Adding A Blu-ray Player To The Wireless Network

Jan 4, 2011

I own a Panasonic DMP-BD80 Bluray player. It has both an ethernet connection and a USB port. I'd like to add the Bluray player to my wireless network but I don't know what equiptment to buy or how to install it.

View 4 Replies


ADVERTISEMENT

Samsung BD-E5500 - Adding Blu-ray Player To Wireless Network

Apr 9, 2012

I have practically NO knowledge of networking! So I've been tearing my hair out trying to get this darn thing sorted but to no avail.So, I've bought a Samsung BD-E5500 blu-ray player which has internet capability either through Ethernet or a Samsung wireless adapter. I am not willing to spend an extra £40-£70 on an adapter and obviously don't relish the idea of running a very long cable to my router upstairs. However the general concensus is that it's possible to take a cable out of the Ethernet and into a wireless AP or router, using it as a bridge to the main wireless router. So I have tried this and failed, of course not having a clue as to what I'm really doing. I have a Netgear ME102 access point which the player can't seem to get on the network with at all and also I have tried using a Belkin F5D7632 wireless router. Now, with the Belkin router the player does say that it can access the network, however it says that it cannot access the internet. The wireless router that I have upstairs is an O2 Wireless Box 3.

View 3 Replies View Related

Wireless :: Connecting Blu-ray Player To Network

Feb 27, 2011

I have a PC network in house using a netgear router. One of the PC is cable-connected to the router and the other using wireless network adapter. Now I have a Sony Blueray player which support network connection. How do I connect it to the network?

View 1 Replies View Related

Magnavox MBP5130 / F7 Blu-ray Player Not Connecting To Wireless Network

May 5, 2011

I recently purchased the Magnavox MBP5130/F7 Blue-Ray player. I have been trying to get the player to connect to my wireless network so that I can stream Netflix. I am using a Linksys router. It seems to be a similar problem to the one that Adie of Texas was experiencing. I looked through that thread and did the same things but still cannot get it to connect to the internet. It will connect to the wireless network but will not connect to the internet. The first night I purchased it I some how got it to connect and it updated. Since then I have been out of luck.

View 5 Replies View Related

Home Network :: Can't Establish A Wireless Connection To / From Media Player

Apr 19, 2011

Trying to establish a wireless connection from WD TV Live Plus unit to Westell 327W router using an AirLink 150 adapter. The media player sees my network and seems to have a good signal, but keeps telling me "limited or no connectivity." The media player (with adapter) is about 20 feet from the router with direct line-of-sight.Also, 3 other Wi-Fi devices having no problem connecting anywhere in the house.Power down/power up, move adapter to alternate USB port, re-try connection multiple times.

View 4 Replies View Related

Linksys Wireless Router :: E3000 - Unable To See Network Media Player

Jul 26, 2010

I am unable to see my network media player (wired CAT6 or wireless) using the SAMBA Share feature.  My UPNP works fine.  I do not have this issue when I am using the Linksys WRT54G or a Netgear WNDR3700 (I returned it to give the E3000 a try) - so I know all my share persmissions and device firewall is turned off.  How do I get it to work with the E3000?  I want to be able to transfer and stream media files to my media player using SAMBA.  Usually my network media player automatically detects SAMBA Servers/Devices and adds it to its list for me to access.  But when I use the E3000 that is not the case.

View 4 Replies View Related

D-Link DIR-615 :: Connect Blu-Ray Player To Network

Feb 11, 2011

I've bought a D-Link DIR-615 Wireless N Router. I have a SONY BDP-S370 Blu-ray player with a LAN socket.

I have my Dell Inspiron laptop working on Windows 7 (with LAN socket and wireless N card). I have a HTC Desire phone. I use my HTC Desire as a WI-Fi hotspot to connect to the internet.

I would like to plug the router to the Blu-ray player so that I can use the internet connection broadcasted by my phone. I would also like to be able to access the contents of my laptop on the Blu-ray player through the wireless router.

View 3 Replies View Related

Creating Network Bridge Between PC And Blu-ray Player Via LAN Connection?

Mar 10, 2011

I am having trouble creating a network bridge between my PC and Blu Ray player via LAN connection. I have done it before, but always run in to problems. I took my computer on vacation and messed up the existing connection and settings. Last time I successfully created the connection, I stumbled upon the answer, but can't remember how I fixed it. I should say that I can create the bridge, but once I do, the wireless internet connection no longer works, and my blu ray player can't connect to the internet either. I have forced compatibility mode on the wireless network via DOS, but no luck. I did the same on the LAN connection just for the heck of it. Still no luck.

View 10 Replies View Related

Adding A Computer To A Wireless Network?

Jul 5, 2011

the pc im trying to connect to a wireless network was previously on but when the OS was changed it failed to connect back on the network. what should i do?

View 1 Replies View Related

Adding New Laptop To Wireless Network?

Jan 11, 2013

I'm trying to add a new laptop to our current wireless network. I need the security key and an easy way to locate it.

View 1 Replies View Related

Adding Printer To Wireless Network?

Mar 3, 2011

I am not a tech person, so I apologize if this is a dumb question. Tech supportme because no one wants to comment on if/how to attach equipment manufactured by some other company.I have a wireless home network using a Netgear DGN2280 router/modem. I also have an HP Officejet 5800 printer that I would like to add to the network. This is a USB printer that DOES NOT have a network card of any kind.I have heard of a print server, and know that it obviously has to do with hooking a printer to a network, but don't know if it will work in my application. Will this work for me?I just now noticed that there is a USB port on the back of the router/modem. can I hook my printer up to that port (and leave it hooked up) and print across the wireless network? I don't care if my printer has to be wired to something. I would just prefer that my laptop not have to be wired directly to the printer.

View 5 Replies View Related

SMC 2804WBRP G - Adding WEP Key To Wireless Network Router?

Jan 10, 2011

I have recently reset my SMC 2804WBRP-G Router because I forgot my old WEP Key. Now when I set a new key, my wireless devices will not connect to the router.

It works fine without securing the router with a key, but I don't want my neighbors stealing my Internet bandwidth.

View 6 Replies View Related

DI-524 - Adding A Wireless Access Point To A Network?

Jan 22, 2013

We have a wireless router, (Dlink DI-524, a couple of years old, and all the cables), and I have a basic knowledge of networking, such as DHCP servers and so on, but I don't know how to set it up. We have a working LAN port, so access isn't a problem. And we know the server address. As much as we'd like the IT dept. to do it, or to at least tell us how, they're unbelievably lazy and won't do either.

View 2 Replies View Related

Cisco Wireless :: 1242 - Adding New AP To Network?

Mar 24, 2013

When I tried to add  new AP 1242 to my network I had following problem:
 
The Ap was constantly reloading and I was getting message
                  
Wed Mar 20 13:32:12 2013 AP 'UBFT-E06-F0A-R09-0022.901b.a6ba', MAC: 00:23:ab:27:1f:30 disassociated previously due to AP Reset.

%CAPWAP-3-IMAGE_DOWNLOAD_ERR3: capwap_ac_platform.c:782 Refusing image download request from AP - unable to open image file /mnt/ap_bundle/ap.pri//c1240          
 
I decidet to reinstall software on WISM 2 modul (7.2.111.3)  this fix the problem and AP joined controller but during this process I have  lost connection to 87 AP for 3 seconds and then they joind back again.
         
"disassociated previously due to AP Reset"  

View 5 Replies View Related

WRT54G2 - Adding Wired Connection To Wireless Network?

