Cisco Switching/Routing :: Discovering ASA 5510 Devices In LMS 4.2.3
Dec 9, 2011i'm currently deploying LMS 4.2.3 Demo version and i'm unable to discover my ASA 5510.how to discover my ASA to mange it in my Cisco Works 4.2.3.
View 35 Replies
ADVERTISEMENT
Cisco :: Devices Discovering By LMS 4.0
Oct 9, 2011I have LMS 4.0 server installed without any problems on windows server Enterprise edition service pack 2 then i enabled SNMP on cisco switches and routers by the following commands [code] But when i tried to discover cisco devices and after trying many times theres no result so correct commands required to be enabled on cisco devices.
View 2 Replies View RelatedCisco :: NCS Not Re-discovering WLC 5508-50
Oct 30, 2012NCS 1.1.1.24 (PRIME-NCS-VAPL)
5508-50 WLC 7.0.235.3
I had to re-IP this WLC onto another management vlan. Prior to the IP change and code upgrade I removed the WLC from NCS.When attempting to re-add the WLC to NCS, I finally found the it in Configure>Unknown Devices. Now NCS is showing the Device Type as Unknown, and Inventory Status Detail as Unsupported device, and reachable.
Cisco Switching/Routing :: 3750 - IOS Update On Several Devices
Jul 4, 2012I got 10 Catalysts 3750 (all of them identical) and I got the IOS Update. Anyway I only have service contract for 4 of them.
Am I allowed to update all of them? Or only the four devices which have the service contract?
Cisco Switching/Routing :: Connect Devices To 6509
Apr 11, 2012My question is if I do not want to purchase any additional switches can I connect the devices to the 6509 and put them in their own separate vlans?I am a little fuzzy about the physical connections needed to make this design work as it is.
View 9 Replies View RelatedCisco Switching/Routing :: Add N2K To Existing N5K - Can't Ping Devices
Mar 5, 2012I have several cabinets with top-of-rack N2K's attached to N5K's via FEX's. 9 cabinets with 2 switches each.
Recently I added 3 more cabinets to the mix, for a total of 12 cabinets with 2 switches each.
I can get into the new switches and see the FEX's and configure ports, etc. but no device I attach to the 'new' N2K's is pingable over the network. I can take the same device, same cable, and attach it to a legacy N2K talking to the same N5K's, and it immediately joins and is pingable over the network
Retina Not Discovering Cisco Switches
May 23, 2012I have a team onsite this week inspecting us. We found out yesterday that Retina is unable to access several of our switches. Said switches are able to be pinged from workstations on both of our main VLANs, I can SSH to them from any computer which is included in the ACL (and yes, the Retina server is in the ACL). Users can login to and access all network resources without issue. Each switch is configured with a management IP on the same VLAN. I have created a full-permissions user on each switch specifically for scanning use.
All switches are running the same code (12.2(58)se2). I was just able to SSH from one switch to another (with the user account made for the Retina scan), all through the stack of switches experiencing the problem. While doing so, I did a how log | incl <IP of the Retina server>. 90% of the switches had no records for that IP (thus no attempted connections). The few that did have record of it, reflected a connection over 24 hours ago- and we've just tried it several times within the last 6 hours (it was 0300 when I sent this email to coworkers that I'm snipping into this post).
Cisco Switching/Routing :: How To Configure Kompella L2vpn Between Devices
Oct 18, 2012I want to know how to configure kompella l2vpn between 2 cisco devices in CISCO IOS. We know Martinna l2vpn type runs on LDP. but kompella runs on BGP. I need the configuration for same..
View 2 Replies View RelatedCisco Switching/Routing :: Shut Down Procedure For Devices 5508
Oct 15, 2012Is there any shut down proceedure for cisco devices in data center cisco router,switches,firewalls ASA-5580-20,ace-4710 and IPS-4260 devices.
View 4 Replies View RelatedCisco Switching/Routing :: 2960 - How Much POE Watts Can Be Reduced On Certain Devices
Jun 21, 2012I'm getting currently installing a full Valcom IP sound and clock system , along with all new Cisco 2960 gig ps-l switches. All devices run off of POE. In the past, I have read that most AP's only draw approx. 12.5 watts (va's). But you must take into account length of wire to add your additional draw which puts you at the 14.5 they auto draw. My question being that the clocks I have auto draw 15.4 watts, which is eating up my 370w of power on my switches. The spec sheet on the clocks show only a power consumption of 4.5 watts. So today I turned a few ports down to 4.5 watts and everything still worked fine.. Any experience by chance with Valcom devices or just turning the power down on devices in general? I can imagine that a clock is drawing enough to care about the length of the wire run.
