we have a problem with the ES+ card. After an IOS upgrade the card does not want to come online.The IOS version is 12.2(33)SRE4, it is the same problem with 12.2(33)SRE5.
I googled but could not much info. Only about %PM_SCP-SP-1-LCP_FW_ERR and the document said that the card should be inserted in an another slot, but it did not work. [code]
I am facing problem with 7600-ES+20G3C card / Any system reset will change the system operating mode
View 2 Replies View RelatedIs the 7600-SIP-400= & SPA-1XOC12-POS still supported in the old models of the Cisco 7609 i.e.;
CISCO7609SUP32-GE-3B7609-S323B-8G-RS7632ISK9-12218SXF
I have a router CISCO 7609-S with two RSP 720 engines,and other cards are 7600-ES+20G3C,7600-ES+40G3C.One day it has a error cord " %XDR-6-XDRIPCNOTIFY: Message not sent to slot 4/0 (4) because of IPC error queue flush. Disabling linecard. (Expected during linecard OIR)" and the card resets.Cisco TAC told us it is a bug which is CSCtj05576.and I want to upgrade the ios from c7600rsp72043-advipservices-mz.122-33.SRD4.bin to c7600 rsp 72043-advipservices-mz.122-33.SRE5.bin.Now I want to know this:1, Is it right to upgrade to this new ios? Is the new ios suitable for the cards?2,I want to know the right way to upgrade ios in two engines.
Atfer I copy the new ios to the master engine and slave engine,and then change the bootvar and save config.Is it auto copy the config to de slave engine?Atfer do this ,I want to know how to apply the new ios,Does it reload the slave engine first and then force-switchover the master engine to slave engine. Or Atfer do this,I reload the router on active engine directly?
I need to know if upgrading Cisco IOS on 7600 series router is possible. From 12.2(18)SXF --> 12.2(33)SRC, i need this because SRC supports Lawfull Intercept.
specification of router is 7606
slot 1 - WS-X6708-10GE
slot 1/0 - WS-F6700-DFC3C
slot 4 - WS-X6408A-GBIC
slot 6 - WS-SUP720-3B
slot 6/0 - WS-F6K-PFC3B
slot 6/1 - WS-SUP720
I recently bought a new Dell Inspiron 7600 pc running on windows 7 home premium and to enable access to our wireless internet I installed a Realtek 8185 wireless pci adaptor. It has worked fine (although not without the occasional blip) but recently it has stopped working. I could connect to our wireless network but connection came with a small exclamation mark on the wireless connection icon in the system tray. I tried reinstalling the most up to date drivers I could find on the realtek download website and this has removed the problem of the exclamation mark with the wireless connection claiming it now has internet access. However the internet is now so slow (vastly slower than before these problems began) I get timed out errors whenever I try to access any web pages. I have ruled out the router being an issue as my two housemates' computers are working just fine.
View 1 Replies View RelatedI have recently upgraded a customer ASA5510 to version 8.3.
After upgrade web access etc is working fine however VPN is down. The config looks very different after the upgrade plus what looks to be duplicate entries.
I suspect its an access list issue but I'm not sure.
hostname ciscoasa
domain-name default.domain.invalid
enable password NvZgxFP5WhDo0hQl encrypted
[Code].....
When we had 8.2.2, we bought a Mobile license to make the iPads running AnyConnect happy. I applied it, but since we'd only purchased one license, it broke failover. 8.4 lets you share tracking licenses, and since we were planning on the upgrade to 8.4.x anyway, I figured no big deal, I'll get that straightened out when I do the upgrade.
Did the upgrade this weekend, and I still can't get things happy, the boxes don't see one-another:
Here's a show failover on the primary:
Failover OnFailover unit PrimaryFailover LAN Interface: failover GigabitEthernet0/3 (up)Unit Poll frequency 1 seconds, holdtime 15 seconds Interface Poll frequency 5 seconds, holdtime 25 seconds Interface Policy 1Monitored Interfaces 6 of 160
[Code].....
Just upped our external ASA-5540 pair to 8.4(1), and now one of our nat's is busted.
Here's the lowdown:
Our public IP for our IronPorts ends in .167. That IP is natted to a VIP on our ACE, which load balances to the IronPorts.
The outside interface of the ASA uses .162, which has been the pat for all outbound traffic for a few years... except for the subnet that houses the IronPorts. Due to reverse lookup, that subnet uses the .167 IP address for all outbound traffic.
After the code upgrade, the nat won't work. No email sent or received. Nothing but Deny's on the ASA with flags reading either "SYN" or "RST". IE: Apr 27 12:56:11 10.22.151.41 local5.crit %ASA-2-106001: Inbound TCP connection denied from 69.25.174.17/36917 to 207.236.211.167/25 flags SYN on interface outside
If I return the subnet pat back to the outside interface, then inbound traffic works fine, though reverse lookup fails and anyone running a reasonable spam filter won't send to us.
after an upgrade of NCS 1.1.1.24 to CPI 1.2 on green field, it was not possible to reuse the GUI. During the upgrade, I''ve shortly seen an oracle DB error, but the upgrade was going through, without problems.At the end, it was not possible to use the GUI, and every trial to start the services was stopped with errors.I've found the following severe Bug ID's in the support forum: Bug CSCuc29378 Prime Infrastructure 1.2 won't start after a db restore/Upgrade from NCS1.1.1.24 Oracle DB bug as well: CSCtw59460.I see only a new installation from scratch (1.2) as solution, but the bug is not resolved in V1.2, as seen in the bug tool.
- As the customer has an v.1.0 license who worked with NCS 1.1.1, do I need an upgrade order to be able to activate an installation from the v 1.2 ova (new PAK)??
- I'm searching for a one year CPI partner license, because I heard about in some Cisco Live sessions, but I did not find a way to acces´s to it.
I have an ASA5510 which was running version 8.31. SSH was working fine on version 8.31 but since i upgraded it to version 8.41 the SSH stopped working.
View 7 Replies View RelatedAn ASA5510 (with 1 webserver behind it, just starting to build the cluster) was functioning OK with version 8.2: I was able to log in using RDP to the server bhind it from some trusted IP's.
I updated ASDM to the latest version 6.4.7, and then the ASA-software to 8.3.2. After reloading, I could not access the server anymore. I saw that changes were made to the config. Then I updated to version 8.4.3, same results of course, and this is the config. [code]
we recently upgraded our ASA 5510 active/standby cluster from ASA Version 8.3.2 to 8.4.1(11). Unfortunately the standby ASA is now crashing a few seconds after the configuration was synchronized from the active ASA.
Also completely disabling HA, bringing the default config to standby ASA again and activating HA afterwards did not work. Also tried through the Wizard provided by ASDM to be sure to have no errors with requirements.
How to solve this without doing a downgrade back to 8.3.2. ?
I am trying to upgrade CP Express to 2.5 and after the upgrade I bring up the webpage to login and I am prompted for my credentials, I enter them and I am authenticated. However the CP Express home page never loads. I have tried to reload 2.0 but it does the same thing.
View 3 Replies View RelatedWe have a 5510 ASA that was running 8.0 and were using it for clientless VPN access. Through this, we published bookmarks that linked to an internal Microsoft 2008R2 RemoteApps server, which users logged on to and then launched RemoteApps (basically being RDP sessions to apps on the server).All worked fine until we upgraded to 8.4 over the weekend and we now can't launch the RemoteApps. We can still login through the ASA, still click a bookmark to take us to the RemoteApps server's webpage, still then authenticate against the domain fine and still see the published apps. The problem now is when we launch the apps we get "this computer can't connect to the remote computer" messages and the app fails to launch. Nothing has changed on the RemoteApp server side, only the upgrade to 8.4.
View 2 Replies View RelatedI get the message "unidentified network - no internet access" on my computer since my upgrade to Windows 8. I'm using an Actiontec GT704-WG DSL modem/router connected to an ASUS M4A79XTD-EVO motherboard. I can get wireless access to my computer - a desktop - from the modem but not from the cabled DSL. Wireless is slower and less reliable it seems
View 2 Replies View RelatedRegion : India
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL EVDO
I have one BSNL EVDO data card which was working fine before firmware upgrade to latest 3.14.2 Build 120822 Rel.57775n. Now it is keep on saying device unplugged after identifying the device. The device is working fine while connected on my laptop.
Yes I had just upgraded my BEFW11S4 and now I can't log back on using 192.168.1.1, I went to the version 1.0 firmware but now I'm thinking that's not what I should've done.
View 5 Replies View RelatedI upgraded my 6509-Es (sup720s) to 122-33.SXJ3 and now the banner command can not end when I include the ^ at the end. It seems to be stuck in text edit mode IE and usually hitting enter following that brings me back to command but it doesn't do anything but bring me to the next line.
View 4 Replies View RelatedAfter I have upgraded our ASA 5510 to 8.4.2 I have problem with the management interface.Our former firmware 8.2.3 had no problem using the management interface as a DMZ zone, but after we upgraded to 8.4.2 we can't make it work.The interface and the protocol is up, when I type: show interface.But when I ping the interface from a computer connectet to the interface, nothing happens.
Even the logging shows nothing.
I have a scenario with 2 7609s connected through a MPLS service with 10 GE. In each7609 we have a 24 port channelized T1 Circuit Emulation Over Card.
The requirement is in 2 parts. First, we need to provide a T1 emulation service between the 2 7609s T1 cards.
The second requirement is that in one end there is an OC3 port, so the customer wants to send the traffic from this emulated T1 onto the OC3.
I am currently setting up a new VRF on a Cisco 7609 which is advertising (as a RR-Client) an iBGP route to a Juniper MX960. This route is then getting sent back to the default route table on the 7609 but rejected due to the cluster-id loop prevention. Although not ideal I need this route to be visible in both tables.Is there a way of changing the bgp cluster-id per VRF rather than just globally?
View 2 Replies View RelatedWhat are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies View RelatedWe have a router 7609 with Supervisor Engine 720 (WS-SUP720-3B) (Policy Feature Card 3 and MSFC3 Daughterboard) and We have to configure QoS over a FastEthernet interface on a WS-X6148-RJ-45. When I try to apply the policy command I get the next log:
#service-policy output TEST_QOSbandwidth percent command is not supported in output direction for this interfaceConfiguration failed on: FastEthernet1/2 What kind of hardware and software requirements I need on my router to perfom QoS over ethernet interfaces?
Configuring MPLS over GRE tunnels. I did not find any proper configuration example. I need to do this for encrypt the traffic between two PE routers. I have 7609 routers.
View 20 Replies View RelatedI have a hight CPU utilisation problem in my CISCO7609-S routers. the cpu utilisation can rise 99% et this is usually. In the moment of hight CPU the the process CPU give the following:
the show processe cpu history give: show version
i have a problem of high cpu on my CISCO 7609 cased by LMS 3.2. I have captured the trafic flowing between LMS and the router,
View 2 Replies View RelatedFirst and foremost, what I have are 2 x 7204VXR (Gateways), 1 x 4507R-E (Coreswitch), and our ISP have 7609.Got some issues with redundancy with our ISP.
7609
I I
I I
7204-A 7204-B
| |
| vrrp |
| |
-4507R-E-
|
|
internal network
Both outside interfaces of 7204 gateways are connecting to 7609 with different public ip block. I used VRRP for my internal nework and failover have been tested working.
Even tried to remove link of 7204-A and 7609, the failover works perfect. If I shutdown/ remove the link between my 4507R-E and 7204-A (primary gw_higher vrrp priority), vrrp redundancy/failover still works, but pings from internal network to internet is only 50% success....alternate 4 ping reply and 4 time out.
I have to do a migration of sup32 to RSP720 for which I need to know if you can operate the equipment connected with the 2 supervisors at the same time??? and it still working ?
View 1 Replies View RelatedIn my existing production router 7609 of my company, sup-engine already fixed in slot 5 with SRC2 12.2(33) IOS and I need to insert another sup engine in slot 6 with SRE7 IOS code image and after this, again sup engine in slot 5 must be with SRE7 IOS image...(also I have extra sup engines with SRE 7 code image ready with me) Query:i am going to offload router before proceed for this activity?i will insert new sup engine in slot 6 with SRE 7 ios image and now i need to re-install spare sup engine with SRE 7 code readily available with me by removing existing sup engine from slot 5 (Active) so what will be the proceedure to insert new sup engine with SRE 7 code in slot 5 and slot 6 with minimum downtime of router?
existing setup sup engine in slot 5 with SRC2 12.3 (old hardware) slot 6 is EMPTY
final result should be like this: sup engine in slot 6 with SRE 7 (new hardware)
sup engine in slot 5 with SRE 7 (new hardware)
Yesterday, myself and local support team has been engaged to perform troubleshooting the issue of some web site accessing .Mos of this case is cased by MTU issue, So, I've tried to configure the following configuration on interface tunnel 0.Device: Cisco 7609 with IOS s72033-adventerprisek9_wan-mz.122-18.SXF8.bin
I've tried to figure out what the supporting command after 'ip tcp' in tunnel 0 and following likes..ip tcp ?compression-connections Maximum number of compressed connectionsheader-compression Enable TCP header compression.there is no such command about 'ip tcp adjust-mss.So, my questions is that what is the replace command for 'ip tcp adjust-mss' ? Is this only support on Router? such as Cisco 7200. or not, to take effect same functional on C7609, what is the command for that?
I have a cisco 7609 running IOS version c7600rsp72043-advipservicesk9-mz.122-33.SRE0a.bin with the following modules..
sh mod
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
3 20 7600 ES+ 7600-ES+20G3CXL
[Code]....
The circuit has been tested as clean , so for the moment we have to assume that it is not a circuit issue We also have another idential 7600 in another POP with similar config that does not display the same problem
I have a 7609 with a Flexwan module with a PA-POS-1OC3. Is there a command to determine they type of SFP in the module ? sho controllers POS didn't provide the SFP type.
View 2 Replies View Related