Nov 16, 2011

I have a Linksys WRT54G2 router upstairs in my house that wirelessly reaches the entire house. I also just bought a Linksys Valet Plus M20 that will be my router once I get it in the mail. The problem is I want to hook up my downstairs Satellite receiver to the internet but it only has a LAN port. I cannot run a LAN cable downstairs. Is there any way to link these routers up wirelessly and then run a LAN cable to my SAT receiver? Or do I need to buy a different product?

View 1 Replies View Related

Adding Additional Items To Existing Wireless Network?

Feb 17, 2011

ive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?

View 1 Replies View Related

Home Network :: Media Player Asking For Username / Password For Windows 7 And 8 Computers

Jan 22, 2013

I have a media player on my home network, which consists of 3 desktop pcs (1 xp home, 1 win 7 home p, and 1 win 8 pro) and 2 nas boxes. Nothing is wireless, all cabled. All pcs can talk to each other and the nas boxes, all have internet access.Problem is when I try to access pc files with my media player. It can access the nas boxes and the xp pc fine, but when i attempt the win 7 or 8 pcs it asks for ausername/password. The win 8 pc has both, but the media player wont accept them, and the win 7 pc has never had a password. I tried putting a password on the win 7 pc, but the media player rejects the user and pw.

View 4 Replies View Related

Routers / Switches :: Adding A Wireless Conection To Existing Network

Dec 22, 2011

Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.

View 2 Replies View Related

Adding 2nd Wireless Router To Network In Order To Extend Range?

Mar 25, 2011

i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.

View 5 Replies View Related

Linksys Wireless Router :: WRT 110 Adding Printer To Home Network

Aug 28, 2011

I have a home network with an older desktop, two laptops, couple of PDA and now a cellphone. I'm using using a WRT 110 router I bought new a couple of years ago.  It run flawlessly even when I switch from DSL to Comcast Internet.My printer (HP All-in-one) is currently attached to the rear of my desktop and if I want to print anything I have to fire up the desktop. Can I plug the printer in the WRT 110?  Be able to print form my laptops?

View 4 Replies View Related

Cisco Wireless :: Adding 1600 To Existing 1200 AP Network?

Apr 1, 2013

I have a Airnet 1600 Series that I want to add as another repeater to our 1200 series 802.11g network. We already have 2 AP's running fine as Repeater and BR, I just need to a this 1600 AP to the existing wirelss. Everytime I try to change the 1600ap as a repeater, I get the below error.
 
cannot set role in radio network to when another radio is set to one of the above roles

View 1 Replies View Related

DAP-1522 / Adding Wireless Access Point To Wired Network?

Dec 27, 2010

Here's the setup:

DGL-4100 (wired gigabit router)
-> Wii
-> X360
-> PS3
-> DGS-2205 (wired gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522 (wireless access point/bridge)

Now, we're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. I tried entering the SSID manually, and nothing can find it.

View 2 Replies View Related

Netgear WNDR4500 - Adding Wireless Router To Existing Network?

Sep 23, 2012

Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.

The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.

Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.

View 10 Replies View Related

Linksys Wireless Router :: E3000 Adding To Network Without Changing Anything On RouteFinder

Jan 5, 2012

I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users.  The main router is a RouteFinder SOHO VPN (RF560).  The RouteFinder acts as a gateway and provides DHCP.  I do not want to change it's role or settings.  When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet.  As a quick fix as I was working on something else at the time, I just unplugged the E3000.  Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do.  Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all???  By the way...I am located in another state than this router and network.  I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely. 

View 7 Replies View Related

Linksys Wireless Router :: WRT400N - Adding Access Point To Existing Network

Oct 26, 2010

I have an existing wireless network using a Cisco/Linksys WRT400N wireless router (which in turn is connected to a cable internet provider). I need to extend my wireless coverage and so purchased a Cisco/Linksys E1000 to act as an additional access point.  Purchased from BB, the local 'geek squad' rep instructed me to follow the users guide for the set up. After login into the admin service on my E1000, I followed the 'Advanced Routing' instructions and disabled the 'NAT' option and subsequently enabled the 'Dynamic Routing (RIP)' option.  Everything worked like a charm to this point, but now I'm stuck. What steps do I need to follow to allow clients to log onto my wirelss network via the E1000 (secondary access point)? I've established WEP security keys on the WRT400N (primary access point) and want to use the same network security parameters on the E1000.

View 9 Replies View Related

Cisco Wireless :: 4402 - Adding Additional Apps To Working Mesh Network

Nov 19, 2012

We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).

WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :
[URL]
 
Is AIR-CAP1552E-x-K9 with three external dual band antennas enough for 2-GHz b/g/n local access and 5-Ghz back haul?
 
Does 1552 Mesh AP work with 1522 Root AP?

View 1 Replies View Related

Adding A Non-wireless Network Printer Via Wireless?

Apr 5, 2011

My problem is the whole network (router / switches) is located in one end of the office building and the printer is located in the other end. Its a big multi functional printer with copy, scan etc. At the momemt we have a loooong network cable running on the floor from the one end to the printer.

Unfortunately we dont have an easy way to install cables above the rooms and that way connect the printer via cable to the other end of the building so I need some sort of wireless solution.

The range is approx 20 meters.

I was thinking of installing a wireless router in the printer room and then some wireless adaptors in the pc's (they dont have wireless cards at the moment). But can the pc's have trouble-free connection to both lan and w-lan at the same time ?

View 4 Replies View Related

Adding A Second Network?

Sep 28, 2012

I'm a newb at this stuff and hope someone will take pity on me and point me in the right direction?In a nutshell, we run a SBS2008 server at work with 20 users. Our company has a domain name which, via DNS hosting is pointed to our static IP. Email address's are handled via the server using Exchange 2007. Documents and files are stored on a data drive on the server (lets call it Server 1). We have now setup a second business with a different domain. I now have 10 users who will need access to the files on Server 1, but will run under a different domain (and need different email addresses) and need to have access to files stored on Server 1 and the new Server 2. The current setup is simple. ADSL comes into the server room and goes to a modem/wireless. From there it goes to the server which handles the DHCP. The server is in turn connected to a 24 port switch which then feeds the workstationsI have access to purchase another server and whatever hardware is required. No amount of Googling matches my scenario hence my question. What I'm really after is a mudmap showing setup or the right way to set this up

View 8 Replies View Related

Adding PS3 To Network Using A Hub

Dec 22, 2012

If I did use the hub would I get full speed on the PC or PS3 as long as one or the other was switched off or would I always get half speed regardless?

View 5 Replies View Related

Adding PS3 To Network Using A Hub?

Dec 22, 2012

I have recently purchased a PS3 and would like to add it to my network. I currently have router in an upstairs room and it is linked to my PC in the basement using an ethernet cable.My new PS3 will also go in the basement. Question: as there is only the single cable going to the basement could I link the PS3 using a hub? I have a small Netgear hub left over from years ago would this work? If I did use the hub would I get full speed on the PC or PS3 as long as one or the other was switched off or would I always get half speed regardless?

View 2 Replies View Related

Wireless :: How To Connect Samsung Blu-ray Player

Jan 10, 2011

after i enter the security key for my router it says it is unable to connect to the network. it also has me manually put in my ip address and it says my gateway ping is incorrect. where do i find this information

View 1 Replies View Related

Magnavox Blu-ray Player Won't Connect To Wireless

May 4, 2012

My magnavox blu-ray player won't connect to wireless. Here is all the info.

[code]....

View 4 Replies View Related

Adding A Printer To Network Of 3 PCs?

Feb 21, 2011

I would like 3 PC's to share a printer. I have purchased a Samsung 320N for this and also a usb print server. I also have a Belkin router from which the 3 PC's are connected via ethernet for broadband.Can I install the print server software on one machine or does it have to be installed on all the PC's?Am i correct in thinking that the printer will be connected to the print server via an ethernet cable and the print server will be connected to a PC via usb?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved