D-Link DIR-655 :: Unable To Connect To Internet Properly
Sep 21, 2012
I got D-LINK DIR 651 Wireless Router, so i upgrade this Router to this firmware 1.10NA, release on Aug-24-2012, after this this i configure thois Router with my Modem MOTOROLA SB5101N. So the internet is working fine about an hour, there after on my Modem Send/Received light totally goes OFF, now there is no internet at all in my Home.So i unplug all & i connect my Modem directly to my PC after this i am getting internet perfectly on my PC. Then i call to my ISP they said this is not their problem from theoir site all OK.
[code]....
View 6 Replies
ADVERTISEMENT
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Jan 31, 2011
I have a DIR-655 (RevA) which I have been very happy with when used with a broadband wireless ISP. We just recently obtained Frontier DSL and I want to use my already configured DIR-655 with the new service. I have successfully bridged the Westell 7500 DSL modem provided by Frontier (DHCP server turned off, mode set to bridge-bridge.) I tested this by attaching a laptop and verifying that it was assigned a WAN IP address and that I could ping resources on the Internet.
When I attach the DLink and start it up, it gets a WAN address and everything looks good, but I can not ping (from the router) to any resource on the Internet (by IP address), including the assigned gateway. It goes without saying that computers attached to the DIR-655 are also unable to ping addresses on the Internet. Oh, I have cloned the Westell modem's MAC address to the DLink router as well.
Any special settings in the DIR-655 that are required to work with Frontier/Verizon's DSL network? Or compatibility issues? and I've updated to the 1.35NA firmware.
View 11 Replies
View Related
Jan 2, 2012
-Modem Type: Motorola Surfboard (SB6121)
-ISP: Charter Communications, Cable Internet
Unsure why this happens exactly, but every time the D-Link System restarts itself (and at on other random occurrences ever few hours), my D-Link DIR-655 becomes unable to re-connect to the internet. I can only assume it maintains a connection to the modem itself as the "globe" icon on the router becomes orange. No matter how long I wait, the router will not reconnect to the internet.
I am unsure where the problem lies either within the Router or the Modem, but it seems the other routers I own do not have this same problem. The odd thing is that the modem's "internet connection" light never goes out, and the "link" light remains on. The only solution seems to be restarting both the router and the modem, restarting just one won't do.
View 11 Replies
View Related
May 8, 2013
I'm having issues with my wireless router. When i'd set it up it worked perfectly.I decided to take it to my mother's house because the default wifi range there is too short,When i'd set it up, all lights burn green but can't connect to the internet in any way.
View 3 Replies
View Related
May 27, 2011
I am purchasing a new DIR 600. It pings properly, but didn't access internet. I am using HP Desktop and ORTEL broadband connection.
View 1 Replies
View Related
Feb 19, 2011
I recently bought an asusg73jw xa1 from amazon and at first it worked just fine. But around a month later, when i started it up. It couldn't connect my home's wireless router or if it did, it would have no internet access. I'm pretty sure this problem isn't with my router because all the other laptops in my house can connect perfectly to my router at the same time. After around a week and i tried to connect again, the wireless started working again like nothing ever happened. This only lasted for around 3 days until my laptop once again could not connect to my router. Now the only way i can use the internet is if i connect my laptop to my router with a wire.
View 3 Replies
View Related
Dec 5, 2011
my toshiba satellite a200 wont connect to the internet but say is connected to wireless internet but yet i cant browse?
View 1 Replies
View Related
Dec 27, 2011
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
View 13 Replies
View Related
Mar 31, 2013
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : TM UNIFI
I have recently bought a dual band router to replace the aging default router supply by the ISP.
After setting up, I found the message "No Internet Connection". I have checked the log and found that PPPoE was connected. However I am connect to the internet.
View 7 Replies
View Related
May 10, 2013
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
View 1 Replies
View Related
May 16, 2012
My laptop has Intel(R) Centrino(R) Wireless-N 1030 internet card but the computer can not connect to the modem properly, the speed is always not the speed that I purchased
View 1 Replies
View Related
Apr 17, 2013
I have multiple AAA Clients that I need to add. The way I manage the clients, I often make changes of moving IPs from one group to another. I require that all clients use "IP Ranges". I try import the following IPs (8.8.8.1;8.8.8.3;8.8.8.9-10;8.8.8.25) I need them all to be ranges, but what happens is after I import it, I then go to that AAA Client, it makes them all "IP Range(s) By Mask" and siplays it like this.
View 4 Replies
View Related
Jan 30, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
View 2 Replies
View Related
Dec 27, 2011
Cannot get my Intel WiFi Link 5300 wireless card to install properly on my my Latitude 6500 using XP SP3. I can go to the Intel website and download the latest driver but once everything has been downloaded and ran, then restarted the wireless icon says that my driver is not installed.
View 13 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Jan 29, 2012
I bought a TP-Link TL-WR841N which i have managed to setup up properly, i am able to connect to the wireless and get internet access. However the minute i walk out of the room or a few meters away i am disconnected and i can't re-connect, i get the "windows cannot connect to TP-LINK" message. The signal strength in on excellent and i know it works because when i stand near it, it works perfect.I phoned TP-LINK technical support who were pretty useless and couldn't fix the problem.
View 3 Replies
View Related
Feb 14, 2013
I got the DIR-835 today and have been spending hours trying to get it to work right. Everything works well except I cannot for the life of me get this router to let me stream youtube properly anymore.
View 1 Replies
View Related
Apr 26, 2011
My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
View 4 Replies
View Related
Feb 11, 2013
So I have a DIR-825, I got from a family member as they didn't need it anymore. (Don't know if its under any warranty at all) I have a few different problems with it:
1. It doesn't install correctly. I insert the disc, the "Checking adapter enabled" finishes quickly and easy. Then the "Checking network status..." goes for about 30 seconds - 1 minutes and then I get the "Your new router does not appear to be connected properly." It gives the Follow these steps message of checking connections/resetting/etc, which I have done multiple times without success.
2. Despite the failed install, I DO get an internet connection. It starts to get weird though. I have 3 different connections currently connected to it with the following properties:
Modem>Computer (Wired) - 16 MB/Second
Modem>Router>Computer (Wired) - 3 MB/Second
Modem>Router>Laptop (Wireless) - <1 MB/Second
Modem>Router>iPhone (Wireless) - 13 MB/Second
I've tried looking through the options on my router but nothing looks like it will work .
View 3 Replies
View Related
Aug 18, 2012
I can't get my VOIP ATA (linksys SPA-2102) to work properly with the shiny new DIR-835. I updated the firmware to 1.02 and messed around with various settings but it just won't work. Well, I can get registered and everything looks ok but, when I receive a call, the person at the other end can't hear me. I can hear them fine, but they can't hear me. I don't have any problem when I call someone. Still, it is frustrating. The problem persist even though I put the ATA in the DMZ.
View 3 Replies
View Related
Jan 27, 2013
My Dlink DCS-942Ls had been updated to the latest firmware both 1.12.1608WW and 1.12.1628EU. (I grouped them into two firmware devices). They are all H/W version A1, agent version 2.0.15-b11. If I setup time to automatic time configuration and sync with NTP servers ( all from drop down list and Thailand NTP server time1.nimt.or.th) , they did not work and I must set time manually every times I power off and on these IP cameras. I knew that this issues has been raised for long times and still exist in the current firmware.Simple way to eliminate this problem is specifying NTP server into IP number. ping your national NTP server URL and then get the IP address , e.g. time1.nimt.or.th has IP 203.185.69.60 , or ntp1.dlink.com has IP 61.67.210.241. I have tested many ways and the results can be comfirmed that URL NTP letter cannot sync time but IP number can do. I also has a DAP-1360 Repeater mode and test with its "System Check" ping test, the result are success either URL NTP server name and IP number. NTP protocol is different to ping test. I'm not sure that which parties (ISP, DNS, Router, IP camera device) should fix this error. I decided to specify NTP server with IP number to all network devices from D-Link. Minor risk may occur if a national NTP server change its IP number.
View 1 Replies
View Related
Mar 18, 2012
When I connect my AppleTV to the wireless my AppleTV doesn't see any of the home sharing shares. When I connect it to wired it works fine. What am I missing?
View 7 Replies
View Related
Jan 8, 2011
I've been able to copy files to the WD drive attached to my DIR-655 router but Ghost gets an error even though is recognizes the drive is connected.
View 4 Replies
View Related
Feb 13, 2013
Unable to connect my ps3 through D-link router ok if I go from ps3 to modem lan1 connected to computer works fine lan2 to ps3 will not connect
View 3 Replies
View Related
Apr 28, 2011
I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network. The issue isn't with connecting the xbox to xbox live, its with even getting it to connect to the wan.
[code]...
No matter what I do the xbox says it can't connect to the router, and in the router's wireless connections it shows my xbox's MAC address with an IP of 0.0.0.0.I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network.
View 3 Replies
View Related
Jun 8, 2011
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies
View Related
Feb 17, 2012
I'm connecting to the internet via ADSL. The modem is in our living room and has a DIR-655 connected to it. Also connected are an IPTV set-top box and an Xbox 360. In our office room we have 2 computers and a Buffalo LinkStation hard drive connected by wire to a DAP-1522 which is working as a bridge for the wireless network created by the DIR-655. The reason for this configuration is that the set-top box refused to work with IPTV through the wireless bridge. Before we got IPTV, the bridge was in the living room and was primarily used for Xbox, while the modem was in the office and allowed all desktop PCs to connect by wire.
Ever since we've had the desktop PCs connected via the bridge, surfing has been difficult. Download speeds are good, but very often webpages simply refuse to load. The browser just says "Connecting to [internet address here]. For example, I might log on to Facebook, have the front page load and then I try to open a picture someone has uploaded, but nothing happens. Clicking links, nothing happens. Clicking anywhere, nothing happens. Put a new address in the address bar, nothing happens. It just tries to connect the addresses, but won't.After waiting a while, or restarting the browser, it might work again for a while.
Is it my new modem, the DIR-655 or the DAP-1522? All devices get their IPs from the ADSL modem to ensure proper networking between the devices. Streaming from the NAS to the Xbox is flawless.
View 4 Replies
View Related
Jan 25, 2012
Trying to set up a simple schedule for keeping the kids from staying up all night. I'd had this working on a Linksys WRT54G till it bit the dust. I just want it to block internet after midnight. My problem is that the schedule is triggering the block unpredictably.?
View 3 Replies
View Related
May 22, 2012
The current setup we have contains two seperate networks, each managed by their own Cisco RV042 (10/100 4-Port VPN Router), and each have their own connection to a Comcast Business Class SMC Modem. (Each has its own static WAN IP provided by Comcast). Both VPN routers have VPN access configured allowing us to connect to our company's corporate intranet and network, and vice versa. Just as a reference point, We will call the first VPN 'GamesNetwork' and the other one 'AdminNetwork'. A problem came up where the computers on AdminNetwork could not access the resources of the GamesNetwork. The problem was resolved by our at-the-time official corporate IT guy but the solution was never explained to me. Recently i got curious and went into the config pages and found that each VPN router was linked to the other the same way corporate links to our VPN's, whch is by using the Internet IP of that vpn... So to me this says we are linking two local vpn networks using their internet connection which is on the same modem.. to me this seems messed up. is this really the way it needs to be done? Now... I have thought of the idea 'make the two networks into 1..' and it could work. but.. i dont have the permission to make this happen.
if you have two vpn routers side by side in the same room, is there a more local means of giving 1 vpn access to the resources of the other and vice versa?
View 1 Replies
View Related
Feb 5, 2012
I have installed a TP Link W8960N router and it is working fine using the ethernet cable. I have installed a realtek 11n USB adapter but cannot get it to connect to the router.
I uninstalled and reinstalled the software and whereas previously today it found my router (but wouldn't connect it says not associated) when I search now it doesnt even come up!
Windows device manager says the adpater is working properly
When installing router and adapter I set them both to WPA2 and used the same passkey. I am using Windows 7
View 14 Replies
View Related
Mar 6, 2013
I recently purchased a DIR-815 D-Link router. I've set up my network successfully; my laptop and smart phone are easily able to connect. However my desktop is having issues. My network card detects the wireless network I have set up, however the password is always rejected. I am typing in the correct password. I can get the internet to work on my desktop if I connect the router directly by wire, but I need the wireless to work. My desktop runs Windows 7.
View 3 Replies
View Related
May 13, 2011
i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
View 1 Replies
View Related
