Cisco Routers :: SRP526W Didn't Work With A Huawei E372
Aug 17, 2012
My SRP526W (running the actual firmware 1.01.27) didn't recognize my new Huawei E372 USB dongle (it's a T-Mobile web'n'walk Stick Business II, already installed the newest firmware 11.203.03.10.55).Using a Huawei E172 or a Huawei E353, both USB dongles works well. But they are slow compared to the E372. I'd really like to use the E372 stick because it's super fast with up to 42Mbps download speed.As I could read in the release notes of the SRP526W, the Huawei E372 should be supported since firmware version 1.01.26.Inside the Huawei E372 you can find the printing "Model: E372u-5", maybe this is a different model which is currently not supported by the SRP526W.
View 0 Replies
ADVERTISEMENT
Feb 19, 2013
Region : Italy
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
Italy just got the LTE, and these two devices (Huawei E372 and HUAWEI E392) are in the price list of the operator (TIM). Are these compatible with the router (TL-MR3420) here in Italy?
View 2 Replies
View Related
Jul 25, 2012
I want to make a question about RV042. I used RV042 router in my office. I used content filter feature in router.Althought this have not been apply the rules. I think I made wrong rules.I enabled the block enable forbbiden domain .And then added the websites that I want block.However, these websites are still browsing in local computer.
View 4 Replies
View Related
Nov 15, 2012
i have a SRP526W and it won't boot correct, nothing is changed, I just turned it off and changed the place, now it won't boot. The POWER/SYS LED flashes and DSL Data LED is solid green!!
View 1 Replies
View Related
Nov 10, 2011
We are having a SRP526W here which replaced a cheap, simple router. Now we would like to set up the VPN-access for outside clients again. So far this was done by forwarding PPTP (TCP 1723 and GRE) to the Windows 2000 Routing and RAS-server inside the network.According to this post the SRP521W, and therefore I suppose as well the SRP526W, are not able to forward GRE: [URL]
Is there a way to provide VPN access for outside clients with this router? Maybe with L2TP (but then we would need to forward ESP) or IPSec (ESP and AH as far as I know)?
If there is no solution we would need to replace this device again with a cheap, simple router which is able to forward GRE - as you can imagine, we would like to save Cisco from this shame.
View 3 Replies
View Related
Jan 12, 2012
I have cisco sr520 adsl router i have everything set up and it is ok. Internet work but i can not open some web pages In DNS is not problem NAT work fine. When i try some simple adsl gateway the problem websites work correctly. I think the problem is on sr520 router.
View 5 Replies
View Related
May 7, 2011
I upgraded my fireware and now the router don't do anything, I can't even login into it using [URL] which a hard wired connection. How do I get logged into the router to try and put the old version of firmware back on it?
View 4 Replies
View Related
Mar 29, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Cellcom 3g - Israel
My USB Modem HUAWEI E173 not work as well with TL-MR3420 Its lose Identify every almost 15 minutes , and try to Identify again and some times not successfully until I reboot the unit . then its Identify successfully , after some minutes the problem happen again and again . I think its from the router software issue that it have not the correct driver of the modem .
also , the signal of the wireless not that good like the other routers which I used before .
View 8 Replies
View Related
Feb 1, 2013
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?
View 1 Replies
View Related
Sep 21, 2012
I restarted my pix firewall cisco pix 515 and when i start it again the Act lamp and the firewall didn't work .
View 1 Replies
View Related
Jan 16, 2013
I'm trying to setup a Huawei E398 from Swiscom (switzerland operator) and my CISCO RV215W cannot detect him. Is the RV215W compatible with the Huawei E398 USB LTE Modem?
View 2 Replies
View Related
Feb 3, 2013
I need support with the RV215W. It won't recognize a Huawei E398 LTE-Stick (Germany: Telekom Speedstick LTE). According to [URL] the RV215W should support the Speedstick LTE.
Router Firmware: 1.0.1.1 (newest) E398 Firmware: 11.433.61.10.55 (newest from Telekom)
View 1 Replies
View Related
Jul 15, 2011
is the SRP541W compatible with the Huawei E398 USB LTE Modem? If not, will it be compatible in the near future?
