Cisco :: LMS 2.5 2005 Update Installation Error
Sep 21, 2011
I am trying to install the evaluation version of LMS 2.5 in our lab for one of our customer.But when i trying to install i have found the attached LMS2.5.jpg error. The specification of system in which i installed is the following.
Microsoft Windows 2000 withService Pack 4.2 GB RAM.Disk Space: Total:72.4 GB, Free Space:22.0GB, Used Space:50.3GB IIS & terminal serrvices were also disable. Java Run Time JRE latest 1.5 also check with 1.6.
Do let me what and where i am missing some thing due to which i am unable to start installation.
View 3 Replies
ADVERTISEMENT
Mar 10, 2013
i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
View 2 Replies
View Related
Apr 2, 2013
I just got two Prime NCS Servers for my system and they came with 1.2. My management wanted to run the lastest IOS which is 1.3. So as soon as I set the physical equipment up, I downloaded the latest 1.3 IOS for the site and burned it on a DL DVD and reimaged the appliance.
View 1 Replies
View Related
Jun 12, 2012
We are getting the below mentioned error while installling Cisco Prime LMS 4.2.1 evaluation version on WIndows 2008 Enterprise R2.We tried installing on a high end VMware server .Prerequisites are all taken care by us.We are getting a LMS installation abort log saying that Swap space is not configured properly even after increasing the Paging size to 32 GB.Our physicalmemory is 16 GB.Hard drive has 2 partitions,one is 35 GB and other is 200 GB.
View 3 Replies
View Related
Jan 28, 2013
I am installing LMS 4.2 on Windows 2008 R2 standard edition 64 bit. During installation its showing the following error.And I am not able to proceed the installation.
View 1 Replies
View Related
Jan 3, 2012
We have a Cisco Works LMS 3.2 (solaris) and installing service pack 1 we get an error during installation process:[code] We attach instalation log. We think the problem can be related to bug CSCtn45425.
View 1 Replies
View Related
May 9, 2013
Some of my VPN users are getting the following error on Windows 7 64 bit computer. I have uploaded the client to a website. The VPN users are supposed to download and install the client from the web-site. Then they enter the URL to connect to our VPN. This worked fine during the test and only some users are having issues. This seems like Windows issue.
Error “There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personal or package vendor”
Client- anyconnect-win-3.1.02026-web-deploy-k9.exe
View 1 Replies
View Related
Nov 15, 2011
I'm installing a new platform LMS 4.0.1 under VMWare and Windows 2008 R2.
I installed via Windows 2008 R2 Patch without problem in LMS 4.0, then updated in LMS 4.0.1.
I'm facing several issues during this installation.
The first issue I have is the following:
When I launched topology services, java jre file jre-6u22-windows-i586-p_withjacorb.exe was downloaded and I saved it on disk.
I clicked on file to install it and get the following message during the installation:
Error 1330.A file that is required cannot be installed because the cabinet file C:UserslmsAppDataLocalLowSunJavajre1.6.0_22Data1.cab has an invalid digital signature. This may indicate that the cabinet file is corrupt.
It tried to install certificate without success. I have internet access to java.com but it seems publisher is not trusted.
View 3 Replies
View Related
Dec 26, 2012
After a successfull installation of NCS 1.2 into a vmware environment and run the setup I have the following error while trying to start or to have a status for NCS (ncs start ot ncs status):sh: /opt/CSCOlumos/bin/wcsadmin.sh No such file or directory
View 10 Replies
View Related
Oct 3, 2011
I have a dell Win XP need to connect to Belkin router
View 1 Replies
View Related
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
Aug 17, 2011
I am installing the router but keep getting stuck on the 4th step and getting an error code 321. i currently have cable internet, which is working but when i follow the instructions it wont work. I cant access 192.168.1.1. I tried through google chrome and internet explorer but neither will recognize it. I just started school and would like to use wireless internet on my new laptop instead of cable on my desktop.
View 9 Replies
View Related
Feb 25, 2013
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies
View Related
Mar 6, 2013
Everytime I try to use the Cisco.com device update I receive the error in the attached file.
I'm not sure if this is related to me not configuring the proxy settings since we do not use a proxy server.
I've configured our CCO username and password only. Is there a known issue with using the web GUI to get updates using the cisco.com option?
View 4 Replies
View Related
Jun 17, 2012
One of our customers wants to update the firmware of a 5508 wlc, but always gets the following error message: Error Message %UPDATE-3-INV_FILE_SIGN: Error! Invalid image signature!. Image may be corrupt.but the same image works fine on another 5508. The update was downloaded via a smartnet for the wlc, on which the update works fine. does the customer has to download another image for the second controller, or should the image work on both wlc?
View 1 Replies
View Related
May 17, 2012
I am facing a problem while updating the SSL certificates in ACE 4710. Our certificate is expired and we have purchased a new certificate from CA. Moreover the common name of the certificate is also changed.
I tried importing the certificate to the repository and change the SSL proxy likewise to use the new certificate. but still the new certificate with new CN is not recognised by the clients. they can see the old certificate only. I even tried deleting and creating a new ssl proxy service with the new cert and attaching it to policy map.
