Cisco Routers :: How To Enable Addressing Ipv6 In Router Linksys EA4500
Jun 4, 2012how can enable addressing ipv6 in router linksys EA4500? I need access on the terminal of router?
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: EA4500 - Computer Would Not Get Valid IPv6 On LAN
Apr 18, 2013Lets get this straight, right off! If I plugged my computer directly to my Comcast Modem, IPv6 works fine on the { url } So I do not think any of this problem is related to my computer
I bought a EA4500 Router so I would be ready for IPv6, and also wanted N as well as the storage USB port. When I got the router, it came I guess with the original release firmware. It looked "Classic", but the box said Smart. I did the firmware upgrade. I could not get a IPv6 from Comcast. IPv4 worked fine.
I then changed to the latest "Classic: firmware, and all started to work. So I decided to try Smart again. Same thing, no IPv6 from Comcast. After being on chat for I think close to 2 hours today and getting no where, I did a reset to start at scratch again. I then got a IPv6 from Comcast. Many moons ago, it was a real hassle to switch devices hooked to a cable modem. At least here you had to power cycle the modem, so I have always cloned my wired Desktop MAC. So when I put it back in, I lost IPv6 from Comcast. Turned off MAC cloning, and I got the IPv6 again. So it looks like there is a bug in the Smart Firmware and MAC cloning since it worked OK with Classic firmware. OK, I could live with no cloning since the issues of yesteryear don't seem to be there in getting a IP from the cable modem.
Then for what ever reason, my computer would not get a valid IPv6 on the LAN from the router. I got some IP, but no Gateway. I tried everything I could think off. And again, plugging the computer directly to the cable modem, IPv6 worked fine. So something is just not right with this router as far as I am concerned.
Also, it seems like navigating through the menus on a local connection (192.168.1.1), I constantly got a message to wait popping up on the screen, for many seconds. If I had no Internet connection it would take forever on some things.
I have spent many hours on this, and am just giving up and going to look at another brand product. I don't need or want the "Smart" functions anyway.
Linksys Wireless Router :: EA4500 Loses IPv4 And IPv6 Information?
Dec 21, 2012No changes made but router will lose all information for IPv connectivity. I have paid twice to support to fix this issue and it still occurs every few months. I tried rebooting router, and doing an IP Release/ Renew and router does not get IP address.
View 4 Replies View RelatedLinksys Wireless Router :: Setting Up EA4500 SixXS IPV6 Tunnel
Sep 18, 2012Need a guide to setting the Ipv6 Tunnel from SixXS On the cisco connect cloud?
View 2 Replies View RelatedLinksys Wireless Router :: EA4500 Prefix Delegation For Establishing An IPv6 Connection
Aug 30, 2012My ISP (OTEnet, Greece) offers IPv6 connectivity in the form of dual-stack IPv4/IPv6 with the requirement that the router supports DHCPv6 Prefix Delegation for establishing an IPv6 connection.Using other routers (Cisco 887W, DrayTek Vigor2130n), I have established an IPv4/IPv6 connection but I am unable to do so with the EA4500. As a matter of fact, when I have the "IPv6 - Automatic" option enabled the router not only cannot obtain an IPv6 prefix from the ISP but it gets stuck in the connection attempt and never obtains an IPv4 or an IPv6 address. I have to disable the IPv6 option in order to simply establish an IPv4-only connection without problems.So, my questions are:
1. Does the latest (2.1.38.38880) firmware support dual-stack IPv6 and DHCPv6 Prefix Delegation?
2. If the router cannot negotiate an IPv6 connection why is it not establishing an IPv4 connection only but gets stuck in the process?
Linksys Wireless Router :: EA4500 - Translate Ipv4 Address And Port To Ipv6?
