Cisco VPN :: VPN Dropping To International Location ASA 5510
Jul 4, 2011
We have an ASA 5510 and are having issues supporting a client in Europe. After about 5 minutes (sometimes it will last up to 30 minutes) we drop the connection with Reason 412: The remote peer is no longer responding. We are using the Cisco VPN client with the newest software version. We have also tried this on both 32 bit and 64 bit OS's. We have no issues VPNing to any other clients or with anyone VPNing into us. It's only with the client in Europe. We are able to VPN into their US site without any problems. They also claim they have no issues with anyone else VPNing into them.
View 3 Replies
ADVERTISEMENT
Jun 15, 2011
Remote office 1 has an asa 5510 connected to a HQ office which has also an ASA 5510.The HQ office has also a IOS router 2921 with a DMVPN connection an other Remote offices.
Remote office 1 = Cisco asa 5510
Remote office 2 = Cisco IOS router 888
[code]...
View 1 Replies
View Related
Jul 20, 2011
i have a 4Mbps DSL internet connection with 3 PCs connected through a router. 2 are connected wirelessly and the other is wired via an ethernet cable.i noticed that when downloading a file from an international server, the transfer rate on the wireless PCs is 2-3 times slower than on the wired PC. the wireless PC would get about 150-200kb/s, whereas the wired PC can max out to 450kb/s on a single download.however when i download from a local or nearby server instead, the transfer rate on the wireless and wired PCs are the same and can both reach up to 450kb/s per download.i don't understand why the wireless connection is slower to international servers compared to the wired PC. don't they all go through the same router? or am i missing something?my wireless signal is at 54Mbps with "excellent" strength. i also tested the ping results from both the wireless and wired PCs to international servers and they are pretty much the same. there doesn't seem to be any extra latency all PCs are running windows XP SP3- the modem/router is a D-Link 2640B
View 2 Replies
View Related
Apr 19, 2013
Found you on Google and prays that the regulars here will take pity on a former Juniper admin. I've got a brand new shop to handle that is all Cisco including CUCM 8.x and I have zero Call Manager experience. How to enable international calling for a single user
[code]...
brief flow/steps for making sure a user can dial international? I figured it was as easy as making sure their DN CSS had the ability to do so, but apparently not.
View 5 Replies
View Related
Jul 7, 2011
On my country, international bandwidth still expensive. I want to split local and international bandwidth and limit inbound and outbound bandwidth for each ip like this:
IP 10.100.10.11 can use 100Mbps local bandwidth, 1Mbps international bandwidth
IP 10.100.10.12 can use 100Mbps local bandwidth, 2Mbps international bandwidth
I want to use
Router 3825Switch 2960
NB: I have online one internet line.
Was the above equipment can perform functions that I want or need any additional equipment? And Should i use 2 line to achieve my goal?
View 1 Replies
View Related
May 13, 2013
Region : Germany
Model : TL-MR3020
Hardware Version : V1
when visiting Switzerland and Italy with my German SIM card I noticed that roaming is not working very good with the TL-MR3020. The reason is that the internet provider needs to be set in the config, in my case to o2 Germany.When I travel with this SIM card to another country, I roam into other networks.As I cannot what provider is currently active (as o2 has contracts with almost every provider outside Germany) and even if I could see it I have to adjust the settings in the config if anything changes, the satisfaction effect on this trip was not very good.
Also I noticed that sometimes (only sometimes) the setting resetted itself to o2 Germany when unplugging the device, this added some extra negative satisfaction to everything.In my understanding the router should have an auto detection for the currently active network and auto setup for the dialin parameters and everything else. Like every smartphone on the planet. Maybe you can also add a setting where you can enable or disable data roaming to save people money if they do not have a international data option booked.
View 2 Replies
View Related
Jan 23, 2012
I have a Cisco ASA 5510 firewall, my problem is that when the first VPN connections is established everything is good. But when that connections is cancel or terminated due to non connectivity. No one can connect to that firewall through that VPN unless that firewall is restarted.
View 1 Replies
View Related
May 15, 2013
I have our main site using a Cisco 5510 running 8.4.2 code and a remote site using a Cisco 5505 running 8.4.2 code. The main site has a T1 and the remote site is using a DSL connection. About every other day I have to reset the connection at the remote site. The process that I have found that works is to remove the nat statement, clear the cry ips sa and then add back the nat statement. The connection usually comes back up and a few minutes. I am trying to see what is causing this to drop.
View 5 Replies
View Related
Jul 20, 2011
i have a 4Mbps DSL internet connection with 3 PCs connected through a router. 2 are connected wirelessly and the other is wired via an ethernet cable. i noticed that when downloading a file from an international server, the transfer rate on the wireless PCs is 2-3 times slower than on the wired PC. the wireless PC would get about 150-200kb/s, whereas the wired PC can max out to 450kb/s on a single download. however when i download from a local or nearby server instead, the transfer rate on the wireless and wired PCs are the same and can both reach up to 450kb/s per download. i don't understand why the wireless connection is slower to international servers compared to the wired PC.my wireless signal is at 54Mbps with "excellent" strength. i also tested the ping results from both the wireless and wired PCs to international servers and they are pretty much the same.
- all PCs are running windows XP SP3
- the modem/router is a D-Link 2640B
View 6 Replies
View Related
Aug 21, 2011
A recently added outbound rule has left my SMTP communications broken. I have since removed the rule, and had Cisco do some damage control, but it's still dropping some of the SMTP traffic. I get a number of NDR messages each day like the one below:Your message did not reach some or all of the intended recipients. Subject: RE: Christopher, Curt Sent: 8/19/2011 9:38 AM The following recipient(s) could not be reached:
[URL]
on 8/21/2011 9:49 AM
Could not deliver the message in the time limit specified. Please retry or contact your administrator.
<630.SM.Local #4.4.7>
Your message did not reach some or all of the intended recipients. Subject: RE: Christopher Curd Sent: 8/19/2011 9:38 AM The following recipient(s) could not be reached: JWillar@email.com on 8/21/2011 9:49 AM Could not deliver the message in the time limit specified. Please retry or contact your administrator. <630.SM.Local #4.4.7>
I've attached an image of my configuration (ASDM GUI). The part of the image highlighted in green are the SMTP rules. The part highlighted in yellow is another rule that I added about a month ago to block a SYN attack. This rule may be part of the problem because of the order it is in the list. Not sure, though.
I have had two Cisco techs Putty into my ASA to check things out. I think they've done all they can. I wonder at this point if it be wise to just reload the last good running-config I have prior to the Outbound rule being added.
View 13 Replies
View Related
Mar 17, 2011
I have 2 ASA 5510 firewalls at 2 different sites. Both running on version 8.0.4. Users are using an Instant Messaging type of application provided by a local telco here which is able to send and receive SMS using SIP (from the packet capture that I've done).
When users use the IM in site A, they are able to send and receive text messages via the IM from behind the firewall. However, when the users are in site B, users are able to send out text messages but not able to receive them.
I noticed that when I remove "inspect sip" from site-B's global policy map, users from site-B can successfully receive text messages. I have confirmed that it is the firewall that drops the packets as I have captured the inside and outside interfaces of site-B's ASA and I can see the incoming sip "request: MESSAGE" packet on the outside interface but I do not see the packet exiting the inside interface.
I have cross check both firewall configurations, and I do not see anything suspicious commands relating to sip that might cause this issue. Is there any command to troubleshoot why the sip inspection is dropping the sip packets on site-B?
View 15 Replies
View Related
Dec 29, 2012
I can only access a server for my work with the IP I have at home. Is there any way I can be at another location and somehow get to that server with the home IP? I suppose I would have to set up a proxy at home and then connect to it from the other location, so it would make no difference to the server if I'm somewhere else? Am I thinking in the right direction? How would I set that up?
View 7 Replies
View Related
Aug 16, 2011
Bell gives my and IP address and if I reset my modem I will get a new one. Take for example I have an IP address at 7:30pm and decided to reset my modem at 8:00pm. I now have a new IP address, will my previous address, the one I had at 7:30pm, will that one be able to be traced back to me in anyway, can any of my previous addresses be traced back to me in anyway?
View 1 Replies
View Related
Mar 22, 2012
Recently I installed LMS 4.1 accidentally on the c-drive, which, as a result, fills itself with a growing database and associated logfiles. How can I move both items to another drive safely? I allready managed to move configs and downloaded software.
View 7 Replies
View Related
Aug 20, 2011
When I try to upload one file through FTP client to a server, it shows error similar to "you are disconnected by remote host" or something like that. It happens only in work place. When I try the same from home it connects successfully. What could be the problem?
View 1 Replies
View Related
Sep 4, 2011
How do I check IP address of others, when in chatting or playing online game, I could only know that he is Mr. X from YZA country which appears on Screen, But I also know he is using with wrong name and wrong Country name.I would to check his IP as well as his Place?
View 1 Replies
View Related
Sep 16, 2012
in windows 7 pro, While trying to join domain xxxx.local, error message appears. even ping xxxx.local is working...
View 4 Replies
View Related
Feb 13, 2012
refers a location that is unavailable.it could beon a hard drive on this computer.
View 1 Replies
View Related
Sep 5, 2011
Does any one know how i know where my server who is hosting my IP is gepgraphically located?
View 1 Replies
View Related
Nov 3, 2011
Location 1 : how can I go wireless from my DSL modum to the sending antenna in the attic? DSL Router to what hardware to the sending antenna ?
View 2 Replies
View Related
Oct 7, 2012
i would like to know that how can I route two network in two different location over the internet?
View 15 Replies
View Related
Nov 19, 2011
suppose i have 2 hub location and one spoke and i want to config DMVPN between them and want to keep 1 HUB as active and 2nd HUb as passive then how its possible.
View 2 Replies
View Related
Jun 19, 2011
I upgraded wcs to version 7.0.172 and migrated it to new server and ip address. The upgrade was done by install wcs 7.0.172 on new server and restoring a backup. I also upgraded the location appliance from 6.0.101.0 to 6.0.202.0. The wcs can see the location appliance without a problem. The problem occurs when i try to backup the location appliance. The wcs appears to run the backup and completes with a success but i cannot find the backup file in the ftp directory. wcs backup to ftp folder is fine.is a there a way of doing a manual backup the location appliance what logs can i check to see whether the backup is taking place or not?
View 2 Replies
View Related
Oct 13, 2011
We have a RV042. We have a Debian server on the network. I have activated Enable Syslog on the RV042 router and pointed to the Debian Server IP.
Where are the logs for the Router saved on the Debian Server?
View 2 Replies
View Related
May 20, 2012
I am considering running stacked 3750 L3 switches as the edge of the network, which will connect to the ISP. The ISP would hand off two lines with one to each switch and two lines to each client zone. Does running HSRP, running port channels, or running routing protocols seem like the best option for redundancy?
Lastly, will the 3750 provide all the QoS I should need for restricting each client zone's bandwidth both up and down? Could I get away with a lower model and still get these features?
View 13 Replies
View Related
Mar 5, 2012
I'm looking for some input on RRM. I personally have NOT used it in a LONG TIME, since probably the 4.0 days and then very shortly due to massive issues it was causing and admittedly, in part due to my ignorance at the time. So, every since that point, I have always set all my channels and power manually but now feel I am getting to some points where RRM may be required / beneficial. So, I've invested some time and have begun researching and trying to get the ends and outs on it but I'm forseeing a potential issue in myworld anyways and am hoping for some clarification. Lets take the below example:
-WLC5508a and b - (2 100ap license controllers) - these hold the majority of the AP's for the main hospital.Lets say, 140AP's.
-WLC5508c and d - (1 100ap and 1 50ap licensed controllers) - These tend to hold our smaller sites and and buildings, not all connected and some a few miles from each other
-WLC4402a and b - (failover ready)
So, with RRM, I can set setting it up on the 5508A/B with out issue as this is one big large building. However,what about C and D? I suppose I can make them a separate RF Group, but how would RRM respond when it has16 AP's in Building X and then 3 AP's in Building Y 30 AP's in Building Z and sporadic buildings with 1's and 2's? Everything I've read so far, leads me to believe if these devices are separated it probably won't be an issue, however, I just don't want something causing a change in Building Z and Building X be affected because RRM decided it would try to fix it. My point is, I can't afford to have a separate RF Group (meaning separate controllers) for every location.
View 1 Replies
View Related
Aug 23, 2011
i want to find the location of the person who is harassing me in the mails?
View 1 Replies
View Related
Jul 20, 2011
Do you know an easy way to determine the physical location of the device were an IP address is attached? IP Geo location doesn't work well.Is something like this possible? I know it could be if you are the network administrator and know the location of your equipment and stuff.
View 12 Replies
View Related
Feb 24, 2012
How can I share data files with someone in a different location?
I have a particular question, and I get different answers from different tech people and salespersons at Fry's and Best Buy.
Here's my dilemma: my business partner works from home, while I am in the office using a Windows 7 desktop. This desktop contains most of the files. There are many times when he needs to access the files, so I have to e-mail them to him. It's become a distraction and slows down our work process. My question is what's the best solution to remedy this? What's the best way to share files and work independently of each other? Do we need to get a server? We're trying to keep down costs and I've seen that they can run pretty expensive. Do we need a NAS? Can we use another desktop computer as a "server"?
View 29 Replies
View Related
May 3, 2012
I'm essentially looking to extend an existing network in a primary warehouse for our company across a parking lot to a secondary warehouse with no network drops. I need to keep the ability to assign addresses in the existing scheme over to two computers in the secondary warehouse.
View 1 Replies
View Related
Jan 15, 2012
My son ran some program that he didn't know what he was doing and now there is no Network access. As far as I know this is what caused the problem, but I'm not certain. When I tried to reinstall the drivers an errors pops up stating that the drivers couldn't be installed due to "Invalid Access To Memory Location". The networking card is an Intel 82566DC-2 Gigabit Network Connection Adapter. The Networking card is part of the Motherboard. I have the original drivers but they will not install due to the "Invalid Access To Memory Location". Anyhow my son went and bought a new networking card, and it gives the exact same error. I tried uninstalling the networking card in the device manager, but when the hardware is reinstalled, and the drivers are about to install it gives the same error. computer is a Dell XPS 420 with 6 gigs of RAM, an Intel Core 2 Quad CPU Q6600@2.40GHz Also in the Device Manager everything under the Heading Network Adapters has a Yellow Triangle with an Exclamation mark in it. I know that this means that there is an error somewhere. I also want to add that when I checked the Netgear GA311 Network adapter card (this is the new card that my son bought)in the Device Manager it says This Device is not working properly because windows cannot load the drivers required for this device (code 31).
View 9 Replies
View Related
Feb 27, 2012
How to find the location of a device by using mac address of that device.
View 2 Replies
View Related
Oct 28, 2011
Where can I find my wifi password .. .it was set up by a friend for me, and i did not record it at the time. i am using xp/
View 3 Replies
View Related
