Cisco VPN :: ASA 5505 EasyVPN And 3rd / DMZ Interface?
Feb 23, 2011
We have many new and very small remote sites that will be connecting via an ASA5505 using easy VPN. Works without an issue and we've got the configuration and process nailed down.
The challenge I was presented with today involve non-standard remote sites where I need to configure a third interface on an ASA 5505 and allow it to pass directly to the Internet and not go through the VPN. Configuration of the third interface, assignment and configuration of the ACLs / NAT(PAT) are straight forward.
The challenge I face and haven't been able to find a direct answer to is if it's possible to have the traffic bypass the easy vpn network extension process. At this time the traffic is going down the tunnel which isn't what I want.
I fear I'll have to build classic site-to-site VPN configurations which isn't a huge issue though it breaks all maintenance/operations methods, processes and I'll have to spend time training the support team how to detect the differences.
View 2 Replies
ADVERTISEMENT
Oct 18, 2012
I've two sites, the branch with an ASA 5505 and on the corporate office i've an ASA 5510.I need to make a easy vpn tunnel between this to sites and I've made some configuration, but for now, the ikev1 isn't working.
View 1 Replies
View Related
Jul 11, 2011
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.
The Cisco ASA has the 50 internal user license with 10 VPN peers.
We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails.
Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences?
This seems to be the issue from what I can see, just need confirmation.
View 1 Replies
View Related
Mar 8, 2012
I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.
View 3 Replies
View Related
Jan 23, 2013
I have a branch office set up with a cable modem and an ASA 5505 as an easyvpn hardware client with network extension mode enabled, and connects to a PIX515E at the headend.I'm working on a separate issue for why the Internet connection drops periodically at the site, but my main problem is as follows.In this location, I have an 1142 LAP. It can boot up, and join the WLC just fine. Performance seems a little slow when it's working, but it works. The real issue is, if the VPN connection drops and reestablishes for any reason, the wireless clients all cease being able to communicate. All wired clients seem to bounce back without a problem.
The access point still shows to be joined to the controller, the access point never goes down, just wireless clients can't access anything any more. If I reload the access point, clients reassociate and continue on their merry way. For now, I am experimenting to keep the connection from dropping, but I'd really like to get it where I don't have to babysit this thing all day and night, and it can rejoin and function normally by itself after an outage.We are changing to this configuration from wireless bridging due to interference and reliability issues - however, I never experienced any similar issues with this particular access point before, so it's not the access point itself.
View 4 Replies
View Related
Oct 10, 2012
I am installing 2 ASA 5505s at home offices with dynamic IPs. The EasyVPN server is a ASA585x. I am using the 5505s in NEM mode. I configured a unique DHCP scope on each 5505. I have a dynamic crpto map on the server. I configured unique tunnel groups, group policies and usernames for each site on the server. This seems to work fine. Is it normal to configure unique tunnel groups, group policies and usernames for each remote site?
View 2 Replies
View Related
Mar 2, 2011
When ASA 5505 was installed we selected Easy VPN Remote. Now we want to disable it. In ASDM we navigate to Configuration > Remote Access VPN > Easy VPN Remote and try to clear the Enable Easy VPN Remote checkbox but it will not uncheck.
View 2 Replies
View Related
Apr 28, 2011
So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.
VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work
[URL]...
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.
View 2 Replies
View Related
Jan 19, 2012
We have a number of 5505 ASAs at remote sites all of which are configured to connect to one of two head-end servers.We need to change the primary head-end IP addresses. At the moment devices are successfully connected to the secondary.If we issue vpnclient server i.j.k.l e.f.g.h then the device drops off the network and won't reconnect until it is power cycled.If we make the changes in ASDM using the GUI to remove the old primary and add in the new primary the ASDM says "No changes made".Devices are running 8.2 and 8.4 code and behaviour is the same.
how to change head-end server IP addresses without the device disconnecting and not coming back up? According to the configuration guide the ASA should cycle through the addresses every 8 seconds until it can connect - but it doesn't seem to do this as it won't connect to the good secondary head-end either!
View 1 Replies
View Related
Mar 20, 2012
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
View 5 Replies
View Related
Jun 3, 2012
We have an ASA 5505 in our environment and currently two IPSec L2L VPN tunnels are established. But we are planning to connect using Easy VPN(Network Extension Mode) to another site as Client. Is it possible to configure Easy VPN configurations by keeping the currently active IPSec L2L VPN(Site-to-Site) tunnels?
Following is the warning that we get when tried to configure Easy VPN Client.NOCMEFW1(config)# vpnclient enable
* Remove "nat (inside) 0 S2S-VPN"
* Detach crypto map attached to interface outside
* Remove user-defined tunnel-groups
* Remove manually configured ISA policies
CONFIG CONFLICT: Configuration that would prevent successful Cisco EasyVPN Remote operation has been detected, and is listed above. P
View 6 Replies
View Related
May 1, 2012
I have a Cisco ASA 5505 and I have my internal and external interfaces configured but I currently cannot ping from the inside to an IP Address on the outside. I had this setup and working and I have another set of equirement that I am replacing that is working with my service provider so I know it is a configuration issue. When I ping 4.2.2.2 for example I get:
Destination host unreachable
Do I need to add a static route from my inside interface to my outside interfaces?
: Saved
:
ASA Version 8.2(5)
!
hostname pxasa
[Code].....
View 2 Replies
View Related
May 16, 2011
I need to configure one interface in failover because the client has 2 ISP.[CODE]
View 2 Replies
View Related
Feb 21, 2010
I have an ASA 5505 configured to get a DHCP'd IP address from the ISP on it's outside interface. The problem I am seeing is when the ISP renews their IP address, the ASA 5505 is still holding on to the old IP address information. I have to either manually renew the IP or reload the ASA. I have the potential of rolling out hundreds of these devices and I would not like my customers to have to reboot their ASA everytime the ISP's DHCP lease experies. I am using an easy vpn autoconnecting to an ASA 5520. Static IP's are not an option on the outside interface of the ASA 5505's.
View 8 Replies
View Related
Dec 10, 2012
I want to creat sub int on ASA 5505 but when I am trying below command it show error.
------------------------------------
config t
int f0/0.3400
------------------------------------
My ASA software version is 8.2(5).
View 5 Replies
View Related
Jun 12, 2013
Few week ago we purchase Cisco ASA 5505 as replacement broken Dlink DFL800. I try to configure all setting like it was on DLink, and all work fine with exception of one thing.
We have some resource like terminal server, that placed in internal network with configured static nat on ASA, some users use it from internal network and some from internet, but both of them use one DNS name for it like terminal.%company_name%.ru. all work fine for internet users when they try to reach server from internet with but internal users unable to use external ip, they even unable to ping external ip address from internal network. Yes i know that one way to solve this problem, is just to use internal DNS server so it can resolve terminal.%company_name%.ru in to internal ip address, BUT i want to know does exsist any way to "loop" trafic this way?
In DLink config there was 3 string in config that solve this problem
<IPRule Name="RDP_Terminal" Action="SAT" SourceInterface="any" SourceNetwork="all-nets" DestinationInterface="core" DestinationNetwork="InterfaceAddresses/wan1_ip" Service="rdp"
[Code].....
View 5 Replies
View Related
May 13, 2009
Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port.
View 8 Replies
View Related
Sep 9, 2011
I setup a site-to-site VPN tunnel at the remote ASA5505. I am able to asdm to the outside interface but not ssh. I switch to telnet and still not allow me to access. I added an ACL to allow telnet any to the outside interface but still not working. In ASDM I see the log Here is the second issue. When I want to change the telnet back to ssh using ASDM I got the following error.
View 2 Replies
View Related
Jul 27, 2011
I'm new to working with the ASA 5505 ,VPN and reverse NAT.
The basic setup is as follows. I'm trying to setup a IPsec site to site tunnel with reverse nat on the remote side.
I have as the tunnel up and it passes traffic. I have setup reverse NAT for 172.x.x.1 to translated IP 216.x.2.101 my ASA also has an IP address of 216.x.2.102.
Any connection from 172.x.x.1 to 216.x.2.1 should appear to be comming from 216.x.2.101
When I ping or telnet from 216.116.86.1 to an open port on 216.x.2.101 I get the banner from 172.x.x.1, seems like it is working.
However in my setup I'm only given a singel IP that of the NAT address 216.x.2.101, so when I remove the IP address assigned to the inside interface 216.x.2.102. all conductivity is lost.
When I set the inside interface to 216.x.2.101 and I setup a static NAT rule for 172.x.x.1 to 216.x.2.101, I get a message that says all traffic will be redirected and I will be unable to connect to the ASA.
Once thats in place, and I make any connection from 216.x.2.1 to 216.x.2.101on any port I get a connection but then it's reset, I no longer get the telent banner I was expecting.
My running config is,
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
View 1 Replies
View Related
Aug 13, 2011
I have a problem where my outside interface stops passing traffic and the only way to resolve the issue is to reload the ASA, the interface never is down it just stops passing traffic. The inside interface never stops allowing traffic to pass as I can get to all my internal servers and shared drives.
The firmware is:
asa821-k8.bin
Running Config
: Saved:ASA Version 8.2(1) !hostname f1domain-name somedomain.co.ukenable password w1Y.GBKFyC5NqO3M encryptedpasswd 2KFQnbNIdI.2KYOU
[Code].....
View 4 Replies
View Related
Jan 6, 2011
We have Cisco ASA 5505 box.We have a /29 subnet available.At this moment one of IP addresses in this rage is assigned to VLAN2 used for outside interface all outgoing traffic from VLAN10 (for employees) will go out using one IP, xxx.xxx.xxx.1all outgoing traffic from VLAN20 (for visitors) will go out using second IP, xxx.xxx.xxx.2all outgoing traffic from VLAN10 host yyy.yyy.yyy.yyy (mail server, webmail, ...) will go out using third IP, xxx.xxx.xxx.3all specified incomming traffic to xxx.xxx.xxx.3 will be NATted to internal host yyy.yyy.yyy.yyy in VLAN10 .The main purpose is to have specific public IP address for mail server only not to get to any black list,and to give visitors different outgoing IP address than for our internal users.
View 3 Replies
View Related
Nov 6, 2011
I'm using asa 5505 with 8.4(2) and have the following problem.I have 2 Networks. each Network has it's own externel Internet-Ip and also Mail-Server.
[code]
Now I want a communication between the two Mailservers with their external Ip-Address.I did a static NAT from ipnt any to int any or also from int routed to int routed, but nothing worked.Packet tracer showed at NAT-Lookup where the externel adress of the second Mailserver is passed: Info Static translate Network1 to Network1
But it should show a translation from network1 to network1-external.Due to Security reasons, I cannot paste the whole config.Under 8.0 I did the same configuration with Policy-Nat and it worked.
View 1 Replies
View Related
Nov 21, 2011
I've been running a cisco asa 5505 for quite some time and it has been running fine, now all of a sudden it starts to renew it's outside dhcp adress like every 2 hours. I dont think it's the ISP since I have another device connected also using dhcp to the same ISP and it doesnt renew itself, it's just the ASA. Rebooting it, makes it pick up an adress straight away. The interface seems to be up, the GUI just reports "no ip adress" and then the ASA get's a new IP after about 10-15 min without one. Pressing the renew IP adress button in the GUI throws an error.
View 10 Replies
View Related
Nov 21, 2011
I have setup ASA 5505 with 2 ISP, named outside (primary) and backup, the scenario is if outside down, then backup will take over, it works now. But it is not working when the primary connection cannot reach the gateway with the interface still up.
Is it possible when the primary connection cannot reach the gateway then backup automatically take over?
My configuration is:
ASA Version 8.2(1)
!
hostname cisco
[Code].....
View 4 Replies
View Related
Nov 14, 2011
I have a Cisco ASA 5505, the problem is I am not able to ping to outside natted interface (ip: 172.88.188.123 and 124 and 125) from inside network I have looked for ASA documentation through the internet and still got nothing.
the config are:
: Saved
:
ASA Version 8.2(1)
!
[Code].....
View 2 Replies
View Related
Aug 9, 2012
I'm trying to set up a Guest VLAN for wireless at a client site, and I feel like I'm missing something small in the configuration, since I can't ping any of the VLAN interfaces from my laptop when the address is statically set to something in the 172.20.100.x range.
I've pasted the configs for the ASA 5505 and the 6 switches below for convenience. Near as I can tell, all should be well. The ports are in trunking mode, the "show cdp neighbors" command returns the proper information, VLAN 100 exists on all the switches, etc.
Code:
ASA Version 7.2(4)
!
hostname ASA
domain-name xxxx.local
enable password Cj3LF.ehxXN3xVkxWcxd encrypted
passwd Cj3LF.ehxXN3xVkWcxd encrypted
[Code] ......
View 17 Replies
View Related
May 7, 2012
How can I achieve this. I am obviously a novice cisco user and really fight my way around. I just want to grant access to a vendor to connect to his vpn. What ports need opened and what else do I need to do?
View 1 Replies
View Related
May 10, 2011
I have a new ASA 5505 and all is working fine, I can CLI and ASDM into it, but just can't ping the inside interface, do I need to enable a feature to make this work somehow?
View 1 Replies
View Related
Apr 23, 2012
I am connecting the inside interface to an upstream switch and therefore will need to assign a static IP address to the inside address as I did below:
#sho int ip brief
Vlan1 123.123.123.123 YES manual up up
I will also use this to manage the ASA. I am having a problem with the network configuration of the inside interface as I can't ping the gateway and/or the in IP of the inside interface.Do I need to add any routes?
View 3 Replies
View Related
Aug 17, 2011
I have an ASA 5505 running 8.2
I used the ASDM wizard (6.3) to set up a remote VPN. After slightly adjusting the wizards configuration the VPN is working well.
Now I need to change the Outside interfaces IP address. When I do that the VPN no longer works. If I change it back to the original value the VPN works again.
What configuration changes do I have to make regaurding the remote VPN after changing the outside interfaces IP address?
View 11 Replies
View Related
May 2, 2013
I was asked to block pings from the internet to the outside interface of our ASA-5505 firewall. I found a post that said to enter "icmp deny any outside", however that does not do it.
I created an ACL to try and do the trick, also to no avail:
access-list outside_in extended permit icmp any any echo-reply
access-list outside_in in interface outside
access-group outside_in in interface outside
View 8 Replies
View Related
Dec 14, 2011
I am trying to configure two ASA-5505 as a failover pair. Software 8.2.5 and ASDM 6.4.5.206 Using the wizard i get to step3 .. then nothing happens. Trying direct in asdm but the only interface i can choose is "--None Unnamed-"
View 1 Replies
View Related
Dec 12, 2011
I have an ASA 5505 that I'm trying to set up a guest network on. I've configured an interface as a trunk and allowed the 2 vlans but I'm not getting any layer 3 to it. The switch connected to it is a 3560 and port is configured as a trunk with the same vlans.
I can't ping the ASA inside interface but I see its MAC address in the swtich's table.
[code]....
View 4 Replies
View Related
