Cisco Switching/Routing :: Are WS-X6148-GE-TX / WS-X6148A-GE-TX Compatible With WS-X6K-SUP1A-2GE
Mar 17, 2013Are the WS-X6148-GE-TX and WS-X6148A-GE-TX compatible with WS-X6K-SUP1A-2GE and Sub-Model WS-F6020A?
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Difference Between WS-X6148A-GE-TX And WS-X6148-GE-TX
Jun 6, 2012What is the different between WS-X6148A-GE-TX and WS-X6148-GE-TX ? Currently, I can not use MTU command on X6148 but can on X6148A.This two cards installed in cat6509E.
View 2 Replies View RelatedCisco Switching/Routing :: Have Redundancy Between WS-X6K-SUP1A-2GE And WS-X6K-S2-PFC2
Mar 26, 2012I would like to know if i can have redundancy between these Supervisor Engine (on the same chassis) :
WS-X6K-SUP2-2GE & WS-X6K-S2-PFC2
I already know that WS-X6K-SUP2-2GE + WS-F6K-PFC2 = WS-X6K-S2-PFC2, but i'm not sure if we can have compatibility(redundancy) between these two cards.
Example :
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-S2-PFC2 yes standby
2 2 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
Cisco Switching/Routing :: Catalyst 6500 Supervisors Differences Sup1A Vs Sup32
Feb 16, 2012I understand that my questions seems to be rather strange cos supervisors is rather old (Sup1A especially). But i am interested in understanding what puprpose were in production SUP32. I cant find out enough differencies between Sup1A with MSFC2 and Sup32 to understand what reasons lead to deploying new sup in none fabric supervisor series.
Both supervisors have same perfomance - 15Mpps and have limitation on backplane bandwith of 32 Gbps (cos both use swithing bus), both supervisors equipped with MSFC2 and etc. Differencies i found:
SUP 32 have 10Gbe ports support (but this seems to be doubtful enhancement - with it perfomance GE ports seems to be more appropriate technology isnt it?) SUP1A equipped with PFC, SUP32 with PFC3BSUP32 deploys CEF (what is benefit of CEF if perfomance same?)
Cisco Switching/Routing :: Doubt About WS-X6148A-GE-TX Port-ASIC Mapping
Jan 4, 2012Can some clarify what is the Port-Asic mapping in WS-X6148A-GE-TX.
View 3 Replies View RelatedCisco Switching/Routing :: How Port-ASIC Mapping In Linecard WS-X6148-GE-TX
Dec 28, 2011how is port-ASIC mapping in linecard WS-X6148-GE-TX?
View 5 Replies View RelatedCisco Switching/Routing :: WS-F6K-FE48-AF (WS-X6148-21AF) Support With SUP720-10G
Jun 14, 2012Running WS-F6K-FE48-AF InlinePower daughtercards with SUP720-10G?
The release notes mention that the following daughtercards are supported:
WS-F6K-GE48-AF
WS-F6K-48-AF
[URL]
But, specifically, the WS-F6K-FE48-AF is not mentioned.
We need to upgrade the supervisor in multiple 6500 chassis full of WS-X6148-21AF modules with WS-F6K-FE48-AF daughtercards, and we want to make sure there are no compatibility issues.
Cisco Switching/Routing :: X2-10GB-SR Compatible With GLC-SX-MM?
Apr 9, 2013one side Catalyst 6500 module with X2-10GB-SR= otherside WS-C2960S-48FPD-L.
is both end compatible with each other.
Cisco Switching/Routing :: 2FE-2W Compatible With 2821?
Dec 6, 2011I have a 2Fe-2W Card and wanted to find out if it can be picked up and installed on a Cisco 2821? Below is the version
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(8a), RELEASE SOFTWARE (fc2)
Technical Support: [URL]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
System image file is "flash:c2800nm-adventerprisek9-mz.124-8a.bin"
Cisco Switching/Routing :: SRP541 Is Compatible With SDM?
Jul 19, 2012I am trying to build a site-to-site VPN between cisco 1811W on a main office and SRP541W on a remote office.I already have the configuration for the 1811W through SMD, but can't install the SDM on the SRP541W.Does the SRP541 is compatible with SDM; and if not is there any other GUI to configure a VPN tunnel on SRP541.
View 1 Replies View RelatedCisco Switching/Routing :: X2-10GB-SR Compatible With 3750-E?
Jan 31, 2012i will be buying 2 x 3750-E and will connect our server with 10G to the x2 port of 3750. is X2-10gb-SR compatible with this? do i need any converter module?
View 1 Replies View RelatedCisco Switching/Routing :: Is HWIC-2T Compatible With 2800 Routers
Oct 17, 2012Just need to verify if HWIC-2T is compatible with the Cisco2800 routers?
View 4 Replies View RelatedCisco Switching/Routing :: Which WIC Or NM Ethernet Card Compatible With 2620
Jan 10, 2012Which WIC or NM Ethernet card is compatible with a 2620, (non XM) router? I have seen conflicting information on compatibility. I am wanting to connect this router via an Ethernet Port with a non Cisco router that is connected to my ISP.
View 1 Replies View RelatedCisco Switching/Routing :: WS-C3560-48PS SFPs Compatible With 2960-S Switches
Jan 3, 2013I need to replace an older 3560 with a new 2960-S and am wondering if the SX SFPs I already have will be compatible with the 2960-S. [code] I cannot find any way to get the part numbers of the SFPs.
View 7 Replies View RelatedCisco Switching/Routing :: 2960 Setup - Compatible Spanning Tree Protocol
Jan 9, 2012At a college I'm trying to setup a Cisco 2960 to be used on a VLAN 248 tagged on the uplink port that uses Spanning Tree/. Here is the following from the Cisco:
show interfaces trunk
Port Mode Encapsulation Status Native v lan
Gi0/1 on 802.1q trunking 1
Port V lans allowed on trunk
Gi0/1 248
[code]...
On the Alcatel OS6850-48L the following is setup: bridge 1x1 248 priority 3287 Vlan 248 802.1q 5/8 "cisco"
I cannot make a change on the Alcatel, I can only administer the Cisco. I was able to get things working fine (as a test) using a Net gear or HP switch instead of the Cisco. However we have a Cisco switches and would not like to have to buy HPs. Is there a compatible spanning tree protocol to use on the Cisco with the way things are configured on the Alcatel. I need to stick to standard RSTP (802.1w) ieee standards and not something Cisco proprietary.
Cisco :: WS X6148A RJ45 ASIC / Port Group Utilization
Mar 8, 2012Is there a way to view the utilization on a WS-X6148A-RJ-45 ASIC/port group?
View 7 Replies View RelatedCisco Infrastructure :: Two WS-X6148 With Even / Odd Port Failure?
Feb 8, 2012I have two WS-X6148-45AF linecards here that have been out of use for quite some time. Upon inserting them in one of our 6509-E's I noticed that both had "Minor Error"s on their module diagnostics.
I would have just assumed that the cards were dead and requested replacements, but both cards have the *exact* same diagnostic errors, which only seem to effect every-other port. That's too much of a coincidence for me, so I figured I'd ask on the forums and see if I'm just missing something obvious before I assume the worst. Are these cards both somehow damaged in the exact same way? Or is there some config/compatibility issue that I haven't heard of?
relevant diagnostic output from one of the cards (Both outputs the same, no use posting twice) is below:
Router#show diagnostic result module 4
Current bootup diagnostic level: minimal
Module 4: 48-port 10/100 mb RJ45 SerialNo : SAL11391VUY
[Code].....
Cisco WAN :: Compatible IOS In 881?
Jan 22, 2013I have a Cisco Router 881 with c880data-universalk9-mz.150-1.M7.bin IOS file. I want to upgrade to the latest IOS c880data-universalk9-mz.152-4.M2.bin. But when I upload the file, it appears the message The selected file c880data-universalk9-mz.152-4.M2.bin is not compatible with this router model.
View 4 Replies View RelatedCisco :: ACS 3.3 And WLC 5508 Compatible?
Aug 21, 2011I have a customer with an ACS for Windows version 3.3. I know the ACS is End-of-support, but if I could do Authentication for a WLAN with a Controller 5508 Softwareversion 7.0.116.0 and how?
View 3 Replies View RelatedCompatible LAN Driver For M2N-MX SE PLUS?
Aug 9, 2011compatible LAN driver for M2N-MX SE PLUS
View 4 Replies View RelatedCisco WAN :: NM-2W Is Compatible With 3845 And 3945?
Dec 27, 2011I wanted to confirm if the NM-2W is compatible with 3845 (says it is compatible) and 3945.I wanted increase WIC density in these routers to install ISDN HWIC-4B-S/T 4-port ISDN BRI High-Speed WAN Interface Card.However, i am not sure if these cards are compatible on the NM-2W. Is there any other NM* module that can extend WIC density on those routers.
View 1 Replies View RelatedCisco LAN :: Is Power Brick For 877 Compatible With 871
Apr 20, 2013just a quick one, is the power brick for 877 compatible with 871?
View 6 Replies View RelatedXP And Windows 7 Are Not Workgroup Compatible?
Mar 18, 2011I have a desktop PC running WinXP I recently got a laptop running Win7. I Set both of them up with the same workgroup name, and now my XP machine can see and access my laptop, but my lap can't see my XP machine. If it makes any difference, I can remote into my XP from my laptop, but that's not what I need.
View 3 Replies View RelatedUsb Wireless Adapter G Compatible With N?
Jan 11, 2011I have wireless N router and just got wireless G usb adapter... but i dont get it to work.... can i manage to get it working or i need another adapter?
View 2 Replies View RelatedCisco WAN :: RV042 EU And Switch SG300-20 Compatible?
Feb 1, 2012i have confussion in my layout network design if this device working properly if i put this to my netwok. i want to config my router with 3 different subnet and in switch area i want to create 3 vlans with different subnet on each. may question is, is this posible for this kind of router to route my vlan network? here is the IP address i want to add in IP Table.
View 2 Replies View RelatedCisco Switches :: GBIC Compatible With SR224G?
Sep 4, 2011Can I use a Cisco GBIC (p/n 30-1301-02) in SR224G?
View 2 Replies View RelatedCisco Routers :: To Use Compatible 3G / 4G USB Modem Via SRP547W
May 29, 2012Currently, I have setup a demo lab with the UC320W + IP Phones and OnPlus Network Agent all connected to a SG300-28P. I have just obtained an SRP547W because I wanted to use the 3G/4G internet connection via the router as my demo lab is an isolated network.Now, I tried to a couple of 3G modem (UMG181) and 4G Telstra modem (MF821) on the SRP547W but none of these work. I had a look at the compatibility tableI guess those modem models are not listed there. However, when I went on say the Optus website to scout for a more compatible model, none of them hit it right on the mark. The matrix says it can support E180 (while Optus has the E188), E353 (while Optus has the E353). I have already wasted my money on getting the earlier stated 3G/4G Modems and I ain't going to take a chance again.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Compatible Nexus 5020 5.0.2.N2.1 With Tac Plus?
Sep 10, 2012I have a problem with the switches Nexus, is impossible authenticate from tac_plus. In other company, I configured ACS for authenticate the Nexus Switches and OK The configuration of my tac_plus is:
user = gian {
login = cleartext prueba
member = nexus
group = nexus {
default service = permit
service = shell {
#double-quote-values = yes
#shell:roles=""network-admin""
cisco-av-pair*shell:roles="network-admin"
The configuration of switch is:
tacacs-server host xx.xx.xx.xx key 7 "xxxxx"aaa group server tacacs+ AAA_TACACS_SERVER server xx.xx.xx.xx source-interface mgmt0
aaa authentication login default group AAA_TACACS_SERVERaaa authorization commands default group AAA_TACACS_SERVER localaaa accounting default group AAA_TACACS_SERVER
Cisco WAN :: Is GBIC SFP-10G-LR Compatible With 100Mbps Speeds
Mar 21, 2011Imagine I have from customer side SFP-10G-LR GBIC.Then circuit to be deployed is 1310nm, Metro. My question is, if I will receive 100Mbps from such circuit, is this 10 GBIC compatible with 100Mbps? 10GBASE-LR SFP+ transceiver module for SMF, 1310-nm wavelength, LC duplex connector )
View 3 Replies View RelatedCisco :: Load Mibs Compatible With ASA 5505
Feb 29, 2012I'm running HP nnm9i and want to load mibs that are compatible with the cisco ASA 5505, 10 and 20 series. From where I can download these mibs.
View 2 Replies View RelatedCisco WAN :: SA-VAM2+ Compatible With 7201 Router
Sep 11, 2011Is a SA-VAM2+ compatable with a 7201 router? When I look in the configuration tool I don't see that option.
View 1 Replies View RelatedCisco WAN :: ASR 1001 Compatible Fiber Modules?
Aug 14, 2011We've recently bought a cisco asr 1001 Router and I have a number of interface slots. I want to populate these with fiber modules.
Which fiber modules are compatible? Are the regular SFPs ok to use or is there a special asr series of SFPs to use?
Cisco Wireless :: 5508 WLC - Compatible SFP Modules?
Dec 10, 2012I recently purchased a Cisco 5508 WLC and I'm looking to buy some SFP modules but can't find info on which ones would be compatible with the controller on Cisco's website . Is there any module that can support 10Gb as I have a 10Gb on the other end (switch end)?
View 6 Replies View Related