Cisco :: Network User Statistics In Prime Infra 1.3
Apr 28, 2013
I have recently installed prime lms 1.3 and added several switches to be managed. Is there at this moment a possibility to display port statistics and network statistics for the wired part of the network? I am used working with LMS, but features like the topology view, with bandwidth usage is not yet integrated in Prime Infra it seems. Is there anything to monitor the wired network in Prime Infra 1.3.
View 2 Replies
ADVERTISEMENT
Dec 26, 2012
we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
View 2 Replies
View Related
Dec 25, 2012
we have Cisco LMS 4.1 with 300 device license. we need to upgrade to Cisco Prime infrastructure 1.2 if we can do that with smartnet contract, what is the smartnet to get this update ?
View 5 Replies
View Related
Dec 10, 2012
My VMware virtual machine running Prime Infrastructure 1.2 is continiously rebooting.VM console is generating logs as shown below.
View 1 Replies
View Related
May 15, 2013
Wasn't sure the format for time zone when installing eval copy of Prime Infra 1.3. Set for UTC now and need to change to CST6CDT. Not sure how to change it.
View 3 Replies
View Related
Jan 13, 2013
difference between License types on Cisco Prime Infra 1.2 as below
Base License
Lifecycle management License
compliance management license
Automated deployment Gateway
Assurance Management License.
View 4 Replies
View Related
Mar 28, 2013
We use Cacti to get interfaces statistics of a ASR1002 router (version 03.04.02.S.151-3.S2).A new GRE tunnel has been created, but unfortunately we are not able to get basic interface average during the day.What is surprising is the fact the graphs are built on the night only.
It seems as soon as we exceed some level of Bandwidth (~ 700-800k) the tool does not get the information.The OID I try to get are ifHCInOctets (.1.3.6.1.2.1.31.1.1.1.6) and ifHCOutOctets (.1.3.6.1.2.1.31.1.1.1.10) and some other interface statistics for both 64 and 32 bits. [code]
View 2 Replies
View Related
Mar 4, 2013
possible in Cisco Prime 4.2, to kick off a particular user? in GUI or CLI ?
View 0 Replies
View Related
Nov 2, 2011
Does Cisco have any plans to incorporate the CiscoWorks User Tracking Utility into LMS Prime 4.2 or any newer version of LMS? This tool is very useful in identifing where a computer or device is located on a switch. I know SolarWinds just came out with their own version of the User Tracking utility, and I am wondering if Cisco is going to continue on with theirs.
View 1 Replies
View Related
Sep 27, 2011
Are there any good freeware software for network workload performance reporting (i.e. monitoring, statistics, etc. )?
View 4 Replies
View Related
Jul 1, 2012
I am having access point 1240AG and planning to deploy ISE as a exteral radius server. I would like to know how different authorization policy need to configure in AP/ISE. Whether I can use named ACL or VLANs (CoA) as a enforcement types without use of WLC. If yes then how?
View 10 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
Mar 27, 2013
I am looking for a "no marketing babble" explanation of what exactly Cisco Prime Infrastructure does, that the built in 5508 Wifi administration console and Cisco Network Assitant does not do.I already use the "Cisco UC560 Configuration Assistant", the "Cisco Network Assistant" for our switches, and the "Wifi 5508 web admin console", and I am fine with that.At another site where I work, that is now going with Cisco Wifi, it is suggested that "Cisco Prime Infrastructure" be purchased.Is it important to me to have a "single pane of glass" view of the entire network? NO IT IS NOT.
All this marketing babble about having everything converged and accessible for mobile BYOD users. Yeah, that's great, but what is Cisco Prime Infrastructure actually going to do about all the mobile wifi devices coming in to the network that MUST use a web proxy to get out of our network? Many don't deal with proxy.pac correctly or don't read it at all, unless that function is explicitly turned on, by the individual device owner, in an often hidden location in their device settings. I am mainly looking at the $3000 a year price for Prime Infrastructure and going, no way, the Cisco Network Assistant and 5508 Wifi web console that are thrown in for free with the new hardware is fine with me.
View 1 Replies
View Related
Jan 9, 2013
just found that on [URL], it stated that Cisco ASR 1000's management tool is Cisco Prime Network Analysis Module, which is same name as software that can be install in SRE of Cisco ISR G2 router for network analysis via web browser.
My question here is this mean Cisco ASR 1000 has built-in support for Cisco Prime Network Analysis Module, which has similar function as the one on Cisco ISR G2 router's SRE?
View 1 Replies
View Related
Sep 18, 2012
I have such input data:
2xN7K-C7010 - Nexus7000 C7010 (10 Slot) Chassis
2xN7K-M132XP-12 - 32x10Gbps
NX-OS version 6.1(1)
I have enable (by default) QoS feature on them:
N7k# show policy-map interface brief
Interface/VLAN [Status]:INP QOS OUT QOS INP QUE OUT QUE
================================================================================
port-channel1 [Active]: default-in-po default-out-p
port-channel2 [Active]: default-in-po default-out-p
port-channel10 [Active]: default-in-po default-out-p
Ethernet1/1 [Active]: default-in-po default-out-p
[code]....
View 3 Replies
View Related
Apr 15, 2012
I am interested in gathering cumulative threat-detection statistics from an ASA running 8.3, and displaying number of attacks over time. I am already capturing traffic information via netflow, but am interested in getting threat information.
Is there a way to capture the statistics via SNMP or any other method?
View 3 Replies
View Related
Sep 11, 2012
when using "show mls statistics" I see a lot packets are getting L3 Processed. Does that mean they are getting software-forwarded?
IOS is 12.2(33)SXI5.
Cat6k#show mls statistics
Statistics for Earl in Module 5
L2 Forwarding Engine
[Code]....
View 1 Replies
View Related
Feb 23, 2013
how can I reset the port statitics on the RV180 router without rebooting the router? I have the latest firmware.
View 5 Replies
View Related
Sep 19, 2012
understanding of "mls qos interface stat"
I took a switch and connected it to my LAN switch is 2960 with LanBase image and PoE on it I have 3 interfaces in up state - 2 interfaces with cisco phones (6921 and 9951) nad 1 interface as uplink
here is its configuration
interface FastEthernet0/1
switchport mode access
switchport voice vlan 555
[Code].....
View 9 Replies
View Related
Mar 6, 2012
I have a little problem...I want to see the maximum tcp connections that I had on my Cisco. I tried using show ip statistics but it's not working. I have a Cisco Catalyst 3750G (WS-C3750G-48TS)
IOS -> Version 12.2(52)SE, RELEASE SOFTWARE (fc3)
View 3 Replies
View Related
Aug 7, 2011
I'm running v4.3.5 in our WAAS environment. At the CLI of one of our 7341 WAEs, there are several connections that show up [code] However, in the Central Manager nothing shows up - not even empty graphs - when I click on a device and go to monitor/connections statistics. After a few minutes, I do get an error message that states "Error retrieving connection stats. Please ensure that the device is online and then refresh." By the way, I get all other statics in the GUI such as Optimization Details Report, Traffic Summary Report, etc. Another thing, these WAEs are behind a router and supposedly the ports to allow access to/from the WAEs and other data is allowed through the firewall.
Is there some special port that needs to be opened on the firewall to allow for 'connection statistics' information displayed, that doesn't need to be opened for the other statistics to display? Or could this be a bug in the software?
View 1 Replies
View Related
Oct 11, 2012
I have the Cisco EPC3825 EuroDocsis 3.0 Gateway and i cannot get statistics from this modem on snmp. Use snmpwalk. Nothing was found in settings of device.
View 1 Replies
View Related
Feb 7, 2013
Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.12.11 Build 120320 Rel.51047n
ISP : BSNL
how to get a graph of the router statistics like upload and download speeds - both total and per device? Something like MRTG. The closest I came to getting data from the router was with RouterStats-Lite, but I was unable to get it to work.
View 6 Replies
View Related
Jul 25, 2012
I have users connected to a 2960-S running 12.2(53r)SE complaining of slow network, specifically Internet performance while the upstream 2960 on the same vlan has no such issues, so I don't suspect link congestion on the face of things.I'm planning on upgrading the code, but wanted to see what could be checked first. I'm seeing some drops but could use some tips on how to proceed from here as to what might be the issue. CPU is under 10% whenever I check it.
View 7 Replies
View Related
Jun 17, 2009
how can I clear the counters of the policy-map statistics in an 7600 and the 1841 router?
View 6 Replies
View Related
Oct 16, 2012
the WLC 4404 present this logs:
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/927/stat.(erno 24)
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'gccp_t'
*osapiReaper: Oct 02 14:55:11.152: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/926/stat.(erno 24)(code )
when present this loggs the device present those symptoms:
lost GUI session
Lost console conection
Lost SSH and Telnet conecction
the WLC 4404 not work is stopedd
View 3 Replies
View Related
Mar 10, 2013
I have an E2500 router, running the latest firmware 1.0.7.
Where or how can i see which is the machine (mac or ip) that is doing more traffic, in fact i would like to see what computers are doing how much traffic.
This is a default on most routers, its so weird to not been able to find this on a Cisco product.
View 1 Replies
View Related
Jun 24, 2012
Six month ago I installed and configured a wireless mesh with the equipment named. From two weeks ago one AP (MAP) restarts every day. In Wireless Lan Controller appears this logs:
"Unable to find AP entry in the database, could not process statistics information"
View 2 Replies
View Related
Sep 22, 2011
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
View 1 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Oct 10, 2011
I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies
View Related
Nov 21, 2012
Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies
View Related