Cisco WAN :: ASR-1002 Base Configuration Template
Sep 13, 2012I am working up a configuration template for an install I am doing in a couple weeks and wanted to take a look at the base config of an ASR1002.
View 1 Replies
ADVERTISEMENT
Cisco Routers :: Configuration Template For SRP521W
Nov 3, 2010Any recommendation for creating a configuration template for the SRP521W? I can use the Admin-->Backup Config to get a xxx.cfg file, but I cannot edit it with notepad++. Also, i know the config can be view via view-source: [URL], but how would I load a modified copy of this back to the router?
View 8 Replies View RelatedCisco WAN :: VPC Configuration Template With Two Core 6509 Switch
Jan 3, 2013What is the VPC configuration template with two core 6509 switch.Pls find the attachment for Network topology.
View 3 Replies View RelatedCisco :: LMS4.1 SNMPV3 Configuration Template Required
Apr 6, 2013Who can give me a SNMPv3 configuration template.I tried many times has been a problem
View 5 Replies View RelatedCisco :: LMS 4.1 - Template Center Configuration Filter Based On User Input?
Nov 30, 2011is it possible to create some Configuration Template that pushes configurations only to switches or interfaces with a certain actual existing configuration element- e.g. a certain interface description?
Example:Template Parameter Mask asks User for an Interface Description- the User enters e.g. "A101" Second Parameter asks User for an access vlan to deploy to this interfaces- e.g. " 10"
So during deployment LMS make a "switchport access vlan 10" only on interfaces that contain the description "A101".
I know this is possible via Compliance Check/Deploy, but we want to make this more User friendly and flexible so that e.g. a Helpdesk Member can use this Template to easily change the VLAN based on a interface description (which refers in this case to a CAT5 outlet label).
Cisco :: ISRG2 2901 - How To Create Bulk Configuration Files From Template For Staging
Aug 17, 2011We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
Cisco WAN :: 1921 - Configuration With IP Base Software
Jan 31, 2011I'm having a problem when configuring this cisco router 1921 with an ip base software. Accordingly with the Cisco software adviser this software allows to configure the l2tp Client Initiated Tunneling. But configuring the router the commands are not recognized:
Router(config)#pseudo wire-class L2TP_PSEUDO
^
% Invalid input detected at '^' marker.
Router(config)#interface Virtual-PPP1.
Cisco Firewall :: ASA 5505 - DMZ Configuration With Base License
May 24, 2011My ASA 5505 base license allows for three VLANs, the third one can only initiate traffic to one other VLAN (as specified by no forward interface vlan <number> on the third VLAN). This doesn't mean it can't "access" the other VLAN, it just can't initiate traffic to it. A lot of people get that wrong.Let's say you've got three VLANs, one is OUTSIDE, two is DMZ, and three is INSIDE. On the second VLAN would I enter the no forward interface as vlan 3, then set the name via the nameif command and everything will work just fine. The DMZ will not be able to initiate traffic to the INSIDE, but will to the outside, and assuming you have your ACLs and NAT set up properly, it will be able to respond to traffic from the INSIDE.
Would that be best practice or would I enter the "no forward" interface as in VLAN 1, thus is being able to respond to traffic from the outside as opposed to the inside.
I had a DMZ set up but since there was an intrusion into my network, I am building it again.
Cisco Wireless :: Base Configuration For 1811w Router?
Mar 2, 2009Need basic wireless configuration for a SOHO Cisco 1811W router? I just need the wireless to connect to the base wired LAN - with both WEP and MAC authentication. And - can the MAC auth. parameters be configured via CLI and not have to use either SDM or CP? I can access the router via SDM - but the Wirless Application will not fire up - and CP doesn't work at all.
View 18 Replies View RelatedCisco Firewall :: ASA 5510 Context Base Configuration In HA Mode?
Jun 10, 2012configure the Firewall ASA 5510 in context based configuration in HA Mode with two different subnet....
IP Details are below.....:
interface Ethernet0/0
nameif outside
security-level 0
[Code].....
Cisco Application :: ACE20-MOD-K9 With Base Licenses In FT Configuration In Layer2 Mode
Oct 6, 2011During high throughput times (nightly, when backup runs) we see packet drops on the network. We think it's the ACE module that drops. We use 2 ACE 20-MOD-K9 with base licenses in a FT configuration in Layer2 Mode.Now I found an interesting statistic on the ACE: [code] How to reset this counter?
View 4 Replies View RelatedCisco Switching/Routing :: Feature Set LAN Base / Lite (2960) And LAN / IP Base (3650X)?
Mar 28, 20121)For 3650X I found some contradiction in the Q&A about feature set LAN Base vs IP Base:
LAN Base: Can I do static IP routing ?
LAN Base: SVI => is this for intervlan routing ?
2)For 2960, there are 2 flavors (LAN lite and LAN BASE) Q: Can I do static routing on one of these flavors ?
Cisco Switching/Routing :: Downgrade 3750X With IP Base To LAN Base For Stacking
May 6, 2012I have a WS-C3750X-12S-S (IP Services) that I THINK I'd like to downgrade to LAN Base so I can stack it with a WS-C3750X-48T-L that is already LAN Base..
View 4 Replies View RelatedCisco Switching/Routing :: 2960 Switch LAN Base To IP Base
Nov 14, 2011can we upgrade 2960 switch from Lanbase IOS to IPbase
View 4 Replies View RelatedCisco :: LMS 3.2 RME Compliance Template
Feb 3, 2013Using LMS 3.2, I've started learning how to use the compliance templates.is there a regex to ignore case? For instance, if I have the line:
clock timezone est -5 in some configs, and
clock timezone EST -5 in others
is there a way to tell the template that upper case and lower case are acceptable matches?
Cisco :: LMS 3.2 Compliance Template Syntax
Nov 2, 2011I want to add the command "no logging event link-status" to all switchport mode access ports EXCEPT for the ones with the following switchport access vlans: 4022,4032,4042,4052,4072 & 4082. How do I create a compliance template to do this? LMS 3.2, RME 4.3.1
View 6 Replies View RelatedCisco :: WCS 7.0 Cannot Edit AP Migration Template
Jun 24, 2010Have upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.
Cisco :: LMS 3.2.1 Compliance Template Range Statement
Jun 5, 2013I am trying to create a very basic template in compliance manager that checks for interfaces that aren't members of specific VLANs. VLAN 10 being one of them. I want to match interfaces assigned to VLAN 20. According to the documentation I have read, the following range statement should work because 10 falls between 3 and 19:
Submode: interface [#.*Ethernet.*#]
- switchport access vlan [#[3-19]#]
With the preceeding statement, however, interfaces assigned to both VLAN 10 and VLAN 20 are matching the rule. With this specific rule (not a range), only interfaces w/VLAN 20 are processed by the template, which is expected. We actually have numerous VLANs that we want to exclude/include. I only mentioned VLANs 10 and 20 for brevity.
Website Template For Photography And Comments?
Nov 26, 2011Me and some friends of mine talking about making a small website for us to share our photos together and be able to add comments under each photo, for example or even better with a simple forum. I have a bit experience making website, but we prefer to use web templates / packages for that also we would be able to add comments( built-in Code, no external links for those codes be needed). We prefer to have our website sure we know there are thousands of free photo-sharing websites out there.
View 2 Replies View RelatedCisco :: Where To Download Router Template On Packet Tracer
Oct 20, 2011Asking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies View RelatedCisco :: PPPoE MTU Restriction Be Applied At Virtual Template
Aug 1, 2012I get that to avoid fragmenting the packets we need to reduce the MTU to 1492, fine, but should the MTU restriction be applied at the virtual-template (server)/dialer (client) or on the physical ethernet interfaces?If I apply it to one or the other, which takes precedence? Should I just apply it to both the virtual/dialer interfaces and the ethernet interfaces?
View 6 Replies View RelatedCisco Wireless :: 5508 NCS WLAN Template Error
Aug 8, 2012I am trying to apply WLAN template from NCS to two WLCs 5508 and I receive this message."Another WLAN with same SSID and either WPA1/ WPA2/ WPA1+WPA2 is enabled. Please change the Layer 2 security policy."The template has layer 2 security with WPA+WPA2 enable and 802.1x.I have other WLAN template with other name and other SSID with the same security policies with no problem to apply.
View 2 Replies View RelatedCisco :: Using Advanced Baseline Template To Push Change LMS 3.2.1
Oct 13, 2011LMS 3.2.1, what is the correct baseline template syntax to accomplish the requirement 2:
Requirement 1
• Check if the router is running H323: You can do it looking for the command “h323-gateway voip interface”. If that command is found on a router then it is an H323 voice gateway
• Configure the global command: voice class h323 1
[Code]...
Sharing :: Adding FTP To A Template Website Or Other Options?
May 3, 2012The business i work for uses a "Do it myself" template for their website. (this is through their webhosting company). I can not add FTP to this website, we have to completely redo it with code and whatnot in order to have access to FTP. We would like users to download a template from our website (no problem) and then send us their artwork files back to us. These can be upwards of 150mb. Is there another option that i am not aware of to do this? Can't use email, has a limit of 25mb.
View 6 Replies View RelatedCisco Switching/Routing :: To Change SDM Template C3750 Stack
Feb 4, 2013According to cisco manual in order to change SDM template i need to reboot switch, but when i have C3750-X stack do i need to reboot stack or maybe will be enough reboot in sequence the stack members?
View 3 Replies View RelatedCisco Wireless :: WCS 7.0172 Template Support For 2504 Controller?
Jun 11, 2013I attempted to assign a User Roles template to a## 2504 controller and if failed with message stating controller version not supported. My current WCS version is 7.0172, if I upgrade to the lastest version will that resolve the template issue?
View 4 Replies View RelatedCisco WAN :: BTU And AMP For ASR 1002
Oct 8, 2011I would like to know the technical Specification regarding the AC power supply for ASR1002.
I need to know the following:
Voltage
Amp
BTU
Watt
BTU and AMP for ASR 1002?
Cisco AAA/Identity/Nac :: ACS 5.1 Import Template Gives File Format Validation Failed
Sep 21, 2011Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.
View 1 Replies View RelatedCisco Wireless :: 5508 - WLC 7.2 - Custom WebAuth Using Waep Template With HTTP Only
Apr 12, 2012We are trying to get the waep template (default no changes) from the Cisco WebAuth bundle to work on a 5508 controller.
We've setup the controller to use the custom login.tar that comes with the waep template folder in the bundle. We setup the WLAN to work off the global template and we used the config network web-auth secureweb disable command to allow only http rather than https (which is supposed to work in 7.2 code)
When we test with the custom bundle, we get no answer from the controller, just a url of [URL]
If we turn custom off, and use internal everything works...
Just to be clear.. we aren't looking for authentication (user and pass) we are trying to do the enter your email and click accept to the aup method.
Cisco WAN :: ASR ASR 1002 Port Not Going Up With 100 Mb?
Jun 28, 2011I have one ASR 1002 router and one GSR router. when i insert SFP-OC48-IR1 module with GSR and connect 100 Mb link that comming from MUX then the GSR port is up but when the link is connect with ASR with same module the port not going up.i had cross check the module GSR to ASR but the problem remain same.
View 1 Replies View RelatedCisco WAN :: ASR 1002-F Bridging
Oct 27, 2012I have Cisco router ASR 1002-F on which I have created two subinterface, Gigabitethernet 0/0/1.333 and Gigabitethernet 0/0/2.111. I try to bridge those two subinterface but no success. I can create bridg-group and everything needed but I can not add subinterface to specific bridge-group. If I try write command bridge-group on subinterface there is not even possible to chose this command.
View 1 Replies View RelatedCisco VPN :: ASR 1002 / ISR 1841 - Get VPN
Mar 6, 2011OK ran into a little problem with getting this to work. Only group members participate in the encryption process, correct?
I have numerous remotes all coming into one central location. I set up a KS and have currently only 2 of the remote routers set up as GM's, with the intention of the others coming into play as I move forward. Here is basically what I have in my KS and GM's:
KS
crypto isakmp policy 10 encr aes authentication pre-share group 2crypto isakmp key testkey address [code].........
GM's
crypto isakmp policy 10 encr aes authentication pre-share group 2 lifetime [code]....
So I applied the crypto map to the serial interfaces on my routers on either side of the cloud (central-ASR1002 and remote-ISR1841). When I did this, ALL the remotes went down and I'm not sure why. Even the ones that didn't have anything to do with gdoi. Ya, it wasn't good. I thought that only the group members would be affected.
Is it the fact that my acl is encrypting any to any? Surely I don't have to reverse that and have two statements with the same syntax. I'm basically just trying to encrypt all traffic from specific remotes back to the central side. However, I'm trying to do it without taking down the rest of my network .
Cisco :: Monitoring ASR 1002 With IOS-XE In IPM 4.2
Oct 26, 2011We are running LMS 3.2 with IPM 4.2 installed....and we are looking to do IPSLA monitoring on a couple of our Cisco ASR's with IOS-XE code installed.
I looked at the IPSLA feature mapping and it only talks about supported IOS code....do we need to upgrade our current IPM module to a current version?