Cisco Switching/Routing :: How To Enable Ipv6 On ME3600
Mar 18, 2012I use IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 12.2(52)EY2. I not found the command "ipv6" on global and interface configuration.
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: IPv6 RIP Not Being Learned ME3600
May 20, 2013I have a very basic setup here but strange the router is learning RIP routes advertised by the switch but the switch is learning anyRIP routes. Debug shows the switch is sending updates but not receiving any. There is also these error: %MRIB_API-3-ASYNC_ERR: Asynchronous error: failed to register to the MRIB. errno 0xE
I can ping across the gig 0/2 (switch) and GIg 0/2/0 (router)
sw01 - ME 3600
rtr1 - ASR 1001
sw01 config
[Code]......
Cisco Switching/Routing :: ME3600 Does Not Support Rstp
Apr 24, 2013i have some ME-3600x. some of version 12.2 and one of version 15.5. te last one hast same config as all other. but if i check for rstp it sends.i know abount global config commands:
-spanning-tree mode rapid-pvst
-spanning-tree extend system-id
but there is no spanning-tree support. this causes many more problems. so it is important to solve spanning tee at first.is it possible without downgrading this device?
Cisco Switching/Routing :: Ios Version That Supports 4 Byte BGP In Me3600
Jul 10, 2012Which IOS version for me3600 supports 4-byte BGP?
View 1 Replies View RelatedCisco Switching/Routing :: Linked Cat3550 And ME3600 Switches Via Trunk Mode
Mar 27, 2013I faced with a strange behavior of ME3600.For testing purposes I linked Cat3550 and ME3600 switches via trunk mode. All interfaces are in Up state. But I couldn't ping SVI200 of Cat switch from ME3600 and vice versa. [cde]
This scheme perfectly works with another L3 swithes. For example Catalist3750. I know that ME doesn't support VTP, DTP and so on. Also, I've tried latest software.
How To Enable Ipv6 On Pc
Oct 25, 2011how to enable ipv6 on pc?
View 1 Replies View RelatedCisco Routers :: How To Enable Addressing Ipv6 In Router Linksys EA4500
Jun 4, 2012how can enable addressing ipv6 in router linksys EA4500? I need access on the terminal of router?
View 1 Replies View RelatedCisco WAN :: 1941W / IPv6 - Cannot Enable DHCP Client Prefix Delegation
Feb 3, 2011I am struggling turning on DHCP client prefix delegation on a dial 0 interface on at 1941w.
Everything can be configured apart from prefix delegation features. The following command is just are missing.
int dial 0
ipv6 dhcp client pb
I have configured this on a 877 router with no problems. I have tried 15.0(1)M3 and 15.1(3)T.
Linksys Wireless Router :: E4200 - Reset To Factory Defaults / Enable IPV6 Auto
Aug 10, 2011I flashed the firmware and the ipv6 automatic is on disabled and I cannot set it to enabled.the 6rd tunnel option I can change but that has not effect- in fact from what I looked up it seems to be something used by some cable providers.hate to have to reset the router to factory defaults and then reset the network up - just to see if i can get the option to set IPV6 auto to enabled.
View 3 Replies View RelatedCisco Switching/Routing :: IPv6 HSRP Implementation On IOS-XR 4.2.1
Nov 11, 2012I'm looking to try and implement ipv6 HSRP on a series of IOS-XR Routers running 4.2.1 following on from successfully setting up IPv6 HSRP on a few cat6509s on VLAN Interfaces in other parts of the network. I have entered the "router hsrp" configuration menu and gone into the interface in question that I'm looking to setup with IPv6 HSRP. Unfortunately, there version 2 or address-family ipv6 commands are not available.
View 2 Replies View RelatedCisco Switching/Routing :: 2960 Switch Is Supportive To IPv6?
Nov 28, 2012I need to know the 172cisco 1 router support to IPv6 & it support to IPv6 then which IOS is required for it.Also I need to know the cisco 2960 switch is support to IPv6?
