Cisco :: Rtr2900 - LMS 3.2 Device Update Didn't Works
Aug 24, 2011
I have CiscoWorks LMS3.2 with RME4.3.1 and CS 3.3.0.
When I will update the devices and I go to Common Services - Software Center Device Update and I mark Resource Manager Essential then I receive this window:
Now I choose the Rtr2900 package (same problem for all six packages) and when I will download it, then after define the destination path for the file I see this window:
Then I have tried to download it manually with the following command: PSUCli.bat -p rme -d -dst c:psu_download -all
The six packages that are showed in the picture above were not downloaded.
I assume that there is an error on Cisco side because the size of the six packages is NA.
Or is there another possibility to download the package for the Rtr2900?
in one of my LMS3.2.1 installations I find that rtr2900 RME4.3 package are gone/not there I can not find it on regular CCO, nor as a device update, via LMS-CS/Cisco repo doesnt show the package eighter ...(i have patched the CS with cwcs33x-win-CSCto46927-1.zip to get the new CCO access and I can installe other packages)How do I get this installed ?
I just bought the WAG120N , firmware version is v1.00.12, but it seems it has a problem with the device here.I have to turn off the system / device every time i want to get my dynamic ip update into dyndnds.org , it cant auto update the new dynamic ip.What problem that cause somethin like this?I already upgrade the firmware into 1.00.16 , but it didn't solve the problem.
I installed windows 8 X64 on dell inspiron 5220 and it didn't recognized the wireless device .It also rejects its win7 driver due to known comparability issue. Where can I find the driver?
I´m getting started on ciscoworks and i trying to configure a device discovery to start but i have some questions about how configure this tool exist 5 parameters that i have to configure to start the device discovery.
I want to add devices that found neighbors via CDP son in the configuring discovery module setting i choice that option In the configuring seed device setting i choose DCR as seed device that means those devices already in the DCR start discovering from those devices but you can add more seed devices how i can add a seed device ? with ip addres or something like this? and this device have to be in the DCR already or not? The configuring SNMP settings, this community correspond to what device? the devices that i want to add ? and in the field target name what ip adders have to be? and if i have different community of snmp in my devices what device and snmp community have to configure in this parameter
I have running a LMS master/slave installation with version 3.2.1 and patch for the cisco download running.Now I get on two of the three servers a NullPointerException if I want to go to the Device Update in CS.This is the output from stderr.log:
Feb 17, 2012 8:58:34 AM org.apache.catalina.core.StandardWrapperValve invoke SEVERE: Servlet.service() for servlet action threw exception java.lang.NullPointerException at com.cisco.nm.xms.psu.ui.gui.model.ViewProduct.getAllProducts(ViewProduct.java:45) at com.cisco.nm.xms.psu.ui.gui.model.ProductList.getAllRegProducts(ProductList.java:21)
[code].....
I did the installation the same way on all three servers.
how the CDP device sensor probe works with ISE ?What I am trying to do, is to identify different Cisco Wireless Access Point models (i.e. LAP 1142) with ISE.Since the APs do speak CDP (I can see the AP devices on the switch), this should be possible with the CDP device sensor on the switch, shouldn't it I have done the following so far: Configured the switch to talk to ISE via radius accounting: [code] Should this config make the switch send CDP information about connected devices to the ISE (via radius accounting) ?How do the device sensors work ?
I have upgraded to prime LMS 4.2.2 (from 4.0.1) and can not perform system or device upgrade. Using wireshark I can see why. it looks like LMS is trying to go to this old web [URL] to get software. I believe this was fixed years ago in bug CSCto46927.
Can I reapply bug fix CSCto46927 on 4.2.3 or is there another fix?
i used the software center to download latest device packages, all downloaded to PSU_Downloads folder , i want to know how to install them with GUI if possible , as i tried to use CLI but it seems that i'm using bad syntax.
Any cheap outdoor extension antenna that works with a Linksys wap54g? Not looking for anything too expensive. Just trying to bring wifi signal into a building.
we have two ASA5520-AIP40-K8 in our office and we purchase IPS service for one only, can we also update the signature of second device before purchasing additional IPS Services for second unit
I have a 512MB USB Flash device and was able to boot the IOS on the C2960 from it.After that i tried to Copy the IOS file from the USB to the system flash, but it could not find the USB Device.At plugging in the device the systems tells me: "Transfer type 2 not supported" I configured the USB device in NTFS and FAT both are able to boot with the ROMMON, but the normal system does not accept them and i know i can do the copy over a TFTP from my laptop, but it is strange that rommon accepts the usb device and the system does not?
I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.
Problem Host A unable to reach Host B, trace route from Host A it reach to Router B but the packet unable reach to the Host B here the 1st level troubleshoot I did
1. Traceroute and ping success from router A to host B
2. Ping success from router B to host B success
I wonder the packet reach to router B but it didnt pass to Host B.
I have cisco sr520 adsl router i have everything set up and it is ok. Internet work but i can not open some web pages In DNS is not problem NAT work fine. When i try some simple adsl gateway the problem websites work correctly. I think the problem is on sr520 router.
I am switching out routers. I have some ports forwarded that I know I need to copy down so I can open them up on the new one, but besides that, what else do I need to do/know before replacing the old for the new?Currently, we have a TRENDnet TEW-431BRP. We are replacing it with a Netgear WNR1000.Is the new one good? I didn't set up our home network. Someone from my dads previous business and friend did it for us. So I don't know what exactly was done in the router settings to set everything up.
