I have forgot this technology name, but, I remember it can achive on between Nexus 7000s in two location, and also between two catalyst 6500.Can I ask if it can be done between one nexus and one catalyst 6500?
My boss is asking me to write a batch file or use a utility to monitor the uptime of 16 different ISP accounts that we use across several stores. Most stores have several ISP accounts setup as failover, so they're not always active on our network but the ISP should still be up. He would like this to run from one of our servers. He is suggesting the 'gateway' for the ISP however I am not sure how to find this IP. The tracert utility returns IP addresses which are different than the gateway address in our router settings so I am wary to use those IPs.Which IPs would I ping to monitor the uptime and where would be the best place to find them?
I can get on the internet and surf just fine but when i go to maps or Gas Buddie, or check in with Facebook it says" my device can not be located. Are location services turned on on the device." I have checked on my ipad and location services are on, on everything. I had no problem with the other router I had. I also have a Sprint Airave connected to my internet, but again i had no problem with the other router. The router is definitely faster than my old one and set up was easy but its very frustrating to not be able to find my location.
Is there a free version of a program that would allow to find out an IP address of a person on an IM (gg, msn messenger and others)?Is there a firewall I could use for this? [URL]but it doesn't seem to work...? To access image log you need ... file name, folder and password. For file name do I put extension too? and for folder what do i put?
cant find server name for address...(server) : time out..15 nod is join to server(win2008R2) but new of nod is join for network error : computer name change....Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:WINDOWSdebugdcdiag.txt.An error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain puya.org.The error was: "No records found for given DNS query."(error code 0x0000251D DNS_INFO_NO_RECORDS)The query was for the SRV record for _ldap._tcp.dc._msdcs.puya.orgFor more information
I have a Sylvania 7" mini Netbook and I am connected to my wireless modem. My problem is that I am not able to browse the web any anyway. I keep getting cannot find server or DNS Error Internet Explorer.
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured) DMZ Segment: 192.168.3.0/24 (This is a future deployment) LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
I can only access a server for my work with the IP I have at home. Is there any way I can be at another location and somehow get to that server with the home IP? I suppose I would have to set up a proxy at home and then connect to it from the other location, so it would make no difference to the server if I'm somewhere else? Am I thinking in the right direction? How would I set that up?
Bell gives my and IP address and if I reset my modem I will get a new one. Take for example I have an IP address at 7:30pm and decided to reset my modem at 8:00pm. I now have a new IP address, will my previous address, the one I had at 7:30pm, will that one be able to be traced back to me in anyway, can any of my previous addresses be traced back to me in anyway?
When I try to upload one file through FTP client to a server, it shows error similar to "you are disconnected by remote host" or something like that. It happens only in work place. When I try the same from home it connects successfully. What could be the problem?
How do I check IP address of others, when in chatting or playing online game, I could only know that he is Mr. X from YZA country which appears on Screen, But I also know he is using with wrong name and wrong Country name.I would to check his IP as well as his Place?
Do you know an easy way to determine the physical location of the device were an IP address is attached? IP Geo location doesn't work well.Is something like this possible? I know it could be if you are the network administrator and know the location of your equipment and stuff.
How can I share data files with someone in a different location?
I have a particular question, and I get different answers from different tech people and salespersons at Fry's and Best Buy.
Here's my dilemma: my business partner works from home, while I am in the office using a Windows 7 desktop. This desktop contains most of the files. There are many times when he needs to access the files, so I have to e-mail them to him. It's become a distraction and slows down our work process. My question is what's the best solution to remedy this? What's the best way to share files and work independently of each other? Do we need to get a server? We're trying to keep down costs and I've seen that they can run pretty expensive. Do we need a NAS? Can we use another desktop computer as a "server"?
I'm essentially looking to extend an existing network in a primary warehouse for our company across a parking lot to a secondary warehouse with no network drops. I need to keep the ability to assign addresses in the existing scheme over to two computers in the secondary warehouse.
My son ran some program that he didn't know what he was doing and now there is no Network access. As far as I know this is what caused the problem, but I'm not certain. When I tried to reinstall the drivers an errors pops up stating that the drivers couldn't be installed due to "Invalid Access To Memory Location". The networking card is an Intel 82566DC-2 Gigabit Network Connection Adapter. The Networking card is part of the Motherboard. I have the original drivers but they will not install due to the "Invalid Access To Memory Location". Anyhow my son went and bought a new networking card, and it gives the exact same error. I tried uninstalling the networking card in the device manager, but when the hardware is reinstalled, and the drivers are about to install it gives the same error. computer is a Dell XPS 420 with 6 gigs of RAM, an Intel Core 2 Quad CPU Q6600@2.40GHz Also in the Device Manager everything under the Heading Network Adapters has a Yellow Triangle with an Exclamation mark in it. I know that this means that there is an error somewhere. I also want to add that when I checked the Netgear GA311 Network adapter card (this is the new card that my son bought)in the Device Manager it says This Device is not working properly because windows cannot load the drivers required for this device (code 31).