Cisco WAN :: 1941 Getting Continuously BGP Notification Error
Sep 12, 2012I getting continuously BGP notification error.We are using the cisco 1941 router. i have attached error and configuration.
View 1 Replies
ADVERTISEMENT
Cisco :: Error %Bad OID When Configuring SNMP On 1941
Jan 28, 2013I get the following error:
Router#config t
Router(config)#snmp-server view rttmon ciscoRttMonMIB included
%Bad OID
The same command is accepted on a Cisco 2900 router
Router#show version
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
[Code]......
Cisco AAA/Identity/Nac :: Is There Any SNMP Or Other Notification Available In ACS 5.1
Dec 27, 2010I have not used the ACS5.1 yet so watch out for the easy questions
1) Is it possible to generate report for the users who are inactive for say last 30 days? Customer is looking to audit these users to see if they really need access to any device.
2) Are there any known issues while assigning the priviligaes level to users. In current implementation of this customer users are always logged into priv 1 though they are assigning the priv level of 5. I understand with ACS 4.x we can enable the exec process and assign the priv under user/group policy. What are the configurations that customer might be possiby missing in this case?
3) Is there any SNMP or other notification available in ACS 5.1 where admin can be notified at the time a particulat set of user logs in.
Cisco :: LMS 2.6 Syslog / SNMP Notification?
Apr 3, 2008I am only able to get InfoAlarm messages sent to via email notifications.My switch is sending logs to Cisco Works.Example:
13. 10.10.0.1 10.10.0.1 Apr 04 2008 10:34:41 EC 5 UNBUNDLE Interface GigabitEthernet1/4 left the port-channel Port-channel2 *
14. 10.10.0.1 10.10.0.1 Apr 04 2008 10:34:41 EC 5 BUNDLE Interface GigabitEthernet1/4 joined port-channel Port-channel2
But I only recieve infoalarm messages:
ALERT ID = 00000UE
TIME = Fri 04-Apr-2008 11:04:00 PST
STATUS = Active
SEVERITY = Informational
MANAGED OBJECT = 10.10.0.1
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = 10.10.0.1: Cisco Configuration Management Trap:InformAlarm; 10.10.0.1: Authentication Failure:MinorAlarm;
My switch is setup as:
logging source-interface Loopback0
logging 10.10.100.111
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps syslog
I do not recieve critical or warning syslog messages.
Cisco :: Configuring E-mail Notification In LMS 4.0
Nov 21, 2011I want to configure E-mail fault notification in LMS 4.0. So Where i will configure E-mail settings like username, password, mail server IP address in LMS. We are using e-mail service hosted in gmail. Through this mail service ca we able to use email notification.?
View 3 Replies View RelatedCisco :: LMS 3.2.1- Automated Notification To RME Groups
Oct 23, 2011Have a setup for Cisco LMS3.2.1 which is a recent upgrade, also RME 4.3.2 and CM 5.2.2. Is it possible for the DFM to generate alerts such as email notification to user defined group (subnet grouped). These alerts should be critical in in nature.
View 1 Replies View RelatedCisco :: Configuring DFM 3.2.0 To E-mail Notification?
Oct 17, 2011I'm needing to be able to send e-mail nofigication when one of our network devices isn't able to be access. I have looked at the DFM configuration but I'm a little confused to how to set this up so that we don't get inundated with to many e-mails.
View 1 Replies View RelatedContinuously Lagging On And Off?
Oct 17, 2012Our internet has been acting strange the last couple days, it will just disconnected for like 5-10 seconds, then come back. Happens anywhere between every couple minutes or every 15-30 seconds. There are two computers on the network, and it happens to both computers at the exact same time.
View 3 Replies View RelatedCisco WAN :: 7600 - RSP Reload Continuously?
Jan 14, 2011Router with 2 RSP RSP720-3C-GE & Image: c7600rsp72043-advipservicesk9-mz.122-33.SRE2.bin We are getting the message as
------------------ show version ------------------
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE2, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code]....
Show log is attached & we are getting %DHCPD-4-DECLINE_CONFLICT: messages constantly.
Cisco WAN :: 887VA-W-E-K9 AP Reloading Continuously
Jan 26, 2012I've got a brand new C887VA-W-E-K9 that is up and running on a BT VDSL connection. That side of it is fine... But the integrated AP module on it keeps reloading.. I can be on the AP console reading the config via 'sh run' and suddenly it'll be loading the OS again... There's no errors logged, no errors on the console or anything... (I also have yet to get the radio working, it starte dbefore I'd finished the config).
It doesn't seem to be anything I'm doing as if I just leave the console, it'll just sit there... reloading every few minutes... (Although sometimes it seems to stay up for longer).
The console just looks like this. WHich is taken from listing the running config and while sitting at the --more-- prompt... Bang...
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
[Code].....
Cisco :: LMS 4.0 Fault Notification Groups Setting Up
Sep 11, 2012I am trying to setup Fault Monitoring on LMS 4.0. When I try to create a Fault Notification Group no devices are listed. They appear to be listed in all other places so I am at a loss as to explain why they are not appearing.
View 7 Replies View RelatedCisco :: 6500 How To Send E-mail Notification
Nov 29, 2012How to configure LMS to send E-mail or Alert Notification when the CORE SW <6500> and CORE ROUTER <ASR 1004> goes down or it Has some Critical issues.
View 2 Replies View RelatedCisco VPN :: ASA5520 - SSL Password Change / Notification
Jul 5, 2011Has any one got a working setup for SSL VPN users in regards to notification about password is going to expire and then providing the VPN user the opportunity to change password during the VPN login process, involving ASA5520 - ACS Radius server - Active Directory
Our VPN users are connecting with Cisco Any Connect VPN Client V.2.5.3046 to a ASA5520 running 8.4(1), all user validation is handled via Radius though a Cisco ACS 5.2 server, which in turn validates the users up against MS Active Directory.
For the relevant connection profile on the ASA, the options Advanced / General/ Password Management / Enable password management has been selected together with the Notify user 14 days prior to password expiration, as mentioned its connecting to a Cisco ACS Radius server with MSCHAPv2 enabled on both the ASA and ACS.
On the ACS server under users and Identity Stores > External Identity Stores > Active Directory we have a successful bind to the AD, the values End User Authentication Settings > Enable password change has been selected.
Just to make sure the password notification function is working in the first place I change the ASA5520 AAA Server group to use LDAP instead of Radius and configured a direct path towards one of our domain controllers, sure enough when the user logged in he got a notification about the password would expire in xx days and then provided with a option to change the password right away or just connect with the current password.
The thing is I don’t want to just use LDAP for VPN authentication, I have quite a expensive setup on the ACS servers with unique ACL's for various group of employees and especially for external consultants, I also use the ACS for customization for webpage and resources when Web VPN is used.
Can it really be so that password expiration notification only works using LDAP, and if this is really the case, is there any way to configure Dual Authentication, so I could first validate the user against LDAP and next against the ACS??
(Side note: I tried to configure the ASA to use LDAP as normal Authentication and then the ACS as Authorization, but it failed, first off because the ASA started to use PAP/ASCII against the ACS and even if I allowed that, it seemed like the ASA wasn’t parsing the users password onwards, with the result that ACS failed and the user account ended up getting locked out in the AD).
Cisco AAA/Identity/Nac :: How To Have Email Notification When Rule Hit On ACS (5.1)
Aug 1, 2011Is it possible to have email notification when a rule is hit on the ACS(5.1)?
Ive had a look around and cannot see any options, the server team seem to think its not possible to have this triggered from AD either on a side note, where are the SMTP settings on the ACS?
Cisco :: DFM 3.0.5 Notification Groups No Devices Found
Nov 4, 2012I'm in the process of reconfiguring our DFM module have some significant network changes. I've reinitialized the modules databases and manually imported a test group of routers into DFMs device management. The devices have been found and have a known status in the device summary.When I begin the process to create a notification group for email based notifications, the notification group selection window shows no devices available. If I manually search for the devices, I am able to find them, but after selecting them, I'm given the following error:"The devices contaminated in the subscription are no longer found in the inventory"I've confirmed the devices existence in CS and RME.
View 6 Replies View RelatedCisco Routers :: Notification Of IPS Updates For RVS4000
Aug 15, 2011We have the RVS4000 and have IPS turned on. How can I be notified (email would work) when updates to the IPS signatures are available, so I can keep our IPS signatures current?
View 3 Replies View RelatedInternet Continuously Disconnecting
Dec 24, 2011Happens every few hours, but is fixed by reconnecting my router. Although this is inconvenient because I run an IRC chat and a small web server. I'm not sure if those would cause such a problem, but I hope not
View 14 Replies View RelatedSharing :: How To Attach Notification To File
Nov 25, 2011I'm on a network in an office where each person's computer has different specs, some PC, some Mac. We all share files off a common drive, either using it directly, or, copying it to our local machine to work on it then return it to the shared drive. I'm looking for a way to attach a notification to a file to let everyone know it has been "signed out" by someone, to avoid two people taking the same file at the same time.I looked at a simple program called Shediko Badges, which puts a badge over the icon, by right clickingon the file and choosing a badge from a menu, and undone just as easily, however, it can't be seen by everyone else on the network. This is the sort of thing I'm looking for, simple, cheap or free, that somehow marks a specific file without changing the name. It could be a colour change, an icon change... whatever, ideally with several options, for example where a different colour could be assigned to each person in the office, similar to the coloured labels on a Mac.
View 7 Replies View RelatedNetwork Notification Icon Not Displaying?
Jan 30, 2011I lost my internet connection icon in windows 7. When connected, the network notification and icon appears at the taskbar and displays how many bar signal the network has and it was working even earlier this afternoon here. I just used my wired connection for a short time and as i stopped using it then i discovered the wireless connection bar signal is lost, all for me to see a ' Round Star' in the bar side of my internet icon. Am connected to the internet but i can't my connection signal and i tried to restore my computer but after i do that i get a dialog say 'The system restore did not completely succesfully because an anti-virus is running on this computer and has prevented it from changing the settings, turn off anti-virus ans try again' but i have no anti-virus program on my PC.
View 5 Replies View RelatedDynamic Ip Notification Tool For Windows
Aug 30, 2011Does any know of a Windows utility than can send an alert via e-mail to me when my dynamic IP address changes?
View 5 Replies View RelatedCisco WAN :: 3845 Router Which Is Continuously Rebooting
May 2, 2011I have 3845 Router which is continuously rebooting; console output is attached.
View 8 Replies View RelatedCisco WAN :: 1841 / CF And AIM Lights Are Glowing Continuously?
Aug 18, 2012I have got a cisco 1841 router. i can't see anything when connected to hyper terminal application. I can't ping to any interface of the router. The CF and AIM lights are glowing continuously and every light also glows near FA interface when cable connected on the interfaces.
View 1 Replies View RelatedCisco VPN :: ASA 5520 - Notification Prior To Session Timeout?
Sep 1, 2011Per PCI & company policy all VPN users have a 12 hour session limit. They will disconnected after 12 hours regardless of use. Is there any way to send a message prior to the 12 hour limit to warn the users that they will be disconnected in x minutes? I'm running SSL VPN on a ASA 5520 ver 8.4(1)
View 1 Replies View RelatedCisco Wireless :: WCS 7.0 - Northbound Notification Receiver Unreachable
Dec 12, 2010I'm trying to configure an snmp notification reciever on WCS 7.0, so that critical alarms get reported to our central console. Following the configuration guide I was able to add the reciever as northbound, but after adding it I get an alarm saying that it is unreachable by WCS so all alarm notification will be suspended. I have tested snmp and ping connectivity between the WCS box and the notification reciever and it works ok, is there some other traffic that I might be missing?. I've seen some packets going from the WCS box to TCP port 7 on the reciever, which as far as I know is the echo service, is that what WCS uses to test connectivity?
View 7 Replies View RelatedCisco AAA/Identity/Nac :: Secure ACS 5.3 - Receiving An Alarm Notification?
Jul 19, 2012We are using version 5.3 with patch 5. Incremental and full backup are configured but every day we receive an alarm notification.
View 7 Replies View RelatedContinuously Failing ISP / Internet / Network?
Oct 7, 2012I have recently moved in a new apartment. At the building there is something like a centralized internet. There is a huge machine which is connected to every apartment of building via a cable modem(Netsys nh-300sp). Here is an image of system. And when I first came to apartment they gave me a username and password which I made login when i firstly opened a page on safari. When I plug in an ethernet cable to my macbook-air it connects and everything s good for a moment then it starts to kick me out randomly and continuously. When I look to Network Diagnostics: ISP is red, internet and network are yellow.I tried also using a manual DHPC address, but then ISP is green but Internet and server are red or yellow. I cant even reach to modems admin panel, maybe because of the system of building.
View 1 Replies View RelatedInternet Disconnects And Resets IP Continuously?
Nov 5, 2012my internet will disconnect sometimes for a split second, for a few minutes or for hours at a time. My boyfriend and I have directly connected his computer to the modem, and the internet is working. I have also called our ISP and asked if there are any problems on their end, and our modem is working fine with no issues. So we had come to the conclusion that our router was at fault. It was a Linksys E1500, we investigated online and found that many people had the same problem and it was solved through buying a new router. We have since bought a new router a D-link N150, it worked for a week and a half, but now our internet is back to disconnecting randomly throughout the day. We have tried resetting the router back to factory settings to an avail.
View 1 Replies View RelatedMAC Wireless Connection Continuously Times Out
Mar 12, 2011My nephew's MAC continuously times out when trying to connect to my wireless connection. Details are:
ISP=Orcon
Modem/router=Dynalink: RTA1025WE
No other network equipment.
Wireless connection
Authentication=WPA-PSK
Browser=Firefox
MAC Book Pro, OS=10.6.2
D-Link DCS-942L :: Video Clip Notification (MP4 Instead Of AVI)?
Feb 11, 2012Can the DCS-942L be configured to send the "Video Clip Notification" email video attachments as MP4 as opposed to AVI? The iPhone can not play AVI files, so I'm forced to use the snapshot feature which misses a lot of the motion. I have a Linksys WVC80N that allows me to send video email attachments in MP4 format that works great, but I would like to have this ability on my two D-link DCS-942L cameras as well. If there is no way to send MP4 video email attachments... is this something that could be added as part of a firmware upgrade?
View 4 Replies View RelatedCisco :: VM Running Prime Infra 1.2 - Continuously Rebooting?
Dec 10, 2012My VMware virtual machine running Prime Infrastructure 1.2 is continiously rebooting.VM console is generating logs as shown below.
View 1 Replies View RelatedCisco WAN :: 4500 Standby Supervisor Continuously Rebooting
Feb 26, 2012We seem to be having an issue with one of our 4500's, our standby supervisor is continuously rebooting: [code]
I have replaced the supervisor board but the issue still persists. [Code] ......
Cisco Application :: ACE4710 Started To Continuously Reboot?
Mar 3, 2010one of our 2 ACE boxes in FT group suddenly reboot-ed from active state and now it continuously reboots with the following error:
insmod: error inserting '/isan/bin/klm_octeon_device.klm': -1 No such deviceerror inserting /isan/bin/klm_octeon_device.klmDaughter Card Not Found. Rebooting..INIT: Sending all processes the TERM signal...
Cisco :: 3750X - Configure Some Notification To Send Message Via SMTP
Mar 12, 2012Cisco works LMS 4 is very complicated tool for me and it is very hard to configure any cisco device what I need to monitor.Currently I have 3750-X configured, properly discovered and added to DCR. I would like to receive SMTP messages(mail) from LMS if some event occurs. For example when link UPDOWN occurs or when LOGIN_FAILED occurs and so on. I tried to configure it in Monitor > Monitoring Tools > Fault Monito, but without siccess. LMS tell me that there are no devices available.How can I configure some notification so it is able to send me message via smtp?
View 0 Replies View Related