D-Link DIR-600 :: Pings Properly But Didn't Access Internet

May 27, 2011

I am purchasing a new DIR 600. It pings properly, but didn't access internet. I am using HP Desktop and ORTEL broadband connection.

View 1 Replies


ADVERTISEMENT

Protocols / Routing :: D-Link DSLG604T Pings But No Internet

Aug 11, 2011

I have a d-link dslg604t, i tried to do the frimware upgrade and it froze in the process. Now the internet doesn't work at all. I have uninstalled the drivers, reset the modem and it indicates the modem is working as in i have the two monitors and the blue flashing light between them shown, also all the network settings are there. DHCP is assigned automatically etc etc. I can ping the modem but when i try to connect to the internet i get "detecting proxy server", "internet explorer cannot display the page". "FTP (passive)- Error 12007 connecting to ftp microsoft.com

View 1 Replies View Related

D-Link DIR-615 :: Schedules And Access Control Not Working Properly?

Jan 25, 2012

Trying to set up a simple schedule for keeping the kids from staying up all night.  I'd had this working on a Linksys WRT54G till it bit the dust.  I just want it to block internet after midnight. My problem is that the schedule is triggering the block unpredictably.?

View 3 Replies View Related

D-Link DIR-655 :: Unable To Connect To Internet Properly

Sep 21, 2012

I got D-LINK DIR 651 Wireless Router, so i upgrade this Router to this firmware 1.10NA, release on Aug-24-2012, after this this i configure thois Router with my Modem MOTOROLA SB5101N. So the internet is working fine about an hour, there after on my Modem Send/Received light totally goes OFF, now there is no internet at all in my Home.So i unplug all & i connect my Modem directly to my PC after this i am getting internet perfectly on my PC. Then i call to my ISP they said this is not their problem from theoir site all OK.

[code]....

View 6 Replies View Related

D-Link DIR-825 :: Block Private Ip Pings?

Feb 27, 2011

In the new firmware version is there a way to turn off or not allow anyone to ping my router by blocking any private type of IP address? Which also include loopback addresses?

View 1 Replies View Related

Cisco WAN :: 2911 - Can't Access Internet / NAT Not Working Properly

Jun 13, 2011

I have configured my CIsco 2911 router and there seems to be something wrong with my configuration regarding subinterface 0/0.102 The hosts on this subnetwork cant access the Internet and i cant spot the error.
 
Here is my running config on this matter.
 
class-map type inspect match-any LAN_TO_WAN
match access-group name LAN_TO_WAN
class-map type inspect match-any WAN_TO_LAN
match access-group name WAN_TO_LAN
class-map type inspect match-any GRE_TO_WAN
match access-group name GRE_TO_WAN
class-map type inspect match-any WAN_TO_GRE

[code]....

View 7 Replies View Related

D-Link DIR-655 :: Didn't Get Any Email

May 28, 2011

I have recently purchased six quantities of DIR-655 for my home use. When I registered them these six product, at the end of each registration, I got the message that I will get an email confirming the registration.I didn't get any email. I have checked my email span box and filter too.

View 6 Replies View Related

Linksys Cable / DSL :: Wag200g Could Set Wireless Properly But No Internet Access

Apr 26, 2012

I am basic user of Wireless WAG200G, I am using only as router,the problem is that i could set the wireless properly. When i restart the computer, I couldn't get internet access unless I go to ( 192.168.1.1) & do rebooting for the device. I believe that the setting are not correct.

View 2 Replies View Related

D-Link DAP-1522 :: Didn't Reconnect Auto After Power Cycle

Jan 20, 2011

I've setted the unit in BRIDGE MODE, and attached on it 3 LAN devices, 1 PC Desktop, 1 NAS WDBE and 1 HP printer ... OK all config process was right and all my units talk togheter via AP Netgear DNG2000, and so i can use for instance the printer with my laptop too connected in WI-FI N. Now usually, In the night I turn off all my devices (DAP included), and when in the morning I need only the printer used by my laptop, obviously I turn on ROUTER - BRIDGE - PRINTER - LAPTOP but NOT the DESKTOP ... and so the DAP can't reconnect automatically to the router (both the lights AP/BRIDGE are on and fixed) ... I turn on the PC and the BRIDGE reconnect to the world .... BUT I DON'T WANT turn on everytime the desktop !