View 8 Replies View RelatedCisco Switching/Routing :: 7206 VXR - Multiple GRE Tunnels Between Two Devices
Nov 18, 2012Has come across issues with multiple GRE tunnels between two devices when using the same source and destination addresses. I've tried using tunnel keys but this makes no difference. The only way I can get this to work is between different source & destination addresses.
View 4 Replies View RelatedCisco Switching/Routing :: POE Devices Not Working As Expected AIR-CAP3502I-A-K9
May 29, 2012I have 10 new AIR-CAP3502I-A-K9 connected to a WS-C3750X-48PF-L switch. 8 of the APs power on and connect perfectly, but two are problematic. Both devices are granted power, but they never go past the stage of getting power from the switch. A look at POE shows: [code]
Where the AP that is not working is connected to Gi1/0/4. The interface shows down/down. I've tried shutting the interface, removing power, cdp etc.
Are there any other tricks you can think of to get it working or would you say that it's 2 faulty APs? I am not based at site unfortunately so I cannot console to the APs and check them out.
Cisco Switching/Routing :: E4200 Not Giving Android Devices Connection
Jan 3, 2012I just upgraded to the e4200 v2 and I seem to be having connection issues with my android phone and tablet. Both are 802.11n compatable but they seem to have issues staying connected. Just so everyone is up to speed, there are two connections made by android, a general one to the internet, and a second one to the google servers (for syncing e-mail and contacts and the like) When just connected to the internet, the wireless icons are gray, when connected to the google servers as well, the icons turn blue. It's the drop in connection to the google servers that I'm having an issue with. I currently have the router set in full auto for channel and frequency band, but I've also tried setting specific ones thinking maybe the change in channel or something was causing the disconnect. The disconnect will even happen when I'm sitting right next to the router. The phone is a Samsung Galaxy Nexus (Verizon LTE) running Android 4.0.3 and a Asus Transformer tablet (Wifi only) running android 3.2.1.
View 3 Replies View RelatedCisco Switching/Routing :: Firmware Upgrade For SRP527W To Support More Usb Devices
Jan 21, 2013im guessing there is zero chance of a firmware upgrade for the SRP527W to support more usb devices is there?
View 1 Replies View RelatedCisco Switching/Routing :: 2950 - Devices Can't Connected To Server At Core Sw
Jan 11, 2013In my organization we have several 2950T that conected each other. We have 4 floor with each floor have 1 sw except 4th flr have 3 sw.
Main server, apps, db ( 15 units) connected to core sw at 4th flr. Currently the problem is others devices can't connected to the server at core sw. Test ping and the network to core sw is intermittent problem. When ping 100 times only 30 reply. After 10 minutes the connection restored. Ping 100 times successful. It will not having problem again until the next day. This already happen 3 days. Any command for me to use to check if port or the switch having problem? Any log i can collect
Cisco Switching/Routing :: 887 - How To Restrict Devices Connected To 800 Series Router
Jan 30, 2013I have a Cisco 887M router which I wish to restrict the devices allowed to be connected/allocated an IP address to two, and *only* two.
I can't, for the life of me, find out how to allow these two devices to connect to ANY port - I can configure a MAC restriction on a single port, but I don't know how to make it so that I can allow JUST these two devices to connect to any port in the 4 port switch/VLAN (VLAN 1 is used because the mongrel who set this up was lazy). I know the MAC addresses I want to allow
How I can do this? I *can* restrict any given port to the two MAC addresses - but if I try to add the MAC addresses to another port, they get removed from the initial one. I need to be able to have them connect to ANY port and work, but allow NOTHING else to work.
For those wondering, this is to counter a user who is utilising company resources for purposes not approved - and costing us quite a bit of money in the process.
Cisco Firewall :: PIX 515E Discovering Isakmp Key For Those Vpn Tunnels
May 10, 2011We have a PIX firewall 515E running version 6.3(4) and there are few site to site VPN's installed on it. We want to find out the isakmp key for those VPN tunnels. On ASA, We can run the command "more system..." and it displays the key, but it seems it doesn't work on the PIX 515E.
