Unable To Connect Ps3 Through D-link Router?
Feb 13, 2013Unable to connect my ps3 through D-link router ok if I go from ps3 to modem lan1 connected to computer works fine lan2 to ps3 will not connect
View 3 RepliesUnable to connect my ps3 through D-link router ok if I go from ps3 to modem lan1 connected to computer works fine lan2 to ps3 will not connect
View 3 RepliesRegion : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
I am timing out when attempting to connect to a particular website for all the computers on my network using my DIR-655. I checked my router's setting but I have no website filtering in place. Is there any other router setting which would cause one particular http address to always time out ? When I try to ping the web address it times out also, so it makes me think it is not the DNS server. Of course it could be my ISP, but why would a single web address time out always whereas my normal web surfing ?
View 14 Replies View RelatedI just bought a refurbished WRT160NL router. The router is working fine, but when i tried connecting my Extrernal hdd it is not detecting.
View 1 Replies View RelatedRegion : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP : tata photon plus
I have Tp-link 3g/3.75 wireless lite n Router model number TL-Mr3220 . I have just bought Tata Photon plus device huawei ec156. I am not able to connetct to the usb dongle . How to connect to the USB dongle. Following the ast setup guide . Its saying Unknown PIN status, please insure that your SIM/UIM is on unlock status.
[code]...
Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP : blueyonder
I am having a problem connecting my router to my cable modem. I keep getting the check network status.
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
Region : UnitedStates
Model : TL-WDR4900
Hardware Version : Not Clear
Firmware Version : 3.13.29 B 130126 R 50426n
ISP : Comcast
1. Any device which is switched off (WiFi turned off) wont be able to connect again without a router reboot. I get a connection timeout error when trying to connect. Happens only when there are more than 3 devices connected. (all my devices are ARP linked to MAC addresses with fixed IP addresses - I thought this would eleminate the problem but not)
2. Streaming videos stop playing after 5 minutes. I have to click on the play button to start the stream again. When I test the internet speed through speedtest.net or speedtest.comcast.net, I get over 40MBPS consistently.
3. The router doesnt recogonize 3TB or above HDDs on either ports
4. As long as all devices connect to one channel (either 5G or 2.4G), the connectivity speed is excellent. The moment a device connects to the other channel, the connection speed fluctuates a lot on both.
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network. The issue isn't with connecting the xbox to xbox live, its with even getting it to connect to the wan.
[code]...
No matter what I do the xbox says it can't connect to the router, and in the router's wireless connections it shows my xbox's MAC address with an IP of 0.0.0.0.I installed my DIR 655 today and had no problems accessing the network with any of my computers, however, I am completely unable to connect my xbox to the network.
-Modem Type: Motorola Surfboard (SB6121)
-ISP: Charter Communications, Cable Internet
Unsure why this happens exactly, but every time the D-Link System restarts itself (and at on other random occurrences ever few hours), my D-Link DIR-655 becomes unable to re-connect to the internet. I can only assume it maintains a connection to the modem itself as the "globe" icon on the router becomes orange. No matter how long I wait, the router will not reconnect to the internet.
I am unsure where the problem lies either within the Router or the Modem, but it seems the other routers I own do not have this same problem. The odd thing is that the modem's "internet connection" light never goes out, and the "link" light remains on. The only solution seems to be restarting both the router and the modem, restarting just one won't do.
I'm having issues with my wireless router. When i'd set it up it worked perfectly.I decided to take it to my mother's house because the default wifi range there is too short,When i'd set it up, all lights burn green but can't connect to the internet in any way.
View 3 Replies View RelatedI have installed a TP Link W8960N router and it is working fine using the ethernet cable. I have installed a realtek 11n USB adapter but cannot get it to connect to the router.
I uninstalled and reinstalled the software and whereas previously today it found my router (but wouldn't connect it says not associated) when I search now it doesnt even come up!
Windows device manager says the adpater is working properly
When installing router and adapter I set them both to WPA2 and used the same passkey. I am using Windows 7
I recently purchased a DIR-815 D-Link router. I've set up my network successfully; my laptop and smart phone are easily able to connect. However my desktop is having issues. My network card detects the wireless network I have set up, however the password is always rejected. I am typing in the correct password. I can get the internet to work on my desktop if I connect the router directly by wire, but I need the wireless to work. My desktop runs Windows 7.
View 3 Replies View Relatedi cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
View 1 Replies View RelatedI have the router configured for remote admin from the web outside the network however I cannot establish a connection with the router.Other than adding the check mark and selecting a port are there any other considerations for remote admin?
View 12 Replies View RelatedI got D-LINK DIR 651 Wireless Router, so i upgrade this Router to this firmware 1.10NA, release on Aug-24-2012, after this this i configure thois Router with my Modem MOTOROLA SB5101N. So the internet is working fine about an hour, there after on my Modem Send/Received light totally goes OFF, now there is no internet at all in my Home.So i unplug all & i connect my Modem directly to my PC after this i am getting internet perfectly on my PC. Then i call to my ISP they said this is not their problem from theoir site all OK.
[code]....
I am trying to connect two D-link 24 port switches thru cat 6 cable, distance is less than 50 meters, but its not working but if i connecting it with a Laptop i am able to connect to the network. But if i connect the switch in between it fails i tried changing the switch and cable but no use anyone have a clue how it fails?
View 4 Replies View RelatedI have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies View RelatedRegion : Colombia
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 110915 Rel.40896n
ISP :
i have a TL-WR740N router.I need connect 2 networks.
network 1 => 192.168.1.x connected to WAN port.
network 2 => 10.0.0.0.x connected to LANS port.
Router
assigned address:
192.168.1.101 WAN
10.0.0.225 LAN
[code]....
i can't connect to 10.0.0X network (pcs connected to router lans ports)I need bidirectional connection to networks.
I'm getting an error during setup that says "You are unable to connect to the mydlink web site, and your camera could not be added to your mydlink account."
View 14 Replies View RelatedI recently tried resetting my router (dlink dir-655). I am able to connect using my iphone and my mbp if I did not make use of a secure connection. I tried putting a password on a new ssid. My ipad 2 and 2 other windows laptops are able to connect without any problem. My iphone 4s was having a hard time connecting to the new ssid. It does not connect automatically just in case I turn on and off my wifi connection for the iphone. I have to type in the wpa password whenever I had to go online again. FYI, I tried resetting my iphone several times and I still get the same response. As for my mac, it was far more much worse. Whenever I tried to connect to my router. It usually says connection time out. I tried resetting the router one more time again. I had to put in the old ssid and the old wpa password. My Iphone 4s was abe to connect automatically. My mbp did the same thing also.
View 1 Replies View RelatedJust updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V5
Firmware Version :
ISP : charter cable
I am trying to install a HP officejet 6700 all-in-one wireless printer on my home network. I can see the MAC and static IP addresses in the ARP list but fail to connect to it via my laptop. I have disabled the Norton Internet Security smart firewall and the windows firewall and still fail to connect. I have spent 2 four hour chat sessions with HP and they tell me it is my router. They had me change the channel to 6 from 5 and 11g-only from the 11gb-mixed and it still does not connect. They also had me do a firmware upgrade but the Printer was up to date.
I reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
Today I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : TM UNIFI
I have recently bought a dual band router to replace the aging default router supply by the ISP.
After setting up, I found the message "No Internet Connection". I have checked the log and found that PPPoE was connected. However I am connect to the internet.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One
I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL
I am facing some issue in LAN network.I have connected one desktop( win 7) and another desktop (win xp) to the TP link router. Both the computers got ip address and able to share the internet. But both the computers are not in the same network. That is they cant PING each other. hence they are not visible to each other.
I am using a USB Wireless Lan card to connect to the WiFi for over a year now. Never had any problems. Today suddenly i am unable to locate my WiFi router. This said I am able to see my neighbors router and am also able to connect to it. My router is working on other computers connected through WiFi. Now I have connected to the router through Ethernet and it is working. I would like to connect through WiFi only
ISP : Opennet
Tenda 11N Wireless USB Adapter
TP-Link Wireless Router
we just recently upgraded our router from an old model of d-link to tp link's tl-wr741nd. the wireless router was set up fine. but we noticed that we now experienced disconnection problems. our internet would just disconnect and then connect again every 5 minutes or so. but when i check the modem everything's fine. lights are on. even the lights on the modem are on. this problem never happened on our old router. is this possibly because of the N technology our new router has?
View 13 Replies View RelatedUsing the quick set up of DIR-600 from the CD, I encounter this message:"Your new router does not appear to be connected properly.Follow these steps:
1)Make sure that your are connecting your new router...
2)Make sure the ethernet cable from your PC is securely...
3)Click Retry to try installing your router again."
I tried all several times and still I end up on that screen message.