Cisco WAN :: 887VA-W-E-K9 AP Reloading Continuously
Jan 26, 2012
I've got a brand new C887VA-W-E-K9 that is up and running on a BT VDSL connection. That side of it is fine... But the integrated AP module on it keeps reloading.. I can be on the AP console reading the config via 'sh run' and suddenly it'll be loading the OS again... There's no errors logged, no errors on the console or anything... (I also have yet to get the radio working, it starte dbefore I'd finished the config).
It doesn't seem to be anything I'm doing as if I just leave the console, it'll just sit there... reloading every few minutes... (Although sometimes it seems to stay up for longer).
The console just looks like this. WHich is taken from listing the running config and while sitting at the --more-- prompt... Bang...
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
[Code].....
View 6 Replies
ADVERTISEMENT
Aug 30, 2012
difference of CISCO887VA-K9 and CISCO887VA-SEC-K9.I thought it because of the Advanced Security and Advanced IP Licenses, but it isn't, I've got the -SEC- Version now just with the Advanced Security license. So I asking myself why I bought the more expensive CISCO887VA-SEC-K9 if I have to buy the additional Advanced IP Services licenses extra..
View 14 Replies
View Related
May 14, 2011
I have been confronted with an issue recently with two of my 3640 series router reloading endlessly.Initially i thought it could be a matter of MEM not well seated, but unfortunately it wasn't the problem.i have attached the gibberish produced when these routers are booted up.Be informed as well that these devices are loaded with max MEM.
View 1 Replies
View Related
Apr 22, 2012
So since my web auth cert is expiring I got it renewed from VeriSign and they sent me back the file. Do I need to again combine the "myprivatekey.pem" file and the new one that I got and then load it on the WLC? Can't find any guidelines and instructions from Cisco on this. Or do I need to go through the whole regenration of CSR process again etc?
View 3 Replies
View Related
Sep 29, 2012
I have problem with my Cisco 6506E switch.when it reloads its going to RMON mode, If I give Boot command I. The RMON, then only it will get load with the iOS image.
View 2 Replies
View Related
Oct 17, 2012
Our internet has been acting strange the last couple days, it will just disconnected for like 5-10 seconds, then come back. Happens anywhere between every couple minutes or every 15-30 seconds. There are two computers on the network, and it happens to both computers at the exact same time.
View 3 Replies
View Related
Jan 14, 2011
Router with 2 RSP RSP720-3C-GE & Image: c7600rsp72043-advipservicesk9-mz.122-33.SRE2.bin We are getting the message as
------------------ show version ------------------
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE2, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code]....
Show log is attached & we are getting %DHCPD-4-DECLINE_CONFLICT: messages constantly.
View 6 Replies
View Related
Dec 24, 2011
Happens every few hours, but is fixed by reconnecting my router. Although this is inconvenient because I run an IRC chat and a small web server. I'm not sure if those would cause such a problem, but I hope not
View 14 Replies
View Related
May 2, 2011
I have 3845 Router which is continuously rebooting; console output is attached.
View 8 Replies
View Related
Sep 12, 2012
I getting continuously BGP notification error.We are using the cisco 1941 router. i have attached error and configuration.
View 1 Replies
View Related
Aug 18, 2012
I have got a cisco 1841 router. i can't see anything when connected to hyper terminal application. I can't ping to any interface of the router. The CF and AIM lights are glowing continuously and every light also glows near FA interface when cable connected on the interfaces.
View 1 Replies
View Related
Oct 7, 2012
I have recently moved in a new apartment. At the building there is something like a centralized internet. There is a huge machine which is connected to every apartment of building via a cable modem(Netsys nh-300sp). Here is an image of system. And when I first came to apartment they gave me a username and password which I made login when i firstly opened a page on safari. When I plug in an ethernet cable to my macbook-air it connects and everything s good for a moment then it starts to kick me out randomly and continuously. When I look to Network Diagnostics: ISP is red, internet and network are yellow.I tried also using a manual DHPC address, but then ISP is green but Internet and server are red or yellow. I cant even reach to modems admin panel, maybe because of the system of building.
View 1 Replies
View Related
Nov 5, 2012
my internet will disconnect sometimes for a split second, for a few minutes or for hours at a time. My boyfriend and I have directly connected his computer to the modem, and the internet is working. I have also called our ISP and asked if there are any problems on their end, and our modem is working fine with no issues. So we had come to the conclusion that our router was at fault. It was a Linksys E1500, we investigated online and found that many people had the same problem and it was solved through buying a new router. We have since bought a new router a D-link N150, it worked for a week and a half, but now our internet is back to disconnecting randomly throughout the day. We have tried resetting the router back to factory settings to an avail.
View 1 Replies
View Related
Mar 12, 2011
My nephew's MAC continuously times out when trying to connect to my wireless connection. Details are:
ISP=Orcon
Modem/router=Dynalink: RTA1025WE
No other network equipment.
Wireless connection
Authentication=WPA-PSK
Browser=Firefox
MAC Book Pro, OS=10.6.2
View 2 Replies
View Related
Dec 10, 2012
My VMware virtual machine running Prime Infrastructure 1.2 is continiously rebooting.VM console is generating logs as shown below.
View 1 Replies
View Related
Feb 26, 2012
We seem to be having an issue with one of our 4500's, our standby supervisor is continuously rebooting: [code]
I have replaced the supervisor board but the issue still persists. [Code] ......
View 6 Replies
View Related
Mar 3, 2010
one of our 2 ACE boxes in FT group suddenly reboot-ed from active state and now it continuously reboots with the following error:
insmod: error inserting '/isan/bin/klm_octeon_device.klm': -1 No such deviceerror inserting /isan/bin/klm_octeon_device.klmDaughter Card Not Found. Rebooting..INIT: Sending all processes the TERM signal...
View 10 Replies
View Related
May 11, 2011
My internet connection is continuously transmitting and receiving, even when there is no application running! is there any way to find out what is being transmitted or received and how to reset the connection?
View 3 Replies
View Related
Jan 17, 2012
I have a D-Link DWA 510 and it's been perfectly fine, no hassles. Until about a week ago. Since then, not a lot has changed in my computer except for a new PSU/CPU and Keyboard and Mouse. Nothing has changed about the router, it's just the card that's messing up.
What I've tried:
Reinstalling the drivers
Updating
Rolling Back
Changing PCI card position
I'm up for trying many things. I just want some reliability until Saturday/Sunday when I buy my new card.
View 8 Replies
View Related
Oct 26, 2012
The send light is steadily blinking. Yesterday I disconnected the cable into my main cable box connected to my tv, so I could move it into a new tv stand I bought, and ever since then I get no Internet connection (tv cable works fine.) I cant see how that made my Internet go out, but maybe it did. I checked connections on both ends and all cables are tightly secured.Here is a log of my modem, I found out how to get it through this site.[CODE]
View 5 Replies
View Related
Apr 26, 2011
My WRT400N wireless router continuously disconnects and I have to keep restarting it. I have tried to download an update for it, but once i download the zip file and try to open it, it just keeps duplicating the file.
View 1 Replies
View Related
Apr 30, 2011
the router is functional, however the green light has never blinked like it is now.
View 1 Replies
View Related
Feb 16, 2011
I have a Toshiba Satellite that I got almost a year ago. I lose connection a lot. I have to often enable the adapter because it has been disabled or when troubleshooting it resets the adapter. We have several other computers on our network that work fine. This is the only one with Windows 7. The router is Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0.
View 3 Replies
View Related
Jun 27, 2011
I have a dell 1558 studio with windows seven. my router is a linskys. My laptop will connect to the internet and stay connected but every few minutes or so it will drop out of connection and then automatically reconnect.
View 1 Replies
View Related
Jul 21, 2011
I have bought a DIR 615 router one week ago and although my main goal was to use it at better wireless speeds (using the N feature) it turned out that I can only use it as a normal router. The hardware version is H1 and the software ver is 8.0.
The problem is that whenever I turn on the wireless with default configuration, the router immediately starts resetting by itself over and over again. Sometimes it doesn't reconnect, but as soon as I try to connect to it using one of my laptops, it immediately starts restarting. After it starts the continuous resetting, it is very hard to reset its settings using the hardware reset button, because I don't even have time to press it for 10 seconds. If the wireless is turned off, everything works.
View 3 Replies
View Related
Jun 15, 2011
I have a WAG160n v1 annexA with lateset firmware which was working good. Until yesterday, when I founded continuously resetting. I starts and then power led switches off and all internet leds switch on and the keeps repeating the same thing. I tried resetting by pressing the button for 5 sec, the power led turned red and then started blinking red. Left it for some time (1min) and then powered off the modem and again powered it on. Nothing change. I connected it to my laptop and then I powered off both of them and powered them on, first my modem and then my laptop.
View 3 Replies
View Related
Mar 2, 2009
latest OS release for this Model number: WS-C3524-XL-EN switch. I currently am running Version 12.0(5)WC17
The reason is, I'm having some issues installing some HP PC's connected to this switch. The nic card on the HP flaps up and down, disconnects/ reconnects continuously. The only way I get it to stop is to bring down the speed on NIC or the switch port to 10mbs.
If I add a nic card and disable the system board nic all is well.The HP rep says that Cisco has a patch for this unit. Any recent patch or what the latest OS is for this switch?
View 14 Replies
View Related
Jul 31, 2011
I have a WAG120N, its nearly dead,I tried resetting it many times, it still wouldn't work. The WiFi LED blinks continuously and uniformly. There is no WiFi, no access to router, the only thing that is working is the switch.
View 4 Replies
View Related
Feb 27, 2012
had a firmware update error model WNR3500
View 1 Replies
View Related
Dec 20, 2008
I've spent several hours of my life trying to rectify this silly problem without peace. Maybe one of you can enlighten me. I've got a Win98 laptop and have loaded the driver specified from the Linksys website. The software from the website under "Version 1" downloads a file entitled "...driver utility v3.1." I've installed and uninstalled it 3 times with restarts inbetween. Each time Device Mngr shows it is installed correctly but the "inactive" status persists. I get a "Power" light indicator but never the "Link" indicator on the adapter. I do not have a firewall or any other software that would interfere with the access point I have at my home (which works just fine with my Vista laptop). Furthermore, the wireless router is not secured either, so it is wide open and broadcasting. But as I said, the adaptor isn't even showing as "active" so all that stuff is moot I guess. I can not upgrade the laptop to another OS, it is an antique from 1999 and can't cut the mustard with the RAM and processor speed it has. Besides, it should work just fine with Win98 anyway.
View 4 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Dec 28, 2012
My OS is Windows 7 and I'm trying to setup my wireless g gaming adapter (F5D7330 v.2) and the install software continuously stops working once it says to plug in the adapter into the AC wall outlet.
View 2 Replies
View Related
Mar 3, 2012
Have they changed the poe requirements for this router? This model seems to be a seconed gen 887 with internal wireless, fanless and instead of there being a second 2 pin power socket for the poe option there is just 1 power input with the text under is saying. 'poe option requires 5a power adapter' I have purchased the 800-IL-PM=2 to delivery poe on the first 2 ports from this document [URL]While the daughter board does fit in the stand off pegs are too short and the power adapter is incompatable.
View 9 Replies
View Related
