NAT rule that uses PAT to map our server addresses to a single IP (this is due to constraints placed on us by the remote site). This in and of itself shouldn't be a problem. The issue is that the VPN tunnel won't come up unless I also map an address to the remote site's sever.
Example:
Appliance: ASA 5510
ASA Version: 8.4(2)
ASDM Version: 6.4(5)
Original Packet:
Source Interface: inside
Destination Interface: outside
Source Address: Server_Cluster
Destination Address: Remote_Server
Service: any
Translated Packet:
Source NAT Type: Dynamic PAT (Hide)
Source Address: Mapped_Server_Cluster_Address
Destination Address: Mapped_Remote_Server_Address
Service: -- Original --
Within the Translated Packet section, if I set Destination Address to the actual remote server address nothing happens when I attempt to bring up the tunnel. However, if I map an address to the remote server, the tunnel begins to come up and then fails during phase two (as the mapped address doesn't match the addressing that has been defined in the remote end's connection profile).
Initially I thought the issue may be due to an IP addressing overlap since both sites are running similar numbers, but the default route statement on our ASA, should contend with this issue. Also, each time I change the NAT rule, I change the connection profile to match those changes.
So, ultimately, what I wish to accomplish is to allow connectivity between my site and the remote site without having to map another address to their remote server. How may I do this?
View 2 Replies
View Related
Jul 8, 2012
I have 2 office buildings using Cisco 800 series routers with a L2L VPN between both. I'm upgrading the router to an ASA5505 at one of the offices but can't figure out the L2L VPN on the ASA. Specifically, can't figure out how to set the pre-shared key. On the Cisco 800 it's:That doesn't seem to work on the ASA. Here is my current config on the Cisco 800. [code]
View 9 Replies
View Related
Sep 14, 2011
I am converting one PIX config (in 6.2) format to 8.4 format manually.I am stuck at the following statements.
---------------------------
global (outside) 1 192.168.21.100-192.168.21.150 netmask 255.255.255.0
global (outside) 1 192.168.21.44 netmask 255.255.255.255
nat (inside) 0 access-list 101
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-list 101 permit ip host 10.130.101.2 10.132.102.0 255.255.255.0
-----------------------------
My understanding from the old config file was that any traffic coming from source 10.130.101.2 to destination 10.132.102.0 would NOT be translated and this shall remain the same in 8.4.How can I rewrote the NAT commands?
View 5 Replies
View Related
Feb 7, 2013
How do I turn off "logging esm config"? I tried conft no logging esm config and that worked for the moment, but when the switch reboots, or I run reload, it comes back.What does that do anyway? This switch was giving an out of memory error and seemed to be flooded with messages, so I trying to turn logging off/lower the log level.
View 5 Replies
View Related
Aug 15, 2011
my config and all the show's ive run sofar tryign to figure this out, but the policy map isnt matching the traffic for some reason
View 9 Replies
View Related
Feb 6, 2007
I have tried the config-register command and it is not available. Here is part of the show ver command. I want to change the config-reg from 0xF to 0x2102.I have run into this before but don't remember how to correct it.....I think I have to use the boot command but not sure. Here it the output show ver Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
System returned to ROM by power-on?System image file is "flash:c2960-lanbase-mz.122-25.FX/c2960-lanbase-mz.122-25.FX.bin"cisco WS-C2960-24TT-L (PowerPC405) processor (revision A0) with 61440K/4088K bytes of memory.last reset from power-on
4 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.64K bytes of flash-simulated non-volatile configuration memory.
Model number : WS-C2960-24TT-L
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(25)FX C2960-LANBASE-M
Configuration register is 0xF
View 6 Replies
View Related
Aug 2, 2011
We have two offices in the US and one in Mexico. Our site in Mexico connects to our headquarters in the US over an AVPN/ MPLS circuit .Mexico has a separate Internet connection through TelMex. There is an ASA 5510 at headquarters and an ASA 5505 in Mexico. We have a fail over VPN set up in the ASAs for times when the MPLS circuit goes down. All Internet traffic in Mexico is supposed to be routed to the TelMex connection. All company traffic is supposed to be routed to the Cisco router. ASA is supposed to be last resort route. We have a fail over VPN set up in the ASAs for times when the MPLS circuit goes down. (Or at least we did until I had someone work on the configuration) Everything had been working fine for the last 4 years.
Yesterday when the MPLS went down, so did their Internet connection. I realized the Internet traffic is now coming through the MPLs circuit to head quarters and out our ASA. Obviously there is a problem with the configuration. I do not have enough experience to figure this out. I have attached the configs and the routes for both the ASA and the router.
View 11 Replies
View Related
Jul 31, 2011
I tried to deploy configuration templates with Cisco LMS Template Center, due to the 10 Cool LMS Tricks to better manage your network i am able to do it now.Just i don't know why, after deploying these templates the configuration is not save to the startup-config.another problem i have with the snmp-server location configuration. It seems my template does not support spaces in the textbox. Any way to put spaces in the snmp location?
<parameter name="snmp-location">
<description>SNMP Server Location</description>
View 3 Replies
View Related
Jul 18, 2012
I have run a netconfig jobs in LMS 4.2.1 with these settings: [code] After running the job the "Device Details" of the jobs say "Successful Devices" for all three switches:"Deploy successful (Primary Login Succeeded / Primary Enable Succeeded )" For the devices switch-1 and switch-2 I get the desired output: [code]. Why there is no output although the job is successful?
