Cisco WAN :: Sw Down Every Night / WS-C2960-24TC-L Switch
Sep 19, 2012
I'm having problems with a cisco switch WS-C2960-24TC-L version 12.2 (50) SE5. every night the equipment goes down, and every morning around 8am comes up.
I know it comes up at 8am because at that time I arrive at my workplace and see the alarm that the switch did not backup the config. ip using his web page and see what's up for a few minutes.
but I never could discover what time vai below. is there any way to see?? with the command show logging don't appear the hoursthat came down...he was only following the hours that he came up ...
View 4 Replies
ADVERTISEMENT
Feb 20, 2013
i have new project in hospital with the bellow product :
20 X WS-C2960-24TC-S
2 X WS-C3750X-48T-S
2 X WS-C2960S-24TS-S
i need to configure this switch in order to work first the 2 core switch for redundancy then each catalyst switch 2960 connected to the core with 2 uplink each uplink for each core switch that way i have rendundancy in the connection then i need one vlan ?i need to configure this switch to work perfectly with each other in best redundancy mode?
View 2 Replies
View Related
Apr 26, 2012
I have two WS-C2960-24TC-L Switch with Software Ver 12.2(25r)SEE6 with image c2960-lanbase-mz.122-35.SE5.bin and 12.2(25r)SEE1 with image c2960-lanbase-mz.122-25.SEE2.bin currently on it.
I want to enable SSH connections on the switches and believe I need to import the cryto image onto the switch. I would like to upgrade it to new version that can also support ssh connection but not sure which image to download from cisco. The switches are now live.
System image file is "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"
cisco WS-C2960-24TC-L (PowerPC405) processor (revision H0) with 61440K/4088K
[Code].....
View 5 Replies
View Related
May 19, 2013
I have an issue with one of our switches, switch model WS-C2960-24TC-L, i am not able to display switch temperature as below,
Switch#sh verCisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE2, RELEASE SOFTWARE (fc1)Technical Support: URL ) 1986-2013 by Cisco Systems, Inc.Compiled Tue 05-Feb-13 12:41 by prod_rel_team(code)
View 2 Replies
View Related
Sep 15, 2008
I'm trying to configure the GigabitEthernet interface of the WS-C2960 switch to have a full duplex. Unfortunately, there is no option to configure this neither is the speed of that interface. But these options are present in FastEthernet ports. Is there a bug in SW version 12.2(35)SE5 that explains this abnormality?
View 6 Replies
View Related
Jul 18, 2012
A quick one because I'm scratching my head trying to figure the difference between the 2960 LAN Base and LAN Lite IOS installs. I want to put a 2960 into a site which has as layer 2 link on dark fiber taking it elsewhere. This part I'm not concerned about - the WS-C2960--24TC will do what I need without issue - but I don't know if I can get away with LAN Lite, or if I need LAN Base.
I basically need V LAN's with associated SVI's, and a routed link on the up link port (I don't care if it's a switch port with an associated SVI or a no switch port and IP address), but it's got to be able to run OSPF. Can I do this with LAN base on this series switch? Or do I need to go for a higher series (3560?). I *could* get away with static routes, but my boss is walking death on them unless I can 100% prove they're necessary, so I'd rather not right that fight!
View 5 Replies
View Related
Sep 10, 2012
My 2960-24TC-L switch is startet up and shows up: switch.Have tried to upload new image with xmodem without success.There must be a procedure to upload the new image, I have looking for hours and can not find the procedure.
View 3 Replies
View Related
Sep 12, 2011
I would like to save power by scheduling the PoE switch ports on my switches to shutdown every night and turn on at a specified time during day.
View 6 Replies
View Related
Oct 5, 2011
I would like to ask you that how can i know detail P/N on switch WS-C2960-24PC-S I want to know detail what is PC-S and some swith LC-S
View 2 Replies
View Related
Oct 27, 2011
what is difference btw c2960-lanbasek9-mz.122-44.SE1.bin with c2960-lanbase-mz.122-44.SE1.bin.I found that these two IOS are available in below link and both two are released in same time... [URL]
View 2 Replies
View Related
Dec 29, 2011
I upgrade the IOS for switch c2960 and the switch do not boot from the new image.See the files attached.
show version
show boot
show flash
There is a mistake with settings?
View 3 Replies
View Related
Feb 26, 2013
I have a 3com 2948 switch and is needing to put the configuration on a Cisco WS C2960 48 port switch. I am attaching the config to heck if that is correct. I know my IP will need to change to .123
View 7 Replies
View Related
Apr 23, 2013
I have a C2960-24TT-L Switch with the following problem:When the Power Cord is plugged in the Switch, all switch indicator LEDs go on very briefly. Then SYST LED blinks very briefly, goes on steady and remains at this state without any indication at the console.Tried the reset by holding the MODE button while plugging in power but I still get no indication at the console. All is fine with console, meaning that if I take out the cable and plug it in another switch, then I see all that there is there to be seen.My question: Is the switch beyond repair or is there something that can be done to get the switch to run POST and boot at rommon so that I can reload SW and configs?
View 3 Replies
View Related
Feb 7, 2012
I've got a C2960 (sw01) and a C2948. (sw02) The sw02 switch is trunked with sw01, and is meant to serve as an extension to the VLANs (1-4) that exist on sw01. It is trunking properly, however, how would I go about giving the sw02 an IP so that I can access it via SSH? Would I have to create a VLAN specifically on sw02 with an ip and switchport an interface to use it? I know that a VLAN can only have a single IP, but I'd like sw02 to have an IP on VLAN1 (192.168.1.0 subnet), is that possible?
View 5 Replies
View Related
Feb 14, 2012
i am trying to upgrade the firmware in my C2960 switch to 15(1) SE2, and i get the error:Failed to execute the command archive download -sw /overwrite /http iosFile
View 2 Replies
View Related
May 12, 2013
It looks like pretty basic config, but it does not work. I have 1x 2602i autonomous mode AP, 1x C2960 switch (with inter-vlan routing prefered SDM template) and 1x 1841 router.
I trunk between Switch and Router works smoothly, but it does not work between AP and Switch or AP and Router.
Configuration looks like this:
AP2602i:
interface GigabitEthernet0
no ip address
duplex full
speed 100
[code]....
View 12 Replies
View Related
Jul 27, 2011
I m unable to take backup of Switch c2960 using
#Copy flash: tftp
while i m taking it show some error
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
sh flash:
Directory of flash:/
2 -rwx 1919 Mar 1 1993 10:27:17 +05:30 private-config.text
3 -rwx 11056 Mar 1 1993 10:27:17 +05:30 config.text
4 -rwx 804 Mar 1 1993 05:30:42 +05:30 vlan.dat
6 -rwx 2072 Mar 1 1993 10:27:17 +05:30 multiple-fs
7 drwx 192 Mar 1 1993 05:37:02 +05:30 c2960-lanbasek9-mz.122-44.
SE6
View 1 Replies
View Related
Feb 20, 2013
Is it possible to configure both Catalyst WS-C2960-24PC-L and Switch Cisco SG300-28 to work together for VLANs for voice and data ? If yes, can you give me the resources which I can refer to ?
View 4 Replies
View Related
Nov 8, 2011
I upgraded the newest IOS 15.0(1)SE for our SW C2960-24-TT-L, the process was succeseful. However, we found SW memory utilization raised to 82% this morning in normal situation. (Momery: Total 21341260, Used17471692) Did you guys meet the same problem after upgrading to 15.0(1)SE? I also would like to know what the normal memory utilization is? and what is the impact of memory utilization highly?
View 8 Replies
View Related
Dec 15, 2012
does the WS-C2960-24TT-L switch support power over Ethernet ?
View 2 Replies
View Related
Jun 24, 2009
in a customer project we are evaluating if it's possible to connect from cisco ios switches via "ssh -l <user> <ip address>" to an enterasys n series dfe modul which is running a ssh server v2.
Unfortunately this doesn't work as expected, every connection attempt is resetted.We did a trace of the ssh connection attempt where you can see that there is some problem in the algorithm negotiation (see attachment).
Equipment/OS:
- Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(44)SE1
- Enterasys 7H4382-49, Fw: 05.42.10
View 3 Replies
View Related
Apr 8, 2012
I want to know what is the different between IOS of the catalyst WS-C2960-48PST-S and the IOS of catalyset WS-C2960-48PST-L.a want to upgrad the IOS of a WS-C2960-48PST-S with the IOS of WS-C2960-48PST-L (because this reference has a LANBASE version of IOS).
View 4 Replies
View Related
Oct 11, 2012
I'm somewhat new to networking so bare w/ me if I get some of the verbiage incorrect. We are trying to upgrade our 2960G's to a new version of code (c2960-lanbasek9-mz.150-1.SE.bin).After doing:switch(config)#boot system c2960-lanbasek9-mz.150-1.SE.binand a write mem, we did a reload, but the new version didn't take. We realized that the boot loader version is too old to accept this newer IOS. Here is the how version output:[CODE]
View 7 Replies
View Related
Oct 2, 2011
I have this OID "1.3.6.1.4.1.9.1.696", which is a "Cisco Catalyst 2960G-24TC" device. Where can I find the corresponding MIB tree with availabe methods?
View 2 Replies
View Related
Oct 1, 2012
I have a switch 2960-24TC-L with GEC (realised with 2 giga interface uplink) with switch 3750. the configuration is ok, the GEC is up and other feature working. I try to upgrade 2960-24TC-L from 12.2.44SE6 to 12.2.46 or 12.2.5x or 15.0.x...the upgrade it's ok the swithc boot..and the configuraiton is same.. but the giga 0/1 and 0/2 on 2960 not bring up....and the better the interface on 3750 are up.
View 3 Replies
View Related
Feb 15, 2012
We have a Cisco 2851 router that crashes every night. Below is the 'show log' output. The provider is telling us that it is our equipment. We have replaced the router and still have the same problem. Is it our equipment or the provider?
Feb 15 19:29:43: %BGP-5-ADJCHANGE: neighbor x.x.x.x Down Interface flap
Feb 15 19:29:43: %BGP_SESSION-5-ADJCHANGE: neighbor x.x.x.x IPv4 Unicast topology base removed from session Interface flap
Feb 15 19:29:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to down
Feb 15 22:34:13: %CONTROLLER-5-UPDOWN: Controller T1 0/0/0, changed state to down (LOS detected)
Feb 15 22:34:15: %LINK-3-UPDOWN: Interface Serial0/0/0:0, changed state to down
View 6 Replies
View Related
Jul 24, 2012
My Cisco Catalyst 2960G-24TC-L is broken.Yes,I think it's broken.
1.Always dispaly : “ !!! WARNING: The switch is not usable !!! ” “Unable to create l2trace server process, socket_open() failed”.
2.All GigabitEthernet is missing .
Switch(config)#interface ?
Async Async interface
Auto-Template Auto-Template interface
[Code].....
View 5 Replies
View Related
Dec 24, 2012
My DCS-942L is almost always in night mode with IR on resulting in a B/W picture. Only when the light is very bright it changes to day mode. How to adjust the day/night threshold?
View 11 Replies
View Related
Jan 10, 2012
I've got a sky router at home with some devices connected wireless and some on cables. I want to be able to disable some devices at night so the kids cant go online with Xbox's and PC's at night.I dont want to just turn off the router as I want to go online at night.
View 1 Replies
View Related
Oct 30, 2012
As the title says, I would like to know what are some ways in which a group of computers on a network can be imaged at the same time over night. The reason this must be done is because in the training room at where I work, each different training session configures the computers differently, so it would be nice to have them all start off from the same point, rather than a new instructor having to learn all of what the previous instructors had done to the computers.I know some ways in how to image multiple computers. A little background on the environment:
About 15 computers connected a cross a network
Must be repeatable, and remain available (no dismantling)
Image will be Win7 32 bit, with applications already on it
Must be able to run, and complete over night
The image must be pushed out from one computer to all of the others
The OS of the computer doing the pushing can either be Win7 or XP
View 1 Replies
View Related
Sep 16, 2012
my internet works normally during daytime but starts to disconnect and reconnect every few minutes at around 11pm. I've tried restarting my modem but to no avail. My home telephone line is not working when my internet starts disconnecting and it starts working during daytime. My modem is connected to the telephone.
View 4 Replies
View Related
Jul 19, 2011
Recently, my PC has been losing connection to the internet at 1am.It doesnt tell me its lost connection and when i repair the connection it says that it has been repaired - but nothing will connect to the internet and the Zone Alarm symbol stays static instead of its usual green/red activity bars to let me know data is moving in and out.
My xbox is fine all of the time and the other computers in the house are also fine when i checked them at night.- I also checked the ethernet cable from my pc to my xbox to see if that could be the issue - but the xbox worked fine with it.
[code]....
View 7 Replies
View Related
Jan 16, 2011
I'm running Windows 7 64 bit with a Linksys WAG 320N modem.
The last few days my internet disconnects every night at roughly 12:30. I have checked my wireless drivers in devices and the part to automatically disconnect is unticked.
I can't find anything in the modem to automatically shutdown
View 6 Replies
View Related
