Cisco WAN :: C880 Pppoe On IOS (15 Version) Does Not Work
Dec 5, 2010
The pppoe on IOS (15 version) does not work (when using 12.4 version- everything is OK)I have tried it with c880data-universalk9-mz.151-1.T.bin, c880 data-universalk9-mz.150-1.M3.bin, c880data-universalk9-mz.150-1.M2.bin - DOES NOT WORK.But it DOES WORK with c880data-universalk9-mz.124-24.T4.bin.The configuration interface FastEthernet4 no ip address duplex auto speed auto pppoe enable pppoe-client dial-pool-number 1 service-name "xxx" interface Dialer0 ip address negotiated ip mtu 1452 encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname xxx ppp chap password 7 xxx.
View 10 Replies
ADVERTISEMENT
Jan 17, 2013
Used an E4200 version 1 to terminate PPPoE on a really high speed connection? By that I'm talking say 400Mb or higher.
View 9 Replies
View Related
Feb 19, 2011
is it possible to configure a Cisco 878 Router to act as a device(router) between a DSL Modem and the LAN ?
There is the following scenarium: "Deutsche Telekom DSL Modem -> Cisco Router 878 -> LAN"
DSL is an SDSL Connection with a static IP address.
View 1 Replies
View Related
May 4, 2011
There is a strange problem with :c880data-universalk9-mz.150-1.M4.bin IOS. I can't ping gateway IP address and "sh ip route" does not show any routes.
interface FastEthernet4
ip address a.b.82.66 255.255.255.0
duplex auto
speed auto
View 7 Replies
View Related
Sep 26, 2011
I got a Cisco C880 router( IOS version: 15.1(2)T1 ) with PCEX-3G-HSPA-G card installed When I insert my 3G card and issue show cellular 0 network, I found that the network is not my 3G card ISP, may i ask how can I manual select the ISP?
View 1 Replies
View Related
Jan 8, 2013
I have installed WiSM2 with ver 7.4 and Bonjour works great with instruction provided, But…… 2 problems. I cant get it to work on the same subnet. (odd since the whole problem was not able to work across subnets), More important the new Code function / password function on the airplay wont work. I get the code on the projector, but the ipad never pop up the login box it just errors out.
View 2 Replies
View Related
Mar 7, 2012
Does the ASA5520 work with the newest version of h.323?
View 1 Replies
View Related
Sep 29, 2011
problem with a Belkin Wifi Router: it's a G+ wireless router
Model:F5d9231-4 Version 2
OS- XP Service pack 2
i've tried resetting to factory settings and power cycling my modem and router but nothing.. the issue is that my Wifi icon on the router does NOT show and i went in to the setttings for it and tried resetting everything and nothing works. it works fine hardwired but my Wireless does NOT work..
View 1 Replies
View Related
Dec 10, 2011
I am trying to remove a line in a particular access-list configured in a FWSM module using this command "no access-list <acl> line 19 x x x x" but it doesn't work. See below:
FWSM/xxx03(config)# no access-list ?
configure mode commands/options:
alert-interval Specify the alert interval for generating syslog message
106001 which alerts that the system has reached a deny
[code]...
How can I remove a line from the access-list without clearing the entire access-list?
View 3 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
Mar 11, 2013
which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies
View Related
Apr 3, 2012
provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies
View Related
May 10, 2011
i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies
View Related
Mar 13, 2012
We are looking to upgrade our WiSMs to version 7.0.230.0, but the Cisco compatibility matrix suggests we need to upgrade WCS to the same version (it is currently on 7.0.172.0). My question is can we upgrade the WiSMs and do the WCS at a later date with no issues or do we need to do them at the same time to keep visibility of everything?
The reason I ask is that some of my clients use lobby ambassador for some of their users and they will need wireless access on the day we are due to upgrade WCS (the WiSMs are due to be upgraded and rebooted earlier that morning.
View 1 Replies
View Related
Oct 3, 2011
I have a Cisco 877 doing PPPoE through a ISP supplied modem that is in bridge mode (long story). When the DSL drops on the modem it takes around 5 to 10 mins for the 877 to redial the connection.
Here is the config I'm running:
interface Vlan1
description PPPoE-Interface(WAN)
ip address dhcp
load-interval 30
pppoe enable group global
pppoe-client dial-pool-number 1
[code]....
Its possible some of that config is redundant but I've tried as much as I can see online.
View 6 Replies
View Related
Sep 6, 2011
Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies
View Related
Dec 16, 2011
Cisco 877W. I configured it for PPPoE. But once I plug in the ADSL line, the dialer interface will get IP Address. But after like 2 minutes the PPP link will go off and I will get this log message: "Interface Vi1 unbound from profile Di1".
View 2 Replies
View Related
Mar 2, 2011
Is it possible to set up a pppoe client on a VLAN interface, or a switch interface associated to an VLAN?. For example, in a 881 ethernet router, could I configure a pppoe client on any of the lan interfaces in addition to the pppoe client configured on the WAN interface?.
View 4 Replies
View Related
Aug 29, 2011
Trying to find a way to configure my 851 for home use. My internet provider use PPPoE with PAP and althrough I found many configuration options they all are incomplete...or i cant find the logic behind those commands. First of all I need to say what I need:
1. Configurate my int Fa4 (WAN) with pppoe so when i insert my ISP cable in it it will negotiate and take IP.
2. Configurate DHCP on LAN (Fa0-3) so that when I insert my PC it will take a fake IP.
Here is the place where i found some conf examples: [URL] and I have some questions:
1. MTU - Should I use the 1492 value or the "pppoe-client ppp-max-payload 1500"?
2. ip route 10.10.25.2 255.255.255.255 dialer 0 - How can i set an IP route when my connexion informations only come after i connect? (Because is PPPoE)?
3. I cant configurate the DHCP because I dont know the default route, I dont know the DNS, and i dont know the default gateway because I dont know them due to PPPoE !
View 20 Replies
View Related
Apr 27, 2011
I am using ASA 5505 with firmware 8.2(2). My ISP uses PPPoE as a WAN connection protocol. There is a problem with getting PPPoE session started on my ASA 5505. The debug output says that after negotiation of PPP-authentication protocol ASA receives a PADT packet from ISP’s concentrator. To get more information I captured all packets on outside interface with WireShark. Packet-dumps (in .pcap format) are attached in this post. I have tried all possible combinations of PAP/CHAP/MSCHAP values in “vpdn group MYGROUP ppp authentication” command. If you take a look at the packet-dumps you can see, that in case of “PAP” – ISP’s concentrator rejects negotiation (PAP is not supported by my ISP). In case of CHAP/MSCHAP (that ARE supported by my ISP) – ASA acknowledges the using of MSCHAP v.2 PPP-auth protocol, which is actually not supported by it…
Judging by MAC-addresses of ISP’s concentrators it is visible that Cisco’s equipment also is used.
The questions is: Why ASA acknowledges using of unsupported ppp-auth protocol during negotiation and what I need to do to resolve this issue? (ISP’s support says, that they cannot change PPP-auth protocol negotiation order. Also they says that I need to contact with manufacturer of my equipment).
View 3 Replies
View Related
Apr 18, 2012
I have cisco router model 1921 , how can i terminate my existing pppoe connection to 1921, so that my other LAN users can use internet.
1- One cable (RJ45) which is comming from ONT has connected with Integrated WAN Port on router.
2- One cable (RJ45) which going to my LAN switch has connected with Integrated LAN Port on router.
Now i need to configure my router, so that i can give internet access to my LAN users. I red cisco's guides but not clear regarding configurations, because in guides they use modules to configure pppoe. But i am not using any module, i am simply connecting one cable for WAN and one for LAN.
View 1 Replies
View Related
Jun 19, 2012
PPPoE is established and I can access router from outside. But router can't ping itself and ouside and NAT isn't working as well. Main goal is to make Internet work from router.
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)
version 15.0
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
[Code].....
View 2 Replies
View Related
Mar 19, 2012
I have recently gotten a cisco 1941 router running version 15.1(3)T, and am trying to configure the router as a PPPoE server for access via a vlan on one of the gigabit ethernet ports.I currently have a cisco 2620 router (version 11.3(2)XA4) with the following relevant configurations:
vpdn enable
vpdn multihop
vpdn domain-delimiter @ suffix
!
vpdn-group pppoe
[code]....
I am trying to duplicate this (all but IP addresses) on the new router, but there are some options that do not seem to exist in this particular software/hardware combination. Specifically,
vpdn-group pppoe
accept-dialin
protocol pppoe
does not accept "pppoe" as a protocol, only allowing l2tp. What has changed, and what the proper configuration is.
View 1 Replies
View Related
Jun 20, 2012
I'm trying to get a PPPoE config working on an 1841. Running c1841-advsecurityk9-mz.124-3i.bin . I tried c1841-advsecurityk9-mz.151-4.M4.bin but it has even less protocol options.
I used a walkthrough but it suggests the following fragment which doesn't work because there is no "protocol ppoe" command available on my system. Perhaps there is a simpler way to do this? I tried c1841-broadband-mz.151-4.M4.bin but it doesn't seem to have ssh available.
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
exit
[Code]...
View 3 Replies
View Related
Sep 25, 2011
I have a ZyXel P-660R-D1 DSL modem, and lately I've been experiencing random outages. I'm not super knowledgeable when it comes to the technical side of networking, but I know enough to look around the modems GUI and recognize when something isn't right. I'm pretty sure this is not a problem on my end, but I'd like to hear a few other peoples opinions. Basically I have four lights on the modem: Power, Ethernet, DSL, and Internet. DSL is the light that indicates connection to the PPPoE server, and lately it will just randomly drop. I've never experienced problems connecting with the PPPoE server until just recently. Every once in a while my Internet light will drop, and a simple reset will take care of it, but rarely am I ever not connected to the PPPoE server. One day it was down for three or so hours, one day for nine, another day it cut in and out for about four hours, and today was another nine hour day. how it works is that my username and password are verified through the ISPs PPPoE server, and then I am granted access to the web. I'm lead to believe that it's nothing on my end because all troubleshooting methods fail, it just randomly fixes itself several hours later. The first nine hour stretch I experienced I thought may have been because of maintenance or some other unforeseen circumstance, but it has happened a few times now so I'm not too sure. My provider, Earthlink, hasn't listed any 'Known Outages' on their site, but then again they never do.
View 1 Replies
View Related
Nov 27, 2011
Two days ago our desktop computer stop having internet access. I called my ISP about this problem and they said that everything was fine with my router and that it might be a bad cable. I bought a new cable and it wasn't the cable. I called my dad's friend who works with computers and he said that he thought the NIC was bad. So we went to Staples and bought a Gigabit Ethernet PCI Adaptor, because that would fix the problem, well i installed all of the software and it didn't and we're stumped on what to do.
Our laptop still gets wifi however when I try to connect on my desktop it says that it can't connect through the WAN miniport PPPOE. It gives me error 815
View 4 Replies
View Related
Jan 2, 2013
I just switched to DSL from cable internet and am having some trouble setting up my router with the new internet service. DSL modem-->Router-->Network with PC and PS3
ISP is ATT
DSL modem is a TP-Link 8616
Router is a D-Link DIR-628
I put my ATT username and password into the router but it never completes a connection to the internet. I was able to create a soft PPPoE gateway connection through my computer using my username and password, but I want my router to do this, not my PC. How do I get my router to connect directly to the Internet connection rather than having my PC connect? My setup would be fine as-is if I just had 1 computer but I also want to go online with my PS3, and it won't connect like my PC will, even after putting the username/password in.
View 11 Replies
View Related
Jan 7, 2011
A PC connected to a Cisco 877 router and 877 router is connected to another router (7301) via GRE tunnel,Cisco 7301 router is a NAS server and is being used as a PPPOE server.If user create a PPPOE connection on his computer and dial with a username/pass we want to send the PPPOE traffic to 7301 router, so 877 router should pass the PPPOE traffic to 7301 and user will be able to connect,User -> 877 -> 7301(PPPOE server).
View 4 Replies
View Related
May 13, 2013
I get stuck in one case. One of my customer has two FTTH lines. I have to config PPPoE in routers. In one line I config succesfully, but one line never up. I call to ISP they ask me to config extactly VLAN id 10 in the physical subinterface. But in subinterface there is no command "pppoe-client dial-pool-number". I check the old modem FTTH, they also config VLAN 10 in Wan interface. I tell ISP why we have the same two FTTHs, but two differrent config ways. ISP says because the two line run in two different infrastructure, two different devices. I don't know how to do now? stay in customer side or ISP side. Here is my PPPoE config:
interface FastEthernet0/0
no ip address
duplex auto
[Code].....
View 4 Replies
View Related
Jan 1, 2013
I'm trying to configure an Cisco 1841 with IOS 12.4 to an FTTH conection.I would configure PPOE protocol in the vpdn-group 1 but I can't see this option in the command line,I have read about the command "bba-group pppoe global" but i'm not sure if it has the same result. It's valid? How can I use the bba-group pppoe global¿? I need to use it with a virtual template?
View 9 Replies
View Related
Aug 23, 2011
I am trying to get a Cisco ASA5505 to get onto the internet using PPPOE through a Netgear DG384 ADSL router. I have the Netgear in Modem only mode - if you put it in Router mode internet access works fine. When I change it to Modem mode, the error I get on the ASA is PADI timeout. Looking through the config I think I am missing a Global NAT??Also not 100% on the best way to set the IP - we have a static IP from the ISP. Do you set the interface to use DHCP and get this address or set it statically? Then do you put the setroute option or put in a static? [code]
View 5 Replies
View Related
Sep 3, 2012
What commands do I need to enter to correctly authenticate with my DSL PPPOE provider? I need to have the ID and Password entered into the router.
View 19 Replies
View Related
