in the configuration>dashboard>configuration i have a portelet Discrepancy but "Por is in Error Disable State" don't uptade automatically i have only one switch indicate it's error disable port the other switch are not reported even if they have a port switch in errr disable.Why?
View 4 Repliesi have been told by my service provider that the 877 adsl router has issues with some of their exchanges and for best compatability i should upgrade to the latest version of firmware.
ADSL firmware of 4.0.18
i have read on the internet that the firmware for the adsl modem is now incoporated within the Cisco IOS. Therefore i will have to upgrade my ios. what i would like to know is what the different release letters mean and can my router run those ios's aslong as it has the required memory.
my current ios is
c870-advipservicesk9-mz.124-24.T5.bin
and im looking to upgrade to
c870-advipservicesk9-mz.150-1.XA5.bin
What is the difference between a T and XA
in one of my LMS3.2.1 installations I find that rtr2900 RME4.3 package are gone/not there I can not find it on regular CCO, nor as a device update, via LMS-CS/Cisco repo doesnt show the package eighter ...(i have patched the CS with cwcs33x-win-CSCto46927-1.zip to get the new CCO access and I can installe other packages)How do I get this installed ?
View 1 Replies View Relatedlatest IOS version is from 18Nov11 and with little amount of traffic it keeps cpu usage sky-high until it starts losing packets (I've tried performance fine tuning according to cisco webpages and saw little difference)
Downgrading isn't an option as 15.2.1 version doesn't implement everything I need...
After update to LMS 4.2.3 is get always a message to confirm when login:
"Server is capable for performance tuning. Please enable PTT ...."
Even when i setup PTT the message will come again next time i login.The message comes also several times after login.where to disable this message?
I have Cisco ASA 5510 with CSC-SSM-10. ASA anti-virus service can not update the Base and Plus lisense. No Activation Code required for renewal. I go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date.In the module on the Check Status Online has reported the following error when: Base License status could not be checked because of a license server failure. "Please try again later", "Plus License status could not be checked because of a license server failure. Please try again later". UPDATE manual virus database can be seen in the latest available version, can not be upgraded because the service expired.
View 2 Replies View RelatedI just got an ASA 5505 with Cisco Adaptive Security Appliance Software Version 8.0(4) alredy loaded on it. Should I update/upgrade it to the newest IOS release, or is the 8.0(4) good and stable?
View 3 Replies View RelatedI have problem that ASA5505 cannot update the time to the NTP which I set to local host connect with the ASA.Refer to the picture below, the ASA time cannot update to 10:49 from 10:29 accordingly. I already set the NTP address to the local host IP address.It can be seen at the NTP at the ASDM as well as the command line below :ntp server 192.168.50.6 source dmz.
View 4 Replies View RelatedAfter successfully install a device update for Common Services, all devices are reported as unknown.Number of Packages Selected for Install : 2
-For Product(s) : Common Services
-Install Invoked by user : ameconi
-The Package(s) Selected for Install :
When I try to install other updates these fail because MDF is version 1.59.
If we update our ios on WLC do we have to add the certificate for AP's again or we don't need to do that.
View 4 Replies View RelatedI have running a LMS master/slave installation with version 3.2.1 and patch for the cisco download running.Now I get on two of the three servers a NullPointerException if I want to go to the Device Update in CS.This is the output from stderr.log:
Feb 17, 2012 8:58:34 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet action threw exception
java.lang.NullPointerException
at com.cisco.nm.xms.psu.ui.gui.model.ViewProduct.getAllProducts(ViewProduct.java:45)
at com.cisco.nm.xms.psu.ui.gui.model.ProductList.getAllRegProducts(ProductList.java:21)
[code].....
I did the installation the same way on all three servers.
I am needing to udate the firmware that I currently have on a 2811 router it currently has c2800nm-adventerprisek9-mz.123-14.T6.bin. I ahve looked through the download area on Cisco's page but the only thing I could find required 128MB flash and this device only has 64MB.
View 2 Replies View RelatedI tried to update my ACS 5.1 appliance. I applied patch 5.1.0.44.3 and made an big mistake: I booted the server due to the fact that it was not reachable after one hour after appplying the patch. Now the server shows following message, when I try to apply other patches: Can not process requested software update operation since this ACS Instance currently has a software update inprogress.
My question: Is it possible to stop the upfate process and apply the other updates or is it possible to revert this update to go back to the previous patch level. For information: the appliance shows only the patches 5.1.0.44.1 and 5.1.44.0.2 installed.
we are running LMS 3.0.1. When I attempt to update the devices for RME I received the following error messages.
Number of Packages Selected for Install : 82
For Product(s) : Resource Manager Essentials
Install Invoked by user : admin
The Package(s) Selected for Install :
[code]....
Everytime I try to use the Cisco.com device update I receive the error in the attached file.
I'm not sure if this is related to me not configuring the proxy settings since we do not use a proxy server.
I've configured our CCO username and password only. Is there a known issue with using the web GUI to get updates using the cisco.com option?
Our Cisco team does inventory pulls with CNC and i was informed that this uses the hostname field currently the report pulls the IPadress, the discoveries that run on the LMS populates displayname field and puts the IP address in the hostname field. is there anyway to update this via query or process, i have too many devices to manually update this.
View 1 Replies View RelatedI have 10 switches 2960 and would like to uptade its IOS using Cisco Prime LMS 4.1. How can I make that?
View 1 Replies View RelatedI discovered that my LAN port was not found anywhere, even though it was enabled in BIOS. This prompted me to buy a netgear USB wireless adapter which gives me internet access but I'm having several issues now.I am unable to synch my internet time with any server, and therefore cannot use windows update which requires time to be synched for whatever reason.
View 3 Replies View RelatedI'm running into an issue trying to update my NAC from 4.8.3 to 4.9.1. I have also tried to update to 4.9 and got the same error. I keep getting Error: Failed to upload file Content length exceeded (669550974 > 524288000) which indicates to me that the NAC is expecting to see a max file size of 524288000 but the tar.gz that I'm sending is the 669550974. I have not seen anything in the release notes about having to do anything special to get this to upload. Has anyone else run into this issue and got it resolved?
View 6 Replies View RelatedI've been looking and I can really find much info about this, I got a 1841 and 2801 router with ADSL WIC cards and both are synching really low compared to my cheap home router
This leads me to believe I need a firmware update so I got the adsl_alc_20190.bin and loaded it into flash and reloaded my router but its still saying my firmware is using an embedded one.
sh flash:-#- --length-- -----date/time------ path1 1000636 Oct 4 2011 05:59:54 +00:00 adsl_alc_20190.bin
sh dsl interface atm0/1/0ATM0/1/0Alcatel 20166/20174 chipset information ATU-R
[Code].....
I have tried to update the firmware of my srw2016 but after this update my switch wouldn't start again.
It shows this message in my console:
Exit from boot menu. Continue with flow.
Preparing to decompress...
Image in address: 0x0 - Check Sum error!
Please download a new image.
Downloading code using XMODEM.
I have this piece at my home and just realized today that there is a new firmware available on the cisco web page. It has made the device more stable, but the most noticeable improvement is in the UI. Previously it was a linksys for business UI that was pretty much exactly like the consumer products. After the upgrade it is now a Cisco small business UI. I think that this will make the resellers take the products more seriously as a small business piece rather than an upgraded residential product.
View 2 Replies View RelatedI have upgraded to prime LMS 4.2.2 (from 4.0.1) and can not perform system or device upgrade. Using wireshark I can see why. it looks like LMS is trying to go to this old web [URL] to get software. I believe this was fixed years ago in bug CSCto46927.
Can I reapply bug fix CSCto46927 on 4.2.3 or is there another fix?
