Cisco Switching/Routing :: Stack Cables For 3750e?

Nov 13, 2011

Can I get a stack cable longer then 3m?

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: Can Stack 3750G-12S-S Switch With 3750E-24TD-S

Apr 22, 2012

Can we stack a 3750G-12S-S switch with a 3750-E-24TD-S switch?

View 4 Replies View Related

Cisco Switching/Routing :: Cross-Stack 10-Gigabit EtherChannel On 3750E / 3750-X

Jan 28, 2012

According to the following Cisco webpage, cross-stack 10-Gigabit EtherChannel is possible on the 3750 with up to two 10-Gigabit modules, using LACP: url...However, the webpage doesn't confirm if this functionality is restricted to a particular 3750 model, such as 3750E, or if it applies to all models. It also doesn't specify any particular IOS feature set. I've tried Cisco Software Advisor but it doesn't list this feature on either the 3750E or 3750-X. This is possible on the 2960-S switches (i.e. cross-stack 10gig EtherChannel)?

View 23 Replies View Related

Cisco Switching/Routing :: C3750X Stack Power Cables End Colors

Oct 26, 2011

Does the color strips on C3750X stack power cables mean anything, I mean the green and yellow ones. On all Cisco pictures the green one seems to be plugged in the upper ports. I asked local Cisco representative, but he seems not to be sure. We tried to try different scenarios, and it looks like it does not matter what cable end we use. We do not have any external power supply, only interconnecting C3750Xs.

View 1 Replies View Related

Cisco Switching/Routing :: 3750 Connect Stack Cables To New Switch

Dec 11, 2011

At a customer i've tried to add a new 3750 switch til a running stack.I used the following proccess:
 
1. connect stack cables to the new switch

2. bootup new switch.
 
Normally the new switch will become a member of the stack, but here, the switch says its the stack master. I can see that the stack port from the old switches connecting the new is up.The only way i could make it work was to provisioning the new switch as switch nr x, save, power off and then connect it and boot it up.The IOS i the same on all switches.

View 2 Replies View Related

Cisco Switching/Routing :: 3750E-24PD-S Stack Member Fan Failed Syslog Message

Aug 6, 2012

I have a pair of 3750E-24PD-S stacked together, it seems after stacked together the stacked switch always flood the console screen with these messages which are not true: [code] Switch-2 is the stack member, Switch-1 is the stack master. The RPS fan failed refers to RPS2300 or the internal power supply of 3750E? Even when I turned on the RPS2300 the stacked switch still display the messages. Also I have two RPS2300 serving stack master and stack member respectively both RPS2300 were switched off why the messages only refer to Switch-2 and not Switch-1? [code]

View 1 Replies View Related

Cisco WAN :: Stack Port At 3750E

Sep 16, 2012

i m using a stack in between below mentioned switch but we are facing a problem at 3750E on port is down. 
 
Switch Ports Model              SW Version            SW Image               
------ ----- -----              ----------            ----------             
     1 28    WS-C3750G-24TS-1U  12.2(50)SE2           C3750-IPBASEK9-M       
     2 28    WS-C3750G-24TS-1U  12.2(50)SE5           C3750-IPBASE-M         
*    3 30    WS-C3750E-24TD     12.2(50)SE2           C3750E-UNIVERSALK9-M
[Code]...

Is there any IOS or any H/W issue???

View 8 Replies View Related

Cisco Switching/Routing :: How To Use BGP On 3750E

Dec 8, 2012

I need to use cisco 3750E switch on core. I want to know whether BGP is supported on this model or not?Currently i have c3750e-universalk9-mz.150-2.SE/c3750e-universalk9-mz.150-2.SE.bin" preinstalled. and i checked BGP is not supported on this IOS image.

View 7 Replies View Related

Cisco Switching/Routing :: CAB-STACK-50CM Bent Stack Cable

Feb 27, 2013

Is there a stacking cable that is "bent"?Im using this cable:"CAB-STACK-50CM", "Cisco StackWise 50CM Stacking Cable".But it takes up to much room in the back of the switch, is there such a thing as "bent" stacking cable.

View 1 Replies View Related

Cisco Switching/Routing :: Configuring Stack-power On A 3750X Stack?

