Cisco Wireless :: 1242 - Adding New AP To Network?
Mar 24, 2013
When I tried to add new AP 1242 to my network I had following problem:
The Ap was constantly reloading and I was getting message
Wed Mar 20 13:32:12 2013 AP 'UBFT-E06-F0A-R09-0022.901b.a6ba', MAC: 00:23:ab:27:1f:30 disassociated previously due to AP Reset.
%CAPWAP-3-IMAGE_DOWNLOAD_ERR3: capwap_ac_platform.c:782 Refusing image download request from AP - unable to open image file /mnt/ap_bundle/ap.pri//c1240
I decidet to reinstall software on WISM 2 modul (7.2.111.3) this fix the problem and AP joined controller but during this process I have lost connection to 87 AP for 3 seconds and then they joind back again.
"disassociated previously due to AP Reset"
View 5 Replies
ADVERTISEMENT
Nov 20, 2012
I would like to create a Mesh network using Cisco 1242 AP's running in Autonomous mode via A Channel.
View 5 Replies
View Related
Oct 15, 2012
I have a Cisco 1242 AG wireless access point with the goal of having multiple SSIDs. I set up one network which broadcasts correctly but only sometimes can I connect to it.
And, even if I connect to the network, I cannot get a DHCP address for the client.Other devices connected (but not through this Access Point) to the associated VLAN 60 can get a DHCP address and connect just fine.Here is the configuration for the Cisco 1242 AG access point in question: [code]
Lastly, here is the information on VLAN 60 from the distribution switch. As mentioned, other devices connect to this VLAN and get IP addresses just fine.
View 11 Replies
View Related
Jan 4, 2011
I own a Panasonic DMP-BD80 Bluray player. It has both an ethernet connection and a USB port. I'd like to add the Bluray player to my wireless network but I don't know what equiptment to buy or how to install it.
View 4 Replies
View Related
Jul 5, 2011
the pc im trying to connect to a wireless network was previously on but when the OS was changed it failed to connect back on the network. what should i do?
View 1 Replies
View Related
Jan 11, 2013
I'm trying to add a new laptop to our current wireless network. I need the security key and an easy way to locate it.
View 1 Replies
View Related
Mar 3, 2011
I am not a tech person, so I apologize if this is a dumb question. Tech supportme because no one wants to comment on if/how to attach equipment manufactured by some other company.I have a wireless home network using a Netgear DGN2280 router/modem. I also have an HP Officejet 5800 printer that I would like to add to the network. This is a USB printer that DOES NOT have a network card of any kind.I have heard of a print server, and know that it obviously has to do with hooking a printer to a network, but don't know if it will work in my application. Will this work for me?I just now noticed that there is a USB port on the back of the router/modem. can I hook my printer up to that port (and leave it hooked up) and print across the wireless network? I don't care if my printer has to be wired to something. I would just prefer that my laptop not have to be wired directly to the printer.
View 5 Replies
View Related
Jan 10, 2011
I have recently reset my SMC 2804WBRP-G Router because I forgot my old WEP Key. Now when I set a new key, my wireless devices will not connect to the router.
It works fine without securing the router with a key, but I don't want my neighbors stealing my Internet bandwidth.
View 6 Replies
View Related
Jan 22, 2013
We have a wireless router, (Dlink DI-524, a couple of years old, and all the cables), and I have a basic knowledge of networking, such as DHCP servers and so on, but I don't know how to set it up. We have a working LAN port, so access isn't a problem. And we know the server address. As much as we'd like the IT dept. to do it, or to at least tell us how, they're unbelievably lazy and won't do either.
View 2 Replies
View Related
Apr 1, 2013
I have a Airnet 1600 Series that I want to add as another repeater to our 1200 series 802.11g network. We already have 2 AP's running fine as Repeater and BR, I just need to a this 1600 AP to the existing wirelss. Everytime I try to change the 1600ap as a repeater, I get the below error.
cannot set role in radio network to when another radio is set to one of the above roles
View 1 Replies
View Related
Nov 16, 2011
I have a Linksys WRT54G2 router upstairs in my house that wirelessly reaches the entire house. I also just bought a Linksys Valet Plus M20 that will be my router once I get it in the mail. The problem is I want to hook up my downstairs Satellite receiver to the internet but it only has a LAN port. I cannot run a LAN cable downstairs. Is there any way to link these routers up wirelessly and then run a LAN cable to my SAT receiver? Or do I need to buy a different product?
View 1 Replies
View Related
Apr 9, 2012
I have practically NO knowledge of networking! So I've been tearing my hair out trying to get this darn thing sorted but to no avail.So, I've bought a Samsung BD-E5500 blu-ray player which has internet capability either through Ethernet or a Samsung wireless adapter. I am not willing to spend an extra £40-£70 on an adapter and obviously don't relish the idea of running a very long cable to my router upstairs. However the general concensus is that it's possible to take a cable out of the Ethernet and into a wireless AP or router, using it as a bridge to the main wireless router. So I have tried this and failed, of course not having a clue as to what I'm really doing. I have a Netgear ME102 access point which the player can't seem to get on the network with at all and also I have tried using a Belkin F5D7632 wireless router. Now, with the Belkin router the player does say that it can access the network, however it says that it cannot access the internet. The wireless router that I have upstairs is an O2 Wireless Box 3.
View 3 Replies
View Related
Feb 17, 2011
ive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies
View Related
Dec 22, 2011
Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
View 2 Replies
View Related
Mar 25, 2011
i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 Replies
View Related
Aug 28, 2011
I have a home network with an older desktop, two laptops, couple of PDA and now a cellphone. I'm using using a WRT 110 router I bought new a couple of years ago. It run flawlessly even when I switch from DSL to Comcast Internet.My printer (HP All-in-one) is currently attached to the rear of my desktop and if I want to print anything I have to fire up the desktop. Can I plug the printer in the WRT 110? Be able to print form my laptops?
View 4 Replies
View Related
Dec 27, 2010
Here's the setup:
DGL-4100 (wired gigabit router)
-> Wii
-> X360
-> PS3
-> DGS-2205 (wired gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522 (wireless access point/bridge)
Now, we're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. I tried entering the SSID manually, and nothing can find it.
View 2 Replies
View Related
Sep 23, 2012
Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
View 10 Replies
View Related
Nov 19, 2012
We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).
WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :
[URL]
Is AIR-CAP1552E-x-K9 with three external dual band antennas enough for 2-GHz b/g/n local access and 5-Ghz back haul?
Does 1552 Mesh AP work with 1522 Root AP?
View 1 Replies
View Related
Jan 5, 2012
I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users. The main router is a RouteFinder SOHO VPN (RF560). The RouteFinder acts as a gateway and provides DHCP. I do not want to change it's role or settings. When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet. As a quick fix as I was working on something else at the time, I just unplugged the E3000. Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do. Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all??? By the way...I am located in another state than this router and network. I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely.
View 7 Replies
View Related
Oct 26, 2010
I have an existing wireless network using a Cisco/Linksys WRT400N wireless router (which in turn is connected to a cable internet provider). I need to extend my wireless coverage and so purchased a Cisco/Linksys E1000 to act as an additional access point. Purchased from BB, the local 'geek squad' rep instructed me to follow the users guide for the set up. After login into the admin service on my E1000, I followed the 'Advanced Routing' instructions and disabled the 'NAT' option and subsequently enabled the 'Dynamic Routing (RIP)' option. Everything worked like a charm to this point, but now I'm stuck. What steps do I need to follow to allow clients to log onto my wirelss network via the E1000 (secondary access point)? I've established WEP security keys on the WRT400N (primary access point) and want to use the same network security parameters on the E1000.
View 9 Replies
View Related
Apr 5, 2011
My problem is the whole network (router / switches) is located in one end of the office building and the printer is located in the other end. Its a big multi functional printer with copy, scan etc. At the momemt we have a loooong network cable running on the floor from the one end to the printer.
Unfortunately we dont have an easy way to install cables above the rooms and that way connect the printer via cable to the other end of the building so I need some sort of wireless solution.
The range is approx 20 meters.
I was thinking of installing a wireless router in the printer room and then some wireless adaptors in the pc's (they dont have wireless cards at the moment). But can the pc's have trouble-free connection to both lan and w-lan at the same time ?
View 4 Replies
View Related
Dec 26, 2011
I'm using two cisco 1242 AG access points to configure WDS feature. I've named the accesspoints as AP1(acts as WDS) and AP2. Since I've only two accesspoints, I've configured the AP1 to act both as a WDS and as a regular accesspoints.Further I'm using the local radius server within the AP1 to authenticate both clients and infrastructure accesspoints. And both APs are connected to a router (which act as a dhcp server) via a unmanageble switch and both accesspoints are getting registered with WDS.But the issue is when I tried to connect to the configured SSID, it promts me a "authentication window" but after entering the configured username and password, i'm not getting authenticated by the AP.
I've attached the configurations of both APs to for your reference and I've used the following cisco document as a guideline to crate the WDS. [code]
View 3 Replies
View Related
Mar 4, 2013
I'm having a little issue with some Cisco Aironet1242ag WAP's. I receive a call at least twice a month stating that some of the WAP's are not giving out internet connection. What I always do is go to my patch panel and disconnect those WAP's not working and connect them back again so they can power cycle. These WAP's are connected to a Cisco3750g. Once the WAP's boot up, the users can connect to the WAP and connect to the internet.
I don't know if these WAP's are filling up with some information that causes the access points to not connect to the WAN.
View 15 Replies
View Related
Apr 18, 2011
Is it possible to make a bridge using a 1242 and a 1310? I have been able to get them to associate together and it appears it will function as a bridge. I have the 12(4) 253 JA IOS for both devices. I would like to use the g antenna on the 1242 for the bridge and the a antenna for wireless clients. The configuration on the web management appears to support bridge root and non root for both devices.
View 2 Replies
View Related
Sep 12, 2011
I am trying to upgrade an autonomous IOS 1242 AP to LWAPP and I am having an issue with finding the right code to complete the upgrade. I have upgraded the AP to c1240-rcvk9w8-tar.124-21a.ja2.tar, but now I think I need a JX version of code to have it join a controller, and I can't find this anywhere on the Cisco site.
View 5 Replies
View Related
May 9, 2012
i have 1240 series access points which is not joining controller 5500 series. [code]
View 12 Replies
View Related
Aug 13, 2006
i need to change the IOS in a Ligthwiegth Access point and make it work as an Autonomus AP 1242. I have got the image but im not realy clear about the process. I got to enter the Ligthwiegth Access point true the console port but i dont know how is the upgrading process.
View 6 Replies
View Related
Jun 6, 2012
One of Cisco Wireless AP 1242 installed in my premises restarts itself; AP is getting power from Catalyst 2960 POE. I am using multiple SSID on this AP. I have issued the show tech-support. I have seen below in tech-support System was restarted by unknown reload cause - reason ptr 0xF, PC 0x46FEB8, address 0x0? what could be the reason of restarting of AP. AP is in production since 1 year and it restarts seldom.
View 2 Replies
View Related
Feb 9, 2011
I have 3 Cisco 1242 WAPs that I have deployed at a site that has NO RADIUS/AAA devices. I have given all of them a different channel (1,6,11), but the same SSID and crypto (WPA2-PSK). The issue is when a machine boots up it associates with the closest/strongest AP, but as the device "roams" it does not which to a different AP. It stays associated with the original AP until that signal is gone. Then it quickly associates with the closest AP with no problem.
How do I get the device to associate with the strongest WAP? I have research "fast roaming and WDS" but it seems like you need EAP/LEAP and they do NOT have that at all.
View 3 Replies
View Related
Oct 15, 2012
I have Eight AIR-AP1242AG-E-K9's accross our site that have 2 SSID's and 2 VLAN's that work well, I want to link one of the AIR-AP1242AG-E-K9 to another one using 5ghz patch antennas across a 50 metre gap, but I am puzzled on how to do this, as to create a root bridge and a non route bridge link I need to put the infrastucture SSID on and this must be on VLAN1 but I want the traffic from both VLANs to pass over this link. I just want to ensure the config will work as I need to go into a cherry picker to get to the non-root-bridge.
View 11 Replies
View Related
Apr 11, 2012
We currently have 8 1242's and they all work fine, however we recently baught one 2nd hand one which was previously connected to a WLC, it lights up fine but it wont detect in IPSU even though the dhcp has assigned an IP to it. I would like to login through the web page to configure it but I am not able to do that either. It responds to ping fine though. So I no longer wont it be a LAP, so I tried to console in, to run flash_init etc. but when I try and give the <ESC> command (during the flash loader) it just carries on and ignores all input. I have used the correct settings Baud rate 9600, no parity, no flow control , databits 8, etc. but nothing happens it just goes through the boot and then asks me to press enter to input. i can then browse the directories and rename files. but I just cant get it to holt the loader so I can reset, I tried rename of config.txt and env_vars but that has't worked either. It keeps stating that it is looking for LWAPP/CAPWAP but unfortunately we don't have a WLC Is there another way I can reset it or is there some magic way in whic I can send the ESC command.
View 4 Replies
View Related
Jun 5, 2013
I encounter a strange problem on several AP 1242 in version 12.4(25d)JA1 of a customer : He has 10 autonomous AP covering The APs loose LAN connectivity randomly and therefore the clients don't work anymore. The AP are connected on a 2960 and a 3560 wich are in turn connected on a 3750 wich route the trafic.After checking spanning-tree no loops are present. When I check the counters on the AP involved I see the "trhottles" and "ignored" counters incrementing on the fa0 link of the AP impacted wich mean I think it can't handle the incoming traffic. This incoming traffic seems not to be too big however. I can see drops on the switch interface connecting the AP.
View 2 Replies
View Related
