Info Of a EEM configuration that would reset an interface on the router and force a re-dhcp when connectivity is lost to an upstream router? I would like the applet to run every 15 minutes. I am thinking of an event that is triggered to do a shut/no shut on the interface when 5 pings are lost.
View 5 RepliesWe have a Cisco 886G router connected to the internet. The router receives an ip address. We experience however a problem when the lease time expires. The router does not send a DHCP request to renew it's ip address in time. This causes an interface reset, and connectivity loss, after the lease time of 8 hours.
We are running IOS 880data-universalk9-mz.151-3.T.bin. Config on DHCP receiving interface is:
interface VlanX description To Internet MODEM ip address dhcp ip access-group TEST in!
We have two autonomous access point 1142 series running 12.4(21a)JA1 and randomly the Dot11Radio0 interface goes into reset/down state. At first I thought it was something related to power consumption issue on the switch, but looking at the remaining (w) I have plenty.
View 8 Replies View RelatedI am facing a problem with my access point AIR-LAP1141N-E-K9, which was converted from LWAPP to autonomous, radio Interface Dot11Radio0 is going to reset down state very frequently.AP is connected to WS-C3560G-24PS (POE) switch. [code]
View 4 Replies View RelatedWe have 4x AP1142 standalone APs in WDS mode with roaming and RADIUS from Windows AD for auth.Everything works as expected apart from two APs that frequently reset Dot11Radio0 interface. The other two are fine.
The config on all APs is identical, version of IOS is the same accross all APs (12.4(23c)JA3). The only way to get reset inteface back up is to "reload". [code]
I would like to know if I can reset the TTL value for all IP packets to 64 as they exit my network through an ASA5505 to the outside network. Can this be done on a 5505?
View 1 Replies View RelatedI started having connectivity issues between my core 4506E (Sup7E) and Cisco 2960S. There were input and CRC errors on Te int (SFP 10Gb - LRM) on 2960S, which cause the interface to reset and drop connections. While troubleshooting this issue, I have replaced patch cords and also had the tech checking the fiber. He said that there was some residue on one of the connectors, so the light levels fluctuated in 1300nm, but worked fine in 850. Well LRMs are using 1300, so he re-polished the tips, which worked to stabilize the light levels. After all that, I was still receiving the input/CRC errors, but the connection was NOT dropping. As my last resort I swapped the SFPs between the core and 2960, thinking I should start having issues on the core end. Well, here's what happened: I stopped receiving input/CRC errors on 2960 (also no errors on the core), but 2960s started generating Rx power high alarms: [code]
View 1 Replies View RelatedThis is regarding an issue with one of my access point. The access point 1252 is autonomous one running the IOS version C1250 Software (C1250-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
The status of the dot11Radio 0 interface is showing as RESET. I have pasted the interface brief details below.
ap03#
ap03#
ap03#sh ip int brief
[Code].....
I have an issue with input errors, overruns, and input reset drops on the inside interface of an 5580-40 (v8.2.5: Transparent mode) The box is not stressed at all according to the 'show' commands in the Cisco troubleshooting performance document for PIX/ASA v8.2.5. Nothing stands out because is pretty much normal, nothing (processes, RAM, blocks, IO...) really being highly utilized. I have replaced the 10Gig card and that seemed to work because the rate of errors has gone down tremedously. The next step is to RMA the whole box.My question is what would be the cause of the inside interface to stop processing traffic (I say that because the syslog server stops receiving messages) for some periods of 30 seconds periodically throughout the day and clients lose their connections (ie Outlook, IBM Sametime, Oracle, MSSQL..etc). Can the issue be somewhere related to the overruns and input errors?
View 2 Replies View RelatedDoes any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?
View 3 Replies View Relatedi have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies View RelatedIs it possible to set up a WAN interface on a FastEthernet interface of a Cisco 877 Adsl Router ?Due to my ISP, i've to use an external VDSL modem and must connect it to my cisco 877 router (and leave it's adsl interface unused).But i don't know how to set up a wan port, other than the adsl interface itself (dialer0), on my cisco.
View 7 Replies View RelatedI have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?
View 3 Replies View RelatedI was messing around with IP address settings in the router firmware, screwed up, lost internet connection via my router, thing is i couldnt get my connection back even if i put all the settings back to where they were, Resetting the router and doing initial configuration didnt work either.
View 3 Replies View RelatedSB5100 leased modem from Comcast. Have been thinking about purchasing a 5101 to avoid the $7/mo lease fee, but am not sure if I will just have more issues like this if I do. This thing will drop to .5mbps (sometimes .4, sometimes .7, etc.) when this issue is occurring. Just for contrast, after resetting it, it jumps to 22mbps (we pay for 20). So, what's the deal? I have it tucked under our desk so that we don't have to see it all the time. In order to reset it, I have get under the desk on my back like it's a vehicle and I'm changing the oil.
View 9 Replies View RelatedOk, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router.
View 2 Replies View RelatedMy EA6500 has been working fine for the last few months but a few days ago i upgraded to the latest firmware 1.1.28.147876 - this was done by an ethernet cable, not by wifi. However i've noticed the router reverts back to the previous fw 1.1.28.146856 when the router is rebooted or factory reset. I've repeated the fw upgrade process and also done a hard reset before upgrading the firmware but no avail. Normally after firmware is 'upgraded' the router reboots and i get the message "firmware successfully installed" but then on subsequent reboots the firmware reverts back. I'm using local router access but even using smartwifi gives the same issue. When upgrading fw, i've tried both options online & manual but again makes no difference.
Don't really fancy calling Linksys support and going through 4 hrs of basic trouble shooting. Or perhaps Cisco have introduced a new automatic firmware downgrade option in their routers?
how do I change my router password?
View 1 Replies View Relatedi have verizon fios and a MI424WR-GEN2 REV E and the past 2 months i woke up to find all of my devices, 2 win7 laptops and a droid through wireless and an ubuntu desktop through ethernet, wouldn't connect to the internet (through the fios router). i did a firmware update, but it's still breaking every week or so.
View 2 Replies View RelatedFor reasons that are slowly pushing me over the edge of insanity, I have to reset this dumb router!!
I press the stupid little button on the back of it, the lights go out, one amber one comes on etc. etc. but when I go to 192.168.0.1, everything is still the same!!
Like the passwords are still there and nothing has changed! I thought resetting it was supposed to wipe all that stuff out so you could start from scratch? Also pulled the power cord in and out a zillion times but no way it will reset!
As an aside, I am having no end of problems getting my iPads (2) and iPhones (2) to connect to the wireless network! The "Network Discovery" button will not stay checked and though I have done all the Googling and been into Services to start things running, no way it is going to work!
But I digress, how do I get this fool of a router to reset properly?
My router has been having major problems lately [Well, for a while now]. Before, it would make all my machines [1 PC, 2 Laptops] disconnect from the internet briefly and reconnect. This doesn't impact browsing, video watching, etc. It wouldn't even say I was disconnected. However, I know it was disconnecting because programs like AIM, MSN, and multiple video games would say I lost connection. For example, MSN would disconnect and take me out of any conversations and reconnect a second later. Friends tell me that I keep going offline and then online.
I read somewhere I should change my channel, so I did and still got the same problem. Furthermore, my router/pc are literally right next to each other. Then I read elsewhere I should do a factory reset on my router by holding the reset button for a while. So I did and it reset. It started broadcasting as an unsecured network, so I was going to secure it.
1. Log in via http://192.168.0.1 (default "username: Admin and no pass")
2. Go to setup tab ----> internet ----> internet connection wizard2.1 CHANGE PASSWORD ! click next 2.2 chose time zone (you know where you are) 2.3 Configure your Internet Connection DHCP Connection (Dynamic IP Address)Choose this if your Internet connection automatically provides you with an IP Address. Most Cable Modems use this type of connection. 2.4. press "clone your computer's MAC address" ; hostname: 'your computer name in ubuntu' ( mine is "grobar" yours is ..... )
3. Go to setup tab ----> wireless settings ----> Wireless Network Setup Wizard (after this we're gonna do manual settings)
3.1 give your network a name= SSID (e.g. 'grobar')
3.2.Automatically assign a network key (Recommended) and chose WAP or WAP2
3.3 Write down the network key!!! Or do printscr and save this page.
4. Go to setup tab ----> wireless settings ---->Manual Wireless Network Setup 4.1 Wireless Network SettingsEnable Wireless : ALWAYS Wireless Network Name : (Also called the SSID) the name you gave in 3.1 802.11 Mode : chose "mixed 802.11n,g and b" Enable Auto Channel Scan : YES Wireless Channel : AUTO Transmission Rate : BEST (Mbit/s) Channel Width : AUTO 20/40 MHz Visibility Status : !!!Invisible!!! (so that no outsiders know your SSID except you) So after I finish the Internet Connection Wizard [Setting up Password etc], the http://192.168.0.1/ page asks me to click "Connect" so it can reboot the router with the settings. When I do so, the router turns off with the power icon being orange. After about 15 seconds or so, the broadcasting icon, power icon, and PC1 icon all turn green. However, there is a globe icon on it as well and that is ORANGE.
Regardless of power cycling, redoing the process, etc. it stays orange. None of my machines can connect to it. The only way I can connect again to the router is if I do a reset again (By holding the reset button). But then, I am unsecured and live in an apartment. I would like to add that the above process is the one I did previously and it worked fine. But then I had to reset the router and a similar problem occurred but I managed to fix it somehow and the first problem I talked about started happening (Reconnecting and disconnecting). Furthermore, when I go to "Connect to a Network" one of the old SSIDs I created for the router is still there regardless of the router status (Offline, Not connected, etc). I am typing this by connecting my PC directly to my modem. Router Information: D-Link DIR-615 300N
I reset the router and now it doesn't have a default gateway address. It stops on the check for network status when trying the install wizard and says it can't install it.
View 2 Replies View Relatedmy cable company tells me my router is not refreshing ?? even after i disconnect - reconnect ..the power is the button on top with the circling arrows for refreshing it .. i do have a static IP if that makes a difference .
View 8 Replies View RelatedWe've recently changed data line providers and now have some Cisco 877 routers we'd like to reconfigure and use at other sites. Although we own these, they were configured by our old data line providers, I'm having a hard time of resetting them to factory defaults. The simple, hold down the reset button until it restarts does not work.If I press the reset button within 5 seconds of power up to load the default rom image, I get the below:
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: [URL]
Copyright (c) 2006 by cisco Systems, Inc.
C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
Booting flash:c870-advipservicesk9-mz.124-24.T.bin
Error opening: flash:c870-advipservicesk9-mz.124-24.T.bin
[code]....
I assume from this the required bin has either been removed, renamed or overwritten.As soon as the router boots it requires a password and I dont have the password to be able ftp files in and out of it.
If my computer has been sitting for a while without using the internet and i open my browser the dsl and internet lights on my router shut off for about 15 seconds and no one in my house has internet and then it turns back on. this ONLY happens when it has been sitting for a while with the browser closed and my computer is the only one that makes it do it. also i don't have my computer set to sleep after a certain time, my monitor turns off after 5 minutes and that's it. i have a siemens gigaset se567 and my isp is telus.
View 1 Replies View Relatedi cant use a new tablet i bought due to i can't remeber pas word for router it was such a long time ago it was installed
View 2 Replies View RelatedMy linksys router reset itself. Yes it reset itself. It resets to default paramaters. I had to change the router parameters in the webpage with the wired connection to the router. That works fine, but after a day or say it comes back to default again. I am going crazy, I am sure nobody is pressing the little button on the router. Do I have virus or something or maybe the router is going bad. It's a WRT54G.
View 2 Replies View RelatedRecently reset a Linksys Router. The only settings I changed were the name of the Router, the password, and the security settings to WPA2. My computer is able to connect to the router and has internet access. However, my cell phone is able to connect to the router/wireless network successfully but the internet is not workingIs their a setting on the router that I need to change to ensure that my cell phone can access the internet
View 1 Replies View RelatedI'm trying to setup my linksys e1000 router as an access point and I cant figure out how to log in to it to change its settings. I've done every reset procedure I can think of but when I power it up it still shows up as a "security enables network".
View 5 Replies View RelatedAt times when my laptop is running a dianostic it says maybe your DNS is haveing a problem. I don't know what a is DNS
View 2 Replies View RelatedI forgot my user name and password to lock my router. How can I reset it.
View 2 Replies View RelatedI want my wireless to be secure.
View 1 Replies View RelatedI need to reset my login password
View 3 Replies View Related