I have 2 5508 that are currently running as active with 150 licenses each. I want to go to HA SSO can 100 of the licenses be relicensed to the primary since it only requires 50 licenses to convert an active license 5508 to standby HA SSO?
View 3 RepliesI have two ASA 5505's with Security Plus licenses on both.I am trying to force them to becoming an HA pair using active/standby.When I enable failover I get this message:
Mate's license (Licensed Cores ) is not compatible with my license (Licensed Cores ). Failover will be disabled.Do I need to apply new licenses to the ASA's?
Device licence details (same on both):Cisco Adaptive Security Appliance Software Version 8.2(1) [code] This platform has an ASA 5505 Security Plus license.
After install the License for 25 AP more to a wlc 5508 with 100 AP base license and reboot WLC, the License base for 100 AP´s and this new one 25+, it's not anymore on the system, after reboot the WLC show 0 AP´s supported, and the only one license appear are 500 AP evaluation with Time expires.
View 1 Replies View RelatedWe have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
We have a pair of N7K distribution switches connected to a pair of N7K Aggregation switches.We run vPC on both pairs of n7k's.
-n7k-d1 has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC1)
-n7k-d2 also has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC2)
My problem is that Spanning-Tree is blocking PC2 and all traffic from n7k-d2 is traversing the Peer-Link before reaching the Aggregation layer. Is this the best design for connecting two pairs of n7k's with vPC or if a better design would be to connect all 4 links into the same Port-Channel and vPC?
I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
difference between License types on Cisco Prime Infra 1.2 as below
Base License
Lifecycle management License
compliance management license
Automated deployment Gateway
Assurance Management License.
I am getting a hard time in order to understand the real difference between the two types of context aware licenses for the MSE:
1 . AIR-CAS-1KC-K9 - Context Aware License For 1K Clients and Tags (RSSI based)
2. AIR-CAS-1KT-K9 - Context Aware License For 1K Tags(RSSI, Chokeponts and TDOA)
For a regular network without any devices with tags such as RFID, I understand I do not need to get the .2, only .1, even though the .1 also is shared with clients at 1K of each. Also, the .2 does not say clients, only tags and advanced features as TDOA. Going through the Q&A it does not clearly says the difference, when to use one or the other.
I am unable to get my 4402 and 2504 to pair in mobility, I made short video to explain my issues.also do not worry there is no propritary information in this video, I am working on a lab that does not mirror any production networks.
View 6 Replies View RelatedWe have a pair of 1310's (running 12.3(8)JEA3) connecting 2 buildings together. The wired side of each AP is connected to switchports configured as access ports.
But, now we need to extend multiple VLANs across the wireless bridge. So I'm thinking I just need to configure some sub-interfaces on the radio side and ethernet side and bridge them together. But I'm unclear on if I need an SSID for each bridge group. I would hope not. But after reading this, I'm not sure. Most of the documentation seems to be dealing with wireless clients. Well, in this case I don't have any wireless clients and just need to extend VLANs.
These 2 sites are hundreds of miles away from where I am, and I don't have any 1310's to test this out on. Should I be able to load similar software on other AP's (like 1142's) and have them function as bridges to test this out?
I bought this wireless router about a year+ ago, and it's just great. It's attached to the cable modem "downstairs" and right now it supports 2 smartphones wirelessly plus an ancient wired cable to an "upstairs" home office.
I'd like to improve overall performance with a wireless bridge to a gigabit hub in the upstairs office. I'd also like to add a second wireless bridge so I can stream movies to a box that would be attached to my TV, which does not have built-in wireless access.
Trendnet seems to have some interesting wireless bridges, but in the past I had a Trendnet wireless router with really, reallly bad software.
Ive got a customer asking for 2 products to be installed on an ASA 5520?
ASA 5500 SSL VPN 10 Premium User License and AnyConnect Essentials VPN License - ASA 5520 (750 Users)?
Am i correct in saying only one of those licences will actually be active at any time?
We have a 5520 ASA with a 100 user ssl license. We need to increase this but 250 is overkill. Is there an option to just add 50 more licenses or do we have to go up to 250?
View 2 Replies View RelatedNeed to know the number of VPN licenses that is available,
1) I have site to site vpn connections.
2) SSL VPn (browser)
3) IPsec client vpn.
How many vpn connections are allowed? can multiple connections be made using the same username for IPsec VPn clients.?
Any trouble with IOS XR licenses dissapearing after a power off ?I was able to add them correctly, but after the power off "show licenses" gives and empty message, but the logs states the licenses are already there.I'm working with a CRS-3 with IOS XR version 4.0.1.
View 1 Replies View RelatedI've got a Studio 15 Dell with the 365 bluetooth module running win7 64-bit and I'm using it with my iPhone for internet tethering / mobile broadband.
The iPhone 3GS is paired with the laptop just fine and no errors and can connect and use the internet tethering. The problem I have is that it takes about 5 minutes before I get the option to Connect to the Access Point.
It doesn't matter if I turn bluetooth on/off on the iPhone, reboot the iphone or turn the bluetooth adapter on / off on the laptop. I try refreshing, I try forcing the pairing from the iPhone interface and so on.
I have the dell configured to allow the iPhone to always connect without prior authentication or extra approval.
Nothing seems to make a difference other than to sit around and wait 3-5 minutes and then all of sudden I get the option to Connect to the Access Point.
We are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View Relatedis that possible to increase the number of SSL VPN User Licenses on ASA5510-SSL100-K9 using for example L-ASA-SSL-50= ?Is there any limitation ?
View 3 Replies View RelatedI have a cisco ASA5505, with base license, it appears I can only have 2 ssl/webvpn connection running at any one time. How can I upgrade only the webvpn portion to allow more licenses?
View 2 Replies View Relatedi currently have a ASA5540 with 250 SSL VPN Premium licenses and looking to purchase another 500 licenes on top of what i already have.I have been told that i cant simply add 500 licenses onto the 250 to make 750 in total and that i need to purchase a 250-500 licenses or 250-1K licenses. Is this correct? I ask this because on the cisco website, that there is L-ASA-SSL-250-500= & L-ASA-SSL-500-750= part numbers?
View 1 Replies View RelatedWe've been upgrading our WLCs to 7.0.230.0 but I've notifced after they have been upgraded they no longer appear in the controller section in License Center on the WCS. They still exist in the WCS and the audit the configuration jobs are working. I've also tried manually triggering the Controller License Status background tasks and this runs without reporting any errors.I thought it may be because the WCS was at a lower version but I've now upgraded this to 7.0.230.0 also but the WLCs are still missing.
View 1 Replies View RelatedHow to confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info below is for the ASA i intend to delpoy this on. This platform has an ASA 5550 VPN Premium license.
View 2 Replies View RelatedShared licensing of ASA?I have 2 ASA 5585 in cluster and I have to Implement SSL / VPN license My question:Since I have a cluster in 8.3 version, can I use only one license VPN / SSL for two, without necessarily implement the Shared Server licenses and participant.
View 4 Replies View RelatedWe are trying to activate two L-ASA-SSL-100= licenses in our ASA5520 and we are getting the below error:
Wrong Sku(s) 'L-ASA-SSL-100=' for 'ASA5520_AIP20-K9' : Device contains following licenses 'ASA5520-VPN-PL,ASA5520-SSL-50, ASA-AC-M-5520, ASA5500-ENCR-K9'
Serial Number = XXXXXXX
The new serial number provided is not the same platform type as the failed serial number. An upgrade request is not allowed.
We have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
Licenses attached from Cisco:-
N7K-C7009-XL-SBUN Nexus 7009 Scalable Feature License x 1
N7K-C7009-SBUN-P1 Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion x 1
[Code].....
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies View Relatedi'm trying to install the security licenses on a 2911 router and is giving the error shown in the attached file
View 4 Replies View RelatedAny document which expalins what you need to know when looking at purchasing an ASA5505. Which clearly describes the verious permitations and combinations of these lovely little boxes?
I recently purchased a basic: ASA5505-BUN-K9
I realise now this comes with 10 internal users, 2 ssl and no anyconnect mobility. All these can be purchased as additional licenses.
Its my understanding that to support unlimmited Internal/Inside hosts - I need to purchase the L-ASA5505-SEC-PL (Security Plus License)
1) What is the model I should go for if I want to support unlimmited interneal. Can a 5505 be purchased with with security plus?
When I connect two 4500-x switches in a VSS setup, do I need to have both 4500-x switches equiped with Enterprise Services, or can I mix IP Base with Enterprise Services in one VSS setup in order to save on licensing costs?
View 1 Replies View RelatedIs there a maximum number of licenses for connections to a 877?The reason I ask is that our routers are managed by a datacentre and when I asked for the login details I was told that I couldnt have them due to licensing reasons with no other explanation.
View 1 Replies View RelatedI am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?
View 4 Replies View RelatedSo i setup a failover active / passive with 2 ASA5520's
Primary asa has 750 Anyconnect vpn licensing and the secondary asa has 2 Anyconnect licenses
I haven't setup the second asa with the new 750 licenses i purchased but when i do a show version it shows that the failover licensed features shows 750...
Does this mean i do not have to install the secondary anyconnect licenses on the standby ASA unit?
output of secondary asa
:
Licensed features for this platform:Maximum Physical Interfaces : Unlimited perpetualMaximum VLANs : 150 perpetualInside Hosts : Unlimited perpetualFailover : Active/Active
[Code]......
I recently installed additional licenses on my 2 WLC 5508s. Then I installed NCS on a virtual appliance. Installed the NCS license, added the controllers, refreshed configs, created templates, etc. However, when I go to look at the License Center, I can't see any controller licenses. When I log directly on to the controllers themselves, the licenses say they are installed and "in use". I've looked all over and cannot determine why the controller licenses do not show up.
NCS version: 1.1.0.58
WLC version: 7.2.103.0