Nov 9, 2012I have a virtual machine running in my desktop which connected on the gigabit lan port on EA4500 with firmware 2.0.37.What I want to be able to do forward a port that came from an external ipv4 address to the ipv6 address and a different port to my virtual machine (to remote desktop port 3389).The reason I want to convert the traffic to ipv6 is because virtual machine is running vpn and is not reacheable through ipv4 (unless bunch of routes are setup and things get complicated etc). I verified my phsical server and virtual server get both ipv6 ip addresses through ipv6 tunnel from comcast. Without tunneling I could not get ipv6 setup using automatic mode with comcast, it simply did not work for some reason.
View 1 Replies View RelatedLinksys Wireless Router :: Enable WDS On New EA4500?
May 31, 2012How do I enable WDS on my new EA4500 ?
View 3 Replies View RelatedLinksys Wireless Router :: E4200 - Reset To Factory Defaults / Enable IPV6 Auto
Aug 10, 2011I flashed the firmware and the ipv6 automatic is on disabled and I cannot set it to enabled.the 6rd tunnel option I can change but that has not effect- in fact from what I looked up it seems to be something used by some cable providers.hate to have to reset the router to factory defaults and then reset the network up - just to see if i can get the option to set IPV6 auto to enabled.
View 3 Replies View RelatedLinksys Wireless Router :: EA4500 Connect Cloud SSID Option Enable?
Sep 17, 2012Using CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies View RelatedLinksys Wireless Router :: EA4500 / E2500 - Administrate Both Routers From Same PC
Jan 10, 2013Yesterday I installed a new Linksys EA4500 wireless router at home. Everything went OK. The router replaced a Linksys E2500, which I will use at the cabin.Is it possible to administrate both routers from the software installed with EA4500? I want to administrate both routers from the same PC.
View 1 Replies View RelatedHow To Enable Ipv6 On Pc
Oct 25, 2011how to enable ipv6 on pc?
View 1 Replies View RelatedCisco Routers :: RVS4000 Has No DHCP Addressing
Oct 25, 2011I have a customer using a RVS4000, DHCP is enabled; the unit is set as gateway but there are no DHCP address assingments coming from the router.
View 2 Replies View RelatedCisco Routers :: RV082 IP Addressing Class B
May 27, 2013I read in the RV082 user manual can I configure a Ip address class C in the LAN interfaces.I need to know if the router support a class B addressing.
View 1 Replies View RelatedCisco Switching/Routing :: How To Enable Ipv6 On ME3600
Mar 18, 2012I use IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 12.2(52)EY2. I not found the command "ipv6" on global and interface configuration.
View 2 Replies View RelatedCisco WAN :: 1941W / IPv6 - Cannot Enable DHCP Client Prefix Delegation
Feb 3, 2011I am struggling turning on DHCP client prefix delegation on a dial 0 interface on at 1941w.
Everything can be configured apart from prefix delegation features. The following command is just are missing.
int dial 0
ipv6 dhcp client pb
I have configured this on a 877 router with no problems. I have tried 15.0(1)M3 and 15.1(3)T.
Cisco Routers :: WAN To LAN Throughput Of RV042 Router With QoS And SPI Enable?
Feb 13, 2012What is the WAN to LAN Throughput of RV042 router with QoS and SPI enable?
Will the RV042 router able to support a 60Mbps down 3Mbps up Internet connection with QoS enable and SPI enable without slowing down the connection?
Linksys Wireless Router :: Get IPV6 Connectivity Using Rr?
Mar 1, 2013How can I get IPV6 connectivity using rr. Does it has to be automatic or manual, Is there anyone with RR getting IPV6?
View 4 Replies View RelatedLinksys Wireless Router :: Set IPv6 DNS Server On E4200v1?
Jul 12, 2012I have an e4200 V1 with firmeare V 1.0.04 For my IPv4 configuration I use opendns.com for my DNS provider.When I enable IPv6, I get my ISPs DNS server rather than the one I have configured on the IPv4 page. It works, but it eliminates all filtering and statistics that I am able to do with opendns.com.Open DNS does provide two IPv6 DNS servers, but I don't seem to be able to find where to set them in my e4200. I want it set network wide.Can I set my IPv6 DNS provider anywhere in the e4200v1 with V 1.0.04?
View 3 Replies View RelatedLinksys Wireless Router :: E3000 Does Not Have IPv6 Support
Feb 23, 2011I know that the E3000 does not have IPv6 support. I wanted to know if it will get a firmware update to support it?
View 9 Replies View RelatedLinksys Wireless Router :: IPv6 Setup For E4200?
Jun 11, 2012Our internet provider has no intention of providing a IPv6 DNS so I have a crippled at best service. We live in an area where our only option is through satellite service, so changing providers in not in the cards, yet.
If I "Disable" the DHCP Sever, the setup menu provides a method for me to force feed up to three Static DNS addresses, all with IPv4 addresses.
There are several locations that provide "free" DNS service, but how does one verify the security of such sites? Does Cisco keep track of the status of this kind of service or am I on my own? Cisco seems to endorse two DDNS services, but for home use, the extra charges seem otherwise unnecessary, and do not yet address the IPv6 question.
The first few that I have investigated that do provide IPv6 service also provide their addresses in IPv6 format. The E4200 menu does not seem to allow me to do that.
Am I going to be forced to live with crippled IPv6? I have already discovered a software product that has failed since changing routers, but works if I take my laptop to a particular WiFi location.
Linksys Wireless Router :: Disable IPv6 For Parental Controls?
Jan 14, 2013So I've realized that my parental controls were being ignored by the computers, at first I figured my son had found a work around to by-pass. But reading through the forums today, I've found that IPv6 being enabled might be the cause of my issue. So I'm currently sitting at work and connected to my router remotely, but for the life of me, can't see where to disable this option. Using the Smart Wi-Fi interface, closest I can get is "Connectivity, Internet Settings, IPv6 but everything is grayed out and no option to edit this.
View 9 Replies View RelatedLinksys Wireless Router :: EA3500 IPV6 Tunnel Resets To Automatic
Jan 27, 2013I have to go back into settings and deactivate the IPV6 tunnel daily to keep access to youtube. My provider does not support IPV6. Saving changes has no effectIs there a way to ensure that the IPV6 tunnel remains deactivated?I have firmware version 1.0.30 build 126544 2011-12-24. Firmware update function says I got the latest version.
View 5 Replies View RelatedLinksys Wireless Router :: Firmware Upgrade For WRT120N To Support IPV6?
Jul 22, 2010IPV4 IP addresses will be running out in less than a year and I wanted to know, will there be a firmware update for WRT120N to support IPV6?
Also, if I have to buy another router to support IPV6, I'm going to buy a D-Link. It's nothing personal, I just find it absolutely idiotic that a router that supports wireless-N doesn't support IPV6. You have to ask your self, how does the standard IPV6 spec thats a few years old not make it to the final product of a router, but a non-standard wireless-N spec implementation somehow got the O.K....?
Linksys Wireless Router :: E3200 Manual Configure Ipv6 Settings?
Jul 9, 2012Do you know when will be possible to manual configure ipv6 settings? I have all parameters from my ISP but the settings on the router are only automatic and 6rd. Is it possible to enable this in future firmwares?
View 1 Replies View RelatedLinksys Wireless Router :: EA3500 Ethernet Ports Do Not Support Ipv6?
May 29, 2012Region : Ireland
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I have my router updated with the latest firmware and I'm pretty sure all the settings are correct but I'm only getting a max transfer rate of 144Mbps. I know this because I use InSSIDer 3 to analyse my wifi network etc. I stream movies over my network and while DVD quality movies play fine, HD movies tend to freeze and buffer a lot. I have the router's channel width set to 40Mhz, so I know that's not the problem. Strangely, I also use a Netgear wifi extender with the MR3420 and it's max rate is 300Mbps.
