Everytime I try to use the Cisco.com device update I receive the error in the attached file.
I'm not sure if this is related to me not configuring the proxy settings since we do not use a proxy server.
I've configured our CCO username and password only. Is there a known issue with using the web GUI to get updates using the cisco.com option?
I have running a LMS master/slave installation with version 3.2.1 and patch for the cisco download running.Now I get on two of the three servers a NullPointerException if I want to go to the Device Update in CS.This is the output from stderr.log:
Feb 17, 2012 8:58:34 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet action threw exception
java.lang.NullPointerException
at com.cisco.nm.xms.psu.ui.gui.model.ViewProduct.getAllProducts(ViewProduct.java:45)
at com.cisco.nm.xms.psu.ui.gui.model.ProductList.getAllRegProducts(ProductList.java:21)
[code].....
I did the installation the same way on all three servers.
we are running LMS 3.0.1. When I attempt to update the devices for RME I received the following error messages.
Number of Packages Selected for Install : 82
For Product(s) : Resource Manager Essentials
Install Invoked by user : admin
The Package(s) Selected for Install :
[code]....
I have upgraded to prime LMS 4.2.2 (from 4.0.1) and can not perform system or device upgrade. Using wireshark I can see why. it looks like LMS is trying to go to this old web [URL] to get software. I believe this was fixed years ago in bug CSCto46927.
Can I reapply bug fix CSCto46927 on 4.2.3 or is there another fix?
i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
View 2 Replies View RelatedI have CiscoWorks LMS3.2 with RME4.3.1 and CS 3.3.0.
When I will update the devices and I go to Common Services - Software Center Device Update and I mark Resource Manager Essential then I receive this window:
Now I choose the Rtr2900 package (same problem for all six packages) and when I will download it, then after define the destination path for the file I see this window:
Then I have tried to download it manually with the following command: PSUCli.bat -p rme -d -dst c:psu_download -all
The six packages that are showed in the picture above were not downloaded.
I assume that there is an error on Cisco side because the size of the six packages is NA.
Or is there another possibility to download the package for the Rtr2900?
we have two ASA5520-AIP40-K8 in our office and we purchase IPS service for one only, can we also update the signature of second device before purchasing additional IPS Services for second unit
View 1 Replies View RelatedI am trying to install the evaluation version of LMS 2.5 in our lab for one of our customer.But when i trying to install i have found the attached LMS2.5.jpg error. The specification of system in which i installed is the following.
Microsoft Windows 2000 withService Pack 4.2 GB RAM.Disk Space: Total:72.4 GB, Free Space:22.0GB, Used Space:50.3GB IIS & terminal serrvices were also disable. Java Run Time JRE latest 1.5 also check with 1.6.
Do let me what and where i am missing some thing due to which i am unable to start installation.
One of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
View 1 Replies View RelatedI am facing a problem while updating the SSL certificates in ACE 4710. Our certificate is expired and we have purchased a new certificate from CA. Moreover the common name of the certificate is also changed.
I tried importing the certificate to the repository and change the SSL proxy likewise to use the new certificate. but still the new certificate with new CN is not recognised by the clients. they can see the old certificate only. I even tried deleting and creating a new ssl proxy service with the new cert and attaching it to policy map.
I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
View 3 Replies View RelatedI am using DIR 615 Hardware Version JX... When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site. I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page. Which doesn't even list Rev Jx as an option.I am having a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]
View 1 Replies View RelatedI have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out. I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short.
Any other ways to get the firmware to update.
I have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:
Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.
I downloaded an update for the 1370 wireless card from the microsoft site and now my wireless network doesn't work. I went to the dell site and got the driver directly from the dell site (R140747.EXE) and it fails after it reached 59% complete. I tried another download recommended from this forum (R151519.EXE) and the same error at 59%. I have tried everything I have seen in the forums (closing virus software, editting setup ini file, etc) and I still get Update 778 error at 59%. I am running on an Inspirion 6000, CARD (CIRCUIT), IRELESS, MINI PCI CARD, 1370, BROADCOM CORPORATION, Dlink wireless router, windows xp with sp2, USA. I have also received an error that says something about internal setting incompatible (unfortunately I didn't capture the exact wording - I will attempt to recreate the error) This is terribly frustrating considering I was only following the dell suggestion that I update the driver and now that I attempted it, my laptop is sitting not being used.
View 5 Replies View RelatedDevice performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
View 2 Replies View RelatedI'm trying to configure ACS 5.1 as radius server for a catalyst switch but i can't make it work.I keep on getting the "11033 Selected Service type is not Network Access" error message.
Tacacs works fine but radius does not. Any sample device administration config to use with RADIUS?it seem the service type does not work with radius in this scenario ( radius + device admin).
I am trying to move a device from the Default location to a sub group and get the following message when I try (either with IE or Firefox)
This System Failure occurred: Index : 0, Size: 0. Your changes have not been saved. Click OK to return to the list page.
it also gives me the same error if I try and change the Device type from default to a sub group. I'm sure I could do this previously. The ACS build is (VMWARE install):
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.228ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: ACS1
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40Internal Build ID : B.839
I'm suspecting it a read/write issue with the database or a database corruption. I have stopped and started the application acs via the console and show application status acs has the following to say about itself.
ACS1/admin# show application status acs
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'view-database' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' runningProcess 'view-collector' runningProcess 'view-logprocessor' running
I've just installed ACS 5.1 and noticed that it seems to count managed devices differently than previous versions.
I have a 500 count license which should be fine as I have about 100 devices which will use ACS for TACACS. On ACS 3.x and 4.x, I would set up AAA clients by using a wild card for the subnets that host our routers/switches, say 192.168.1.0/24, 172.16.1.0/24 and 10.1.1.0/24. when I do this with ACS 5, I get a Managed Device Count Exceeded error messasge becasue of the potential of more than 500 AAA clients. It seems to be counting every IP address in the subnet as a managed device, even if there are only a handful actually in use. Is there a way around this short of having to manually enter (and maintain) the exact IP Address of every managed switch and rotuer which will use the ACS server for TACACS?
So I was having trouble loading a game on my computer and I was scrolling through forums looking for an answer and one answer that supposively worked for a lot of people was to unisntall and reinstall my network card.IT told me to go to devices -> right click network adapter -> uninstall -> then scan for hardwarer changes to reinstall When I clicked uninstall an error message popped up and said "Unable to uninstall device because device is required on startup" and then it apparently just uninstalled it anyway and it showed back up after I clicked "scan for hardware changes".Now ever since, everytime I try and connect to the internet my computer says "Limited or no connectivity" and I'm unable to access the internet on that computer, the computer I am on now can connect just fine, so it must have something to do with the network card that i supposively unisntalled.
View 17 Replies View RelatedWhen trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.
Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.
-When I'm logged on to the GUI, the above message is displayed in the status bar always.
-It was not recovered by ACE restart it.
-When I try to create the same configuration in a different environment, it did not reproduce.
NEXUS 7000 Octopus internal error in device 78 message. I got this on NEXUS 7000 logs:
Nov 12 22:05:14 smale-outside : 2012 Nov 12 21:05:14 BRST: %MODULE-2-MOD_DIAG_FAIL: Module 2 (serial: JAF1548AMKB) reported failure on ports 2/1-2/32 (Ethernet) due to Octopus internal error in device 78 (device error 0xc4e0025b)
Nov 12 22:05:17 smale-outside : 2012 Nov 12 21:05:17 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
Nov 12 22:05:18 smale-outside : 2012 Nov 12 21:05:18 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
[code]....
I only have found:
[URL]
which does not match reality : No one was configuring Vlans.
We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following:
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[code]....
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
View 3 Replies View RelatedMy BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
View 1 Replies View RelatedThe router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
The problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?
View 1 Replies View RelatedI'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies View Relatedi'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies View Relatedi have been told by my service provider that the 877 adsl router has issues with some of their exchanges and for best compatability i should upgrade to the latest version of firmware.
ADSL firmware of 4.0.18
i have read on the internet that the firmware for the adsl modem is now incoporated within the Cisco IOS. Therefore i will have to upgrade my ios. what i would like to know is what the different release letters mean and can my router run those ios's aslong as it has the required memory.
my current ios is
c870-advipservicesk9-mz.124-24.T5.bin
and im looking to upgrade to
c870-advipservicesk9-mz.150-1.XA5.bin
What is the difference between a T and XA
in one of my LMS3.2.1 installations I find that rtr2900 RME4.3 package are gone/not there I can not find it on regular CCO, nor as a device update, via LMS-CS/Cisco repo doesnt show the package eighter ...(i have patched the CS with cwcs33x-win-CSCto46927-1.zip to get the new CCO access and I can installe other packages)How do I get this installed ?
View 1 Replies View Relatedlatest IOS version is from 18Nov11 and with little amount of traffic it keeps cpu usage sky-high until it starts losing packets (I've tried performance fine tuning according to cisco webpages and saw little difference)
Downgrading isn't an option as 15.2.1 version doesn't implement everything I need...
in the configuration>dashboard>configuration i have a portelet Discrepancy but "Por is in Error Disable State" don't uptade automatically i have only one switch indicate it's error disable port the other switch are not reported even if they have a port switch in errr disable.Why?
View 4 Replies View Related
