Imagine on a 3845 router, I need to bond 2xDS1 circuits (for a Metro Private Line, point-to-point circuit). I have done that multiple times for NxT1s with MLPPP - OK.So my question is, is the card below and MLPPP valid for 2xDS1? I read all the product specification and it always mention "T1", but it does not officially say I can configure DS1.VWIC-2MFT-T1-DI#Two-port RJ-48 multiflex trunk - T1 with drop and insert
View 1 RepliesIs there any physical or technical diferrences between PWR-3845 AC/2 and PWR-3845 AC? We are trying to order replacement parts and wondering if PWR-3845 AC is for one power supply and AC/2 means you get two with one order?
View 1 Replies View RelatedIs there any physical or technical diferrences between PWR-3845 AC/2 and PWR-3845 AC? We are trying to order replacement parts and if PWR-3845 AC is for one power supply and AC/2 means you get two with one order.
View 1 Replies View RelatedIs Ciscoworks LMS 3.2 supports WISM 2?
View 3 Replies View RelatedWhich version of IOS for the 2621 supports NAT?
View 1 Replies View Relatedthe max amount of AP's one 5508 WLC can support ?
View 4 Replies View RelatedI have 2611xm router with 2 fastethernet ports. Now I want to install NM-1FX-TX module. I just want to conform that does 2611 supports NM-1FX-TX module. I am using this device for lab purpose. I am using latest IOS"
View 2 Replies View RelatedI am interesting is ESW-520-24-K9 switch supports GLC-LH-SM SFP? In official data sheet there is no information about that. it is supported and I am interesting if it is true ?
View 5 Replies View Relatedany 3725 IOS image that supports the ip sla command? I tried searching for it using the feature navigator but i received something like "15T" and I'm not too sure what that is.
View 4 Replies View RelatedWe are using Cisco 1941 Router as CPE where we wanted to trap CPU, Memory & ISYSTEM MIB. The same we are achiveing using SNMPV2 but when we tried using SNMPV3, there is no response for these MIBs.
We tried to configure SNMPV3 using below Link but still there was issue. There was response fr [URL]
Wanetd to know SNMPV3 MIB are supported for Cisco 1941 Router IOS Code universalk 15.2(3)T1 & Data License. When we tried using Cisco IOS MIB Locator, we are not able to see any MIB for SNMPV3. whats is that mean. Does this Platform + IOS Support SNMPV3 or not.
Below is the Snapshot from Cisco IOS MIB Locator for said image.
[Code]......
I have a small network of about 12 Mac's running OS X, about 20 or so iOS devices and a OS X Server. Currently i have a Cisco SRP547W which works fine when we're all wired in, however we have connection issues when trying to access the server over Wi-Fi. I'm lead to believe that this could be a result of the lack of support for Bonjour within the router. What might be a solid alternative?
View 1 Replies View RelatedWe have a 10 MB Internet Link coming from our ISP through there MUX.The link is connected to our Router 1841.Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(3i), RELEASE SOFTWARE (fc2)From past few weeks we are facing link speed issues. It gives not more then 1-2 MB.The ISP is telling there is no Problem in there network. We have kept Default Routing pointing towards there IP.We want to know whether our router will support 10MB Internet Link or Not.
View 9 Replies View RelatedWe are using the Cisco ACS 5.2 for AAA to manage our network devices. We plan to migrate all our edge's devices to IPv6 soon. Can or when the Cisco ACS 5 support IPv6 address?
View 1 Replies View Relatedi have two cisco 2800 routers , and i have three different networks , so can cisco routers supports more than one private network example,My First location i have one public connection of 200.100.100. 1 and private network of 192.168.1.x network and the second router i have one public connection of 200.100.100.10 and two private networks of 192.168.50.x and 192.168.60.x , So can i route my first location to this two different networks , because my router have only two FastEthernet connection , so how it's possible or not.
View 3 Replies View RelatedI have some questions about the size of the certifcates in ACE module (ACE20). Reading the following link: [URL]
I can verify this text: 4096 (high security, level 4) - For software release A2(2.4) and later in the ACE module and software release A3(2.6) and later in the ACE appliance, you can use 4096-bit SSL certificates in chaingroups and authgroups. You can also import public certificates and keys that are 4096 bits in length.
We intend to use a certificate (CA) with keys of 4096 bits and according to the text of wiki, it's possible.
But if I check the guide [URL]
Somebody that already use certificates with 4096 bits in ACE20 module?
whether Cisco GSS 4492R supports NTP authentication. GSS Software version : 4.1.0.0.28
View 1 Replies View RelatedWhen we say that ASA 5505 supports 10k connections does it mean that we can have 10k connections to the different websites?
View 5 Replies View Relatedi have VWIC2-2MFT-T1/E1 card installed in 2821 ISR router, ios (C2800NM-SPSERVICESK9-M), Version 12.4(25d).does this IOS supports unframed G.703 and also does this card VWIC2-2MFT-T1/E1 supports unframed????
View 9 Replies View RelatedIf one has internet and phone service through Cable, I know you can buy your own modems and routers, but is there a particular kind of modem you'd need to get to support VOIP for the phone?
A friend of mine has phone through Cable and her internet and phone suddenly stopped working, although her TV service is fine. We are thinking that maybe the cable company's modem is bad, so she wants to buy her own modem, but we're not sure if it needs to be a particular type of modem. I've looked around for her, but haven't found anything in modem specs stating they support VOIP. Does it matter? Or can you buy any cable modem?
We already looked at the cable providers website to see their supported modems, but they are all the same brand as the one she has that doesn't work. She already has a wireless router, which she will plug into the modem she buys, so we're only looking for answers regaring a modem.
Today I read a comment on a review of DIR-615 [URL], saying it supports only 32 concurrent connections where as other routers support more than 200
View 6 Replies View RelatedIs there an ethernet WIC/HWIC that supports NAT for the 2811. I have one 4 port 10/100 card but it doesn't support NAT overload.
View 5 Replies View RelatedIs there a new software version that supports full ipv6 for wan and lan? What may be the replacement for rv016 that supports full ipv6 and may have a density of 8-16 10/1000 ports?
View 3 Replies View RelatedWe have a Cisco 7206 VXR Router with NPE-G2. As everybody aware that, It has got 3 x Gigabit Ethernet Ports on this. We would like to add Two more Copper Gigabit Ethernet Interfaces. The Configurator does not show any options to add that.Now we have a doubt that, Does this 7206 VXR support how many Copper Gigabit Ethernet Interface ?. There is no clear answer available in the Data Sheets.
View 2 Replies View RelatedWhat is the max number of policies can ASA 5525X supports ? I dont find it in the datasheet.
View 5 Replies View RelatedDoes PI Supports VMware ESXi 5.1 freeware version?
View 1 Replies View RelatedI work for a non-profit agency and a donor gave us a generous donation of used Cisco equipment. One of the items is a SM-VAM2+. We tried it in a 7206VXR chassis with a NPE-G2 running 12.4(24)T6 and the router keeps barking that the SM-VAM2+ is not supported in the chassis. We have done searches on the Cisco web site and Google and there is no information regarding the SM-VAM2+ at all (all of the references are for the SA-VAM2+).
The question is if the SM-VAM2+ is supported on the 7206VXR with another version of IOS or what router supports the SM-VAM2+?
I need to confirm how many queues actually supports the switch SG500X?. In SG500X_data_sheet.pdf document (pg. 8) say they have 4 hardware queues (8 future) !
View 2 Replies View RelatedDoes ASA supports NAT in bridge mode? especially the 5580 series x??
View 1 Replies View RelatedWhat is the minimum platform that supports GETVPN over DMVPN?
I have been looking around cisco website but couldn't find a document with the supported platforms.
We have branch offices with Cisco 861 routers and i would like to know if we could use GETVPN with these routers.
I would like to know if the ASA 5520 BUN K9 supports the data compression on VPN IPsec.
View 2 Replies View RelatedDoes ASA 9.x code supports Change of Authorization (CoA). I have looked through the release notes and can't find anything.
View 1 Replies View RelatedDoes SRW248G4P supports dhcp relay?I don't see any option for it with firmware version 1.0.2.
View 1 Replies View RelatedIs cisco version 12.2.58(EZ) supports BGP ORF feature (RFC 5291 and RFC 5292).
View 7 Replies View Related