View 1 Replies View RelatedCisco :: ASR1006 - Discovering Netflow Aggregation Cache
Sep 28, 2011We have an ASR1006 and I'm just discovering net flow aggregation cache.
I tried prefix aggregation and worked fine. But i cant get any information when checking AS aggregation. All I get is 0 in source and destionation AS. [code]
Cisco Switching/Routing :: C3750X When Run Command CDP NEIGHBORS / 3400 Shows No Devices
Aug 6, 2012We just installed a Cisco ME-3400EG switch at one of our sites. A Cisco C3750X switch is connected to the 3400. When we run the command CDP NEIGHBORS, the 3400 shows no devices. We can access the 3750 via the 3400. Also, when we run CDP NEIGHBORS on the 3750 we do not see the 3400 (but other devices are displayed). How can we get CDP to display the devices on the 3400? We have already tryed CDP RUN.
View 5 Replies View RelatedCisco Switching/Routing :: 2960 - Upgrade IOS Image On Multiple Devices Same Time?
Sep 5, 2012I have a 10nos of cisco 2960 switches and 1no of cisco 3725 gigabit switch. all 2960 switches are parallaly connected to 3725 switch though fiber.
all the switches are having same vlan and public ips for management.
Now I want to upgrade IOS for all 2960 switches at a time, how to up grade IOS same time for all switches.
Cisco Switching/Routing :: 6500 - Randomly Devices Will Drop Offline And Then Come Back
Aug 28, 2012I have a network that has a pair of 6500 switches on either end, running HSRP. In between each 6500 are two to three ruggedcom switches. They are connected to each other and the 6500's by trunk ports in a straight line. The 6500's see each other as CDP neighbors, and the 6500's can see the rugged- com as LLDP neighbors (ruggedcom only supports LLDP).
The issue is that randomly devices on the ruggedcoms will drop offline and then come back. The problem is that the devices that drop offline are all in the same VLAN, so it appears like a virus - i.e. one device drops off, then multiple. Eventually the HSRP starts flapping between the two 6500s and this causes havoc on the network.I'm almost to the point of taking a laptop and plugging it into one of the ruggedcom's to see traffic, but the issue is that the ruggedcoms are outside in cabinets that laptops shouldnt be exposed to.
Cisco Switching/Routing :: ASA 5510 Routing Specific Traffic To Inside Router
Nov 7, 2012I have an ASA 5510, with Ethernet0 connected to Internet via a T1 line, Ethernet1 connected to LAN1, and Ethernet2 connected to LAN2. LAN1 & LAN2 are independant, but share the Internet connection, via the T1 line. On LAN2, I have another router that connects to the Internet, via a Comcast line. I wish to route some of the traffic on LAN2 (10.38.77.0) to the other Router, on LAN2 (10.38.77.12) (connected to the Comcast line). I have entered the following lines:
route inside2 10.11.0.0 255.255.0.0 10.38.77.12 1
route inside2 10.252.0.0 255.255.0.0 10.38.77.12 1
route inside2 172.22.6.0 255.255.255.0 10.38.77.12 1
I can trace the routes from the ASA 5510 (1st hop is to 10.38.77.12), but not from anything else on LAN2.
Cisco Switching/Routing :: ASA 5510 / Routing Mobile Users Via VPN To Different Gateways
Oct 6, 2012I have mobile users using air cards that connect to the network with a VPN product called Net Motion. Our firewall is a ASA 5510. Once connected to the Net Motion VPN server the user will get a DHCP address from our network. In the past we could not get the VPN tunnel to complete since our layer 3 switch (3750G IP services) has 3 egress points and the egress point that we needed the VPN traffic to go out of is not the default gateway. To solve this we had the air card carrier set switch our air cards to static IP addresses and using route statements for the public IP addresses and access lists we got it to work.
The problem with this is that every new air card we provision needs a static IP address. My question is would policy based routing work in this scenario? The problem has been that the VPN tunnel was not able to complete the negotitaion phase as the traffic came into the switch and was trying to go out the default gateway. The VPN client wont get an internal IP address until the VPN tunnel is created.
I would like to get away from using static IP addresses.
Cisco Switching/Routing :: 1921 Router To Ping The Local Devices Connected To Network
Feb 7, 2013I wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies View RelatedCisco Switching/Routing :: Cat6500 / IPTV Multicast Network Devices High CPU Utilization?
Jan 30, 2013i have a campus network with 2 core Cat6500 and multiple 4500 series distribution switches plus 2960 series access switches,we have deployed IPTV system in the network but currently 50 TVs are working through sattelite stream from streaming server Cisco's DCM 9900.we are planning to add more 300 TVs in the network and i am wondering that when all of them will be deployed then what will happen for switches cpu utilizations when all the Tvs will be running on the same time with different different channels.
View 1 Replies View RelatedCisco Switching/Routing :: 3560 Command Shows Two Devices Connected Through Same Local Port?
Oct 14, 2012show cdp neighbors command shows two devices connected through the same local port?I have a Cisco 3560 that when I issue the "show cdp neighbors" command I get the following results: [code]
the question is why is this showing that Gig0/3 is being used twice to connect to two different devices. I have verified there is no hub connected to this port and in fact Switch3 is not connected to Switch1 at all yet it still shows up in the CDP table.
I have cleared the CDP table on every device at this location and still get the same results.
Cisco Switching/Routing :: List Of Supported External HDDs / NAS Devices For 857w Router?
Mar 19, 2012Where can I find a list of supported external HDDs or NAS devices for a Cisco 857w router?
View 2 Replies View RelatedCisco Switching/Routing :: Nexus 7010 / 5510 - Run OSPF As Layer 3 Routing Protocol Between VPC Peer Links
Mar 25, 2012I have an environment where i have two nexus 7010 switches, along with 2 nexus 5510's. I need to run OSPF as a layer 3 routing protocol between the vpc peer links. I have 1 link being used as a keep alive link, and 3 other links being used as a VpC link.
1) Is it best to configure a separate Vpc VLAN i.e 1010
2) Is it best to configure a vrf context keep-alive
3) just have the management address as the peer ip's.
Cisco :: Energy Wise On LMS 4.1 Discovering End Hosts (1142 / 1131 / 3500)
Sep 25, 2011I have a LMS 4.1 and ive enabled Energywise on several switches.I can see them on energywise devices. they are in the same domain and most of them have IP Phones and Access Points.there are 18 IP Phones registered to a CUCM which is seen by the LMS. and ive done a user tracking and ive seen the phones registered.the access points are LAPs and CAPs (1142, 1131, 3500).
when i try to enable the Energywise End Hosts, i cant see any of the end hosts of the switches.however, when i go on CLI, and see the energwise children, i see them all.
Cisco :: WS-C3750-48PS-S / CiscoWorks Not Discovering Correct Device Types
Jul 27, 2011Whenever I add devices in CiscoWorks and do not manually specify the device type. CiscoWorks find itself wrong device types for it, For example I have found that mostly it classify WS-C3750-48PS-S as below device types; [code]
Also found that WS-C3560-24PS-S discovered as 7600 series routers.
Cisco Switching/Routing :: SG300-10 See All Traffic From All Connected Devices On Any Port / Where To Connect Listening Device
Dec 20, 2012In my LAN environment, I'm using two cisco SG300-10 switches. Both switches are connected by GE10 on both switches, where both ports are set to trunk.Now on all ports 1-9 on both switches, I'm having client computers attached. So I set ports 1-9 to "access" mode.All interfaces on any switch is left in default vlan.
Is it normal that I see all traffic from all connected devices on any port where I connect a listening device?What I'd like to achieve is, that only traffic that is meant for a specific workstation is actually forwarded to this workstation. By now it seems that I get all the traffic from everybody.
Cisco Switching/Routing :: 4948 E HSRP Connect Devices To Standby Unit That Do Not Require Redundancy
Jul 29, 2012If I setup 4948E's in HSRP configuration. And I connect devices to the Standby Unit that do not require redundancy. Will there be any issues passing traffic? I don't believe that standby unit blocks the traffic but wanted to confirm.
View 5 Replies View RelatedCisco Firewall :: 5510 Need To Configure Public IP In Few Devices
Apr 13, 2013I have a few devices that the manufacturer told us we have to set with a public IP (No Natting) We have Internet ->ASA5510-> Switch 3550 with 3 vlans. Up to now we have always use Natting to configure internet access to specific devices. I heard setting up a witch with one VLAN connected to the internet and all other internals is a bad idea. that was the only Idea we had.
View 3 Replies View Related