1) all gears has fixed IPs

2) DHCP server deactivated on the AP main router (DNG2000)

3) no WPS used, only WPA2-PSK (AES) personal keys on all gears

once that DAP-1522 is connected to the router .... all work fine (also when I turn off the DESKTOP).so the workaround is never turn-off the DAP ? I can't believe ... and who will save the energy planet

View 2 Replies View Related

TP-Link TL-WR841N Not Working Properly

Jan 29, 2012

I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.

View 3 Replies View Related

D-Link DIR-825 :: YouTube Not Streaming Properly

Feb 14, 2013

I got the DIR-835 today and have been spending hours trying to get it to work right. Everything works well except I cannot for the life of me get this router to let me stream youtube properly anymore.

View 1 Replies View Related

D-Link DAP-1522 :: Not Connecting To DIR-815 Properly?

Apr 26, 2011

My problem is two-fold:

1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.

2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.

I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)

Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.

View 4 Replies View Related

D-Link DIR-825 :: Router Does Not Appear To Be Connected Properly?

Feb 11, 2013

So I have a DIR-825, I got from a family member as they didn't need it anymore. (Don't know if its under any warranty at all) I have a few different problems with it:

1. It doesn't install correctly. I insert the disc, the "Checking adapter enabled" finishes quickly and easy. Then the "Checking network status..." goes for about 30 seconds - 1 minutes and then I get the "Your new router does not appear to be connected properly." It gives the Follow these steps message of checking connections/resetting/etc, which I have done multiple times without success.

2. Despite the failed install, I DO get an internet connection. It starts to get weird though. I have 3 different connections currently connected to it with the following properties:

Modem>Computer (Wired) - 16 MB/Second
Modem>Router>Computer (Wired) - 3 MB/Second
Modem>Router>Laptop (Wireless) - <1 MB/Second
Modem>Router>iPhone (Wireless) - 13 MB/Second

I've tried looking through the options on my router but nothing looks like it will work .

View 3 Replies View Related

D-Link DIR-825 :: Can't Get VOIP ATA To Work Properly

Aug 18, 2012

I can't get my VOIP ATA (linksys SPA-2102) to work properly with the shiny new DIR-835. I updated the firmware to 1.02 and messed around with various settings but it just won't work. Well, I can get registered and everything looks ok but, when I receive a call, the person at the other end can't hear me. I can hear them fine, but they can't hear me. I don't have any problem when I call someone. Still, it is frustrating. The problem persist even though I put the ATA in the DMZ.

View 3 Replies View Related

D-Link DCS-942L :: NTP Not Functioning Properly

Jan 27, 2013

My Dlink DCS-942Ls had been updated to the latest firmware both 1.12.1608WW and 1.12.1628EU. (I grouped them into two firmware devices). They are all H/W version A1, agent version 2.0.15-b11.  If I setup time to automatic time configuration and sync with NTP servers ( all from drop down list and Thailand NTP server time1.nimt.or.th) , they did not work and I must set time manually every times I power off and on these IP cameras.  I knew that this issues has been raised for long times and still exist in the current firmware.Simple way to eliminate this problem is specifying NTP server into IP number.  ping your national NTP server URL and then get the IP address , e.g. time1.nimt.or.th has IP 203.185.69.60 , or ntp1.dlink.com has IP 61.67.210.241.  I have tested many ways and the results can be comfirmed that  URL NTP letter cannot sync time but IP number can do.   I also has a DAP-1360 Repeater mode and test with its "System Check" ping test,  the result are success either URL NTP server name and IP number.  NTP protocol is different to ping test. I'm not sure that which parties (ISP, DNS, Router, IP camera device)  should fix this error.    I decided to specify NTP server with IP number to all network devices from D-Link.  Minor risk may occur if a national NTP server change its IP number.

View 1 Replies View Related

D-Link DIR-615 :: Connecting AppleTV To Wireless Properly?

Mar 18, 2012

When I connect my AppleTV to the wireless my AppleTV doesn't see any of the home sharing shares. When I connect it to wired it works fine. What am I missing?

View 7 Replies View Related

D-Link DIR-655 :: Norton Ghost Not Working Properly?

Jan 8, 2011

I've been able to copy files to the WD drive attached to my DIR-655 router but Ghost gets an error even though is recognizes the drive is connected.

View 4 Replies View Related

D-Link DAP-1522 :: ADSL Web Pages Not Loading Properly

Feb 17, 2012

I'm connecting to the internet via ADSL. The modem is in our living room and has a DIR-655 connected to it. Also connected are an IPTV set-top box and an Xbox 360. In our office room we have 2 computers and a Buffalo LinkStation hard drive connected by wire to a DAP-1522 which is working as a bridge for the wireless network created by the DIR-655. The reason for this configuration is that the set-top box refused to work with IPTV through the wireless bridge. Before we got IPTV, the bridge was in the living room and was primarily used for Xbox, while the modem was in the office and allowed all desktop PCs to connect by wire.

Ever since we've had the desktop PCs connected via the bridge, surfing has been difficult. Download speeds are good, but very often webpages simply refuse to load. The browser just says "Connecting to [internet address here]. For example, I might log on to Facebook, have the front page load and then I try to open a picture someone has uploaded, but nothing happens. Clicking links, nothing happens. Clicking anywhere, nothing happens. Put a new address in the address bar, nothing happens. It just tries to connect the addresses, but won't.After waiting a while, or restarting the browser, it might work again for a while.

Is it my new modem, the DIR-655 or the DAP-1522? All devices get their IPs from the ADSL modem to ensure proper networking between the devices. Streaming from the NAS to the Xbox is flawless.

View 4 Replies View Related

D-Link DIR-655 :: Can't Connect Properly To Verizon / Frontier DHCP DSL

Jan 31, 2011

I have a DIR-655 (RevA) which I have been very happy with when used with a broadband wireless ISP.  We just recently obtained Frontier DSL and I want to use my already configured DIR-655 with the new service.  I have successfully bridged the Westell 7500 DSL modem provided by Frontier (DHCP server turned off, mode set to bridge-bridge.)  I tested this by attaching a laptop and verifying that it was assigned a WAN IP address and that I could ping resources on the Internet.

When I attach the DLink and start it up, it gets a WAN address and everything looks good, but I can not ping (from the router) to any resource on the Internet (by IP address), including the assigned gateway.  It goes without saying that computers attached to the DIR-655 are also unable to ping addresses on the Internet.  Oh, I have cloned the Westell modem's MAC address to the DLink router as well.

Any special settings in the DIR-655 that are required to work with Frontier/Verizon's DSL network?  Or compatibility issues?  and I've updated to the 1.35NA firmware.

View 11 Replies View Related

Cisco VPN :: Properly Link 2 Local Vpns RV042

May 22, 2012

The current setup we have contains two seperate networks, each managed by their own Cisco RV042 (10/100 4-Port VPN Router), and each  have their own connection to a Comcast Business Class SMC Modem. (Each has its own static WAN IP provided by Comcast). Both VPN routers have VPN access configured allowing us to connect to our company's corporate intranet and network, and vice versa. Just as a reference point, We will call the first VPN 'GamesNetwork' and the other one 'AdminNetwork'. A problem came up where the computers on AdminNetwork could not access the resources of the GamesNetwork. The problem was resolved by our at-the-time official corporate IT guy but the solution was never explained to me. Recently i got curious and went into the config pages and found that each VPN router was linked to the other the same way corporate links to our VPN's, whch is by using the Internet IP of that vpn... So to me this says we are linking two local vpn networks using their internet connection which is on the same modem.. to me this seems messed up. is this really the way it needs to be done? Now... I have thought of the idea 'make the two networks into 1..' and it could work. but.. i dont have the permission to make this happen.
 
if you have two vpn routers side by side in the same room, is there a more local means of giving 1 vpn access to the resources of the other and vice versa? 

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Port Forwarding Not Done Properly

Mar 16, 2013

Region : Malaysia
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.12.9 Build 120221 Rel.31475n
ISP : UNIFI Telekoms

I am doing port forwarding for 2 webservers i have IP Address is 192.168.0.2 and 192.168.0.4 Both have web apps running find within LAN, both run on port 80.Error code: 14004.

View 8 Replies View Related

TP-Link 150Mbps Wireless :: TP-LINK WR740N - Unable To Access Internet

May 13, 2013

Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2

I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?

View 3 Replies View Related

Laptop Can't Connect Properly To Internet

Feb 19, 2011

I recently bought an asusg73jw xa1 from amazon and at first it worked just fine. But around a month later, when i started it up. It couldn't connect my home's wireless router or if it did, it would have no internet access. I'm pretty sure this problem isn't with my router because all the other laptops in my house can connect perfectly to my router at the same time. After around a week and i tried to connect again, the wireless started working again like nothing ever happened. This only lasted for around 3 days until my laptop once again could not connect to my router. Now the only way i can use the internet is if i connect my laptop to my router with a wire.

View 3 Replies View Related

Internet Doesn't Work Properly?

May 22, 2012

The electric went off in my house about an hour ago, causing my computer to turn off as a result. Ever since, the internet on my PC has been acting up.

My internet was working perfectly before the power cut both on my laptop (my mum was using it at the time) and PC, however, while I've got no problems with the internet on the laptop, my PC keeps losing the connection to a ridiculous degree. It'll drop the connection for over a minute at a time, come back on literally long enough for me to refresh/load 1 webpage (~5 seconds), then go back off again for another minute or two.

All the lights on the router are on and I've even cross-referenced (lacking a better term...) the internet connection between my lap top and desk top and my laptop will work fine when my PC is telling me there's no connection and nothing will load on it. It seems to me that something has happened to my desktop when the power went out but I have no idea where to begin to even try to find out what's wrong.

I've tried turning off the router by both the wall and the little button on the back of it, and I've restarted my PC twice as well and still the internet doesn't work properly. My laptop picked up the connection as soon as the router came back on with no problem but my desktop struggled to find the connection and only picked it up after turning the router off twice aand restarting the computer twice as well and as I said, when it finally did find the connection it just keeps dropping it.

View 3 Replies View Related

Internet No Longer Working Properly

Jun 2, 2011

Last night on the xbox 360 i was suddenly experiencing alot of lag on other peoples voices. i took no notice of it and the next day i went on my laptop and alot of websites wouldn't load properly.i can go on google,obviously this and my hotmail(after having to wait a long time for the hotmail to load), but others such as ebay will not load. I cannot even access my router settings by typing in my ip address, instead i get a message saying the page cannot be found. also i was disconnected from xbox live with the internet to xbox live part not working. Obviously the first thing i done was turn the router off and back on but it hasn't made any difference.

OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4055 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1804 Mb
Hard Drives: C: Total - 290204 MB, Free - 141170 MB; E: Total - 14999 MB, Free - 5644 MB;
Motherboard: Dell Inc., 0G848F, , .5MDJWJ1.CN7016697U05OT.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled

View 3 Replies View Related

Routers / Switches :: Internet Not Working Properly

Feb 26, 2012

ive been having some issues with my internet, i had an attack on my pc recently by some american orginization, ive reinstalled new windows on my pc, reset my modem, and nothign seems to work, i have too many tunnel adapters in cmd ip config i think, bell canada hooked up my internet lines and they actually joined two or more wires together and strung them up on the neighbours fence and mine and even wrapped it around a tree branch, god knows why they would even do that, maybe they think when the tree grows it will cost me money to fix it and theyll earn from thier mistakes instead of learn from them... anyway this is my ipconfig test results as explained in previous post from someone.Windows IP Configuration[CODE]

View 1 Replies View Related

Wired Internet Connection Not Working Properly

Aug 8, 2011

Some Trouble With My Wired Internet Connection,basically it worked somedays other days it cut off and didnt work for a few days,i phoned virgin media who sent me a new modem.Everything is set up and activated and it worked for about a day,now it has stopped working even though the computer says im connected,everytime i try internet explorer or firefox i get a white screen and every webpage i try fails,but if i bring up utorrent i can see that my internet is connected because it begins to download the ebooks

View 17 Replies View Related

Toshiba Laptop Won't Connect Properly To Internet

Dec 5, 2011

my toshiba satellite a200 wont connect to the internet but say is connected to wireless internet but yet i cant browse?

View 1 Replies View Related

D-link Dir-615 :: Wifi Access Point - Getting No Browser Internet Access

Apr 22, 2013

I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.

View 3 Replies View Related

New Computer - Internet Only Works Properly In Safe Mode

Aug 4, 2012

Just finished building my new computer yesterday - i installed windows 7 and all the motherboard drivers etc - everything went smoothly. I then plugged in my ethernet cable but saw that in normal mode my computer had very slow internet. I went into safe mode with networking and tried the internet there and it was its normal speed. Obviously something is booting up in normal mode that is stopping/limiting the connection. I uninstalled norton (came with the motherboard drivers) using the uninstall norton tool, i also uninstalled any other virus protection and disabled my computers firewall but to no avail - it's still real slow.

View 3 Replies View Related

Cisco VPN :: ASA 5110 VPN DNS Not Working But All Pings

Aug 1, 2011

So we've setup an ASA 5510 and users can VPN in no problem, and an IPCONFIG /ALL confirms that the DNS server settings from the group policy have been applied.Group policy sets DNS servers as 192.168.2.8 (internal), 8.8.8.8 (google). Public internet sites work ok.Typing nslookup opens up on the correct internet DNS server, but all requests timeout.

View 6 Replies View Related

Cisco :: Block Pings From Outside To ASA 5505

May 1, 2013

I was asked to block pings from the internet to the outside interface of our ASA-5505 firewall.  I found a post that said to enter "icmp deny any outside", however that does not do it.
 
I created an ACL to try and do the trick, also to no avail:
 
access-list outside_in extended permit icmp any any echo-reply
access-list outside_in in interface outside 
access-group outside_in in interface outside

View 1 Replies View Related

High Pings While Playing Multiplayer Games?

Jun 2, 2011

Now there is an issue that I don't really know how to deal with it and its the multiplayer games ping that I get lately , its about 3 months that I get very high pings when connecting online to a multiplayer server , no matter which game it is , the same happens.

I was getting around 380-470 ping while playing on an European server , but then we solved my last problem (The someone that was connected to my home network) and it reduced the ping to something around 250-300 (sometimes it drops to 100-120).

It is still very high , 3 months ago I had a real bad internet connection and when I was playing on European server's I was getting a stable ping of 100-120 that was normal !

A friend of mine got the same connection that I have and he gets a ping of 100-120 and we play on the same servers (same ISP too).

How can I know where the problems come from ? I did move to a new house in a new area , maybe the ISP server's over there are weak and over loaded ? Because when its like 02.00 AM I am getting a stable ping of 100-120 . What is going on here ? Is there a possibility to ask the ISP to move my connection to another area servers or something like that ?

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved