Cisco :: Waiting To Initialize State In LMS 3.2
Jun 13, 2011
About 1-5 times per week I will find the jrm process showing as "Administrator has shut down this server". I have written a script that 2/day checks the status of the jrm process and if it is down, restarts it (pdexec jrm). About 25% of the time the jrm process will then show a status of "waiting to initialize". The only way I have found to recover it to shut down CiscoWorks and restart it (takes about 25 minutes). Why it would shutdown or how to get it restarted after the initializing state?
View 7 Replies
ADVERTISEMENT
Jun 20, 2011
At the beginning we had 2 issues:
1. net start crmdmgtd did start correctly, so we use resetcasuser.exe and it works some minutes then this issue came back again. I ask the customer to put the casuser in the local administrator group, then customer was able to execute net start crmdmgtd.
2. but some process doesn't start see pdshow.txt.When trying to launch ciscoview, we have this error :Error in communicating with DCRServer. DCR Server may be down. Please start the DCRServer and then refresh the page.At RME home page, I have a error message about jrm, but I don't remerber it.
In the pdshow, we can see that DCRServer is in Waiting to initialize state.We have installed the fix for CSCte49301 bug, but the issue still exist you will find dcrserver.log and dcrclient.log.
View 5 Replies
View Related
Jan 29, 2012
We are using CWLMS 2.6 on a UNIX machine. And recently we changed the SNMP String to our network devices. One of L2 switches keeps logging the following message:
%SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 10.x.x.1
Where 10.x.x.1 is ciscoworks LMS server. I found a solution on many sites that suggest resetting DFM database. I stopped first the daemon manager and tried to apply the perl script:
perl dbRestoreOrig.pl dsn=dfmInv dmprefix=INV npwd=cisco
but it gives me the following error:
Can't locate CRM.pm in @INC (@INC contains: /usr/perl5/5.6.1/lib/sun4-solaris-64int /usr/perl5/5.6.1/lib /usr/perl5/site_perl/5.6.1/sun4-solaris-64int /usr/perl5/site_perl/5.6.1 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.6.1/sun4-solaris-64int /usr/perl5/vendor_perl/5.6.1 /usr/perl5/vendor_perl .) at dbRestoreOrig.pl line 31.
BEGIN failed--compilation aborted at dbRestoreOrig.pl line 31.
CRM.pm already exists in the path ENV{NMSROOT}/lib/perl/db
At line 31 of dbRestoreOrig.pl – the error – I found the following:
push(@INC, "$ENV{NMSROOT}/cgi-bin/dbadmin/pdbadmin");
use lib "$ENV{NMSROOT}/lib/perl/db";
I gave the system the path of NMSROOT and run the script again but it gives me the same error “Can't locate CRM.pm”
View 8 Replies
View Related
Dec 26, 2011
I have a netgear router installation cd but everytime i click setup it say MDM_Utility will not initialize.
View 1 Replies
View Related
Aug 28, 2011
IPv6 -> Tunneling.The 6to4 tunnel did not initialize after a reboot. The automatic tunneling had to be disabled and enabled again.It was used for a 6in4 tunnel to tunnelbroker and the Remote End Point IPv4.Address was enabled and specified.
View 1 Replies
View Related
Mar 6, 2012
my machine is set up to dual boot Windows XP Professional Edition and Windows 7 Home edition. I had Windows XP installed on this machine first because it is 10 years old and I wasn't sure how well it would work with Windows 7. I decided to test out Windows 7 a few months after using Windows XP on here and noticed the wireless network was started right when Windows 7 loaded, where as in Windows XP it can take anywhere from 1-3 minutes for the wireless network to load. In this 1-3 minute time frame on Windows XP any browser or attempted connection to the internet 'hangs' and does not display a time out, it just continues to try and connect until the wireless icon finally shows in the taskbar
View 2 Replies
View Related
Feb 27, 2012
Get the message initializing and then it hangs when I insert the sim card. Have a Rogers wireless stick. a Latitude 2023.
View 3 Replies
View Related
Oct 31, 2010
I replaced an ACS certificate that had been installed as follows:
1. Generate CSR file and private key file, then send CSR to GeoTrust (Key length: 2048 and Digest to sign with SHA1)
2. GeoTrust send me a certificate. Issued by "GeoTrust SSL CA".
3. Install the certificate on the ACS. Restart ACS service.
4. ACS Certification authority setup. Issued by "VeriSign Class 2 Public Primary Certification Authority - G3"
5. Edit certificate trust list and select "VeriSign Class 2 Public Primary Certification Authority - G3" as trusted.
6. Enable EAP-TLS, then restarted the ACS service. The problem is when i try to enable EAP i get the error msg:Failed to initialize PEAP or EAP-TLS authentication protocol because CA certificate is not installed. Install the CA certificate using "ACS Certification Authority Setup" page.I searched on cisco and it said to disable the CSA, but in fact there is no CSA installed on this server.
OS: Win 2003 sp2Cisco ACS: Release 4.2(0) Build 124
View 4 Replies
View Related
Jun 26, 2011
I'm trying to connect to a wireless network provided by a Sprint mobile hotspot. My computer is running XP SP3 and using a wireless USB adapter to do it. (802.1n)I can detect the network but when I try to connect using Windows I get the message "Windows waiting for the network to be ready." And apparently the network is never ready.I can also use the software that come with the adapter. That doesn't work because when I put in the password for WPA 2, the program saves a password that is far longer then the one I entered. Then I get the message "Authentication failed!" Well, duh.Then the computer tries to connect over and over with no results. "Trying to connect ... disconnected ... etc."
View 13 Replies
View Related
Nov 10, 2011
I'm running Win7 and have recently had problems at startup. Initially I thought this was a Skype issue as removing it seemed to work, but alas the problem remains with it uninstalled. The PC boots ok and I can open programs quickly enough, but if they need internet access they hang for 5mins or so before the block clears and all is well. I have recently changed ISP provider to BT Broadband (UK) and have a new router which sets itself up and had been working fine.
View 9 Replies
View Related
Apr 25, 2012
i havent been able to print anything wirless or even with the usb cord in about a wk. i can try to print out anything it will say printing or nothing and nothing happens. just when i search to see whats going on, its says that certain amount of documents are waiting/pending. ive canceled them several times. i also know about the printer spooler i fixed that and i thought that was it, cuz i was able to print a color page for my kids right after, but after that i wasent unless i did the spooler thing again. and i try to print something from any sight and pop up thing comes out ive just moved it today to allow only for secure sights only. also i i went into printer setup and software did what it asked and nothing still. im on this page now told me to check ip address printed out for wirless network and it shows but and i viewed the summary for wired and there nothing shows. oh it wont print anything i need to print but it does print automatically epicurious receipe everyday. i have a windows 7 hp computer and and hp officejet pro 8600 all in one printer. i have set up to wireless.
View 1 Replies
View Related
Aug 6, 2011
Situation: Slow internet access, after access keep getting waiting for HTTP, always see n items remaining.What can be done to speed up access?OS is windows 2003 R2, latest updates. [code]
View 15 Replies
View Related
Mar 18, 2011
I recently got wireless internet in my apartment but am having trouble connecting to it. The other computers in the apartment are having no trouble. The network appears in the wireless networks list, but after I enter the network key it just loads with the "waiting for network" message until it times out. I can connect to other wireless networks. It takes a long time to connect to these other networks but eventually does, My computer is super old, but since I can connect to wireless I feel like the computer is not the issue.
View 2 Replies
View Related
Apr 23, 2013
I was login with my "router password" to my EA4500 yesterday without problem, after I brought another EA4500 today and try to find out my existing EA4500 configuration.I just can't login..I mean it just stay forever on the "Waiting..." screen after I enter the "router password"
-no luck with changing browser, I try ie, firefox, chrome, is still the same
-no luck with other pc, I try login with another notebook or pc, is same..