Oct 31, 2012

I have 3 switches in my 3750 X stack. I am getting the following error in the logs:  %PLATFORM_STACKPOWER-4-PRIO_CONFLICT: Switch 1's power stack has conflicting power priorities.  Not sure what I should do next. Below is my Stack-power configuration:
 
Power stack name: Powerstack-1    Stack mode: Power sharing    Stack topology: Ring    Switch 1:        Power budget: 735        Low port priority value: 20        High port priority value: 10        Switch priority value: 2        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: c464.1308.7900        Neighbor on port 2: e8b7.4827.e680
    Switch 3:        Power budget: 729        Low port priority value: 22        High port priority value: 13        Switch priority value: 4        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: 2894.0fd9.9f00        Neighbor on port 2: 2894.0fd8.e200
    Switch 2:        Power budget: 690        Low port priority value: 21        High port priority value: 12        Switch priority value: 3        Port 1 status: Connected        Port 2 status: Connected        Neighbor on port 1: 2894.0fd8.e200        Neighbor on port 2: c464.1308.7900
 
Each switch has its own 715W power supply in it and all check out OK.

View 3 Replies View Related

Cisco Switching/Routing :: 2960G Configuring Ether-channel On Stack-wise Stack

Sep 24, 2012

A site that i am responsible for has the following equipment installed: 

2 x 3750G Switches configured as a stack using Stackwise - Collapsed Core/Distribution Layer
5 x 2960G Switches as Access Layer switches
 
WAN connections into the Core/Distribution Layer are all Gigabit Ethernet over Fibre.This is a dedicated CCTV Network with 50 Cameras all streaming video into the Core (decoders connected to access switches)Each 2960G has 2 links to the Core/Distribution 3750G Switches, 1 to each switch - Gigabit.I'm running rapid-pvst on all switches, so spanning tree is blocking one of the ports and effectively halving the 2 gig bandwidth. Next year our customer is going to add in a further 50 - 60 cameras.After monitoring the current loading on the ports in use, we have suggested to the customer that the 2 connections to each should be Ether-channeled together. [code]
 
First interface takes commands no problem, keep getting the message that etherchannel cannot be configured across different switches in a stack when i try to put the second interface commands on.

View 8 Replies View Related

Cisco Switching/Routing :: 3750E / Applying ACLs When Routing Between SVI And Routed Interface?

Mar 12, 2013

Quick question here. Using 3750E series switches with multiple VLANS configured. These switches serve as our 'core'. I have SVIs configured for the different VLANs and add inbound ACLs in each of the SVIs to control traffic between VLANS. This switch also terminates a P2P Ethernet link which connects to our Colo facility. The port used for this is configured as an L3 port. I noticed today that I was able to send traffic across this L3 link that I thought should have been blocked by an ACL I had in place but it wasn't. So the traffic flowed from a port in say VLAN 20 across this L3 link (assigned with an IP address). Would this traffic flow not cause traffic to be checked against an ACL applied in the inbound direction on the SVI of VLAN 20 (int vlan 20)? Traffic does get checked when routing between SVIs. Why would it not get checked when routing between SVI and L3 interface?

View 2 Replies View Related

Cisco Switching/Routing :: Upgrading 3750E From 12.2(58) To 15.0(2)

Jan 31, 2013

I am in the process of upgrading our network switches and wondering if the .lic file will work with the new software or if I have to rehost for the move to 15.0.  Its a remote site and I would like to get some solid info before I pull the trigger.
  
Also which IOS should I be upgrading to?
 
c3750e-ipbasek9-mz.150-2.SE.bin
or
c3750e-universalk9-mz.150-2.SE.bin

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: Stacking 3750G And The 3750E?

Nov 20, 2012

have 2 3750's one is an 3750E the other one is a G... Since they are 2 different versions Do I need to correct ios for each for example my 3750E switch i would have
 
IP BASE
 c3750e-ipbasek9-mz.122-53.SE2.bin        and for my 3750G switch should i use
  
IP BASE
 
c3750-ipbasek9-mz.122-53.SE2.bin
  
Which would be 2 separate images

View 4 Replies View Related

Cisco Switching/Routing :: Giving Out Discard Error On 3750E

Apr 4, 2011

We're seeing "OutDiscard" error on a LAN switch connected to newly migrated Cisco IP phones. All the other error counters are clean except for the OutDiscard. (please see attached "show int count err" output.) [URL].

According to the link above, the common cause of such discards can be to free up buffer space.(Am I seeing a switch buffer issue?) How to identify/resolve the cause of the OutDiscard.The switch is 3750-E running c3750e-universalk9-mz.122-44.SE6.bin

View 1 Replies View Related

Cisco Switching/Routing :: 3750E RACL Slow To Load

Apr 16, 2012

I am seeing on my 3750E series switches (WS-C3750E-48TD). I have multiple VLANs configured on here, one which is used as a 'workstation' VLAN. I have an inbound ACL applied to the VLAN interface *(int vlan 50 to be exact). This list is admittedly long at roughly 6000 ACE's. Now I just recently installed these switches as they replaced some 4507R switches which we moved to our new centralized DC. Here is the issue I am having. This same ACL was applied to the same VLAN interface on the 4507s when they were doing the work of the 3750s. What I used to be able to do was actually edit the ACL by removing it with no ip access-list extended WS-In and then followed up by the ip access-list extended WS-In ......and the lines I wanted in the ACL. I know I could use the line numbers to edit the ACL but this worked OK for me. When I would do this on the 4507R, the ACL was still applied to the interface but traffic never seemed affected by the removal and re-adding of the ACL. I did this by copying and pasting the ACL into a terminal window. It seemed as though on the 4507 the ACL was not compiled until the entire thing was in loaded in and therefore traffic was not processed by the ACL until the load was done

