Cisco :: Upgrade From 7.0.235 To 7.0.240 5508 WLC?

Jun 4, 2013

upgrade from 7.0.235 to 7.0.240? I can't go any higher right because we are still using WCS. I read the white papers but as far as I can tell there are no new features..

View 3 Replies


ADVERTISEMENT

Cisco :: 5508 Upgrade From 7.0.240 To 7.3 Or 7.4

Mar 26, 2013

I have a main with one WLC 7.0.240.0 and have acquired a HA with 7.3. I have considered whether to put on both WLC version 7.3 or 7.4.:
 
first, that there are differences between the two versions?
 
second: As I read, the version 7.4 can make backup of several WLC, this function is already available?

View 7 Replies View Related

Cisco :: 5508 - Need To Upgrade APs At Same Time?

Feb 14, 2012

Looking to upgrade our 5508 WLC to the newest code AIR-CT5500-K9-7-2-103-0-FUS..We are currently running an older code  6.0.196.0..Are there any issues that I need to worry about with this upgrade ?Do I need to upgrade the AP's at the same time ?

View 7 Replies View Related

Cisco Wireless :: 5508 / Upgrade WLC From 7.2.103.0 To 7.2.110.0?

Apr 25, 2013

I am planning to upgrade WLC from 7.2.103.0 to 7.2.110.0 due to some bug, but I wanted to know if it is compatible with WCS - 7.0.240.0 and NAC Guest server version 2.1.0, I am made some search but I couldn't get to proper conclusion.

View 8 Replies View Related

Cisco Wireless :: Upgrade WLC 5508 To 7.3x Or 7.4x?

Mar 25, 2013

In order to enbale HA SSO on our two 5008 WLC's, I plan to upgrade them to 7.3 / 7.4 (currently 7.2)Right now 7.3.112.0 is the latest release. We do not have any 1600 series AP's, which requires 7.4.any reason going for 7.4 directly..or not going for it?

View 5 Replies View Related

Cisco Wireless :: 5508 WLC Upgrade From 7.0.116 To 7.2.111.3

Dec 3, 2012

I am planing to upgrade 2 of my 5508 series WLC from 7.0.116 to version 7.2.111.3.  I understand that legacy AP's are no longer supported.  Is the upgrade straight-forward just like other code upgrades? 

View 19 Replies View Related

Cisco Wireless :: 4400 / 5508 - Upgrade From 7.0.116.0 To 7.2.103.0?

Apr 2, 2012

I want to upgrade all my controllers (a mix of 4400 and 5508) to 7.2.103.0 from 7.0.116.0. Can I make that jump or should I do incremental?

View 7 Replies View Related

Cisco Wireless :: Upgrade 5508 Controller From 7.0.98.0 To 7.0.220.0

Jan 29, 2012

We are looking to upgrade our 5508 wireless controller from 7.0.98.0 to 7.0.220.0. Reason being, we have experienced a lot of access points disassociating from the controller as well as client authentication issues. Upgraded from 7.0.98.0 to 7.0.220.0 and any issues during the upgrade or after the upgrade?

View 3 Replies View Related

Cisco Wireless :: 5508 - Upgrade Path For WLC?

Jun 11, 2013

We are planning to upgrade our controller 5508 from 7.0.116.0 to 7.1.91.0. Is this directly possible or i have to put some other image before directly upgrading it?

View 7 Replies View Related

Cisco Wireless :: WLC 5508 - Upgrade FUS To 7.0.0 Remotely?

Sep 13, 2012

We recently received a couple of new 5508 WLC running 7.2.103 but the FUS is running 6.0.182. Is it possible to upgrade the FUS to 7.0.0 remotely? Looking at the FUS release notes, user intervention is no longer required, Is this possible?

View 10 Replies View Related

Cisco Wireless :: 5508 With 50 AP License Upgrade From 7.0.220 To 7.4

Mar 13, 2013

5508 W LAN controller with 50 AP License upgrade from 7.0.220 to 7.4 is it will effect to the license and configuration? Because the license came pre- installed. 