I just bought the SRP541, and it has the old firmware. I downloaded the new firmware, yet I cannot figure out how to install it.
View 3 Replies View RelatedI want to install cumulative patch 9 for Cisco ACS 5.2.0.26 I found installation guide: [URL] Instructions on how to install the patch ===
1. open CLI console
2. define new repository in which the 5-2-0-26-9.tar.gpg resides
3. issue: 'acs patch install 5-2-0-26-9.tar.gpg repository YOUR_REPOSITORY' We have configured 2 ACS appliances in "Split ACS Deployment" How to install cumulative patch on 2 servers?If I install on primary server, does the patch replicate on secondary?
The Nexus RME Device Package V.2.8 asks for RME 4.3.2 ?I am not able to find an update from 4.3.1 to 4.3.2.
View 1 Replies View RelatedDoes CISCO offer a repair service where they would upgrade the hardware in my WAP4410N to the current version V02? Mine is the original version and has a lot of issues. It won't accept the current firmware version which reportedly solves some of these issues.
View 3 Replies View RelatedI am using DynDNS in lieu of a static ip. My ISP changed my WAN ip last night as expected however the RV180W did not update the WAN ip, and so the router is now offline. Using a secondary internet connection I have logged into DynDNS.com and checked my hosts file and confirmed the ipa has not updated since March. I changed the update period from 360 to 2 so this never happens again, but I need to now change the WAN ipa in the RV180W to match the new one. I remember a screen that shows the current WAN ip address greyed out under the present one, but I dont recll where to go to get to that. I am at a loss as to where I go in the RV180W to change the WAN ip address.
View 1 Replies View RelatedI have a working WAP2000 that won't accept the 2.0.3.4 upgrade file. After selecting the file and pressing the UPDATE button, I receive the following error:
This webpage is not available.The webpage at URL might be temporarily down or it may have moved permanently to a new web address.
We need to update the firmware for a small business router WRVS4400N. Unfortunately, I can't even burn the ISO file to CD after downloading it as instructed. I get the following error message: "The selected disk image file Isn't valid." I'm using a Windows 7 Ultimate computer.
I downloaded the proper firmware update for my version V2.0.1.3 router several times, but each time I get the same message.
The main reason we purchased this router for our business for for the extra layer of protection with ProtectLink. It has been over two years now, and we still have not got our ProtectLink service installed because we are unable to install the service until the firmware is updated.
After doing some research online, we found-out that the ISO file needs to be padded to 2 Kb in order to be valid for burning. The ISO firmware file you provide for this update is not according to my calculations. We have no way of converting the file myself and don't know what to do about this situation.
We are extremely taken-back at the fact that I must submit my issue here on a forum rather than address the issue directly to Cisco Support. We are very disappointed with Cisco support as they appear to want to charge additional money just to get an initial shipped-problem remedied. You would think that the company that essential built the internet infrastructure would be more considerate to their customers. We will never purchase another Cisco product given this level of terrible support.
we have replaced a PSU in an ASA 5585 and after it, when we want to see the new PSU serial number, strangely appears the old one instead of the new one. Do we have to do anything in order to get the inventory updated?
View 4 Replies View RelatedI need to update the software for the switch 2950 we have in our LAN. Its been 6 long years I have not looked at this switch and so now is the time since I have had some issue (ie. Outlook losing connections and once in a while email get send out AGAIN for bazzarre reason)
Anyways, I am looking here for thes software I am abit unsure which software to use via Network Assistant. This is the current status of the switch (Cisco 2950, WS-C2950T-SI, 12.1(22)EA4a - C2950 - I6Q4L2-M ). I want to understand what is the difference between C2950 EI AND SI IOS CRYPTO and web based device manager and C2950 EI AND SI IOS IMAGE AND WEB BASED DEVICE MANAGER and which one should I be using for my switch?
i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
View 2 Replies View Related