View 3 Replies View Related

Cisco Switching/Routing :: 3750E NetFlow Commands Available On Switch

Oct 30, 2011

I have a 3750E stackable swtch and I need to configure neflow on it.  Are there any IOS versions that support netflow on the 3750E?  Is there any possible to configure netflow on a 3750E?  I do not see any netflow commands available on the switch?

View 2 Replies View Related

Cisco Switching/Routing :: Difference Between Catalyst 3750e 48 And SF300-48p?

Apr 11, 2012

what is difference between Cisco catalyst 3750e 48 and SF300-48p.

View 3 Replies View Related

Cisco Switching/Routing :: Stacking Switch 3750E And 3750X?

Oct 3, 2012

can I make the stacking of these two switches WS-C3750E-48PD-SF and WS-C3750X-48PF-L. Both have universal IOS.

View 11 Replies View Related

Cisco Switching/Routing :: Timeout For Mac Address Table In 3750E

Dec 6, 2011

I have 3750E swiches with IOS v. 12.2(55)SE3. Couple servers connect to ths switch, after ping of IP this servers I can see mac addresses in mac address table.
 
For instance:
sw1#show mac address-table vlan 20
          Mac Address Table
-------------------------------------------
 
Vlan    Mac Address       Type        Ports(code)
----    -----------       --------    -----
 
When ip generate traffic to this server this mac address appear in table again on shot time (less than 10 seconds).

View 4 Replies View Related

Cisco Switching/Routing :: 3750E - Monitoring TCAM Usage

Nov 30, 2011

I had a lot of problems with TCAM table in the past and made changes in SDM ended whit that. But now want to be proactive and anticipate the problems in my TCAM table.
 
If the my template is "default desktop" they support a number of indirect IPv4 routes of 2k. I wanna know automatically by my management tools if this number reaches 1.9k.
 
That way I can take corrective actions before the problems starts on my network.

View 5 Replies View Related

Cisco Switching/Routing :: 3750e InterVLan With RVS4000 Gateway

Jan 4, 2012

I have a RVS4000 connected to my cable modem which I use as my gateway, the IP address of the RVS is 192.168.3.254
 
I have a 2811 with 3 subinterfaces of which I can ping all of them from my PC which at the minute is in VLAN 1, the only network that can connect to the outside world is VLAN 1, how can I enable the other 2 vlans to connect to the internet?
 
My set-up details are
 
Router
 
interface FastEthernet0/0.1
description *** Data Network***
encapsulation dot1Q 1 native

[Code]....

View 1 Replies View Related

Cisco Switching/Routing :: Can't (write Mem) After Adding 3rd 3750E Switch

Mar 10, 2008

After I added the 3rd 3750E to my stack on Sunday I can no longer save my configs with  'copy run start' or 'write mem':
 
#copy running-config startup-config
Destination filename [startup-config]?
Building configuration... 
nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]

[code]....
 
my flash seems to have plenty of space:

57409536 bytes total (24203776 bytes free)

View 4 Replies View Related

Cisco Switching/Routing :: 3750E ACL Marked Traffic Are Not In Correct Queue

Apr 22, 2012

We tested a QoS in a Cisco 3750E, IOS: 12.2(58)SE2.Voice traffice in the correct Q without any problem, but all the others traffic the Defualt Q (0), tried to capture the traffic and tcp/udp port are correct.Any thing wrong with my ACL or DSCP - CoS?? ( that ACL works fin on 4500 and 6500) [code]

View 3 Replies View Related

Cisco Switching/Routing :: 3750E Debug Causes Switch To Crash And Reload

May 3, 2013

I am not able to find the exact bug for Cisco 3750E stack - Debug Exception (Could be NULL pointer dereference) Exception (0x2000) error. Closest i can find is CSCsa72400 which only affects ver 12.2(20)SE4.All the stacks (3 switches) are running 12.2(50)SE3, It appears that the switch 1 crashed and reloaded. My hunch is its software but i cant find any related bugs. It could be hardware issue as well ?

View 4 Replies View Related

Cisco Switching/Routing :: 3750E / Traffic Prioritization Involving VLANs?

May 30, 2012

I have a device which will be sending voice and data packets and is able to mark the packets with DSCP values.   Voice, 18 and Data 42.If this was a straight through network, I'd be clear on how to handle this, but.....I will be putting this traffic into a VLAN to isolate it from some other traffic on the network.  What is the best way to prioritize this traffic inside the VLAN?  Will the Cisco switch look at and respect the DSCP values inside the VLAN and prioritize accordingly inside the VLAN?  Or, do I need to do some sort of DSCP to 802.1p mapping? Another option I would be fine with would be mapping the DSCP values for voice and data to two different VLANs and then giving the voice VLAN priority over the data VLAN .... I'm using 3750E switches.

View 7 Replies View Related

Cisco Switching/Routing :: 3750E-1 Meaning Of Backup On HSRP Statas

Oct 25, 2011

What is meaning backup on HSRP statas?There are 5 vlans.The other four vlans aren't backup status.Only one of five vlans display messeages. When I reload Catalyst3750E-1,debug log. [code]

View 6 Replies View Related

Cisco Switching/Routing :: 3750E - 10Gbe / Slow Read Speed From NAS?

Nov 7, 2012

9x3750E stacked switch (WS-C3750E-48PD-SF0) (15.0(1)SE2 
C3750E-UNIVERSALK9-M)
2x10Gbe uplinks from EMC NAS
 
At a basic level, we have found that the 10Gbe uplinks have slow read performance with or without a port-channel configured (2-3 minutes for a 700MB file to desktop from the NAS) We switched back to testing a 1Gbe and the read speed is normal. Another anomaly is Win7 / 2008 machines read speed is fine from the NAS  while the 10Gbe uplinks are in production?!
 
Write speed is great on 10Gbe. Only read speed is affected!! the switch is not reporting anything abnormal. We looked at SMB/SMB2 as another possible cause...
 
mls qos is enabled on the switch but not sure if this is affecting performance.
 
Is the ANY config that I need to carry out on the interfaces to get the read speed working as it should for both Win7 and WinXP. (MTU is 1500 throughout the enterprise, NAS included).

View 1 Replies View Related

Cisco Switching/Routing :: 3750E - Status Lights On Left Lit Up But No Ports On

Oct 16, 2011

I have installed and configured 2 new WS-3750E-24TD in the last 30 days, that have software version 12.5(50)SE2-universalk9, on our flat Development LAN  (currently 7 existing WS-3750E-24TD with 12.5(35)SE2-universal)The new switches have shutdown, 1 has shutdown twice and I just had the other one shutdown on the weekend, all the status lights on the left are lit up but no port lights are on, I am not able to console in to the switch all I can do is cycle power. I am planning on upgrading all switches to the latest software release  universalk9-mz.150-1SE
 
could this problem be a version incompatibillity between the switches?

View 8 Replies View Related

Cisco Switching/Routing :: Finisar 10Gb/s X2 Modules In 3750E IOS15.0?

Jun 13, 2012

We have many 3750E's and need to use Finisar X2 modules FTLX8541E2. After 15.0(1) IOS upgrade the 3750's now recognize the Cisco part X2-10GB-LRM's, but will not recognize our Finisar modules.

View 1 Replies View Related

Cisco Switching/Routing :: 3750E - Sequestering Traffic On A Router-enabled Port

Nov 20, 2011

Is there a way to use the "no switchport command to enable routing on a port and yet sequester it from traffic on other vlans within the switch?
 
The switch in question is a 3750E

View 2 Replies View Related

Cisco Switching/Routing :: Cat 3750E Failed To Send HRPC Non Blocking Message

Mar 23, 2012

I have a stack of Catalyst 3750E switches.

IOS image :c3750e-ipbasek9-mz.122-55.SE3.bin

I have been seeing multiple occurance of the below message in the switch logs.

"Failed to send hrpc non blocking message"

I could not find a relevant reference for this message in the Cisco.com.

View 4 Replies View Related

Cisco Switching/Routing :: 10 Gigabit Ethernet Uplinks 3750E To C3KX-NM-10G With 3750X

Jan 5, 2012

I need to connect one  sw3750E with   two  3750X  , with Uplinks at 10 GBps. My doubt is the next:
 
Switch 3750E  has two TwinGig Adapter Converting 10 Gigabit Ethernet X2, phisically each twinGig adapter has 2 slots for SFP modules. Can I install sfp+ If I want to use copper for Uplink at 10 Gbps, I just need to install one SFP-H10GB-CU5M transceiver ????  the other SFP slot is disabled automatically?
 
in the other side 3750X in order to support copper at 10 Gbps a C3KX-NM-10G network module  is considered, this will be connected to SW3750E by means of  SFP-H10GB-CU5M.
 
The second 3750X will be connected to second twinGig Adapter of 3750E using another SFP-H10GB-CU5M transceiver.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved