Cisco :: ISRG2 2901 - How To Create Bulk Configuration Files From Template For Staging

Aug 17, 2011

We have created a sample configuration for ISRG2 2901 Router.  The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
 
From searching we have found the following tools:
 
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?

2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.

3)  Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.

4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.

5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.

View 1 Replies


ADVERTISEMENT

Cisco WAN :: Create Two VPN Tunnels From 2901 Router?

Feb 18, 2013

I have a client who would like to create a two VPN tunnels from one cisco 2901 router. One to the HQ and one to the DR. Is this possible?

View 4 Replies View Related

Cisco WAN :: ASR-1002 Base Configuration Template

Sep 13, 2012

I am working up a configuration template for an install I am doing in a couple weeks and wanted to take a look at the base config of an ASR1002. 

View 1 Replies View Related

Cisco Routers :: Configuration Template For SRP521W

Nov 3, 2010

Any recommendation for creating a configuration template for the SRP521W?  I can use the Admin-->Backup Config to get a xxx.cfg file, but I cannot edit it with notepad++. Also, i know the config can be view via view-source: [URL], but how would I load a modified copy of this back to the router?

View 8 Replies View Related

Cisco WAN :: VPC Configuration Template With Two Core 6509 Switch

Jan 3, 2013

What is the VPC configuration template with two core 6509 switch.Pls find the attachment for Network topology.

View 3 Replies View Related

Cisco :: LMS4.1 SNMPV3 Configuration Template Required

Apr 6, 2013

Who can give me a SNMPv3 configuration template.I tried many times has been a problem

View 5 Replies View Related

Cisco :: LMS 4.1 - Template Center Configuration Filter Based On User Input?

Nov 30, 2011

is it possible to create some Configuration Template that pushes configurations only to switches or interfaces with a certain actual existing configuration element- e.g. a certain interface description?
 
Example:Template Parameter Mask asks User for an Interface Description- the User enters e.g. "A101" Second Parameter asks User for an access vlan to deploy to this interfaces- e.g. " 10"
 
So during deployment LMS make a "switchport access vlan 10" only on interfaces that contain the description "A101".
 
I know this is possible via Compliance Check/Deploy, but we want to make this more User friendly and flexible so that e.g. a Helpdesk Member can use this Template to easily change the VLAN based on a interface description (which refers in this case to a CAT5 outlet label).

View 1 Replies View Related

Cisco WAN :: 2901 - QoS Configuration

Feb 23, 2011

I am trying to come up with a config for implementing QoS over a 512 kbps WAN link that will traverse voice and data traffic for now. I am using a Cisco 2901 router with 15.1(3)T IOS on it. my config is below
 
class-map match-any DATA-PRIORITY match protocol citrix match protocol sshclass-map match-any VOICE-CONTROL match protocol skinny match protocol mgcp match protocol h323class-map match-any VOICE match protocol rtp audio class-map match-any ANY match any [ code]... 

THE ISSUE IS : when i add in the service-policy output WAN- QOS- POLICY command , i get the error " insufficient bandwidth 256kbps for bandwidth guarantee (180)". if i take out the " bandwidth 512 " command out then i get no issues adding the above command on interface g0/1

View 3 Replies View Related

Cisco VPN :: Create A Site To Site VPN Using 2901 And Linksys Router?

Mar 28, 2012

I am trying to create a site to site VPN using a cisco 2901 and Linksys router.I have the VPN configured and connected and I can ping gateway to gateway. However, from the Cisco I can't ping any of the devices beyond the gateway.Example, from the cisco I can ping 192.168.5.254 (gateway IP address) source gig 0/1 and it works great.
 
However if I ping from the cisco 192.168.5.50 (end user PC) source gig 0/1 it doesn't work.I have created a client VPN and that works perfectly.Below is my config.

crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2

[code]....

View 1 Replies View Related

Create A Cache Server To Caching Downloaded Files?

Mar 28, 2013

How can I install cache server for caching downloaded files ?I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8 )

View 1 Replies View Related

Cisco :: 2901 Terminal Server Configuration

May 12, 2012

I have just purchased 2901 with HWIC-16A and 2 CAB-HD8-ASYNC Terminal Server to manage 16 (connect via console) cisco deivces.
 
Plese find attached the config file. I could not find proper docs on setting up this device as a terminal server. I have followed the following link but did not work.
 
[URL]
  
There are 16 Async (0/0/0 - 15) interfaces and also the following lines.
line 2line 0/0/0 0/0/1line 0/0/2 0/0/15
  
How can I connect to other Cisco devices via the terminal router?

usage of above 16 Async interfaces and lines.

View 4 Replies View Related

Cisco WAN :: 2901 / DMZ Public Web And Dns Servers - NAT Configuration?

Jun 24, 2011

We have a Cisco router 2901 with 10M dedicated link on Gi0/0 interface, 3 VLANs on Gi0/1 interface. The Gi0/1 is subinterfaced for default, LAN and DMZ segments.LAN is assigned 172.16.1.0/24 and DMZ 192.168.1.0/24. We host a web server (192.168.1.11) and dns server (192.168.1.18) on DMZ VLAN. On the same WAN interface we have confiugured PAT and NAT. For outside queries to DNS and WEB servers everything works fine but when we try to open the website on our web server from internal LAN, we can´t do it.
 
When PINGing the web server by its IP address 192.168.1.11 or by the FQDN, the requests respond fine. The domain.com and [URL] resolve and respond with public IP address of our WAN link as the DNS server is configured. But when we try to open [URL] in the Internet browser the website does not open.
 
What could be the issue? Can be anything with NAT or PAT configuration?

View 5 Replies View Related

Cisco WAN :: Best Design For Simple Configuration 2901

Nov 20, 2011

I'm new to routing and cisco in general.  I'm inheriting a rather simple setup but would like to approach the next steps with a good strategy.  Currently we have a 2901 router with public IP's on bother interfaces.  The internal facing interface is our gateway for some webservers and a firewall.  Not we are looking to add a colocation site and establish a site to site VPN using another 2901. My goal is to have the colocation use the same internal 10.100.0.0/23 network.  My question is what is the best way of going about this since the router at the main site has public IP's on both interfaces?  Do I need to multi-home the internal facing interface?  If so, what else needs to be done?

View 1 Replies View Related

Cisco WAN :: High Availability Configuration Between 2 2901 Routers

Jul 7, 2011

I have to install and configure two 2901 routers at different location with high availability.  These 2 routers would be connected through WAN, now I would like to configure high availability bwtween two routers.
 
I have attached a small diagram of the placement of 2 routers.
 
how do I configure high availability between these 2 links or routers.

View 3 Replies View Related

Cisco :: LMS 4.2 Config Editor Bulk Change

May 4, 2012

I have about 1400 devices in LMS for this one customer.
 
They have 1200+ IOS devices
200 + catos devices
 
My problem is we use 2 differnt change scripts in Config Editor for IOS and CATOS. I have a list of all of the IOS and CATOS devises in txt format.
 
Is there some magical way to just upload the txt files into Cisco works instead of searching for them during the Config Editor batch job creator?  I find it takes hours to sort this batch job out

View 0 Replies View Related

Cisco AAA/Identity/Nac :: Bulk Upload Mac Address To ACS 4.2

Mar 9, 2011

Customer is running acs4.2 and need to upload thousands of mac addresses in ACS database for MAB. how can this be done? does cisco suport csv file import in acs4.2 or any other utility?

View 1 Replies View Related

Cisco :: C3750 / IOS - Set Ports To Auto-negotiate In Bulk?

Jun 28, 2012

Building was recently upgraded from cat3 to cat6 wiring and I'd like to ssh into each Cisco C3750 stack and change every port on the stack to autonegotiate. I can release each port one at a time by doing "no speed" and "no duplex" after selecting each port (interface fastethernet x/x/x) , but it's taking forever as there are many stacks and each stack has a number of 24 and 48 port switches.  The stacks are a mix of fastethernet and gigabit ports (C3750 and C3750G switches) if that changes anything command wise.

View 2 Replies View Related

Cisco WAN :: New ISRG2 2921 Restarts Very Often?

Apr 9, 2012

from todays morning my 2921 is restarting about one time per two hours:
 
uptime is 1 minute
System returned to ROM by bus error at PC 0x23A49808, address 0x0 at 15:45:07 CET Tue Apr 10 2012

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: ISRG2 Runs Out Of Memory

Sep 5, 2012

ISRG2  (c2951-universalk9-mz.SPA.152-4.M1.bin) has 512 MB of DRAM. Periodically it runs out of memory: [code]
 
 1. Why "show process mean" command shows less memory than 512 MB? Processor Pool (248 MB) + I/O Pool (58 MB) ~ 310 MB only?
 
2. *Init* process holds more memory than normal (202 MB). What may cause this? 

View 2 Replies View Related

Cisco WAN :: 4510 R - Clear Configuration Files On Switch To Factory Defaults

Aug 22, 2011

I have a 4500 Catalysts switched (4510 R ) that require the configuration to wiped back to factory default setting, How would i go about clearing the configuration on each module board
 
The chassis consists of
 
2 x Supervisor engines v WS-X4516 with Flash cards
4 x WS x84448 GB RJ45 48 port switches
1 x  WS x4306 GB Switch Module
  
I also have a Catalyst 6500 that requires each module within the chassis to we wiped back to factory defaults
 
1 x Supervisor engine WS X 6k SUP 2- 2GE
1 x WS X6416 G-Bic 16 port GB Ethernet
4 X WS X 6148 CE-TX Base T GE 10/100/1000
1 x WS X6348 48 Port Inline Power Capable
   
And i have a Catalyst WS - C 6513 with the following Module card that need the configuration wiped to Factory defaults as well

View 3 Replies View Related

Cisco Firewall :: Migrating PIX515E To ASA5520 - Update BIN Files In Configuration For ASA?