View 1 Replies View Related

Cisco :: 5508 - Upgrade WLC Wireless LAN Controller Version 6 To 7

Feb 28, 2013

I want to upgrade a 5508 WLC from version 6.0.196.0 to the most recent 7.4or 7.3  is it ok to skip so many versions, will this cause an issue?

View 9 Replies View Related

Cisco Wireless :: 5508 WLC Code Upgrade / WCS AP 3600?

May 8, 2012

i'm going to upgrade a 5508 wlc code from 7.0.116.0 to 7.1.91.0 to add 3600 series access points having it all manageable via WCS ver 7.0.230.0 it seems to be possible, as it is explained in the compatibility matrix found on [URL]now I have to download the file to the controller...
 
AIR-CT5500-K9-SPECIAL-7-1-91-0.aes
(direct update possible)
  
before doing that I'd like to know if I will loose my configuration on the controller i'm concerned about that because the release document is not clear:
 
- We highly recommend that you back up your controller's configuration files prior to upgrading the controller software. Otherwise, you must manually reconfigure the controller.

- For busy networks, controllers on high utilization, or small controller platforms it is advisable to disable the 802.11a/b/g networks as a precautionary measure.
 
- Step 5 Disable any WLANs on the controller.
- Step 19 Re-enable the WLANs......
- Step 22 If desired, reload your latest configuration file to the controller. (reload config after reenabling wlans?another controller  another question .....: a cisco wlc 2100
 
found 2 update files
 
AIR-WLC2100-K9-7-0-230-0-ER.aes
AIR-WLC2100-K9-7-0-230-0.aes
 
why 2 update files this time? what file to update first?

View 9 Replies View Related

Cisco Wireless :: Using LWAP With A 5508 Controller After AP Upgrade?

Aug 18, 2011

I have an AIR-AP1242AG-E-K9 which had c1240-k9w8-mx.124-21a.JA loaded, I followed the link below and upgraded with Cisco’s upgrade tool to c1240-rcvk9w8-mx with no problems at all, after the upgrade I could then see the LWAP on the 4402 controller and had it working a treat.Now the problems begin, I brought it into the office where we have 5508 controllers, plug in the LWAP into our management switch and boot it up I get an IP assigned from the DHCP server and the AP goes into discovery mode but never finds the controller.I have logged the boot process but this does not give much away, our other 1100 series AP’s boot fine,

[URL]
 
Console Boot Log.
Xmodem file system is available.
 flashfs[0]: 9 files, 3 directories
 flashfs[0]: 0 orphaned files, 0 orphaned directories
 flashfs[0]: Total bytes: 15998976

[code]....
 
And that is where she sits and does nothing more, I have noticed the DNS problems but the other 1100 series LWAP’s boot up after show that same issue.

View 2 Replies View Related

Cisco :: 5508 - WLAN Disable On Controller Upgrade?

Feb 6, 2012

I'm about to upgrade a 5508 controller so I can do the pre-download to the access points, but in every doc I find, it says to disable the WLAN's before upgrading.  This makes no sense.  I'm just moving code over, why do I have to disrupt my wireless network in order to move code?

View 7 Replies View Related

Cisco Wireless :: Unable To Upgrade With 5508 Controller

Apr 5, 2013

I have a 5508 wireless controller running version 6.0.199.4 (the image installed when the device was shipped) and I am trying to install by tftp version 7.3.112.0
 
The issue is when using tftpd32 gets to 82% transfered then fails with the error "% Error: Code file transfer failed - Error while writing output file"

View 7 Replies View Related

Cisco Wireless :: Some C1242 Radios Are Disabled After WLC 5508 Upgrade To 7.3.101.0?

May 2, 2013

One week ago I use a WLC 5508 to place and replace another WLC 5508 with version 6.0.199.4, when I conect the new WLC all AP´s works OK only 10 dont work and not are recognizes from the WLC with version 7.3.101.0. The fail is the radios stay disabled. All ap´s are AIR-AP1242G-AK9 . See the image below, the only difference this ten AP´s are conected in switches cisco all the rest are connected in switches of ohter vendor.   If possible some command in the configuration is not neccesary and make the bad function?This is tipically config apllied by the customer in they cisco switches interface   GigabitEthernet0/22description PB-RS-A22switchport access vlan 5switchport mode accessswitchport port-securityswitchport port-security aging time 2switchport port-security violation restrictswitchport port-security aging type   inactivitymacro description cisco-desktopspanning-tree portfastspanning-tree bpduguard enable?

View 4 Replies View Related

Cisco Wireless :: 5508 - Mobility Ping And SSH Errors After Upgrade To 7.2.110.0

Aug 7, 2012

After upgrading my 5508s to 7.2.110.0, they are reporting mobility data path errors to one of my WiSMs running 7.0.235.0.
 
I get these messages on the 5508s reporting that it can't send a ping to the affected WiSM:
 
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PKT_RECV_ERROR: ethoip.c:341 ethoipSocketTask: ethoipRecvPkt returned error
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PING_RESPONSE_TX_FAILED: ethoip_ping.c:312 Failed to tx a ping response to <ip address>, rc=5
 
But maybe there is another clue because I also see in the same log these errors referencing the same WiSM:
 
*bcastReceiveTask: Aug 08 21:15:45.310: %LOG-1-Q_IND: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
*mmSSHPeerRegister: Aug 08 21:15:44.829: %MM-1-SSHRULE_CREATE_FAILED: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
 
Why is the controller trying to SSH to another controller?  Was some SSH related feature added to 7.2 that has been accidentally enabled? 

View 4 Replies View Related

Cisco Wireless :: 5508 - Lightweight APs Not Receiving IP Address Following Controller Upgrade?

Apr 3, 2013

I have a 5508 controller, just upgraded from 6.0.182 to 7.0.98.0. Also LAG was switched off directly after upgrade.
 
Since the upgrade none of the 1142 LAPs are associating with the controller. I can see they are being issued IPs by the internal DHCP but putting a console cable and watching I am getting:
 
Not in Bound state.
*May  4 11:41:17.759: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*May  4 11:41:17.759: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.             
 
One Ap prior to the upgrade was on a static IP and that connected through without any problem, (it was an 1131 though, but I dont think that is the issue...)

View 7 Replies View Related

Cisco Wireless :: 1232 AG Autonomous To LWAP Upgrade / Supported With 5508

Jul 10, 2012

We have few sites with old 1232 ag AUTONOMOUS existing AP's , They are  connected through 1 mbps link to main office .Now we are planing to upgrade with WLC 5508 and few 1140 ap . but we want to use these same 1232ag ap on some sites.So we need to upgrade it to LWAP .
 
1>Is it possible to upgrade this model of AP
2>Which is the ios i should download , is it avaliable in cisco site (as this ap is end of sale now )
3>How the step to upgrade this autonomous ap

View 3 Replies View Related

Cisco Wireless :: 5508 Controllers - After 7.0.116.0 Upgrade Intel Wi-Fi Link Cards Fail

Nov 10, 2011

Just recently upgrade our 2 5508 controllers from 6.0.199.0 to 7.0.116.0.  Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points.  The thing these laptops all have in common is some variation of the Intel Wifi Link AGN cards.  I have about 200 other clients out there working just fine.
 
I've tried everything under the sun that I can think of.  Patches, drivers, the whole sh'bang. 
 
Is there a known issue with 7.0.116.0 and these particular cards?

View 17 Replies View Related

Cisco Wireless :: 1242 - Cannot Upgrade AP To LWAP Using Upgrade Tool On Windows 7

Sep 29, 2011

I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP.  However, I go to a coworker's XP machine and run the tool without issues.  On Windows 7 I keep receiving the error message of ACL or Firewall is blocking.  I have added rules and then even tried disabling the firewalls completely on both computers and still no success. 

View 7 Replies View Related

Cisco Wireless :: 5500 AP Upgrade Lic Upgrade On Controller

Jun 19, 2012

I am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:

% Error: License file transfer failed - