We are trying to activate two L-ASA-SSL-100= licenses in our ASA5520 and we are getting the below error:
Wrong Sku(s) 'L-ASA-SSL-100=' for 'ASA5520_AIP20-K9' : Device contains following licenses 'ASA5520-VPN-PL,ASA5520-SSL-50, ASA-AC-M-5520, ASA5500-ENCR-K9'
Serial Number = XXXXXXX
The new serial number provided is not the same platform type as the failed serial number. An upgrade request is not allowed.
Ive got a customer asking for 2 products to be installed on an ASA 5520?
ASA 5500 SSL VPN 10 Premium User License and AnyConnect Essentials VPN License - ASA 5520 (750 Users)?
Am i correct in saying only one of those licences will actually be active at any time?
We have a 5520 ASA with a 100 user ssl license. We need to increase this but 250 is overkill. Is there an option to just add 50 more licenses or do we have to go up to 250?
View 2 Replies View RelatedNeed to know the number of VPN licenses that is available,
1) I have site to site vpn connections.
2) SSL VPn (browser)
3) IPsec client vpn.
How many vpn connections are allowed? can multiple connections be made using the same username for IPsec VPn clients.?
So i setup a failover active / passive with 2 ASA5520's
Primary asa has 750 Anyconnect vpn licensing and the secondary asa has 2 Anyconnect licenses
I haven't setup the second asa with the new 750 licenses i purchased but when i do a show version it shows that the failover licensed features shows 750...
Does this mean i do not have to install the secondary anyconnect licenses on the standby ASA unit?
output of secondary asa
:
Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 150 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active
[Code]......
I am running IOS version 8.0(5) in cisco ASA 5520. This issue i am facing is that when the memory utilzation reaches 49 percent, the web-vpn users are not able to login as they are getting a blank page. The only error which is getting in the output " sh mem webvpn allobjects" is ERROR: Memory allocation failed?
View 2 Replies View RelatedWe started getting the below syslog messages from one of our ASA5520 which was recently upgraded to 8.4(2). Any bugs on 8.4(2) that cause this or its simply the RAM failure?
%ASA-3-105010: (Primary) Failover message block alloc failed
%ASA-3-321007: System is low on free memory blocks of size 1550 (0 CNT out of 18709 MAX)
I have configured the primary firewall every thing seem to be fine, And we have configured fail over device while config is getting replicated to the fail over device we are getting below error.
ERROR: Cannot add policy to rule engine
ERROR: Unable to assign access-list LAN_out to interface inside
IOS and Model are same.But all the config got replicated from primary to secondary but except the one access group command.
access-group LAN_out in interface inside.
When trying to access the asa (8.0(3)) with asdm the console send follwing error message:
vPif_isVpifNumValid: pifNum out of range!
vPif_getVpif: bad vPifNum(0xa6) from 87EBC81 from 83833B4
Have a strong suspicion that it is a hardware failure (since asdm has worked and have tried to restart the box) can not see any errors with any show commands, but could it be a RAM error .
On my ASA5520 I am trying to do a IPSEC tunnel between two sites. When I ping the protected network on the other side I get this when debugging IPSEC:
IPSEC(crypto_map_check): crypt o map man map 20 does not hole match for ACL man1
Not too sure what this means...
I'm having a problem with the memory and also trying to create some rules on the CISCO ASA. The version that I got installed was the 8.2.5.33 on a CISCO 5520 with 512 RAM, the memory usage is on 99% used, 1% free and because of that when I'm trying to create a new rule the firewall brings me the next error..So what I did was a downgrade to the version 8.2 (4) 4 and the memory went down a little (82% used, 18% free) but I still got the error when I'm creating an access rule on the device. One thing and I'm not sure if this could affect on the performance are the number of access list and the object groups that are created.
I already open a case with CISCO TAC and they are checking if the problem is with the memory capacity or maybe a memory leak.Also the doubt that I got is with the memory that I got now available should I can create access rules or 82 is still to hig to create a rule or and object group?
I am currently getting a strange error when trying to use and crypto services on our ASA 5520 (8.0.3)Initially I observed that a connected VPN had dropped.Then when I attempted to use ASDM or SSH I was blocked.
In the end I opened telnet as a test and this was successful. Syslog also shows that traffic is passing as normal.The only obvious error I can see when observing various debug traces is this;
FW02# CTM: rsa session with no priority allocated @ 0xCF1FBBA0
CTM: Session 0xCF1FBBA0 uses a nlite (Nitrox Lite) as its hardware engine
CTM: rsa context allocated for session 0xCF1FBBA0
CTM: rsa session with no priority allocated @ 0xCE7A5EA8
[code]....
Any trouble with IOS XR licenses dissapearing after a power off ?I was able to add them correctly, but after the power off "show licenses" gives and empty message, but the logs states the licenses are already there.I'm working with a CRS-3 with IOS XR version 4.0.1.
View 1 Replies View RelatedWe are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View Relatedis that possible to increase the number of SSL VPN User Licenses on ASA5510-SSL100-K9 using for example L-ASA-SSL-50= ?Is there any limitation ?
View 3 Replies View RelatedAfter install the License for 25 AP more to a wlc 5508 with 100 AP base license and reboot WLC, the License base for 100 AP´s and this new one 25+, it's not anymore on the system, after reboot the WLC show 0 AP´s supported, and the only one license appear are 500 AP evaluation with Time expires.
View 1 Replies View RelatedI have a cisco ASA5505, with base license, it appears I can only have 2 ssl/webvpn connection running at any one time. How can I upgrade only the webvpn portion to allow more licenses?
View 2 Replies View Relatedi currently have a ASA5540 with 250 SSL VPN Premium licenses and looking to purchase another 500 licenes on top of what i already have.I have been told that i cant simply add 500 licenses onto the 250 to make 750 in total and that i need to purchase a 250-500 licenses or 250-1K licenses. Is this correct? I ask this because on the cisco website, that there is L-ASA-SSL-250-500= & L-ASA-SSL-500-750= part numbers?
View 1 Replies View RelatedWe've been upgrading our WLCs to 7.0.230.0 but I've notifced after they have been upgraded they no longer appear in the controller section in License Center on the WCS. They still exist in the WCS and the audit the configuration jobs are working. I've also tried manually triggering the Controller License Status background tasks and this runs without reporting any errors.I thought it may be because the WCS was at a lower version but I've now upgraded this to 7.0.230.0 also but the WLCs are still missing.
View 1 Replies View RelatedHow to confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info below is for the ASA i intend to delpoy this on. This platform has an ASA 5550 VPN Premium license.
View 2 Replies View RelatedShared licensing of ASA?I have 2 ASA 5585 in cluster and I have to Implement SSL / VPN license My question:Since I have a cluster in 8.3 version, can I use only one license VPN / SSL for two, without necessarily implement the Shared Server licenses and participant.
View 4 Replies View RelatedI have 2 5508 that are currently running as active with 150 licenses each. I want to go to HA SSO can 100 of the licenses be relicensed to the primary since it only requires 50 licenses to convert an active license 5508 to standby HA SSO?
View 3 Replies View RelatedWe have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
Licenses attached from Cisco:-
N7K-C7009-XL-SBUN Nexus 7009 Scalable Feature License x 1
N7K-C7009-SBUN-P1 Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion x 1
[Code].....
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies View Relatedi'm trying to install the security licenses on a 2911 router and is giving the error shown in the attached file
View 4 Replies View RelatedAny document which expalins what you need to know when looking at purchasing an ASA5505. Which clearly describes the verious permitations and combinations of these lovely little boxes?
I recently purchased a basic: ASA5505-BUN-K9
I realise now this comes with 10 internal users, 2 ssl and no anyconnect mobility. All these can be purchased as additional licenses.
Its my understanding that to support unlimmited Internal/Inside hosts - I need to purchase the L-ASA5505-SEC-PL (Security Plus License)
1) What is the model I should go for if I want to support unlimmited interneal. Can a 5505 be purchased with with security plus?
difference between License types on Cisco Prime Infra 1.2 as below
Base License
Lifecycle management License
compliance management license
Automated deployment Gateway
Assurance Management License.
When I connect two 4500-x switches in a VSS setup, do I need to have both 4500-x switches equiped with Enterprise Services, or can I mix IP Base with Enterprise Services in one VSS setup in order to save on licensing costs?
View 1 Replies View RelatedI am getting a hard time in order to understand the real difference between the two types of context aware licenses for the MSE:
1 . AIR-CAS-1KC-K9 - Context Aware License For 1K Clients and Tags (RSSI based)
2. AIR-CAS-1KT-K9 - Context Aware License For 1K Tags(RSSI, Chokeponts and TDOA)
For a regular network without any devices with tags such as RFID, I understand I do not need to get the .2, only .1, even though the .1 also is shared with clients at 1K of each. Also, the .2 does not say clients, only tags and advanced features as TDOA. Going through the Q&A it does not clearly says the difference, when to use one or the other.
Is there a maximum number of licenses for connections to a 877?The reason I ask is that our routers are managed by a datacentre and when I asked for the login details I was told that I couldnt have them due to licensing reasons with no other explanation.
View 1 Replies View RelatedI am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?
View 4 Replies View RelatedI recently installed additional licenses on my 2 WLC 5508s. Then I installed NCS on a virtual appliance. Installed the NCS license, added the controllers, refreshed configs, created templates, etc. However, when I go to look at the License Center, I can't see any controller licenses. When I log directly on to the controllers themselves, the licenses say they are installed and "in use". I've looked all over and cannot determine why the controller licenses do not show up.
NCS version: 1.1.0.58
WLC version: 7.2.103.0
We have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?