difference between License types on Cisco Prime Infra 1.2 as below
Base License
Lifecycle management License
compliance management license
Automated deployment Gateway
Assurance Management License.
we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
we have Cisco LMS 4.1 with 300 device license. we need to upgrade to Cisco Prime infrastructure 1.2 if we can do that with smartnet contract, what is the smartnet to get this update ?
View 5 Replies View RelatedMy VMware virtual machine running Prime Infrastructure 1.2 is continiously rebooting.VM console is generating logs as shown below.
View 1 Replies View RelatedWasn't sure the format for time zone when installing eval copy of Prime Infra 1.3. Set for UTC now and need to change to CST6CDT. Not sure how to change it.
View 3 Replies View RelatedI have recently installed prime lms 1.3 and added several switches to be managed. Is there at this moment a possibility to display port statistics and network statistics for the wired part of the network? I am used working with LMS, but features like the topology view, with bandwidth usage is not yet integrated in Prime Infra it seems. Is there anything to monitor the wired network in Prime Infra 1.3.
View 2 Replies View RelatedI am getting a hard time in order to understand the real difference between the two types of context aware licenses for the MSE:
1 . AIR-CAS-1KC-K9 - Context Aware License For 1K Clients and Tags (RSSI based)
2. AIR-CAS-1KT-K9 - Context Aware License For 1K Tags(RSSI, Chokeponts and TDOA)
For a regular network without any devices with tags such as RFID, I understand I do not need to get the .2, only .1, even though the .1 also is shared with clients at 1K of each. Also, the .2 does not say clients, only tags and advanced features as TDOA. Going through the Q&A it does not clearly says the difference, when to use one or the other.
before I open a TAC case: How does Cisco Prime NCS handle the device licenses for stack of 3750 switches? Just one device license for the stack or a license for every physical switch in the stack? I can't find a answer on the Cisco website, but maybe one of you knows it from a deployment you have done..
View 2 Replies View RelatedI am having access point 1240AG and planning to deploy ISE as a exteral radius server. I would like to know how different authorization policy need to configure in AP/ISE. Whether I can use named ACL or VLANs (CoA) as a enforcement types without use of WLC. If yes then how?
View 10 Replies View RelatedI'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
After install the License for 25 AP more to a wlc 5508 with 100 AP base license and reboot WLC, the License base for 100 AP´s and this new one 25+, it's not anymore on the system, after reboot the WLC show 0 AP´s supported, and the only one license appear are 500 AP evaluation with Time expires.
View 1 Replies View RelatedI have 2 5508 that are currently running as active with 150 licenses each. I want to go to HA SSO can 100 of the licenses be relicensed to the primary since it only requires 50 licenses to convert an active license 5508 to standby HA SSO?
View 3 Replies View RelatedWe have a cisco services contract with IBM that supplies us access to the usb drivers, firmwares etc, and we have a Cisco 5508 6.x running ~30 Cisco 1252's, some 1231's and (potentially) some 1262's once the firmware update is done.
We have a base-count license(permanent) of 50AP's, no expiry
So I guess my questions are:
1) When flashing the new firmware - do the licenses require any sort of modification, or will they work as per normal
2) Are any serial numbers or codes required to be entered once the 7.0.98 firmware is installed?
3) I assume that the old firmware/config becomes 2nd in line to the primary boot option of the firmware during boot process?
Ive got a customer asking for 2 products to be installed on an ASA 5520?
ASA 5500 SSL VPN 10 Premium User License and AnyConnect Essentials VPN License - ASA 5520 (750 Users)?
Am i correct in saying only one of those licences will actually be active at any time?
We have a 5520 ASA with a 100 user ssl license. We need to increase this but 250 is overkill. Is there an option to just add 50 more licenses or do we have to go up to 250?
View 2 Replies View RelatedNeed to know the number of VPN licenses that is available,
1) I have site to site vpn connections.
2) SSL VPn (browser)
3) IPsec client vpn.
How many vpn connections are allowed? can multiple connections be made using the same username for IPsec VPn clients.?
Any trouble with IOS XR licenses dissapearing after a power off ?I was able to add them correctly, but after the power off "show licenses" gives and empty message, but the logs states the licenses are already there.I'm working with a CRS-3 with IOS XR version 4.0.1.
View 1 Replies View RelatedWe are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies View Relatedis that possible to increase the number of SSL VPN User Licenses on ASA5510-SSL100-K9 using for example L-ASA-SSL-50= ?Is there any limitation ?
View 3 Replies View RelatedI have a cisco ASA5505, with base license, it appears I can only have 2 ssl/webvpn connection running at any one time. How can I upgrade only the webvpn portion to allow more licenses?
View 2 Replies View Relatedi currently have a ASA5540 with 250 SSL VPN Premium licenses and looking to purchase another 500 licenes on top of what i already have.I have been told that i cant simply add 500 licenses onto the 250 to make 750 in total and that i need to purchase a 250-500 licenses or 250-1K licenses. Is this correct? I ask this because on the cisco website, that there is L-ASA-SSL-250-500= & L-ASA-SSL-500-750= part numbers?
View 1 Replies View RelatedWe've been upgrading our WLCs to 7.0.230.0 but I've notifced after they have been upgraded they no longer appear in the controller section in License Center on the WCS. They still exist in the WCS and the audit the configuration jobs are working. I've also tried manually triggering the Controller License Status background tasks and this runs without reporting any errors.I thought it may be because the WCS was at a lower version but I've now upgraded this to 7.0.230.0 also but the WLCs are still missing.
View 1 Replies View RelatedHow to confirm the linceses required for me to get this working. I understand that it needs the 'AnyConnect for Cisco VPN Phone' license but do I also need to have anyconnec essentials? This is for ASA version 8.2 and the a license info below is for the ASA i intend to delpoy this on. This platform has an ASA 5550 VPN Premium license.
View 2 Replies View RelatedShared licensing of ASA?I have 2 ASA 5585 in cluster and I have to Implement SSL / VPN license My question:Since I have a cluster in 8.3 version, can I use only one license VPN / SSL for two, without necessarily implement the Shared Server licenses and participant.
View 4 Replies View RelatedWe are trying to activate two L-ASA-SSL-100= licenses in our ASA5520 and we are getting the below error:
Wrong Sku(s) 'L-ASA-SSL-100=' for 'ASA5520_AIP20-K9' : Device contains following licenses 'ASA5520-VPN-PL,ASA5520-SSL-50, ASA-AC-M-5520, ASA5500-ENCR-K9'
Serial Number = XXXXXXX
The new serial number provided is not the same platform type as the failed serial number. An upgrade request is not allowed.
We have ordered the following 10 line items , but only got 3 licenses , unless the 3 licenses somehow have all the licenses integrated into the 3 part numbers below, but I suspect not.
Licenses attached from Cisco:-
N7K-C7009-XL-SBUN Nexus 7009 Scalable Feature License x 1
N7K-C7009-SBUN-P1 Inc LAN,ADV,TRS,EL2,DCNM,DCNMSAN,MPLS,SAN,XL -Promotion x 1
[Code].....
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies View Relatedi'm trying to install the security licenses on a 2911 router and is giving the error shown in the attached file
View 4 Replies View RelatedAny document which expalins what you need to know when looking at purchasing an ASA5505. Which clearly describes the verious permitations and combinations of these lovely little boxes?
I recently purchased a basic: ASA5505-BUN-K9
I realise now this comes with 10 internal users, 2 ssl and no anyconnect mobility. All these can be purchased as additional licenses.
Its my understanding that to support unlimmited Internal/Inside hosts - I need to purchase the L-ASA5505-SEC-PL (Security Plus License)
1) What is the model I should go for if I want to support unlimmited interneal. Can a 5505 be purchased with with security plus?
When I connect two 4500-x switches in a VSS setup, do I need to have both 4500-x switches equiped with Enterprise Services, or can I mix IP Base with Enterprise Services in one VSS setup in order to save on licensing costs?
View 1 Replies View RelatedIs there a maximum number of licenses for connections to a 877?The reason I ask is that our routers are managed by a datacentre and when I asked for the login details I was told that I couldnt have them due to licensing reasons with no other explanation.
View 1 Replies View RelatedI am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?
View 4 Replies View Related