Linksys Wireless Router :: E1200 PPPoE And IPv6 Not Working Fine
Feb 7, 2013Have a v2 E1200. Connect with PPPoE to ISP. IPv4 works fine. With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP. This /64 would show up under 'status' / 'local network'. Although it did not seem to advertise this space to PC's on my network so I was unable to use it. I updated firmware to 2.0.04. Now it does not even pick up the IPv6 /64 at all.
Anyone have PPPoE and IPv6 working? Anywhere I can download 2.0.01 to try it again?
Is there a model of router that actually works with IPv6?
Linksys Wireless Router :: E4200v2 Cannot Access IPv6 Internet Or Sites?
Feb 5, 2012I just upgraded my old WRT54G to a E4200v2 with firmware 2.0.36.126507. I installed it using the Cisco Connect CD. At first it seemed OK, but then I noted that I cannot open (or takes forever) many websites, in particular those requiring Adobe Flash Player to view. In addition, it appears that access IPv6 Internet or sites is impossible, even though IPv6 is enabled in the GUI. Is there anything I am missing in the configuration/set up of the router?
View 9 Replies View RelatedLinksys Wireless Router :: DVR8-4000 IPv6 Static Address
Apr 10, 2013I have a Swann Communication security camera system with their DVR8-4000 hooked to an IPv4 router, connected to the Internet using the new HughesNet Gen4 service. The Swann DVR wired to my router requires a static IP address. HughesNet Gen4 is implemented with IPv6 and I am told that it does not accommodate an IPv4 type static address.
I have discussed the issue with both company’s technical support. HughesNet Gen4 reps recognize the issue and may support static addressing in the future, but not now. Swann reps will not modify their implementation because of the relatively small Gen4 market. The Swann rep suggested that replacing my IPv4 router with an IPv6 router might resolve the “static IP address” issue.I am looking at several Linksys IPv6 routers including the EA4500 SMART WiFi Wireless Router N900, but know too little about IPv4, IPv6 and router/static addressing to proceed unassisted.
1) can I implement a static address with an Linksys IPv6 router cdonnected to Gen4?
2) Which Linksys routers offer IPv6 support?
3) How does one go about setting an IPv6 static address using HughesNet Gen4 on a Linksys router?
Linksys Wireless Router :: E4200 IPv6 Causes Win7 DHCP Client Crash?
Jun 9, 2012When I enable IPv6 on my E4200, the Windows 7 DHCP client crashes. It also seems to crash the audio service, the event logger and a few other windows services.
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Cannot Ping Addresses Of IPv6 Tunnel Ends
Nov 21, 2011i have my Cisco E4200 set up with a 6rd tunnel. the tunnel seems to work fine for the most part. i can ping ipv6.google.com and get a response.however, i cannot ping the addresses of the IPv6 Tunnel ends from within my network. If i run a ping from outside the network, i can ping the IPv6 address of the server end, however, i cannot ping the E4200's end of the tunnel. is there a specific option that needs to be set? i have allowed ping so that my IPv4 address is pingable, am i missing something for IPv6?
View 7 Replies View RelatedLinksys Wireless Router :: EA3500 Disabled And Enabled IPV6 On Network Card
Apr 9, 2013I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
Linksys Wireless Router :: EA2700 IPv6 Dual Stack Doesn't Assign IP Addresses
Feb 5, 2013My ISP recently started offering dual stack IPv6. After changing IPv6 from manual tunnel to automatic, none of my devices get an IPv6 address from the ISP. In the troubleshooting page, IPv6 address is also empty. I tried resetting the router but had no difference. We have another router (ASUS RT-53N) and it works fine.The ISP is using PPPoE for IPv4. In RT-53N I choose "IPv6 with DHCP-PD" and Interface "PPP". There're no such options in EA2700 though.
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Adds Certification For DLNA / IPv6 / Gold Log And UPnP
Sep 28, 2011New firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies View Related