I am having a hard time connecting my router into a internet modem since my modem is giving its own private ip address in short the modem is a router in itself. in addition, I cant change the modem's dchp pool its fix with 192.168.1.0 network.
View 3 Replies
Using Cisco 1811W with IOS 15.1(4)M5. FE0 and FE1 are connected to the internet via Billion ADSL2+ modems operating in bridged mode. Both lines are similar so I'll only discuss FE0 from this point on.Local subnet is 192.168.128.0/24 with router on 192.168.128.1 as default gateway. Modem on FE0 has static LAN IP of 192.168.128.2 and when plugged into the switch on the LAN side, the web interface can be accessed at that IP address. Unplug the modem from the switch and plug it into FE0 and it now works as desired providing access from the router to the internet but the web interface is no longer accessable at 192.168.128.2
I tried adding a static route "ip route 192.168.128.2 255.255.255.255 FastEthernet 0" and also "ip route 192.168.128.2 255.255.255.255 Dialer 1" Neither worked and presumably it isn't that straight forward. Possibly NAT or other routing configuration required.Although there isn't much to configure when in bridged mode, I mostly want this setup so I can look at the ADSL connection status and for the modem to write messages to syslog (works when plugged into switch on LAN side), or SNMP access.
I am setting up 1811w router for accessing internet.DHCP is configured on it but it is not providing IP to laptop connected on port fa6. [code]
View 3 Replies View RelatedI am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedI have an acer aspire 5315, windows vista,32 bit operating system.I recently got a new modem/router (it's apparently 2in1 from rogers) and I cannot connect to the internet. When I attempt to connect i can only connect to the "local" connection. Everyone else in my family can connect via wireless and I can only connect if i use an ethernet cable which is directly connected to my laptop.When i typed in ipconfig/all on the command prompt this is what pops up :
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
[code]....
I am having this same problem with the same modem. I can get everything to turn green but the internet which blinks orange
View 1 Replies View Relatedwhen i pluggled in my ethernet cable, it started to disconnect from internet after a few seconds.In a desperate attempt i pressed the small reset switch on the modem but as from then i could not connect to internet at all. Could reset have changed some settings?Do you think the problem could be just the isp blocking me for some reason?
View 4 Replies View Relatedmy problem is that my old modem is connection to the internet i got a new one few days ago DLINK 2750 u ,it wont connect the adsl light is stable every thing is ok , the password and the username are correct . it wont connect at all i rest tried again and again and again.
View 1 Replies View RelatedHow can I connect to Internet via USB modem without a ISP?
View 1 Replies View RelatedI wanted to connect to the internet so plugged the same cable into my laptop (running 7) [code]...
View 3 Replies View RelatedFor several years I was connected to the internet via a USB modem (with TalkTalk being my ISP), however, after purchasing a laptop with Wi-Fi for my partner's daughter, decided it was time to get a router so we could all use the internet.I purchased a Netgear N150 Wireless ADSL2+ Modem Router, model DGN1000, connected (via ethernet as the desktop has no wireless receiver) and installed it as per instructions supplied.However since that point I have been unable to connect to the internet on my desktop through the router. Wireless devices (several laptops, iPhones and games consoles) have no issues whatsoever in connecting and using the internet.
At first the desktop kept saying that I had "limited or no connectivity" which I eventually sorted out, there was some kind of issue with my IP address, but I can't remember what now. Now I when I try to load any website, Internet explorer tells me it couldn't load the page due to .... Google Chrome is more specific and tells me that the DNS lookup failed. I have tried updating the ethernet controller driver, using the 'flushdns' command, and after discovering many other people on TalkTalk tech forums having similar DNS issues, tried using DNS addresses that were suggested by both their support staff and members of the public (i.e. Google's DNS 8.8.8.8), and still nothing. If I reconnect my USB modem I can connect to the internet no problem, but I'd prefer to only have one modem on the go.I am running a HP Pavilion with Win XP (SP2), and all the laptops that have connected wirelessly (including the one I'm using now) are running Vista.
how to connect 5 pc with single 3g modem i have router & switch
View 2 Replies View RelatedLast night Comcast reset our modem (from afar) so we could get a free movie to work. After that, we got the movie but my wireless internet now does not work. I can connect when attached to the cable modem but when I plug into the router I don't have access to internet.The router is plugged in and all lights are working (it acts normally otherwise). Also, our landline phone (which is in the bundle of the cable connection) does not work either.Comcast is willing to look at the phone but refuses to get involved in the wireless thing.What the heck is wrong?
View 1 Replies View RelatedI can connect to the Internet when my laptop's connected directly to the modem but not through my wireless router. My laptop can connect to the router, but then I have no Internet access. (I've tried resetting my router and modem.[CODE]
View 1 Replies View Relatedhave a problem with connecting to my cable internet modem with my windows xp machine. My windows vista computer automatically connects as soon as you connect it to the modem but the windows xp machine gives the "limited or no connectivity" error when I try to connect. What could be causing it to work with vista and not xp? what can I try to make it work?
View 3 Replies View RelatedHow to connect two computers using one modem so they both use the internet
View 2 Replies View RelatedMy mother has an older Compaq laptop running XP home edition. She hasn't used this laptop for a while and it won't connect to the internet through her cable modem.I know it isn't a modem or ISP problem since my laptop will connect just fine. By the way, we are connecting to the cable modem with a cat 5.
View 5 Replies View RelatedI have a problem with a talk talk dsl 2680modem or the connection? Everything worked fine until I did a facory reset on the pc (running xp),when I tried to install the talk talk internet from the cd, everything seemed fine with the wizard but no internet? the phone also has no dial tone? I am 99.9% sure it is not a problem in the area,I think its a setting problem with the setup.
View 1 Replies View RelatedSo saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.
Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)
So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.
Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.
I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?
first off I was trying to change my ip address to dynamic from static, turns out I cant manually, anyways I was messing around with the configuration on my modem page (192.168.0.1) trying to enable dhcp because I know that if it shows that its not enabled yet I get my ip address automatically, it means my ip is static. I enabled a few things like netbios over tcpip and such and something to do with dns routing but I cant recall all I did and in what order because I can no longer get into the config. page and I cant connect to the internet and when I use command promp to renew my ip it says "an error occured while renewing interface local area connection... unable to contact your dhcp server and also an error occured while releasing interface loopback psuedo-interface1 : the system cannot find file specified.
View 2 Replies View RelatedI updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct
View 1 Replies View RelatedI've decided to set up a home network - my first attempt at setting up a network, but have run into a problem;I've bought a Linksys HRT54GL routers and connected it to a Cisco EPC2325 modem. I run the setup wizard and everything is going well until the router tries connecting to the internet when a pop-up appears telling me that it can't connect to the internet and that i should try turning my modem off and on again.
View 1 Replies View RelatedI'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 usb dongle directly into my computer it works perfectly and I got the router to work using a ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port. I get a connection at 40% and 100 bytes are sent and some are received but the connection drops. Is it a problem with the connection? I will upload a image.
View 3 Replies View RelatedCannot connect to Internet. Have a Netgear DGN2000 modem-router. Using XP Pro, AT+T ISP.Get to 'admin','password' page and sometimes get to Setup wizard but never able to finish it.AT+T checked line and said it was OK. Took all filters off phone lines and only have phone jack with router hooked up to it, so no interference is there. Just have DSL, 'dry loop'.Lights on router are (Green)Power,(Green) Port, (Green)Wireless,and (Green)blinking DSL, (RED) Internet light. When I leave router on these are the lights. Must turn router off so I can use Netgear unsecured network for internet on a wireless laptop running Vista.
View 3 Replies View RelatedI reset my Hybrid modem router's settings back to factory settings cause the disconnects were pissing me off.After a while, It disconnected. I tried reconnecting, but now it's only showing "No Internet access."
View 8 Replies View Relatedcan i connect to internet without settings in modem is dat possible?
View 3 Replies View RelatedMy issue is that when I attempt to sign on through dial-up I get a message stating my modem is blocked cannot connect to the internet. When I go into the control panel to look into Modem then properties it states the name of my modem Agere PCI-sv92ex soft modem but then under the attached to status it states "not present" its not listed under any COM port. I can't even look into the properties etc...for the modem.
View 1 Replies View RelatedIve just bought a new toshiba notebook c850 andf i want to connect to the internet using a wireless usb modem. Ive used 2 seperate modems and none of them work it keeps saying to reinstall or update the device. I dont have wifi and these modems work on all of my other computers why not this one?
View 1 Replies View RelatedSo I recently just built a new pc for gaming, I can't seem to connect to the internet through my router or directly through my modem. I have connected directly on my laptop and it works and through router and it works.
View 1 Replies View RelatedSometimes my wifi signal will randomly drop and I cannot browse the Internet. The network still appears on my computer and I can connect to it, however Internet pages will not load. This lasts for hours, sometimes days. If I unplug the modem from the router and connect directly to the modem via Ethernet, everything works fine! I have tried unplugging everything for 1 minute then plugging it back in and it does nothing.
View 2 Replies View RelatedI have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies View RelatedI am attempting to install the router but cannot connect to SKY ISP. I can connect my laptop to the router both wirelessly and by cable.
View 5 Replies View Related