-no luck with switch off, I try refresh button once, same..and try to turn it off 5 minute and try again..same
View 9 Replies
View Related
Apr 8, 2012
I've just purchased a new X3000 and have spent the last 2 days trying to set it up. I can connect to the router and see the settings via the default 192.168.1.1. However when I try to get an internet connection, I keep getting this message :"Timed out waiting for authentication server to respond. Please verify that you have a network connection or contact your network administrator for assistance (412)"I'm using my company-supplied VPN software to connect to my company network, and this is mandatory for me. Not sure if the issue is with this connection software.I bought the X3000 to replace my WAG160N, which was a breeze to set up compared to the X3000.
View 2 Replies
View Related
Feb 16, 2013
Its been half an hour now, what do i do?? I dont wanna screw up the router.
View 3 Replies
View Related
Oct 26, 2012
I have configured a portchannel with 3 ports - lacp active mode I want to pxe boot esx server with Hp Proliant DL 360 G7.
During Pxe Boot the physical Interfaces must be in (I) state - standalone.
The server receives via dhcp the ip but after getting the ip the link goes down for a short time and the switchport goes down and then in (w) state - waiting to be aggregated. Now the server tries to load via tftp the image but the server gets a timeout because the switchport is in state (w). It takes a long time til the switchport comes back in standalone mode (I).
Is it possible to modify the time how long the switchport is in the waiting to be aggregated state on 3750x ?
Would the right command be lacp rate-fast? But this command is not available on 3750x, only 6000 series.
View 0 Replies
View Related
Mar 20, 2012
What does the option WPA gtk-randomize State do when configuring Layer 2 Security under a new WLAN in a WLC (Code level 7.2)?
View 3 Replies
View Related
May 5, 2011
I want to configure an access RNIS with a router Cisco 1603.When I plug a cable in interface ISDN BRI with the command "ALL DEBUG EVENTS" start, I have this message : "BRI0 : changing state to F5", and after nothing. How the interface BRI 0 can arrive to State F7?
View 2 Replies
View Related
Oct 10, 2011
With LMS4.0.0 and upgraded to LMS4.0.1 all devices keeps in questioning state, also after some Rediscovers.We've got SNMPv3 and v2 devices, Windows Firewall is off, RME inventory works for most of devices.All DFM processes except of DFMCTMStartup are running, its also not possible to start DFMCTM Startup using pdexec, in DFMLogServer.log you will see a lot of "ogs_server_urn" not found.
What can we do to get the devices also running in DFM?
View 1 Replies
View Related
Dec 27, 2010
We have a Cisco 886 configured with two WAN's (ATM0 connected to a DSL line and Fa3 connected to a CMTS modem).We're running DMVPN over the Cable network and GetVPN over the DSL line. When the DSL line is down we see a lot of CPU peaks up to 90%.The CPU peaks are caused by the process "DSL state machine". As soon as the DSL line has sync and the ATM0 interface goes UP the CPU peaks disappear. What we'd like to know is if this constant extra CPU load will have an impact on other resources like normal routing & switching or more specific IPSEC handling. Is it for example possible that establishing an IPSEC tunnel will fail because of the CPU peaks?
View 11 Replies
View Related
Apr 15, 2012
Why this same kind of bug/error/software fault exist in LMS 4.2 as it was in LMS 3.2 ? Why after a while after discovery of devices (state is "Known") DFM drops the state of devices to "Learning" and it stucks forever. Restarting of daemon manager works for a short time. It looks like the processing of faults stops a while after discovery is complete.
LMS 4.2 is running on Solaris 10, connected to other LMS in DCR Slave configuration.
View 1 Replies
View Related
Oct 23, 2012
I would like to request assistance from all the gurus here for an issue i have with a Cisco 7513MX PSU. There probably arent many people who are aware of 7500 chassis as they are quite old.Isse: PSU 1 failed in chassis and we tried to replace it. Once replaced, we are getting the following output for it:
1#sh env all
Arbiter type 2, backplane type 7513MX (id 2)
Power supply #1 is TBD (id 0), Power supply #2 is 1200W AC (id 1)
We have been researching on the internet for answers but unfortunately due to the age of this model, there is very limited information available. We did find information which suggested to have BOTH PSU 1 & 2 with same revision. Right now the chassis is running only on PS2, we dont want to take down the chassis just to confirm the revision number on the PSU and there is no way to see that on the CLI. What we can do is get another pair of same revision PSUs, insert PSU1 first THEN take out PSU2 and then insert the same revision as PS1 in PSU2 slot but the moment we insert PSU1 in we get that TBD state which is not normal status and raises our doubts about putting the same revision PSUs with the method above, there is a chance that after we insert PSU1 in, the moment we take out PSU2, the chassis might not run on PSU1 due to its abnormal state.
View 5 Replies
View Related
Oct 8, 2009
i have an Issue with my cisco 2801.in the logs shown me the interface FE0/0 cames up some times but never show the down state, I receive my internet service on this interface but never lost the conection, just this logs information
Oct 7 18:39:32.412: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
Oct 7 18:39:41.448: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
Oct 7 21:57:20.775: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
Oct 8 02:29:31.350: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
Oct 8 02:55:12.362: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
[code].....
the IOS Version that is running is
flash:c2801-adventerprisek9-mz.124-24.T1.bin
View 4 Replies
View Related
Oct 10, 2011
I have this one device that is stuck in DFM Questioned state. The device is correctly discovered in CS and I have collected its configuration through ConfigMgmt (RME).I run Device Troubleshooting against it:
View 1 Replies
View Related
Apr 22, 2011
need to know how to change media state from disconnected to connected
View 1 Replies
View Related
Dec 29, 2010
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 19 devices in Not Managed state.
View 5 Replies
View Related
Sep 24, 2012
When opening LMS dashboard some histograms are in an open state .This is happening intermittently on supported versions of firefox and IE. LMS version 4.2.2.
View 1 Replies
View Related
May 7, 2011
I setup one location (business retail shopping center) in maryland (using swann dvr/cameras- will switch to qsee) with no internet available.I setup another location (business auto shop) in virginia (using qsee dvr/cameras) with internet through verizon fios.I have internet through cox at home in virginia which I can view cameras remotely only to one location in virginia.
View 2 Replies
View Related
Jul 15, 2011
I'm having trouble getting my evga 680i to wake on lan from a powered off state. I've done it before but for some reason now it doesn't seem to work. I have formatted since the last time I used wake on lan.
I've got all the settings right in the bios and everything. WOL is enabled in the networking properties on the adapter and in the bios. I can wake from a sleep or hibernate state - just not powered off. Using a WOL test client it confirms it is receiving the magic packet.
When my comp is off I dont see the network port light up with the LEDs. I imagine this has something to do with it -- i just dont know what had to go to power management on the configure tab of my network adapter and uncheck the box "allow windows to power off this device to save power" even though I also had under that checkbox "allow wake on lan" checked.
View 3 Replies
View Related
Apr 4, 2012
Ages ago I was shadowing someone making a change on the network. I cannot remember which spanning tree version was running and cannot remember the config of any port either. What I do remember is that every switch port on the 2960 switch went orange and an outage occured, where the ports went into listening / learning mode. I assume that the STP was just the default ieee 802.1D.
View 3 Replies
View Related
Jan 14, 2013
Cisco Prime 4.2. My device is stuck in Questioned state in Fault Management. The device though can be pinged from the server. Actually, I can already manage the device and have archived its configuration. Problem is, on Fault Monitoring Device Administration, its on Questioned state even though I already tried to rediscover the device several times.Do I need to configure something on the server like put in the IP address and hostname of the device in the host file of Windows Server 2008?
View 1 Replies
View Related
Jun 29, 2011
Running ASA5585’s in active/standby across a local campus MPLS network. Supported design, leading practice etc. Specifically our design is that two ASA5585 are configured as active/standby through a local campus MPLS network over 10gig links through ASR9k etc. The ASA’s are providing inter-vrf routing capability only with p2p l2vpn circuits configured for each logical interface between the ASA over MPLS etc.The failover link is via a direct fibre and the state link will be through a p2p l2vpn (option for direct fibre also)Is this a supported design to begin with?
View 2 Replies
View Related