View 3 Replies View RelatedCisco Switching/Routing :: Catalyst 2960S IOS 15.0.2 IPv6 Don't Work
Aug 8, 2012Just I have upgraded some 2960S to IOS 15.0(2)SE from a IOS 15.0(1)SE3 and the catalyst don't switch any IPv6 traffic. Don't work any RA and also don't work any unicast IPv6 traffic from any interface. I can see some references to IPv6 changes in the FHS (First Hop Security) in the Release Notes, but no any reference to changes in the configuration.
The switches don't have any IPv6 specific configuration and the sdm is the default templata. Returning to 15.0(1)SE3 everything work ok.
On Catalyst 2960, and 3560E this IOS version seem to work fine with IPv6.
Cisco Switching/Routing :: Does 3750-48ps Have IPv6 Feature Set
Dec 13, 2011I've a 3750-48ps-s running ios version: c3750-advipservicesk9-mz.122-46.SE.bin
I've tried to configure ipv6 on an interface but it does not give me the option.
How do I know if my ios is IPv6 capable?
Cisco Switching/Routing :: 2960 And 4510 IPv6 Support
Mar 2, 2013I have cisco 2960 and Catlyst 4510 switches now we are planning to implement IPV6.
i have the fallowing IOS on my switches.
C2960-lanbasek9-mz.122-50.se5
Cat4500e-entservicesk9-mz.122-54.sg1.bin
The above ios will support for IPV6 or I have to purchase new IOS, which version will support.
Cisco Switching/Routing :: IPv6 Filtering / Policing On 2960 Switch?
Jan 3, 2012Trying to control capacity utilization for guest users connecting to a 2960 switch. No problem for IPv4 users, but IPv6 is giving me fits. What I've found out by trial and error so far implies that there is just enough IPv6 smarts in a WS-C2960-24TT-L running c2960-lanbasek9-mz.150-1.SE to make it impossible to control IPv6 traffic. Blocking IPv6 would be sufficient short term, but MAC filtering on type 0x86DD does not appear to work either. Here are the results I've gotten so far:
What "works":
* Protocol ipv6 or an IPv6 ACL in a class map.
* Using a class map referencing ipv6 protocol or an ipv6 ACL in a policy map.
* IPv4 inbound filters and policing.
* Blocking of IPv4 traffic by a MAC ACL blocking type 0x0800 (IPv4) - note that the docs explicitly state that MAC filters do NOT filter IP traffic, except for on this box on this release they do.
What does not work:
* Applying a policy map referencing a class map referencing protocol ipv6 or an IPv6 ACL to an interface. The service policy is accepted by the parser, but is not inserted into the running configuration.
* "class-default" in a policy map only matches IPv4 traffic, not all other traffic.
* Blocking of IPv6 traffic by a MAC ACL blocking type 0X86DD. No problem applying the access-group to the interface, it just doesn't do anything.
I am aware that this box is not supposed to support IPv6 other than for multicast, but as implemented, this is a hole an abuser could drive a MAC truck through.
My questions:
Is this situation unique to this particular 2960 switch or SW release (I also tried 12.2(58)SE2) or does it afflict all 2960's running LANbase?
Assuming the answers to the first two question are negative, what is the minimum requirement to get working IPv6 policing in an edge switch?
Cisco Switching/Routing :: UDP Port 10000 And IPv6 Ports Listening
Aug 30, 2012I've several production Catalyst switches that are listening on the same IPv4 and IPv6 ports. The problem is I don't want the switches listening on the IPv6 ports.[code] How to shut down these listening ports?I also have a few production switches listening on UDP/10000 and I cannot determine why this port is listening. [code] I've seen where UDP/10000 is Network Data Management Protocol and is related to Storage networks ###, but I've also seen where UDP/10000 is the default port for IPSEC data.I don't believe UDP/10000 is related to either NDMP or IPSEC data, though I could be very wrong.
View 4 Replies View RelatedCisco Switching/Routing :: 6509 Static MAC Address Entry And MS NLB / IPv6
May 23, 2012I have seen other discussions regarding Static MAC address entries on IPv4, but what of IPv6?We have MS NLB solutions and they are working fine. We have Cisco 6509/6504, Version 12.2(33)SXI5
But then we have a new one for a new ActiveDirectory solution, and on those networks we have implemented IPv6.
How is Static MAC address entries and MS NLB solved in IPv6 (i.e arp ip.ip.ip.ip mac.mac.mac ARPA gi1/1). I can't seem to find much examples or documentation on this? Is it replaced with another function?The reason I ask is twofold.
1. I really want to know
2. The NLB cluster seem to drop IPv6 traffic at even intervals, witch seems to correspond with NLB transition.
Cisco Switching/Routing :: IPv6 DHCP Preferred Lifetime (Cat3750X)
Feb 18, 2013There are two kinds of time for assinging IPv6 address from DHCP server.Actaully Catalyst 3750X can do this role. however I am not sure about the difference between Valid lifetime and preferred lifetime.In my understanding the valide lifetime is total lifetime for using the assigned IPv6 address but the prefered lifetime when the assinged IPv6 address is expired at the prefered lifetime then the device may generate extended request or something right?
View 1 Replies View RelatedCisco Switching/Routing :: Which Ios Will Support IPv6 Feature In WS-C3560G-48TS Switch
Feb 18, 2013I am having WS-C3560G-48TS switch with ios(c3560-ipbasek9-mz.122-58.E2.bin) and I am trying to use IPv6 feature in this switch model. More over I've upgraded this switch with many ios but none of them not supporting IPv6 feature. ios which supports IPv6 feature?
View 3 Replies View RelatedCisco Switching/Routing :: Does WS-C3750-48TS-S Supports Private Vlans And IPV6
Nov 3, 2012Need to confirm if WS-C3750-48TS-S supports Private vlans and IPV6?
Also need to know which stack cable like part number i can use for stacking them .
Cisco Switching/Routing :: 3640 What IOS Version Can Support IPv6 RIP In Hardware Limit
Jun 25, 2012I have the cisco 3640 with IOS Version 12.2(46) , and it with DRAM:32M , Flash:8M.What IOS version can support IPv6 RIP in the hardware limit?
View 3 Replies View RelatedCisco Switching/Routing :: Enable Ip Routing On C3550 And Vlans To Talk To Each Other
Mar 27, 2012I have purchased these two switches from ebay as a test lab, I plan to connect them up via a gigastack modulecable and enable ip routing on the c3550 and vlans to talk to each other.
I'm very much a procurve person and really need to get into the cisco switching.I will want to trunklacp between the switches - whats the process is setting that up on cisco switches?
Cisco Switching/Routing :: How To Enable Multicast Routing On 2960s
Mar 23, 2013I need to enable multicast routing on 2960s but the command "ip multicast-routing" isn't available on my release (12.2.(55)).
From which release this command is available?
Cisco Switching/Routing :: 4503E With Sup 7-E And IOSX 3.2 / Enable Routing?
Apr 3, 2013Have a 3750X running at the moment and has about 30 vlans all connected and just use the ip route global config command to enable routing. Plan is to switch out to the 4503E, with IPBase license. When ever I issue the same command, and do a show run its not there. I get no error when I issue the command either. And yes I have rebooted. Do I need to use RIP or OSPF routing? When I do a show ip route the screen looks the same with all the codes, though gateway of last resort isn't set even though I do have ip route 0.0.0.0 0.0.0.0 a.b.c.d in the config. Or is ip routing just enabled by default?
View 6 Replies View RelatedCisco Switching/Routing :: Enable L3 Routing On C2960S
Apr 19, 2013I have been trying to enable L3 intervlan routing on C2960S Switch with ip routing command and that was the output from the Switch: [code]
View 6 Replies View RelatedCisco Switching/Routing :: How To Enable Ssh On 4507
Feb 14, 2012How do I enable SSH on 4507. I do not see "ip ssh ..." commands config#ip ssh (I do not see "ip ssh " commnd)
Do i need to enable something else?
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
Cisco Switching/Routing :: 3650x - Way To Enable PBR?
