Cisco Wireless :: 4402 WLC - Get Network For Guests Instead Of DMZ

we have a two port 4402 WLC here with only one port currently in use. The topology is bacically the used port uplinks to a dmz switch. Our Intranet and the Internet are accessed via an ASA from the WLC. The WLC also sits in the DMZ. This WLC is only used for guest wireless access. The AP information and traffic is exchagned from a primary WLC on our Intranet and authentication is done via RADIUS.  Internet access is handled through the ASA as well on the DMZ. We have a completely independent ISP broadband connection here that was put in long before I was ever here and is used for guest wired web access. All ports are clearly labelled and have bright pink patch cords. What I would like to do is have our wireless guests be on that network rather than our dmz for their web access. I have pulled an ethernet cable from the switch that connects to that broadband connection to the cabinet with the 4402.  So the physical is fine right now. I'm not all that familiar with the WLC's, so I'm not sure if everything else can remain the same as it is right now, but just connect the second port to the broadband connection and route guest Internet traffic through there rather than the DMZ.