Jul 18, 2011

I am in the process of migrating my config from my PIX running 8.0(4) to my ASA5520 running 8.2(1).  I have converted the config so that it is ready for the ASA.  I noticed the "boot system flash:" and "asdm image flash:" command references the old PIX files.  Do I need to update these or will they be updated when the ASA reboots with the new config?

View 2 Replies View Related

Cisco WAN :: Specific License In Order To Enable NBAR2 In ISRG2 892 With IOS

Aug 22, 2012

I was wondering to understand if there is an specific license in order to enable NBAR2 in my ISRG2 892 with IOS 15.2(3)T. If not, what is the basic license I need to have for NBAR2 ?

View 5 Replies View Related

Cisco WAN :: Maximum ARP Cache Entries For ISRg2 1921 And 887VA Devices

Feb 23, 2011

We are looking to find the number of maximum ARP Cache Entries for 1921 and 887VA series Routers. Do they go upto a limit that memory allows, or is there a maksimum arp cache entry limit for both of the router types?

View 3 Replies View Related

Cisco Switching/Routing :: 2911 ISRG2 Can Supports Throughput Of 150Mbp

Feb 13, 2012

I like to know what is throughput of the Cisco 2911, cisco 2921 & cisco 2951 routers. I can see ISRG2 can supports the throughput of 150Mbps.

View 1 Replies View Related

Cisco VPN :: ISRG2 2900 - How To Count Number Of Cumulative VPNs On 2900

Aug 25, 2011

If there is a router ISRG2 2900 with SEC license and without HSEC license, there is a limit in count of cumulative encrypted VPN tunnels of 225. Which commands can show us a number of current tunnels on the router, so we can see if we are near this limit of 225?

View 4 Replies View Related

Cisco :: LMS 3.2 RME Compliance Template

Feb 3, 2013

Using LMS 3.2, I've started learning how to use the compliance templates.is there a regex to ignore case? For instance, if I have the line:

clock timezone est -5  in some configs, and
clock timezone EST -5  in others
 
is there a way to tell the template that upper case and lower case are acceptable matches?

View 1 Replies View Related

Cisco :: LMS 3.2 Compliance Template Syntax

Nov 2, 2011

I want to add the command "no logging event link-status" to all switchport mode access ports EXCEPT for the ones with the following switchport access vlans: 4022,4032,4042,4052,4072 & 4082. How do I create a compliance template to do this? LMS 3.2, RME 4.3.1

View 6 Replies View Related

Cisco :: WCS 7.0 Cannot Edit AP Migration Template

Jun 24, 2010

Have upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
 
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.

View 7 Replies View Related

Cisco :: LMS 3.2.1 Compliance Template Range Statement

Jun 5, 2013

I am trying to create a very basic template in compliance manager that checks for interfaces that aren't members of specific VLANs. VLAN 10 being one of them.  I want to match interfaces assigned to VLAN 20.  According to the documentation I have read, the following range statement should work because 10 falls between 3 and 19:
 
Submode: interface [#.*Ethernet.*#]
- switchport access vlan [#[3-19]#]
 
With the preceeding statement, however, interfaces assigned to both VLAN 10 and VLAN 20 are matching the rule. With this specific rule (not a range), only interfaces w/VLAN 20 are processed by the template, which is expected.  We actually have numerous VLANs that we want to exclude/include.  I only mentioned VLANs 10 and 20 for brevity. 

View 1 Replies View Related

Sharing :: Cannot Access Files On Server Files From Laptop?

Apr 17, 2012

I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to

View 11 Replies View Related

Website Template For Photography And Comments?

Nov 26, 2011

Me and some friends of mine talking about making a small website for us to share our photos together and be able to add comments under each photo, for example or even better with a simple forum. I have a bit experience making website, but we prefer to use web templates / packages for that also we would be able to add comments( built-in Code, no external links for those codes be needed). We prefer to have our website sure we know there are thousands of free photo-sharing websites out there.

View 2 Replies View Related

Cisco :: Where To Download Router Template On Packet Tracer

Oct 20, 2011

Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.

View 4 Replies View Related

Cisco :: PPPoE MTU Restriction Be Applied At Virtual Template

Aug 1, 2012

I get that to avoid fragmenting the packets we need to reduce the MTU to 1492, fine, but should the MTU restriction be applied at the virtual-template (server)/dialer (client) or on the physical ethernet interfaces?If I apply it to one or the other, which takes precedence? Should I just apply it to both the virtual/dialer interfaces and the ethernet interfaces?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved