Website Template For Photography And Comments?
Nov 26, 2011
Me and some friends of mine talking about making a small website for us to share our photos together and be able to add comments under each photo, for example or even better with a simple forum. I have a bit experience making website, but we prefer to use web templates / packages for that also we would be able to add comments( built-in Code, no external links for those codes be needed). We prefer to have our website sure we know there are thousands of free photo-sharing websites out there.
View 2 Replies
ADVERTISEMENT
May 3, 2012
The business i work for uses a "Do it myself" template for their website. (this is through their webhosting company). I can not add FTP to this website, we have to completely redo it with code and whatnot in order to have access to FTP. We would like users to download a template from our website (no problem) and then send us their artwork files back to us. These can be upwards of 150mb. Is there another option that i am not aware of to do this? Can't use email, has a limit of 25mb.
View 6 Replies
View Related
Jun 28, 2012
D-Link released firmware version 1.05 build 08, located here: Firmware v1.05b08
View 2 Replies
View Related
Feb 3, 2013
Using LMS 3.2, I've started learning how to use the compliance templates.is there a regex to ignore case? For instance, if I have the line:
clock timezone est -5 in some configs, and
clock timezone EST -5 in others
is there a way to tell the template that upper case and lower case are acceptable matches?
View 1 Replies
View Related
Nov 2, 2011
I want to add the command "no logging event link-status" to all switchport mode access ports EXCEPT for the ones with the following switchport access vlans: 4022,4032,4042,4052,4072 & 4082. How do I create a compliance template to do this? LMS 3.2, RME 4.3.1
View 6 Replies
View Related
Jun 24, 2010
Have upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.
View 7 Replies
View Related
Sep 13, 2012
I am working up a configuration template for an install I am doing in a couple weeks and wanted to take a look at the base config of an ASR1002.
View 1 Replies
View Related
Jun 5, 2013
I am trying to create a very basic template in compliance manager that checks for interfaces that aren't members of specific VLANs. VLAN 10 being one of them. I want to match interfaces assigned to VLAN 20. According to the documentation I have read, the following range statement should work because 10 falls between 3 and 19:
Submode: interface [#.*Ethernet.*#]
- switchport access vlan [#[3-19]#]
With the preceeding statement, however, interfaces assigned to both VLAN 10 and VLAN 20 are matching the rule. With this specific rule (not a range), only interfaces w/VLAN 20 are processed by the template, which is expected. We actually have numerous VLANs that we want to exclude/include. I only mentioned VLANs 10 and 20 for brevity.
View 1 Replies
View Related
Nov 3, 2010
Any recommendation for creating a configuration template for the SRP521W? I can use the Admin-->Backup Config to get a xxx.cfg file, but I cannot edit it with notepad++. Also, i know the config can be view via view-source: [URL], but how would I load a modified copy of this back to the router?
View 8 Replies
View Related
Oct 20, 2011
Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies
View Related
Aug 1, 2012
I get that to avoid fragmenting the packets we need to reduce the MTU to 1492, fine, but should the MTU restriction be applied at the virtual-template (server)/dialer (client) or on the physical ethernet interfaces?If I apply it to one or the other, which takes precedence? Should I just apply it to both the virtual/dialer interfaces and the ethernet interfaces?
View 6 Replies
View Related
Aug 8, 2012
I am trying to apply WLAN template from NCS to two WLCs 5508 and I receive this message."Another WLAN with same SSID and either WPA1/ WPA2/ WPA1+WPA2 is enabled. Please change the Layer 2 security policy."The template has layer 2 security with WPA+WPA2 enable and 802.1x.I have other WLAN template with other name and other SSID with the same security policies with no problem to apply.
View 2 Replies
View Related
Jan 3, 2013
What is the VPC configuration template with two core 6509 switch.Pls find the attachment for Network topology.
View 3 Replies
View Related
Apr 6, 2013
Who can give me a SNMPv3 configuration template.I tried many times has been a problem
View 5 Replies
View Related
Oct 13, 2011
LMS 3.2.1, what is the correct baseline template syntax to accomplish the requirement 2:
Requirement 1
• Check if the router is running H323: You can do it looking for the command “h323-gateway voip interface”. If that command is found on a router then it is an H323 voice gateway
• Configure the global command: voice class h323 1
[Code]...
View 1 Replies
View Related
Feb 4, 2013
According to cisco manual in order to change SDM template i need to reboot switch, but when i have C3750-X stack do i need to reboot stack or maybe will be enough reboot in sequence the stack members?
View 3 Replies
View Related
Jun 11, 2013
I attempted to assign a User Roles template to a## 2504 controller and if failed with message stating controller version not supported. My current WCS version is 7.0172, if I upgrade to the lastest version will that resolve the template issue?
View 4 Replies
View Related
Sep 21, 2011
Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.
View 1 Replies
View Related
Nov 30, 2011
is it possible to create some Configuration Template that pushes configurations only to switches or interfaces with a certain actual existing configuration element- e.g. a certain interface description?
Example:Template Parameter Mask asks User for an Interface Description- the User enters e.g. "A101" Second Parameter asks User for an access vlan to deploy to this interfaces- e.g. " 10"
So during deployment LMS make a "switchport access vlan 10" only on interfaces that contain the description "A101".
I know this is possible via Compliance Check/Deploy, but we want to make this more User friendly and flexible so that e.g. a Helpdesk Member can use this Template to easily change the VLAN based on a interface description (which refers in this case to a CAT5 outlet label).
View 1 Replies
View Related
Apr 12, 2012
We are trying to get the waep template (default no changes) from the Cisco WebAuth bundle to work on a 5508 controller.
We've setup the controller to use the custom login.tar that comes with the waep template folder in the bundle. We setup the WLAN to work off the global template and we used the config network web-auth secureweb disable command to allow only http rather than https (which is supposed to work in 7.2 code)
When we test with the custom bundle, we get no answer from the controller, just a url of [URL]
If we turn custom off, and use internal everything works...
Just to be clear.. we aren't looking for authentication (user and pass) we are trying to do the enter your email and click accept to the aup method.
View 5 Replies
View Related
May 19, 2013
Make a netflow template to get information about http code errors in a nexus 7010?
View 3 Replies
View Related
Jul 9, 2012
I created a LAP Template in NCS to configure some new 1142 LAPs that were installed in a remote office. These LAPs need to be in Flex Connect mode with V LAN support. The template is being applied with partial success on every access point. Details of the partial success say the Flex Connect Parameters fail with the following error.
Provision Failure: { URL}.Object Not Found Exception cannot be cast to [URL]
Am I doing something wrong? The Flex Connect portion of the template has V LAN Support enabled, Native V LAN ID, and the Profile Name- V LAN Mappings configured.
Prime NCS version 1.1.1.24 Access Points are AIR-LAP1142N-A-K9s running 7.2.110.0
View 3 Replies
View Related
Aug 17, 2011
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
View 1 Replies
View Related
Dec 18, 2012
You can set the ME3400 switch set to the Routing SDM template such that it support PBR. That is done in the ASICs, right? Because if it is done in software the switch could quickly become overwhelmed.
View 2 Replies
View Related
Aug 12, 2011
I cant access any website or use any programs like msn, etc on my computer using the router,it says the connection is good but whenever i try to go to any website it says the web page may be down,This webpage is not available.Here might be temporarily down or it may have moved permanently to a new web address.
View 1 Replies
View Related
Jan 19, 2013
i forget username and password, what i should do...?
View 1 Replies
View Related
Jan 12, 2013
Everytime I type in the 192.168.1.1 address, I receivea message "Internet Explorer Cannot Display Webpage". I have tried this several times and it doesn't connect me to the website.
View 6 Replies
View Related
Jan 13, 2013
I have set up a router for wireless internet so I may down load and use my Tablet. When I punch in my 192 #s I get a search screen and I don't know what to do to continue to set up.
View 1 Replies
View Related
Dec 11, 2011
I cannot get on google Bad Request (Invalid Hostname). This has happened to me for quite a while now, and i cannot do anything to fix it.
View 1 Replies
View Related
Feb 26, 2011
i want to build a website, but i don't have money
View 1 Replies
View Related
Jan 21, 2012
for sometime I have not been able to access any google website. I can access all others?
View 5 Replies
View Related
Aug 15, 2011
I'm trying to reach Celebs4.UsThe first time I tried (earlier today), I was able to access, but when I clicked on one of the images I recieved a "The connection has timed out" error. I have not been able to open the site at all since that very first time.I have done the following:- tested it in both FF and IE- run tracert (seems like the problem is on the site's server end, but everyone else is able to connect fine)- flushdns- clear cachemy tracert: :: pokIt
View 5 Replies
View Related
Feb 20, 2013
So recently i decided to try to play some rune scape since i played it through my childhood and wanted to try again, it went fine first 2 days, and after that i can't access the website at all. I've tried to ping it, and all that comes up is that request timed out, tried flush dns, restarting router/modem and even to change ip (which i did not succeed with).However i found this "solution" url... and reading the top comment, it says that "This problem occurs when viewing the same site over a router from more that one computer or application at the same time for a period of time." And i have done exactly that in the past days the site was working.
View 5 Replies
View Related
