Adding A Computer To A Wireless Network?
Jul 5, 2011the pc im trying to connect to a wireless network was previously on but when the OS was changed it failed to connect back on the network. what should i do?
View 1 Replies
ADVERTISEMENT
Adding A Computer To A Windows Small Business Server Network?
Apr 14, 2011At my office we have a dell server running windows small business server 2003, there are around 15 computers on our network running mostly windows 7 (a few with XP). I am wondering how difficult it is to add a computer to the network so it can log into our domain and all that.I just had to reformat one of the computers and would normally wait for our network guy to do it remotely but If i could do it myself it would save time (and money). I am already an administrator and basically i just need to make it so the log in prompt when windows starts has our office network listed as the domain instead of jus the local log in. It is a dell running windows 7 64 bit.
View 5 Replies View RelatedAdding Another Computer To Wireless System?
May 29, 2011I'm trying to connect another computer to our household wireless network. I have the security key but I can't get a window to come up asking for it when I click on our family network. How do I get a box to come up asking for the key?
View 3 Replies View RelatedAdding New Computer To Wireless Router Netgear / Invalid Mac Address
Apr 21, 2012I am trying to add a new computer to my wireless statione access list but have not been successful. I got the ip address of the computer i was trying to add, my issue is how to add it to the list. i tried adding the details and filling in the device name and MAC address but kept getting the error message "invalid MAC address.please enter again.
View 1 Replies View RelatedAdding Router Disconnects Computer From Internet?
Aug 30, 2011I recently bought a Motorola SurfBoard SB5101U Cable Modem and a MediaLink Wireless-N Router (Model NO.: MWN-WAPR150N). Just yesterday, Charter Internet hooked up the internet for my apartment. It works just fine when I only have the modem connected, but when I add the router, the internet disconnects.I have tried changing the router's IP.Here's the ipconfig /all for only the modem:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMatthew>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Matthew-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Adding Computer To Server In Work Setting
May 2, 2012I work in a small group with a network server so we can share files and documents from computer to computer. I am trying to access this server on a new computer and am not having any luck finding instructions on how to do so. I don't need to sign in to the network (to gain access to internet browser, etc), I need to be able to add this computer to our server so I can view these folders & files on this new computer.
View 2 Replies View RelatedAdding Another Computer To Existing Router Hookup?
Nov 24, 2012I am trying to hook a second computer up to run off my belkin router?
View 1 Replies View RelatedAdding A Blu-ray Player To The Wireless Network
Jan 4, 2011I own a Panasonic DMP-BD80 Bluray player. It has both an ethernet connection and a USB port. I'd like to add the Bluray player to my wireless network but I don't know what equiptment to buy or how to install it.
View 4 Replies View RelatedAdding New Laptop To Wireless Network?
Jan 11, 2013I'm trying to add a new laptop to our current wireless network. I need the security key and an easy way to locate it.
View 1 Replies View RelatedAdding Printer To Wireless Network?
Mar 3, 2011I am not a tech person, so I apologize if this is a dumb question. Tech supportme because no one wants to comment on if/how to attach equipment manufactured by some other company.I have a wireless home network using a Netgear DGN2280 router/modem. I also have an HP Officejet 5800 printer that I would like to add to the network. This is a USB printer that DOES NOT have a network card of any kind.I have heard of a print server, and know that it obviously has to do with hooking a printer to a network, but don't know if it will work in my application. Will this work for me?I just now noticed that there is a USB port on the back of the router/modem. can I hook my printer up to that port (and leave it hooked up) and print across the wireless network? I don't care if my printer has to be wired to something. I would just prefer that my laptop not have to be wired directly to the printer.
View 5 Replies View RelatedSMC 2804WBRP G - Adding WEP Key To Wireless Network Router?
Jan 10, 2011I have recently reset my SMC 2804WBRP-G Router because I forgot my old WEP Key. Now when I set a new key, my wireless devices will not connect to the router.
It works fine without securing the router with a key, but I don't want my neighbors stealing my Internet bandwidth.
DI-524 - Adding A Wireless Access Point To A Network?
Jan 22, 2013We have a wireless router, (Dlink DI-524, a couple of years old, and all the cables), and I have a basic knowledge of networking, such as DHCP servers and so on, but I don't know how to set it up. We have a working LAN port, so access isn't a problem. And we know the server address. As much as we'd like the IT dept. to do it, or to at least tell us how, they're unbelievably lazy and won't do either.
View 2 Replies View RelatedCisco Wireless :: 1242 - Adding New AP To Network?
Mar 24, 2013When I tried to add new AP 1242 to my network I had following problem:
The Ap was constantly reloading and I was getting message
Wed Mar 20 13:32:12 2013 AP 'UBFT-E06-F0A-R09-0022.901b.a6ba', MAC: 00:23:ab:27:1f:30 disassociated previously due to AP Reset.
