Cisco :: LMS 4.0 Error With Device Performance Report
Oct 7, 2012Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
View 2 Replies
ADVERTISEMENT
Cisco :: LMS 4.0 Device Credentials Verification Report?
Jan 3, 2012I have a problem when doing this report. If I do a device credentials report on a user defined group (40 devices) 11 of these devices fails to connect via SSH. I can make an SSH connection to all 11 devices from the CiscoWorks server, but 11 devices still fails on the report
Device Name Read Community Read Write Community SSH
1. 149.212.XXX.164 Ok Ok Failed to connect.
2. 149.212.XXX.153 Ok Ok Failed to connect.
3. 149.212.XXX.152 Ok Ok Failed to connect.
4. 149.212.XXX.151 Ok Ok Failed to connect.
5. 149.212.XXX.150 Ok Ok Failed to connect.
[code]....
Cisco :: RME 4.3.1 / Failed To Export Detailed Device Report To CSV File
Apr 15, 2010I try to export a Detailed Device Report to a CSV. It failes:
<HTML><META HTTP-EQUIV="content-type" CONTENT="text/html;charset=utf-8">
<H1>HTTP Status 500 - </H1><HR SIZE=1 noShade>
<P><B>type</B> Exception report</P><P><B>message</B> <U></U></P><P><B>description</B> <U>The server encountered an internal error () that prevented it from fulfilling this request.</U></P><P><B>exception</B>
[code].....
Exporting to PDF works OK.CW is running on Windows server. RME is 4.3.1
Cisco :: Bug Summary Report / RME 4.3.2 - HTTP Status 500 Error
Dec 14, 2011I am trying to generate bug summary report from RME but once job completes i can not see/view report. whenever I am trying to click on view under job result to see reports I get apache/http error. snap shot is attached for reference.
I am running LMS 3.2.1 and RME 4.3.2.. struggle alot to reach this stage where I can see report are getting generated for PSIRT and bug summary..but can not see report for Bugs though I can see PSIRT report...
Cisco :: NTUs Doesn't Report Any Error And Connection Seems To Be Fine
Feb 15, 2012I'm experiencing problems on two cisco switches connected on trunked ports via leased line. The remote site is connected to our main site and I'm getting some weird behavior.Only 2 VLANs are currently trunked and we're experiencing some intermittent connection issues. When sites are connected via trunked port everything works on VLAN 102 and everything on VLAN 101 except there are no internet connectivity, where hosts cannot ping default gateway or proxy.Switches connected are C2960 and C3550 with configuration which was working for 5 years without any issues. BT NTUs does not report any errors and connection seems to be fine. If I interconnect sites via switchport which is on VLAN 101 (staff vlan) everything works fine except student looses the services... because VLAN 102 traffic is not forwarded across the link.
View 7 Replies View RelatedCisco :: LMS 4.0.1 - Error Creating User Tracking Custom Report
Aug 9, 2011Using Custom Reports from Reports> Report Designer> User Tracking to create an end host report we get this error message: the syntax is not valid the system cannot find the path specified.
View 9 Replies View RelatedCisco :: LMS 4.0.1 - Error Creating User Tracking End Host Report
Sep 19, 2011I have installed LMS 4.0.1 again. Now LMS is running on a Windows 2008 R2, 64 bit. Using Custom Reports from Reports> Report Designer> User Tracking to create an end host report I get this error message: "The syntax is not valid: the system cannot find the path specified". Anyway, the report is created but I’m not able to edit or delete: it is not listed on Available Custom Reports.
View 6 Replies View RelatedCisco :: LMS 4.0 Device Update Error
Mar 6, 2013Everytime I try to use the Cisco.com device update I receive the error in the attached file.
I'm not sure if this is related to me not configuring the proxy settings since we do not use a proxy server.
I've configured our CCO username and password only. Is there a known issue with using the web GUI to get updates using the cisco.com option?
Cisco AAA/Identity/Nac :: ACS 5.1 Radius Device Administration Error 11033
Jul 20, 2010I'm trying to configure ACS 5.1 as radius server for a catalyst switch but i can't make it work.I keep on getting the "11033 Selected Service type is not Network Access" error message.
Tacacs works fine but radius does not. Any sample device administration config to use with RADIUS?it seem the service type does not work with radius in this scenario ( radius + device admin).
Cisco AAA/Identity/Nac :: ACS 5.3 Error When Changing Device Group Or Location
Jun 13, 2012I am trying to move a device from the Default location to a sub group and get the following message when I try (either with IE or Firefox)
This System Failure occurred: Index : 0, Size: 0. Your changes have not been saved. Click OK to return to the list page.
it also gives me the same error if I try and change the Device type from default to a sub group. I'm sure I could do this previously. The ACS build is (VMWARE install):
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.228ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: ACS1
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.3.0.40Internal Build ID : B.839
I'm suspecting it a read/write issue with the database or a database corruption. I have stopped and started the application acs via the console and show application status acs has the following to say about itself.
ACS1/admin# show application status acs
ACS role: PRIMARY
Process 'database' runningProcess 'management' runningProcess 'runtime' runningProcess 'view-database' runningProcess 'view-jobmanager' runningProcess 'view-alertmanager' runningProcess 'view-collector' runningProcess 'view-logprocessor' running
Cisco AAA/Identity/Nac :: ACS 5.1 Managed Device Count Exceeded Error
Jul 6, 2010I've just installed ACS 5.1 and noticed that it seems to count managed devices differently than previous versions.
I have a 500 count license which should be fine as I have about 100 devices which will use ACS for TACACS. On ACS 3.x and 4.x, I would set up AAA clients by using a wild card for the subnets that host our routers/switches, say 192.168.1.0/24, 172.16.1.0/24 and 10.1.1.0/24. when I do this with ACS 5, I get a Managed Device Count Exceeded error messasge becasue of the potential of more than 500 AAA clients. It seems to be counting every IP address in the subnet as a managed device, even if there are only a handful actually in use. Is there a way around this short of having to manually enter (and maintain) the exact IP Address of every managed switch and rotuer which will use the ACS server for TACACS?
Error Message Popped Up - Unable To Uninstall Device?
Feb 1, 2011So I was having trouble loading a game on my computer and I was scrolling through forums looking for an answer and one answer that supposively worked for a lot of people was to unisntall and reinstall my network card.IT told me to go to devices -> right click network adapter -> uninstall -> then scan for hardwarer changes to reinstall When I clicked uninstall an error message popped up and said "Unable to uninstall device because device is required on startup" and then it apparently just uninstalled it anyway and it showed back up after I clicked "scan for hardware changes".Now ever since, everytime I try and connect to the internet my computer says "Limited or no connectivity" and I'm unable to access the internet on that computer, the computer I am on now can connect just fine, so it must have something to do with the network card that i supposively unisntalled.
View 17 Replies View RelatedCisco Application :: ACE 4710 Device Manager ERROR In Loading Configuration
Nov 20, 2012When trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.
Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.
-When I'm logged on to the GUI, the above message is displayed in the status bar always.
-It was not recovered by ACE restart it.
-When I try to create the same configuration in a different environment, it did not reproduce.
Cisco Switching/Routing :: NEXUS 7000 Octopus Internal Error In Device 78 Message?
Nov 12, 2012NEXUS 7000 Octopus internal error in device 78 message. I got this on NEXUS 7000 logs:
Nov 12 22:05:14 smale-outside : 2012 Nov 12 21:05:14 BRST: %MODULE-2-MOD_DIAG_FAIL: Module 2 (serial: JAF1548AMKB) reported failure on ports 2/1-2/32 (Ethernet) due to Octopus internal error in device 78 (device error 0xc4e0025b)
Nov 12 22:05:17 smale-outside : 2012 Nov 12 21:05:17 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
Nov 12 22:05:18 smale-outside : 2012 Nov 12 21:05:18 BRST: %MODULE-2-MOD_FAIL: Initialization of module 2 (serial: JAF1548AMKB) failed
[code]....
I only have found:
[URL]
which does not match reality : No one was configuring Vlans.
Cisco :: LMS 3.2 / Error While Downloading New Updates Device Updates?
Sep 25, 2012We have currently LMS 3.2 installed. We know have some new switches C2960-48PST-L that are not supported in CiscoView and Common Services.When trying an update in Software Center | Device Update, we receive an error message:Error while downloading package information from Cisco.com for the selected products. See the C:/PROGRA~1/CSCOpx/log/psu.log file for details.
The psu.log file shows the following:
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyLogin] : No proxy User Name configured
[ Wed Sep 26 14:33:15 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:24 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Wed Sep 26 14:33:26 CEST 2012 ] INFO [SecurityHandler : getCSProxyPort] : No proxy port confgured
[code]....
Cisco :: How To Run IOS Report In LMS 3.2
Feb 13, 2012I'm new to CiscoWorks and I inherited the system in my new job. We are running LMS 3.2 and I want to run a report to see what versions of IOS that are running on the network.
View 3 Replies View RelatedCisco :: RME 4.3.2 - Unable To Run Eos / EoL Report?
Apr 4, 2012Unable to run Eos/EoL report, I get error that my cisco.com credential are not valid, I verified my credential and they work fine. I'm running RME4.3.2 on Solaris 10.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: Log Report In ACS 5.3?
Mar 3, 2013I have cisco acs 5.3 appliance. Issue is, when i view tacacs accounting it only shows 100 pages of records. So first kindly tell me if this is the limitation of acs 5.3 to only show 100 pages. Secondly if i want to export the report of last 30 days, its also not showing the last 30 days.
How to get the report of last 30 days
Cisco :: LMS 3.1 - RME Cannot Generate Syslog Report
May 17, 2011I have an issue with rme 4.2 from LMS 3.1 When I try to generate a syslog report this shows me nothing. I locate SyslogCollector.log file and I see sometnig wrong.
View 4 Replies View RelatedCisco :: Uptime Report Using CWLMS 3.2
May 6, 2012Is it possible to run an uptime report using CWLMS 3.2 ?
View 2 Replies View RelatedCisco :: LMS 3.2 - EOL / EOS Report Generation Fails
Aug 17, 2011I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco.Saw an update i LMS portal as this:
Now Available! LMS 3.2:Patch for un-interrupted service of Cisco.com download for Device/Software/PSIRT/EOX updates (To be applied on or before 15-June-2011)
so upgraded the patch cwcs33x-win-CSCto46927-0.zip and restarted the demeon as read in the read me file for the patch.Now the job execution status is always shows running, its neither fail nor pass.
Cisco :: Interpretations Of 802.11 Counters Report On WCS
Sep 29, 2009My customer recently deployed WLCs and WCS in their environment. However, recently they experienced slow performance. To futher finding out the root cause, I generated the 802.11 counters report from the WCS and noticed the following parameters is shown. Tx/Rx Fragment Count/Sec and FCS Error Count/Sec
1. Can I make the assumptions that the overall transfer of packet rate in that interval is the Total of Tx/Rx Fragment Count/Sec and FCS Error Count/Sec?
2. If the output rate of Tx/Rx Fragment Count/Sec and FCS Error Count/Sec are the same, does it mean that 50% of the packet are corrupted and this high FCA Error Count/Sec will cause performance degradation to the wireless througphput?
3. What is the baseline of the FCS Error Count/Sec that is acceptable? As for the case with wired, 1% error rate is acceptable. Will wireless have the same baseline?
Cisco :: LMS 4.1 Credential Verification Report
Nov 6, 2011when running Credential Verification Report, I get following notification: "None of the devices have credential verification data".I have made different Default Device Credential sets that I'm using when I add devices to LMS. I could not see wether this is bug in LMS 4.1 or if I have to do this a different way?
View 1 Replies View RelatedCisco :: LMS 4.0 IP SLA Availability Report Is Incorrect?
Jun 22, 2011I'm polling a few thousand locations using IP SLA, I have responder enabled on all destinations, and I'm using 60 byte voice packets with a QoS policy.When I run an IP SLA Summary availability report, I have a bunch of locations showing 9% availability 8.5% etc. When I go to the actual collector, and pull up a graph of the same time period, that graph shows 100% availability.
Same collector, same data, just different views giving completely different results. I have to assume that the IP SLA summary report is wrong, these sites were not down 90% of the time.
Just a random though to go with that, I do have the IP SLA to only pull information during the locations operational hours, and I did pull the report from midnight to 11am, the statistics should have been gathered for 4 hours of the 11, which is still higher than 9%, and I would expect all of my locations to report like that, not just a few hundred.
All of the devices are similar in hardware and IOS, and I have verified on a handful that IP SLA responder is enabled, and I see the connections, I have also verified the source configuration via command line.
Cisco :: CiscoWorks LMS 4.0.1 - Could Not Generate The Report
Sep 26, 2011I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Cisco :: 4507R-E And RME Config Change Report?
Aug 22, 2011We have a new 4507R-E Switch which RME keeps reporting as "CONFIG_CHANGE" each evening. When you click to see the change, the only thing that has changes is the "ntp clock-period".
However, we have configured "ntp clock-period" as an exclude command in RME Config Managment.
Cisco :: LMS 4.0.1 / Understanding Change Audit Report?
Jun 27, 2011I need to understand why change audit report reports an unused username Name of the user who performed the change. This is the name entered when the user logged in. It can be the name under which the LMS application is running, or the name using which the change was performed on the device. #The User Name field may not always reflect the user name. The User Name is reflected only when: A config change was performed using LMS. #A config change was performed outside of LMS, but the network has username-based AAA security model, wherein authentication is performed by an AAA server, which could be TACACS/RADIUS or local.
View 2 Replies View RelatedCisco :: WCS 7.0 Bug In Security Index Detailed Report?
Nov 9, 2010Just looked at report after having upgraded to WCS 7.0. It is reporting that SSH is disabled. It is enabled on the controller. The timeout value was set to zero for telnet access. No indication was given that the telnet timeout value also affected SSH as well. I set the timeout value to a non-zero number and reran the task that generated the report. The Enable SSH line item on the report no longer shows up.
View 2 Replies View RelatedCisco :: Use EEM To Report On Interface Up / Down 6509 And 3750?
Sep 6, 2011I have just started to discover the power of EEM and am already monitoring config changes on our switches with EEM.I would like to be notified of any interface going up and possibly down. on our 6509's and 3750's This is just to be aware of anyone patching anything in.
View 1 Replies View RelatedCisco :: LMS 3.1 Unable To Generate BUG Summary Report In RME
Dec 12, 2011I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014..I am using LMS 3.1 attaaching snap shot of my patch level and application version running on LMS...
View 3 Replies View RelatedCisco :: LMS 4.0 - No Devices For Switch Port Report?
Jul 3, 2011When i am in report generator to create a unused up report i have any of my devices in the devices selector menu. This a same for all reports of the switchport menu. But for the other menu like inventory performance my devices appeard. I make a reboot of my server but no change. I'm looking the logs.
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.x Tacacs Accounting Report
May 14, 2013I am setting up reports for tacacs accounting on ACS 5.3. However, accounting only seems to work after entering enable mode on the switch. I would like to see all commands, even the enable command when in privlage 1 mode.
View 2 Replies View RelatedCisco :: How To Generate Report For All Existing Subnets Using LMS 4.2
Dec 5, 2012How to generate a Report for all ur existence Subnet's using LMS 4.2?
View 2 Replies View Related