Cisco WAN :: Automatically Shutdown PoE Ports On 2960 Switch During Night
Sep 12, 2011I would like to save power by scheduling the PoE switch ports on my switches to shutdown every night and turn on at a specified time during day.
View 6 Replies
ADVERTISEMENT
Cisco WAN :: How To Shutdown 2960 Switch
May 16, 2012how to shutdown the cisco switch 2960.......
View 5 Replies View RelatedCisco Switching/Routing :: Catalyst 2960 / Configure Automatically Switch Over DHCP?
Jun 12, 2013I Have a problem I'm trying to configure automatically my switch over ther DHCP when I start the switch it request an IP from the DHCP from here everythings is fine but it does nothing more,indeed I put on my dhcp the option 66 and 67 which is an adress of my TFTP server and a file to download and the switch seems not to understand theses options , I tried my dhcp with a cisco airport and everythings works fine the File from the TFTP is automatically downloaded into the airport...There is an option to add or am I missing something in order to make it work with my switch ?
My switch : Catalyst 2960IOS VER : 12.2(55)SE5
Cisco Switching/Routing :: 2960 Switch Ports Using POE?
Feb 5, 2013I have a statck of 4 2960s switches, with POE powered access points on 2 of them. All of the access points appear to be functioning normally. For some reason, on 3 interfaces connected to access points, I get the following when issuing show interfaces status:
Gi3/0/9 connected: T 7 a-full a-1000 10/100/1000BaseTX
^
My question is regarding the "T" in the status field. I can't find any documentation on this.
Cisco Switching/Routing :: 2960 Switch Ports Flapping
Feb 4, 2013I have a 2960 switch and every then and now the ports are flapping, while i was on console i saw ports going down and coming up...when the ping to machine ip addresses timed out the port status on switch was still up...no errors collisions seen on sw port. Below is sh int when the port was flapping
[code]...
Cisco Switching/Routing :: 2960 / Make Ether Channel On Switch 1 Which Has 24 Fast Ethernet Ports
Oct 8, 2012I have 4 cisco 2960 switches to which many users are connected. No vlans are the only default vlan 1 is there. Now I want to make ether channel on switch 1 whcih has 24 fast etherenet ports. Can I make port 1- 8 as one ether channel which are connected to users or i can only make ethere channel of ports that are connectd to other switchs. If I can, how the other switchs will comnicate with the switch ports bundalled in the ether channel in switch 1.
View 6 Replies View RelatedCisco Infrastructure :: 3750 - C3KX-NM-1G - Ports 2 And 4 Not Shutdown
Oct 26, 2011I've put a C3KX-NM-1G module into a 3750x but can only get ports 1,3 to stand up, ports 2 and 4 dont operate. ports 2,4 are not shutdown and dont come up with working SFPs etc in another switch.
View 1 Replies View RelatedCisco Switching/Routing :: 6500 Shutdown Ports Not In Use For A While With EEM Scripts
Jun 14, 2012I have used the two sl and tm scripts that was on the previous discussion but with no luck. I'm currently using IOS version 15.how I can get this work on my c3750 and 6500.
View 1 Replies View RelatedCisco Switching/Routing :: 6500 - Shutdown Ports Not In Use For A While With Scripts
Jun 14, 2012I have used the two sl and tm scripts that was on the previous discussion but with no luck. I'm currently using IOS version 15. how I can get this work on my c3750 and 6500.
View 1 Replies View RelatedCisco WAN :: Sw Down Every Night / WS-C2960-24TC-L Switch
Sep 19, 2012I'm having problems with a cisco switch WS-C2960-24TC-L version 12.2 (50) SE5. every night the equipment goes down, and every morning around 8am comes up.
I know it comes up at 8am because at that time I arrive at my workplace and see the alarm that the switch did not backup the config. ip using his web page and see what's up for a few minutes.
but I never could discover what time vai below. is there any way to see?? with the command show logging don't appear the hoursthat came down...he was only following the hours that he came up ...
Cisco Switching/Routing :: 3750-X - How To Shutdown Only Switch In Stack
Aug 11, 2011I have a doubt. In my environment I have two Switch 3750-X in stack.
My question is: How to shutdown remotely only a switch in stack?
Cisco Firewall :: 6500 Can Shutdown Vlan1 On Switch And Still Communicate With FWSM
Jun 17, 2012It is my understanding that the FWSM for the 6500 series switches uses a 6 port Etherchannel on the backplane to communicate with the 6500 series switch.Can you shutdown vlan1 on the switch and still communicate with the FWSM? I was under the impression that you could not (although I am looking at a config with it shutdown)
View 1 Replies View RelatedCisco Switching/Routing :: Config Erasing Automatically On C500 And 2960 Switches?
Feb 8, 2012 I have a scenario where 15 c500 switches and 5 2960 8 port switch connected to 4507R core switch. There are 10 dhcp pools created on the 4507.
Eg: ip dhcp pool XXXX
network xxxx.xxxxxxx
default-router x.x.x.x
Now the default router is directed to vlans created on the switch i.e vlan 101, 102, 103 and so on. Now the remaining switches connected are configured to be in the same vlan. So the systems connected to the edge switches will get the DHCP ip automatically, Now my problem is after sometime (may be 2 or 3 hrs) all the edge switches are losing configuration automatically even though it's not restarted, even after saving the config on to nvram, everytime I connect the console and check all the saved config is lost?
Cisco Switching/Routing :: (no Shutdown) Command Is Not Working In 2970 Switch Port
Apr 9, 2013a switch port is shutdown, but when i use NO SHUTDOWN command it is working and shows administratively down. like this command does not affect on it. i should enable this port? what can i do btw, port is not in errdisable and portfast is enabled.
View 3 Replies View RelatedCisco Switching/Routing :: In Catalyst 3750 Ports Are Getting Shutting Down Automatically
Jun 15, 2012in my production environment two swtiches with stack and all ports are in the same Vlan 2 192.168.117.254 and the default getway is 192.168.117.1install correctely all were working fine but from yesterday onwards some of the ports are getting down automatically and coming up automatically and all devices are having static IP's no dynamic. [code]
View 6 Replies View RelatedCisco Switching/Routing :: 861 - Can't Configure FastEthernet Ports To Hand Out Address Automatically
May 27, 2012We have upgraded our gateway router from a Cisco Linksys RVL200 to a Cisco 861, this is a big jump from a GUI driven system to IOS CLi and i'm having issue finding my feet. I tried the Cisco CP system but it didn't work so I'm going to configure it with IOS commands. I wish to replicate the current configuration on the 200 with the following setup.
I have created a DHCP pool but i am unable to configure the FastEthernet ports to hand out address automatically, the pool is called USERS with range 192.168.1.30 -> 192.168.1.253.How do I work out the client-identifier for a DHCP client, I don't want to plug this into the network and manual reconnect all the PC's just to get the ID then make a static route.
Cisco WAN :: How Many Of 881 Switch Interface Ports Can Be Used As Router Ports
Aug 7, 2011How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedCisco Switching/Routing :: 2960 - Ports Going Up And Down?
Nov 7, 2012we hava a couple of 2960 switches and we are logging to a syslog server. Ports keep going up and down is it normal severity (error) ?
View 2 Replies View RelatedCisco Switching/Routing :: 3750x Switch Reload Automatically
Dec 15, 2012while i am configuring a port on switch .The switch reloads.After reload the show version says
System returned to ROM by bus error at PC 0x458F6C, address 0x0
show version from the effected switch is
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE2, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[cODE].....
Cisco Switching/Routing :: WS-C4506 Switch Reloaded Automatically
Dec 13, 2011We have cisco 4506 and this got reloaded automatically and showing reload in show version output but no one made switch reload.
CORE-SW-2 uptime is 8 minutes
System returned to ROM by reload
System restarted at 12:37:58 IST Wed Dec 14 2011
Cisco Switching/Routing :: 4507 Switch Reboots Automatically?
Mar 19, 2012working first time on switch 4507 , this is my 2nd week and i plug the console on this 4507 switch , the switch reboots automatically it comes to stage mention below and reboots. My question is i have not seen any error message on this switch and it reboots automatically so what is the problem.
* *
* Welcome to Rom Monitor for WS-X4013+ System. *
* Copyright (c) 1999-2003 by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************
Rom Monitor Program Version 12.1(20r)EW1
Supervisor: WS-X4013+ Chassis: WS-C4507
[code]...
Cisco Switching/Routing :: 2960 And VLan Ports
Feb 25, 2013New to Cisco and want to know if I can segment a port. I have two v lans. I have one internet connection at the opposite end of the building. Can the port the internet is connected to serve both V lans?
View 6 Replies View RelatedCisco WAN :: 2960 / 2811 - Connecting 2 Ports With Two Switches
May 18, 2012I have a 2960 and a 2811 with a hwic card I have one port set as 100 meg and another port set at 10 meg. Both are set to access mode. i need one port for failover (10 meg) . I can't do ether channel on the hwic. How do I prevent a loop when I connect my second connection. While having both connections up. Should I use bpdu guard? the goal is to have one port fail over if the 100 meg goes down. And I'm currently running ospf so it should take the faster connection.
View 1 Replies View RelatedCisco Switching/Routing :: WS-C4506-E / Switch Automatically Restarts For No Reason?
May 25, 2013Switch automatically restarts for no reason , I have upgraded the software.can not find fault. more crashinfo, see the following output:
HKZ-SSL-4-NAN-4506#more crashinfo:data
Current Time: 5/27/2013 10:28:10
Last Power Failure: 05/08/2013 16:55:28
Last Reload Status: 00000000
Last Software Reset State: 00000301
[code]...
Cisco Switching/Routing :: 4506 - Switch Automatically Restarts For No Reason
May 25, 2013A 4506 Switch reboot several times a day for no reason, I have been trying to upgrade the software . Normal operation of more than ten days , Still there reason to restart . CPU and memory usage is normal
Switch output information below:
HKZ-SSL-4-NAN-4506#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICES-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1) [ code].....
Cisco Switching/Routing :: 2960 Ports Which Only Allow Machine On Network
Feb 7, 2012it is possible to let cat3750 or 2960 ports which only allow machine on network which it use dhcp, not static ip? if so, how to configure it?
View 8 Replies View RelatedCisco Switching/Routing :: WS-2960-48PST - To Use 4 Ports At A Time
Feb 25, 2013I have an doubt about some port in 2960.He have 2 SFP and 2 Fixed Ethernet. Can I use these 4 ports in the same time? Use 2 Ethernet and the 2 SFP with Fiber?
View 2 Replies View RelatedCisco Switching/Routing :: 2960 Set Ports To Untagged VLAN XX
Aug 6, 2012I have two questions for a Cisco 2960 (WS-C2960-24TC-L)
1. I am working to setup a few Cisco 2960 switches for HP iLO access to our servers. We are going to segregate the iLO network (VLAN 40) from the data network (VLAN 10) by using a different VLAN. All of the HP servers will be configured with static addresses. My question is, how do I set all the ports to VLAN 40 so that untagged devices will automatically go onto VLAN 40? I don't want to have to configure the VLAN on each iLO port on the server. I tried to set the port to: "switchport trunk native vlan 40", but that didn't work.
2. Also, how do you access the web GUI for these switches? I get a login box, but putting in the enable password doesn't work. I have the following commands in the config: [code]
Cisco Switching/Routing :: 2960 Is Shutting 2 Ports Down On Network
Dec 27, 2011We have a 2960 switch which is connected to the core via a VLAN trunk. We have disabled broadcast port suppression but, the 2960 is shutting is shutting 2 ports down on the network and this looks like excessive braodcast. How and why would the switch start dropping traffic when the default is don't do anything? It had to be rebooted to get the port active again
View 1 Replies View RelatedCisco Switching/Routing :: 2960 - Disable Ports Looping?
May 10, 2013Disable ports looping Users connect the network cable at two points in the network generating looping. which command to disable two ports of a Cisco 2960 when they are connected at the same time with the same network cable?
View 2 Replies View RelatedCisco Switching/Routing :: 2960 - Ports To Put In Trunk Mode
May 10, 2012I've previously used trunkports and vlans between my ASA and accesspoints, connected directly. Now I want to put a 2960S-24PS-L bewteen. Where should i define the vlans (in the switch or in th ASA?) and what ports to put in trunk mode? (the ones on the switch or the one between the switch and the ASA?)
View 1 Replies View RelatedCisco :: Adding VLAN To Trunk Ether-channel Ports On 2960?
Dec 25, 2012I have trunk etherchannel ports 47,48 which both have Vlans allowed on trunk 70,71. Everything works pretty fine. Now I am trying to add a new VLAN 72 to these ports.
conf t
interface FastEthernet0/47
switchport trunk allowed vlan add 72
exit
exit
So far so good. But when making the same command for port FastEthernet0/48 my switch stuck.
Cisco Switching/Routing :: 2960 Storm Control On Trunk Ports
Feb 9, 2012We have around a dozen Catalyst 3560 and 2960 switches in a ring topology. We are considering adding storm control to our trunk ports. Up until now we have only used it on edge ports with default values and without error-disable.I am proposing that we also add storm control to trunk ports at a lower level and that we error-disable only the redundant links that make up our loops.
-storm-control broadcast level 25.00 20.00
-storm-control multicast level 2.00 1.00
-storm-control action shutdown [only on redundant links]
In a storm all links will restrict broadcast which should work accessing remote switches, but the redundant links should errdisable and block the redundant path. It is important that the action line is not applied to links that are not redundant as we could isolate parts of the network. Any reason not to use storm control on trunks?