View 2 Replies
View Related
Sep 2, 2012
I get this error when I update to 1.12. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
View 3 Replies
View Related
Feb 15, 2013
I am using DIR 615 Hardware Version JX... When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site. I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page. Which doesn't even list Rev Jx as an option.I am having a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]
View 1 Replies
View Related
Aug 26, 2010
I have been trying to update my boradcom 5709c firware, or more acurrately trying to install the Broadcom Network Device firmware, family version 5.2.7 from the drivers page for my PowerEdge T110 running Server 2008 R2 Enterprise x64. Once the package extract and starts running, I am getting an error that simply says "BMAPI Error", and the program bails out. I really need to update this firmware, and have been looking for manual steps and other ways to get it done and have come up short.
Any other ways to get the firmware to update.
View 5 Replies
View Related
Jan 19, 2012
I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies
View Related
Sep 20, 2011
I have an WRT54G2, and I recently bought an new notebook and a new mobile phone. The question is none can connect to my wireless network.My linksys had the following configuration:
Firmware 1.0.03
SSID hidden
WPA2 personal + AES
My note is an ACER 5552-5664 running Ubuntu 11.04 and Windows 7, in Ubuntu I can’t use the wireless. In Windows it works fine.The phone is a Samsung Galaxy and do no connect in the wireless.I had an old notebook running only Windows 7 that works fine too.In my father’s home there is an WRT54G and all my equipment connected there. Other problem is that when I tried to update the firmware, it simple don’t update. I’ve downloaded the last firmware file from Cisco’s page.
View 3 Replies
View Related
Jun 9, 2007
I downloaded an update for the 1370 wireless card from the microsoft site and now my wireless network doesn't work. I went to the dell site and got the driver directly from the dell site (R140747.EXE) and it fails after it reached 59% complete. I tried another download recommended from this forum (R151519.EXE) and the same error at 59%. I have tried everything I have seen in the forums (closing virus software, editting setup ini file, etc) and I still get Update 778 error at 59%. I am running on an Inspirion 6000, CARD (CIRCUIT), IRELESS, MINI PCI CARD, 1370, BROADCOM CORPORATION, Dlink wireless router, windows xp with sp2, USA. I have also received an error that says something about internal setting incompatible (unfortunately I didn't capture the exact wording - I will attempt to recreate the error) This is terribly frustrating considering I was only following the dell suggestion that I update the driver and now that I attempted it, my laptop is sitting not being used.
View 5 Replies
View Related
Mar 12, 2013
The router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
View 5 Replies
View Related
May 1, 2012
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
View 8 Replies
View Related
Apr 20, 2011
i'm currently studying at a college which has a website with a student intranet that is available to log in from any computer. So far it has been working well and I can log in on my home laptop and upload documents and look at presentations etc. Today for no reason when I try and log in I get the message Error Code 500: Internal Server Error and the webpage does no appear.I have had no problems previously and this has only happened today and yesterday, I went down to the college and accessed the website fine from the computers in the library but still no joy from my home computer.
View 1 Replies
View Related
Oct 17, 2011
I'm trying to install LMS 4.0 on a 2008 R2, I got a message saying that this is not supported. Going through Cisco documentation I read the following:
Caution If you want to upgrade the operating system from Windows 2003 or Windows 2008 to Windows 2008 R2, you must first complete upgrading the operating system, and then install the LMS 4.0.x Windows 2008 R2 patch.
I'm a bit confused because i'm not upgrading the operating system, this is a fresh install.
I tried to run this in compatibility mode, selected 2008, and running it as an Admin, this time I'm getting a Locale error stating that this is only supported in US English or Japanese. I've changed the system locale to US English, still getting the same error.
View 18 Replies
View Related
Dec 6, 2011
I have router cisco 2821 wit IOS version 12.4(25d) I also have Cisco AIM-VPN/SSL-2 Encryption Module for this router.I inserted this module in AIM slot 0 but can not see it. [code] What should I have to change to enable this module?
View 2 Replies
View Related
Apr 16, 2012
We've just purchased the a VM Version of MSE (L-MSE-C3-W25) installed on vSphere.Have followed the guide, gone to add this to WSE and it wont connect.Looking at the console it says to type /init.d/msed.start, I get -bash: /init.d/msed: No such file or directory Then type getserverinfo returns Health Monitor is not running.
View 2 Replies
View Related
Jul 2, 2012
How can I do a VoIP Install/Repair?
View 3 Replies
View Related
Oct 19, 2011
Which are the cable use during network setup .thr saterlite procedure in transmitting information.The speed of transmission in information.
View 2 Replies
View Related
Sep 1, 2011
Any info concerning the installation of CW LMS 4.0.1 on Solaris 10!
The installation keeps on failing when it is checking for packages. Also the second time when we downloaded the software once more.
ERROR: AddProperty called with invalid package name: CSCOmd.
I have also attached the install log files.
The system is Solaris 10 with zones:
bash-3.00# more /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
121133-02, 125503-02, 126897-02, 127127-11, 127755-01, 138866-01 Incompatibles:
[Code] .....
View 5 Replies
View Related
Mar 14, 2012
I have one WLC AIR-WLC4402-50-K9 which is hitting some bug. So I done RMA for that devices and now i got the new WLC.Now i want to install that RMA WLC in network. So can any one tell me what is the process for installtion of WLC. I already have the old WLC in working now. Which file backup i need to take from old WLC.
View 3 Replies
View Related
Jan 21, 2013
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies
View Related