I figured just copy the ports that needed to be opened in the new router and maybe use the same WEP password for wireless stuff. I need to take note of with this working outer so I can apply it to the new router while I still have a working network with all its setting to refer to before I take the network down.
I recenly installed LMS 4 on a windows 2008 R2 system , I didnt change the default configuration of windows or ciscoworks.I just added devices and configured basic things on the LMS system .when I open ciscoworks on the server itself it starts a browser session on http port 1741 and then changes automatically to https even though the default config is browser security disabled on ciscoworks.I try to open a browser session on a mgmt station to the cisco server , it didnt work in https ( I did get the login screen but couldnt log on , probablly something to do with the certificate ) , so I open http on port 1741 and it worked , I was able to log in .After a few Hours for some strange reason I didnt have access any more from the mgmt station not in http nor in https , the only way was to access it from the server itself.I went and changed the default setting of the secure browser on LMS 4 hopping that would work , I was asked to restart the ciscoworks service for the changes to take affect , I tried to restart it but it was unsuccesful so I restart the whole server. when it came up ciscoworks didnt work most services didnt start ( like the web server ,tomcat and all the manual services and ciscoworks deamon)
I am facing two issues in BGP both the topology and Config files.Because the link between Vail and Telluride runs iBGP, both routers will learn about the networks in AS 300 and AS 400 through native BGP only and both AS's do reach each other. Both routers are also running OSPF with Aspen and BGP routes are redistributed into OSPF domain. Now, Aspen knows about the networks in AS 300 and AS 400. Now suppose the link between Vail and Telluride fails, both AS 300 and AS 400 can't reach each other anymore. The only solution to this is to redistribute OSPF routes to BGP on Vail and Telluride. But when i did this, only routes with "O" learned by Tahoe and Alta. In other words, Tahoe sees only 192.168.1.220, 192.168.1.196 and Alta sees only the same routes. Why the redistribution from OSPF to BGP didn't advertise the O E2 routes?
This actually was discussed before but i still can't get it. It is not an actual issue.It is about "Syncronization". I know that we've said many times to turn on Sync. when we do redistribution from BGP to an IGP to make sure that the routes are installed correctly in the IGP routing table. However, as you notice in the configuration, i didn't enable Sync. on Vail and Telluride for a long time and redistribution still works fine.
From one day to the next our UPM database (upm.db) has blown up from 4 Gb to 35 Gb.Data purging didn't reduce the size of the db.What happened ? And how can I compact the db again ?
I upgraded my fireware and now the router don't do anything, I can't even login into it using [URL] which a hard wired connection. How do I get logged into the router to try and put the old version of firmware back on it?
My SRP526W (running the actual firmware 1.01.27) didn't recognize my new Huawei E372 USB dongle (it's a T-Mobile web'n'walk Stick Business II, already installed the newest firmware 11.203.03.10.55).Using a Huawei E172 or a Huawei E353, both USB dongles works well. But they are slow compared to the E372. I'd really like to use the E372 stick because it's super fast with up to 42Mbps download speed.As I could read in the release notes of the SRP526W, the Huawei E372 should be supported since firmware version 1.01.26.Inside the Huawei E372 you can find the printing "Model: E372u-5", maybe this is a different model which is currently not supported by the SRP526W.
I've a customer who has netManager 1.0 and they want to upgrade to CUOM 8.6. I didn't find any upgrade document for netManager 1.0 upgrade to CUOM 8.6.
I was in the process of creating a AAA setup on my NX-0S (MDS9148), logged out/attempted to login to test AAA login and now I can no longer login as admin either! I didn't change the local account. I have the Cisco Device Manager open still (in the fabric switch) and how I remedy this (AAA is not up and running as of yet with this switch).
I want to make a question about RV042. I used RV042 router in my office. I used content filter feature in router.Althought this have not been apply the rules. I think I made wrong rules.I enabled the block enable forbbiden domain .And then added the websites that I want block.However, these websites are still browsing in local computer.
i bought a Linksys E2000 router. When i went to set it up, i noticed that the old router has a phone line connected to it. When i looked at my E2000, I noticed that it didn't have a phone port in it (Rj11). Not sure what to do. Would it be possible to buy a Rj11 to Rj45 converter and just use that to connect the phone line to my router?
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
my sister gave me an old ethernet switch so I could use the internet on my computer and my PS3. Unfortunately I didn't get any type of setup manual so I downloaded one off the manufacturer's website
I've setted the unit in BRIDGE MODE, and attached on it 3 LAN devices, 1 PC Desktop, 1 NAS WDBE and 1 HP printer ... OK all config process was right and all my units talk togheter via AP Netgear DNG2000, and so i can use for instance the printer with my laptop too connected in WI-FI N. Now usually, In the night I turn off all my devices (DAP included), and when in the morning I need only the printer used by my laptop, obviously I turn on ROUTER - BRIDGE - PRINTER - LAPTOP but NOT the DESKTOP ... and so the DAP can't reconnect automatically to the router (both the lights AP/BRIDGE are on and fixed) ... I turn on the PC and the BRIDGE reconnect to the world .... BUT I DON'T WANT turn on everytime the desktop !
1) all gears has fixed IPs
2) DHCP server deactivated on the AP main router (DNG2000)
3) no WPS used, only WPA2-PSK (AES) personal keys on all gears
once that DAP-1522 is connected to the router .... all work fine (also when I turn off the DESKTOP).so the workaround is never turn-off the DAP ? I can't believe ... and who will save the energy planet
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