View 4 Replies
View Related
Apr 20, 2012
I currently own 2 wifi routers which have 4 lan ports on the back. In my room i have two desktops without wireless capability. I was wondering is it possible to have one router in my room which my desktops plug into - and then the router to ""Bridge" with the one downstairs to give me wireless capability. I believe its called bridging but i have had no hopen as of yet. Huawei HG520b and Huawei HG532 are my two routers. I know this can be done by purchasing a wire - but i cannot afford a 100m cable and i am not particularly interested in purchasing an adapter for my desktops.
View 6 Replies
View Related
Mar 10, 2013
I tried to bridge two wireless routers wirelessly, but after extensive research I came to the conclusion that this wasn't possible.
Now I am trying to connect these two routers through a cat5 cross-over cable and I wanted to know whether can I disable DHCP on the router which has internet, and enable the DHCP of the router which is connected to the printers, because I have a few systems that shouldn't be connected to the internet.
What I had in mind is if I switch the DHCP OFF on the internet router and turn it ON on the Huawei B683 router, I could add those devices' MAC addresses to the internet gateway router to deny them access to the internet..?
View 2 Replies
View Related
Jan 17, 2013
I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera
View 10 Replies
View Related
Jan 26, 2011
I Echolife 520b, can not enable wireless network in the menu Basic Wireless LAN option is missing
View 1 Replies
View Related
May 28, 2011
I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.
View 6 Replies
View Related
May 12, 2011
Problem Host A unable to reach Host B, trace route from Host A it reach to Router B but the packet unable reach to the Host B here the 1st level troubleshoot I did
1. Traceroute and ping success from router A to host B
2. Ping success from router B to host B success
I wonder the packet reach to router B but it didnt pass to Host B.
View 5 Replies
View Related
Feb 7, 2011
I am switching out routers. I have some ports forwarded that I know I need to copy down so I can open them up on the new one, but besides that, what else do I need to do/know before replacing the old for the new?Currently, we have a TRENDnet TEW-431BRP. We are replacing it with a Netgear WNR1000.Is the new one good? I didn't set up our home network. Someone from my dads previous business and friend did it for us. So I don't know what exactly was done in the router settings to set everything up.
I figured just copy the ports that needed to be opened in the new router and maybe use the same WEP password for wireless stuff. I need to take note of with this working outer so I can apply it to the new router while I still have a working network with all its setting to refer to before I take the network down.
View 6 Replies
View Related
Aug 18, 2011
I recenly installed LMS 4 on a windows 2008 R2 system , I didnt change the default configuration of windows or ciscoworks.I just added devices and configured basic things on the LMS system .when I open ciscoworks on the server itself it starts a browser session on http port 1741 and then changes automatically to https even though the default config is browser security disabled on ciscoworks.I try to open a browser session on a mgmt station to the cisco server , it didnt work in https ( I did get the login screen but couldnt log on , probablly something to do with the certificate ) , so I open http on port 1741 and it worked , I was able to log in .After a few Hours for some strange reason I didnt have access any more from the mgmt station not in http nor in https , the only way was to access it from the server itself.I went and changed the default setting of the secure browser on LMS 4 hopping that would work , I was asked to restart the ciscoworks service for the changes to take affect , I tried to restart it but it was unsuccesful so I restart the whole server. when it came up ciscoworks didnt work most services didnt start ( like the web server ,tomcat and all the manual services and ciscoworks deamon)
View 1 Replies
View Related
Jan 9, 2012
I am facing two issues in BGP both the topology and Config files.Because the link between Vail and Telluride runs iBGP, both routers will learn about the networks in AS 300 and AS 400 through native BGP only and both AS's do reach each other. Both routers are also running OSPF with Aspen and BGP routes are redistributed into OSPF domain. Now, Aspen knows about the networks in AS 300 and AS 400. Now suppose the link between Vail and Telluride fails, both AS 300 and AS 400 can't reach each other anymore. The only solution to this is to redistribute OSPF routes to BGP on Vail and Telluride. But when i did this, only routes with "O" learned by Tahoe and Alta. In other words, Tahoe sees only 192.168.1.220, 192.168.1.196 and Alta sees only the same routes. Why the redistribution from OSPF to BGP didn't advertise the O E2 routes?
This actually was discussed before but i still can't get it. It is not an actual issue.It is about "Syncronization". I know that we've said many times to turn on Sync. when we do redistribution from BGP to an IGP to make sure that the routes are installed correctly in the IGP routing table. However, as you notice in the configuration, i didn't enable Sync. on Vail and Telluride for a long time and redistribution still works fine.
View 2 Replies
View Related
Aug 24, 2011
I have CiscoWorks LMS3.2 with RME4.3.1 and CS 3.3.0.
When I will update the devices and I go to Common Services - Software Center Device Update and I mark Resource Manager Essential then I receive this window:
Now I choose the Rtr2900 package (same problem for all six packages) and when I will download it, then after define the destination path for the file I see this window:
Then I have tried to download it manually with the following command: PSUCli.bat -p rme -d -dst c:psu_download -all
The six packages that are showed in the picture above were not downloaded.
I assume that there is an error on Cisco side because the size of the six packages is NA.
Or is there another possibility to download the package for the Rtr2900?
View 13 Replies
View Related
Nov 15, 2011
From one day to the next our UPM database (upm.db) has blown up from 4 Gb to 35 Gb.Data purging didn't reduce the size of the db.What happened ? And how can I compact the db again ?
View 4 Replies
View Related
Jan 22, 2012
I've a customer who has netManager 1.0 and they want to upgrade to CUOM 8.6. I didn't find any upgrade document for netManager 1.0 upgrade to CUOM 8.6.
View 0 Replies
View Related
Apr 21, 2011
I was in the process of creating a AAA setup on my NX-0S (MDS9148), logged out/attempted to login to test AAA login and now I can no longer login as admin either! I didn't change the local account. I have the Cisco Device Manager open still (in the fabric switch) and how I remedy this (AAA is not up and running as of yet with this switch).
View 3 Replies
View Related
Dec 6, 2012
i have router 7200 , one of its power supply stops working , but lms 4.2 doesn't notify me?
View 6 Replies
View Related
Oct 30, 2011
i bought a Linksys E2000 router. When i went to set it up, i noticed that the old router has a phone line connected to it. When i looked at my E2000, I noticed that it didn't have a phone port in it (Rj11). Not sure what to do. Would it be possible to buy a Rj11 to Rj45 converter and just use that to connect the phone line to my router?
View 1 Replies
View Related
May 27, 2011
I am purchasing a new DIR 600. It pings properly, but didn't access internet. I am using HP Desktop and ORTEL broadband connection.
View 1 Replies
View Related
Jan 23, 2013
I have a Linksys wrt110, and we didnt have a password on it for a while, i went and changed it so we had a password,now i have put a password on it, and now it wont let me connect any device to the internet, checked iphone and mac, nothing will work.
View 2 Replies
View Related
Sep 9, 2012
my sister gave me an old ethernet switch so I could use the internet on my computer and my PS3. Unfortunately I didn't get any type of setup manual so I downloaded one off the manufacturer's website
View 1 Replies
View Related
Apr 14, 2011
I just bought the WAG120N , firmware version is v1.00.12, but it seems it has a problem with the device here.I have to turn off the system / device every time i want to get my dynamic ip update into dyndnds.org , it cant auto update the new dynamic ip.What problem that cause somethin like this?I already upgrade the firmware into 1.00.16 , but it didn't solve the problem.
View 1 Replies
View Related
Jan 20, 2011
I've setted the unit in BRIDGE MODE, and attached on it 3 LAN devices, 1 PC Desktop, 1 NAS WDBE and 1 HP printer ... OK all config process was right and all my units talk togheter via AP Netgear DNG2000, and so i can use for instance the printer with my laptop too connected in WI-FI N. Now usually, In the night I turn off all my devices (DAP included), and when in the morning I need only the printer used by my laptop, obviously I turn on ROUTER - BRIDGE - PRINTER - LAPTOP but NOT the DESKTOP ... and so the DAP can't reconnect automatically to the router (both the lights AP/BRIDGE are on and fixed) ... I turn on the PC and the BRIDGE reconnect to the world .... BUT I DON'T WANT turn on everytime the desktop !
1) all gears has fixed IPs
2) DHCP server deactivated on the AP main router (DNG2000)
3) no WPS used, only WPA2-PSK (AES) personal keys on all gears
once that DAP-1522 is connected to the router .... all work fine (also when I turn off the DESKTOP).so the workaround is never turn-off the DAP ? I can't believe ... and who will save the energy planet
View 2 Replies
View Related