View 3 Replies
View Related
Feb 20, 2011
I’m currently training to take my CCNA, So for the reason I’m here, I have just been asked to take over the company network.And I need to know how I go about configuring some base level routers.I have 3 remote sites and 1 main site, all these routers are using 857’s, with a VPN tunnel between them, this is running all OK and working fine,But my boss has decided to have a second ADSL line installed in the main site for failover.How do I go about configuring this, ie how do the VPN’s terminate on the other router when the main one goes down?
View 1 Replies
View Related
Apr 1, 2013
If I have a PI 1.2 system that has multiple interfaces configured I can upgrade to PI 1.3 and both interfaces remain and I can see both under the admin webpage under appliance interfaces. But if I do a fresh install of PI 1.3 I can only configure one interface. The commands fail from the cli to configure anything but gigabitethernet 0. Are multiple interfaces not supported in PI?
View 2 Replies
View Related
Apr 14, 2012
I'm working on tweaking the config on a 2911 ISR G2 with a ZBF and am looking for some input. Our main issue right now is that the router is having performance issues once we hit certain troughput thresholds.
Right now, I have an inside-outside inspect set to look at all FTP, TCP, UDP, ICMP, DNS, SIP and HTTP (I know, its a bit redundant) traffic and do inspection on it then pass all other traffic. From a company policy, we are not filtering ANY traffic of any kind going outbound. (I know this isn't best practice but that's another battle for another day.)
Additionally, I have an outside-inside policy set to pass GRE traffic to an internal PPTP server (I know, not secure but its what we have.) then I have another inbound policy to inspect all traffic coming through that matches a specific ACL that defines all of the holes we're poking for hosting various functions on internal servers, etc.
could I, should I, why would or wouldn't I simply pass traffic that matches specific ACLs or whatever instead of how we are presently doing a lot of inspection?If I was to simply pass matching traffic instead of doing the inspect, would I see a substantial performance increase/workload decrease ont he 2911?
What are the security ramifications related to simply passing traffic instead of doing the inspection?
View 2 Replies
View Related
Jun 17, 2012
I have a task for a config I have not done before. I'm replacing an older 831 and PIX with a Cisco 881 router with Firewall feature set. The router receives its public IP address dynamically and there is a static public IP range also assigned with a couple of NAT statements on the PIX for a few public IP's.I'm ok with the core router config but the range is where I'm a little stuck. Current setup is as follows
Internet ---------- Router( Public intf Dynamic IP----internal intf Range IP)Router-------------PIX (outside intf Range IP---------Inside intf private net)Pix-------
As per the aboive the PIX had a public IP address from the range on the outside interface with a default route to the Router inside interface which uses a public range addres.
With my proposed config I've setup the outside interface as dynamic and just created my nat statements for the Range IP's. I believe I'm correct that I do not need to actually have a Range IP address configured on the router?
View 2 Replies
View Related
Nov 19, 2011
suppose i have 2 hub location and one spoke and i want to config DMVPN between them and want to keep 1 HUB as active and 2nd HUb as passive then how its possible.
View 2 Replies
View Related
Feb 27, 2012
Powered up device.Held reset for 30 seconds.Power cycled device.Entered 192.168.1.245 into ChromeChrome won't connect
View 1 Replies
View Related
Dec 17, 2012
I'm upgrading ASA firewalls from a 5510 (running 8.2.2 code) to a 5515-X (running 8.6.1 code). What is the best way to move the existing config to the new firewall? Can I simply copy it?
View 2 Replies
View Related
Jan 26, 2012
I am using a couple cisco sg300 28P switches along with a sonciwall firewall/router. The sonicwall was already in place and working so they didnt want to replace it. I understand how to configure the vlan on the sonicwall, but could use some info on the cisco. I would basically like to create 3 vlans, 1 default for management, 2 for pc's on lan, and 3 for the cisco spa504g phones/'voip. Would i just go into the vlan managment, configure the 2 new vlans and give them two id's? These offices have one network drop, so the phones and pc's will be sharing the switch ports, however the phones have a setting to configure the vlan id so they know which one theyre on. Is there anything i need to do after that? I want to make sure that vlan 3 has the highest priority becuase its voice, is there some qos configurations i need to make on that switch as well? Also, the port that links the two cisco swtiches together, does that need to be set as "trunk" port? I understand what vlans are, but its just the first time ive run into these cisco models. .
View 0 Replies
View Related
May 13, 2013
I get stuck in one case. One of my customer has two FTTH lines. I have to config PPPoE in routers. In one line I config succesfully, but one line never up. I call to ISP they ask me to config extactly VLAN id 10 in the physical subinterface. But in subinterface there is no command "pppoe-client dial-pool-number". I check the old modem FTTH, they also config VLAN 10 in Wan interface. I tell ISP why we have the same two FTTHs, but two differrent config ways. ISP says because the two line run in two different infrastructure, two different devices. I don't know how to do now? stay in customer side or ISP side. Here is my PPPoE config:
interface FastEthernet0/0
no ip address
duplex auto
[Code].....
View 4 Replies
View Related
Apr 25, 2012
I have pix 515e locate in office w/ IPSec VPN service ,that just for out of Office to access email
I wanna know how to config the VPN user thru the office Internet to access the web
Such I'm in china to access Facebook while I connected the VPN
View 0 Replies
View Related
Jul 13, 2012
WLAN Controller 4400 series connected to Catalyst 4506 on vlan 12. Access switches got managment vlan 5 and vlan 1 shutdown. what config is needed on ports were Access points are connected. Access switch is in vtp client mode.
View 5 Replies
View Related
Sep 27, 2011
we are looking at having a 172.168.40.0 network on our LAN. BUT i want to tie it down to JUST accessing the internet!So i'm looking for some ideas on how that ACL would look like.i have an ASA 5510 as our firewall and i've attached a simple network diagram for reference.
View 7 Replies
View Related
