Cisco Wireless :: WLC2106 Not Connecting To Network?
Nov 28, 2007
I am trying to get a controller to work on my network. output from the switch arp table.
Internet 172.28.227.2 0 001b.d5cf.79c0 ARPA Vlan103
Internet 172.28.227.1 - 001c.b1ad.7400 ARPA Vlan103
Internet 172.28.227.12 0 001d.a1cc.b7f8 ARPA Vlan103
controller config:
Interface Name................................... management
MAC Address...................................... 00:07:0e:25:ac:a0
IP Address....................................... 172.28.227.2
IP Netmask....................................... 255.255.255.0
[code]....
The switch see's it but i can not ping or access it via web or telnet.
View 5 Replies
ADVERTISEMENT
Aug 22, 2012
I've just bought an AIR-WLC2106-K9 and 3 x AIR-LAP1142N-E-K9 and I'm having a problem getting the AP's configured.
Firstly, the controller did not discover the device when it was on the same sub net, I had to plug it straight in which is no good for wireless-n due to the 100Mbps port speed on the controller. Secondly, when I am editing the AP through the controller webpage, none of the details are saved after applying changes (static IP etc).
I followed the Cisco quick start guide for the controller to get the basic config, radius server details etc in. It is running software version: 4.2.61.0
View 17 Replies
View Related
Oct 3, 2012
we have the WLC and 2 x Aironet AP's that is powers over PoE. The other day is was reloaded and since then the AP points are Blinking Red, according the the Aironet manaul this means some sort of boot error? They are also not appearing on the WLC from the GUI or CLI running a show ap summary. Interesting though I can see them via CDP, however they are not picking up IP's as they are listed as 0.0.0.0. After checking with colleagues I was told these were set statically.
Is it possible that the points not having IP addresses is a sign of a corrupt boot environent? I would have though they would not have appeared in CDP if they were corrupt?
I did not set this up in the first place so a little puzzled at the moment? Nothing has changed on the config bar using a different NTP server on the network?
View 1 Replies
View Related
Dec 11, 2012
I am about to configure a brand new AIR-WLC2106-K9 V05 and didn't manage to find what is the deafult IP address configured on the device. I need it so I could start Web GUI management session.
View 4 Replies
View Related
Mar 2, 2013
I have a WLC2106 and AP3502i. The issue that I am having is the radio for 5GHz is not showing up in "Wireless > 802.11a/n" (see attached screenshot) I am not exactly sure what was the problem. When I went to 802.11b/g/n I do see an entry for 2.4Ghz radio, but nothing on 5GHz.
I have the AP plugged directly to my 3550POE, and when I used the command "show power inline" it says that the switch is providing 15.4W and there is still 345W remaining on the switch. The LED on the AP is solid green. I issued a no shutdown on dot11radio1 and the status is up/up, but there is still no entry under "Wireless > 802.11a/n"
View 23 Replies
View Related
Feb 15, 2013
I have a WLC 2106 which is configured and working as follows: [code] how do i get the AP at Site B to use the local server (10.0.28.x) to hand out DHCP leases?
View 3 Replies
View Related
Jun 13, 2010
I am getting error messages for clients:
11 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:13:ce:54:57:3c using WPA key on 802.11b/g interface of AP 00:16:9c:91:97:c0 12 Mon Jun 14 09:11:56 2010 Decrypt errors occurred for client 00:16:6f:91:d8:60 using WPA2 key on 802.11b/g interface of AP 00:16:9c:91:97:c0
These are only occuring for clients that are disconnecting....
They can reconnect after a WLC reboot....
We have swapped APs.....
I have seen this error in other forums but it says not to worry about it. There has to be a connection between this and clients getting disconnected. We have anywhere between 10-50 clients on the system at any one time.Is this a client issue (nic firmware, version) or is this an error in the controller??
AIR-WLC2106-K9
IOS ver: 6.0.196.0
View 4 Replies
View Related
Feb 18, 2013
I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia),>config 802.11a enable network802.11a network not supported for this Country CodeYet, on a AIR-CT2504-K9, set to same country code there is no problem. Is this a WLC model or version issue? WLC2106 is on version 6.0.199.4 while the CT2504 is 7.0.220.0
View 3 Replies
View Related
Apr 26, 2013
I am in the process of building a small educational lab. I just want to make sure that I am not going to have any AP registration/join issues due to regulatory compatibility with a AIR-WLC2106-K9 controller and a AIR-LAT1142N-N-K9 access point. Will this work and if so, will I then be in the clear as far as having devices like my computer and phone attach to the SSID?
View 5 Replies
View Related
Mar 13, 2012
I bought 6 air-lap1042n-a-k9 for our business. They are mounted. I bought a Cisco POE switch for them. I hooked them up and realized they needed a Wireless LAN Controller. I have never dealt with these before. From my research, I need to buy AIR-WLC2106-K9.Can I just connect my POE switch to the LAN Controller to configure all 6 access points that are connected to the POE switch?
View 6 Replies
View Related
Feb 17, 2011
I have been trying to get Airprint to work in our network. Topology is a 255.255.255.254.x network that has mostly wired with wireless all under the same subnet. Airprint will not discover printers if on the WLC2106 WiFi network but if the iPad or iPhone is connected to some small Linksys WiFi router, it works.
What should be enabled or disabled on the WLC2106 to get Airprint to work?
View 28 Replies
View Related
Sep 14, 2011
So I just got a wireless presentation gateway wpg 120 to connect to projector wirelessly. For me to connect to the projector i need to set wireless network to its wireless connection. But if I connect to wpg 120's connection, there is no internet access.Is there any way I can connect to two wireless network or use wpg 120 to connect to internet using it's connection.
View 3 Replies
View Related
Feb 13, 2013
I just picked up a WET200... connect it wirelessly to a Verizon Mifi so wired devices can get access to the Internet.
I've had zero luck connecting the WET200 to a wireless network...I've tried two different ones and I've also tried changing from WPA to WPA2.
View 1 Replies
View Related
Mar 25, 2013
I have successfully setup the Cisco 2504 (AIR-CT2504-K9).
Trying to add 2 Access Points (AIR-SAP1602I-A-K9). I created static IPs for both in the router (RV180). The Access Points are connected to the PoE ports on the Cisco Switch (SG200-08P). The 2504 is connect to one of the non-PoE ports on the SG200. The SG200 is then connected to another switch (SF302-8P), which is connected to the Router (RV180), which is connected to the cable modem (Cisco DCM3000).
I am able to ping both of the access points from within the LAN, but they do not show-up on the 2504 console.
View 3 Replies
View Related
Feb 5, 2011
I have a medical office and am trying to connect my netbook to the office networkThe netbook can connect to the internet via wireless. I want the netbook to connect to the network drive that has my office data and program. How can I get the netbook to see the network drive on the server
View 2 Replies
View Related
Feb 27, 2011
I have a PC network in house using a netgear router. One of the PC is cable-connected to the router and the other using wireless network adapter. Now I have a Sony Blueray player which support network connection. How do I connect it to the network?
View 1 Replies
View Related
Sep 10, 2011
My problem is my laptop is not connecting to the only network in my home and I can connect to all other wireless networks around.Also there is no problem with the router/modem coz all my room mates can connect and access internet wireless and also through Ethernet.Even I'm able to connect to the home network using Ethernet but not wireless. Strange but true!
[code]...
View 1 Replies
View Related
Aug 13, 2011
connect my partner's laptop to my wireless network?
The router is a Sagem provided by my ISP (Sky). The wireless connection works fine on my MacBook, and various other devices connect no problem with the security key.
However, his laptop (Windows Vista) will not connect wirelessly. After entering the password, it says it can't connect because it 'times out' (we are obviously entering the password immediately with no delay). It connects fine with an ethernet cable. It will also connect to an unsecured wireless network we can pick up.
The security setup is WPA-PSK with TKIP encryption, and we've made sure he is using these settings.
If it might be important, he has just moved here, and previously his laptop was connected to another Sky router with no problems.
View 2 Replies
View Related
Apr 6, 2011
trying to get an IP address from a public wireless network. I am trying to connect to the wireless network here and I get good signal, but it says, that my access has "Limited Connectivity". I then tried to see why my laptop could not access the system and ran "ipconfig/all" in the command prompt. I pasted the results below. I don't know a ton about computers and why my computer will not get a correct IP address (it sends back that the IP address is 169.254.44.160 as opposed to a 10.xxx.xxx.x that the network should be passing out).
Pasted text from ipconfig/all script
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Usersxxxxx>ipconfig/all
[code]...
View 3 Replies
View Related
Aug 13, 2012
I tried to set up an ad hoc access point on my laptop, but it won't connect to the network I made. I'm using xp sp3.
View 2 Replies
View Related
Apr 17, 2011
I recently set up a VPN on my home computer. I am wondering if it is possible for me to connect to the internet via the VPN without also being connected to the internet via my home wireless network? Right now, whenever I disconnect from my home wireless network, my connection to the VPN will also cut off. This is a problem because should my connection via the VPN ever be interrupted, my home wireless connection would then "take over" the connection, and the eb sites I'm visiting would then be able to see my real IP address, which makes having a VPN pointless. I'd like to have it so that if my VPN connection is interrupted, I will simply not have internet until the VPN connection comes back.
I am running Windows 7.
View 8 Replies
View Related
Jul 26, 2012
I'm trying to connect my XP laptop to a home wireless network and I keep getting the following error once I enter in the passcode provided by my ISP:The network passcode needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hexadecimal characters.I have an iphone, 3 ipads, one windows 7 pc and a mac connected to the network with no problems. The password provided by the ISP is 25 characters (letters and numbers). I would hate to have to change the password on all my devices for one Windows XP laptop. I've called Netgear who make the wireless router and they said the only solution was to change the password for all devices.
View 2 Replies
View Related
Nov 28, 2011
i have a laptop running Vista which will connect to wireless network, but will not connect to internet. I have tried connecting direct to router and also deleting wireless connection & reinstalling with no luck. I can however use a mobile broadband usb dongle and connect to the internet with no problem - appears to be a problem with connecting via something other than mobile broadband?
View 1 Replies
View Related
Mar 11, 2011
I have a wireless network at home but my laptop does not connect to it. The network works as my iPhone connects to it az well as my PS3. The laptop finds the network and has full bars for connectivity but it is only on a local network. I don't have a P.C in the home, the only time I can go online is when the laptop is plugged in. My laptop operates with vista.
View 11 Replies
View Related
May 2, 2012
I am on the Verizon wireless router connected to my laptop and the xbox wired to laptop. I have another wireless router that i want to connect because the main router is in the basement I am on the second floor. How do I connect the xbox to the 2nd router wired?
View 1 Replies
View Related
Dec 26, 2012
Basically, my laptop won't connect to my wireless network, it just stopped connecting yesterday for no apparent reason, the wifi works with my phones and other laptop but not my laptop. I restarted my router, laptop did a system restore and factory restore but no luck. here are specs from ipcongif
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersdonnie>ipconfig/all
Windows IP Configuration[code].....
View 5 Replies
View Related
Jan 18, 2013
We have printers connected to the network, but I need a standalone printer connected to my workstation due to the confidential nature of some of my printing.I chose a small wireless printer as I already am being strangled with wires and cables.I went thru the wireless installation, and was told to connect PC to printer via USB.I finally got a connection, but not the one I wanted. We also have a wireless router, but connecting to itI got message saying "a connection was made but your PC is not connected to your printer".
View 5 Replies
View Related
Jan 3, 2013
we have a linksys e4200 wireless router we don't have people connecting to it often but people do occasionally. Everyone can connect to the network drives fine (as far as I'm aware) except for one laptop. It's a windows 7 Ultimate 64 bit . It has no problem connecting to the internet just a problem connecting to the drives.
View 2 Replies
View Related
Dec 31, 2012
How to connect a windows CE notepad on a wireless broadband?
View 1 Replies
View Related
Feb 12, 2013
I've got a wireless TP-LINK router with an ADSL connection.It got 1 ADSL port and 4 LAN ports. I will be temporarily moving to another house for a couple of months.The internet connection type in that house is LAN.I'm not so sure that this the right term but it's not ADSL or dial up,it's just a cable connected to the PC from the rooftop which got a small device that's connected to the provider's office .I need wifi for my galaxy s3.
1-Is it actually possible to connect a LAN connection to a router and use wifi ? If so,are there any installion steps other than just connecting the cable to the router?
2-Will this affect my adsl connection when I go back to the house with the adsl connection ?
View 3 Replies
View Related
Feb 23, 2013
I'm trying to add another wireless router to my network. It's a home network using a Charter cable modem/wireless router in the main house. To connect a second building to the router I have used a CAT-6 cable to connect to the modem/router combo, I need to do this because the second building has a metal roof and doesn't allow wireless connection to the cable modem. I want to be able to use wireless in the second building.
My question is, the CAT-6 cable coming into the second building from the cable modem/router is coming from a LAN port. Would I connect that cable into the WAN port of the second wireless router or into a LAN port?
Cable modem LAN ---->second building----> Second Wireless router
View 1 Replies
View Related
Aug 8, 2012
I have an Aironet 1140 AP that will not connect to the network when on PoE (either using a Cisco PoE injector) or a Avocent Switch that provides PoE.
The AP will boot up and and devices will connect to it (the LED changes to blue) but none of the devices can get access to the corporate network or internet. When the AP is powered by the standard power supply, it operates normally, i.e. devices can access the network. Are there settings that can be changed to get the AP to work correctly on PoE?
View 4 Replies
View Related
Aug 6, 2012
question in regards to the deployment of a new WLC and new LAPs,I have configured and connected a 5508 WLC and 3500 series LAP.LAG is enabled in the WLC and successfully connected to the neighboring switch (using etherchannel) and to the network.
The port-channel port is set to trunk mode obviously and certain vlan ids are currently allowed (3-5)
The management interface has this IP address 192.168.5.250/24
I created a WLAN with WLAN ID 3, Interface set to Management and say SSID test1
I have connected a new LAP to the network, which switchport interface is set to access mode and assigned with vlan id 3. The LAP is able to join the WLC successfully with an IP address, such as, 192.168.3.100 (assigned via DHCP).
When I try connecting a mobile client to the wireless LAN, it can successfully detect and connect to the WLAN, created in the WLC (test1) however it gets an IP address by DHCP, in the 192.168.5.0/24 network, which is the IP range of the management interface's IP address.
What can I do to get the clients connecting on network 192.168.3.0/24? I thought this would be the case since I allocated the WLAN Id of 3 in the WLAN test1 configuration and since the LAP switchport is set to access mode with vlan ID 3.
View 3 Replies
View Related