%CAPWAP-3-IMAGE_DOWNLOAD_ERR3: capwap_ac_platform.c:782 Refusing image download request from AP - unable to open image file /mnt/ap_bundle/ap.pri//c1240
I decidet to reinstall software on WISM 2 modul (7.2.111.3) this fix the problem and AP joined controller but during this process I have lost connection to 87 AP for 3 seconds and then they joind back again.
"disassociated previously due to AP Reset"
WRT54G2 - Adding Wired Connection To Wireless Network?
Nov 16, 2011I have a Linksys WRT54G2 router upstairs in my house that wirelessly reaches the entire house. I also just bought a Linksys Valet Plus M20 that will be my router once I get it in the mail. The problem is I want to hook up my downstairs Satellite receiver to the internet but it only has a LAN port. I cannot run a LAN cable downstairs. Is there any way to link these routers up wirelessly and then run a LAN cable to my SAT receiver? Or do I need to buy a different product?
View 1 Replies View RelatedSamsung BD-E5500 - Adding Blu-ray Player To Wireless Network
Apr 9, 2012I have practically NO knowledge of networking! So I've been tearing my hair out trying to get this darn thing sorted but to no avail.So, I've bought a Samsung BD-E5500 blu-ray player which has internet capability either through Ethernet or a Samsung wireless adapter. I am not willing to spend an extra £40-£70 on an adapter and obviously don't relish the idea of running a very long cable to my router upstairs. However the general concensus is that it's possible to take a cable out of the Ethernet and into a wireless AP or router, using it as a bridge to the main wireless router. So I have tried this and failed, of course not having a clue as to what I'm really doing. I have a Netgear ME102 access point which the player can't seem to get on the network with at all and also I have tried using a Belkin F5D7632 wireless router. Now, with the Belkin router the player does say that it can access the network, however it says that it cannot access the internet. The wireless router that I have upstairs is an O2 Wireless Box 3.
View 3 Replies View RelatedAdding Additional Items To Existing Wireless Network?
Feb 17, 2011ive got 2 laptops on my wireless network and have just bought a pc. it dosnt seem to be finding my connection so i cannot get it onto my wireless network?
View 1 Replies View RelatedSending Out The Wireless Network From Computer A To Computer B?
Jul 5, 2011how to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View RelatedRouters / Switches :: Adding A Wireless Conection To Existing Network
Dec 22, 2011Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
View 2 Replies View RelatedAdding 2nd Wireless Router To Network In Order To Extend Range?
Mar 25, 2011i have intermittent connectivity on the 2nd router that was installed on the network in order to extend range. 2nd router is connected to the original wireless router by an ethernet cable.
View 5 Replies View RelatedLinksys Wireless Router :: WRT 110 Adding Printer To Home Network
Aug 28, 2011I have a home network with an older desktop, two laptops, couple of PDA and now a cellphone. I'm using using a WRT 110 router I bought new a couple of years ago. It run flawlessly even when I switch from DSL to Comcast Internet.My printer (HP All-in-one) is currently attached to the rear of my desktop and if I want to print anything I have to fire up the desktop. Can I plug the printer in the WRT 110? Be able to print form my laptops?
View 4 Replies View RelatedCisco Wireless :: Adding 1600 To Existing 1200 AP Network?
Apr 1, 2013I have a Airnet 1600 Series that I want to add as another repeater to our 1200 series 802.11g network. We already have 2 AP's running fine as Repeater and BR, I just need to a this 1600 AP to the existing wirelss. Everytime I try to change the 1600ap as a repeater, I get the below error.
cannot set role in radio network to when another radio is set to one of the above roles
DAP-1522 / Adding Wireless Access Point To Wired Network?
Dec 27, 2010Here's the setup:
DGL-4100 (wired gigabit router)
-> Wii
-> X360
-> PS3
-> DGS-2205 (wired gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522 (wireless access point/bridge)
Now, we're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. I tried entering the SSID manually, and nothing can find it.
Netgear WNDR4500 - Adding Wireless Router To Existing Network?
Sep 23, 2012Added a wireless router to our office here so that people with laptops could get on the net without having to physically plug in. Right now it is ok, but the router is acting as it's own DHCP server instead of our server here assigning out the IP's.
The main gripe I have is I can only login to the router through my phone and not through my computer. How can I achieve this. We have multiple offices that all connect through a VPN. I would like our sys admin to access the router at his location as well.
Do I just turn off DHCP on the router and thats it? The model is Netgear WNDR4500.
Linksys Wireless Router :: E3000 Adding To Network Without Changing Anything On RouteFinder
Jan 5, 2012I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users. The main router is a RouteFinder SOHO VPN (RF560). The RouteFinder acts as a gateway and provides DHCP. I do not want to change it's role or settings. When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet. As a quick fix as I was working on something else at the time, I just unplugged the E3000. Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do. Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all??? By the way...I am located in another state than this router and network. I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely.
View 7 Replies View RelatedLinksys Wireless Router :: WRT400N - Adding Access Point To Existing Network
Oct 26, 2010I have an existing wireless network using a Cisco/Linksys WRT400N wireless router (which in turn is connected to a cable internet provider). I need to extend my wireless coverage and so purchased a Cisco/Linksys E1000 to act as an additional access point. Purchased from BB, the local 'geek squad' rep instructed me to follow the users guide for the set up. After login into the admin service on my E1000, I followed the 'Advanced Routing' instructions and disabled the 'NAT' option and subsequently enabled the 'Dynamic Routing (RIP)' option. Everything worked like a charm to this point, but now I'm stuck. What steps do I need to follow to allow clients to log onto my wirelss network via the E1000 (secondary access point)? I've established WEP security keys on the WRT400N (primary access point) and want to use the same network security parameters on the E1000.
View 9 Replies View RelatedCisco Wireless :: 4402 - Adding Additional Apps To Working Mesh Network
Nov 19, 2012We need to add additional APs to working wireless mesh network (WLC 4402, 1520 series AP).
WLC 4402 supports 1550 series access points with firmware upgrade to 7.0.235.0 :
[URL]
Is AIR-CAP1552E-x-K9 with three external dual band antennas enough for 2-GHz b/g/n local access and 5-Ghz back haul?
Does 1552 Mesh AP work with 1522 Root AP?
Adding A Non-wireless Network Printer Via Wireless?
Apr 5, 2011My problem is the whole network (router / switches) is located in one end of the office building and the printer is located in the other end. Its a big multi functional printer with copy, scan etc. At the momemt we have a loooong network cable running on the floor from the one end to the printer.
Unfortunately we dont have an easy way to install cables above the rooms and that way connect the printer via cable to the other end of the building so I need some sort of wireless solution.
The range is approx 20 meters.
I was thinking of installing a wireless router in the printer room and then some wireless adaptors in the pc's (they dont have wireless cards at the moment). But can the pc's have trouble-free connection to both lan and w-lan at the same time ?
Adding A Second Network?
Sep 28, 2012I'm a newb at this stuff and hope someone will take pity on me and point me in the right direction?In a nutshell, we run a SBS2008 server at work with 20 users. Our company has a domain name which, via DNS hosting is pointed to our static IP. Email address's are handled via the server using Exchange 2007. Documents and files are stored on a data drive on the server (lets call it Server 1). We have now setup a second business with a different domain. I now have 10 users who will need access to the files on Server 1, but will run under a different domain (and need different email addresses) and need to have access to files stored on Server 1 and the new Server 2. The current setup is simple. ADSL comes into the server room and goes to a modem/wireless. From there it goes to the server which handles the DHCP. The server is in turn connected to a 24 port switch which then feeds the workstationsI have access to purchase another server and whatever hardware is required. No amount of Googling matches my scenario hence my question. What I'm really after is a mudmap showing setup or the right way to set this up
View 8 Replies View RelatedAdding PS3 To Network Using A Hub
Dec 22, 2012If I did use the hub would I get full speed on the PC or PS3 as long as one or the other was switched off or would I always get half speed regardless?
View 5 Replies View RelatedAdding PS3 To Network Using A Hub?
Dec 22, 2012I have recently purchased a PS3 and would like to add it to my network. I currently have router in an upstairs room and it is linked to my PC in the basement using an ethernet cable.My new PS3 will also go in the basement. Question: as there is only the single cable going to the basement could I link the PS3 using a hub? I have a small Netgear hub left over from years ago would this work? If I did use the hub would I get full speed on the PC or PS3 as long as one or the other was switched off or would I always get half speed regardless?
View 2 Replies View RelatedHome Network :: Add Printers To Local Wireless Network Without Sharing From Computer
Mar 3, 2012I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedAdding A Printer To Network Of 3 PCs?
Feb 21, 2011I would like 3 PC's to share a printer. I have purchased a Samsung 320N for this and also a usb print server. I also have a Belkin router from which the 3 PC's are connected via ethernet for broadband.Can I install the print server software on one machine or does it have to be installed on all the PC's?Am i correct in thinking that the printer will be connected to the print server via an ethernet cable and the print server will be connected to a PC via usb?
View 5 Replies View RelatedAdding A Second Router To Network?
Dec 17, 2011I have a home network that is up and running. It consists of a cable modem, a non-wireless router and two computers.My cable provider provides me with two DHCP IP addresses that are pingable on the Internet.I would like to connect a second router to my network and give it the second DHCP IP address that my Internet providers gives me.
View 9 Replies View Related