Jun 14, 2011I am trying to enable policy based routing on a new 3560x switch.The device has the following code c3560e-universalk9-mz.122-55.SE1.bin and the IPSERVICES license
I can create the route map in global config mode but when I try to enable pbr under the required interface the commands are not there.therefore I am typing ip policy route-map "name" the word policy does not show up in the interface config mode. I have also change the sdm profile to routing this has not made a difference.
[code]...
Cisco Switching/Routing :: How To Enable NetFlow On 3750
Mar 17, 2013I have a 370 with C3KX-NM-10G module & i want to enable NetFlow on it did the specified configs
Step 1 Flexible NetFlow Flow Recordsflow record miketestmatch datalink source-vlan-idmatch datalink dot1q prioritymatch datalink mac source-addressmatch datalink mac destination-addressmatch ipv4 versionmatch ipv4 tosmatch ipv4 ttlmatch ipv4 protocolmatch ipv4 source addressmatch ipv4 destination addressmatch transport source-portmatch transport destination-portmatch interface input physical snmpcollect interface output snmpcollect counter flowscollect counter bytescollect counter packetscollect timestamp sys-uptime firstcollect timestamp sys-uptime last flow record miketestegressmatch datalink destination-vlan-id match datalink dot1q priority match datalink mac source-address match datalink mac destination-address match ipv4 version match ipv4 tos match ipv4 ttl match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port match transport destination-port match interface output physical snmp collect interface input snmp collect counter flows collect counter bytes collect counter packets collect timestamp sys-uptime first collect timestamp sys-uptime last Step 2 Flexible NetFlow Flow ExporterFlow exporter export-to-samplicatorDestination 10.1.1.8source Vlan1Transport udp 2055option interface-table timeout 60 Step 3 Flexible NetFlow Flow Monitors# Tie the Flow Monitor to the Flow Recordflow monitor mikektestrecord miketestexporter export-to-samplicatorcache timeout active 60flow monitor mikektestegressrecord miketestegressexporter export-to-samplicatorcache timeout active 60
& Applied it to g1/1/1 but without any luck , if netflow works on the
TenGigabitEthernet1/1/1 &
TenGigabitEthernet1/1/2
Only i have four switches stacked and nothing plugged to the
C3KX-NM-10G module
Cisco Switching/Routing :: 3750 - How To Enable SFP Port
Nov 7, 2011I am trying to configure a 3750 48 port switch and having trouble with getting it to see the sfp. I just want to set up the router with a pretty basic set up since I am using it for a ping test between 2 buildings, via fiber. How I can enable the sfp port?
View 3 Replies View RelatedCisco Switching/Routing :: Enable Netflow Fo 4506
May 8, 2013I have 4506 with below sup, my requirement is to enable netfolw , but as i came to know that it is not supported in this sup, is there any additional option which can be explored to get the netflow working without replacing sup.
Card Type Model
-------------------------------------------------------------+-----------------------
Sup 6-E 10GE (X2), 1000BaseX (SFP) WS-X45-SUP6-E
Cisco Switching/Routing :: How To Enable SSH In 2950 Model
Oct 26, 2009i am having 2950 switch. Now i login through telnet but as per the company standard i have to login through ssh. Is there any possible to enable the SSH in 2950. Any IOS supporting this operation.
flash:/c2950-i6q4l2-mz.121-19.EA1c.bin
Cisco Switching/Routing :: 2650 - Getting Enable Mode On Router?
Jan 14, 2012On my 2650 Router it just has only Telnet password.It has no enable mode password set.After reboot it is goes to prompt mode BB.I am unable to go to enable mode .how can i go back to enable mode on this router?
View 13 Replies View RelatedCisco Switching/Routing :: 2960g / How To Enable Multicast To Work
Jun 7, 2012I have a 2960G that I keep on the bench as a work switch. I assigned an IP address to it. The techs have had trouble imaging workstations using GHOST. Do any config changes need to be made to enable multicast to work? Everything is in VLAN1 at this point and the GHOST server is also the DHCP server.
View 1 Replies View Related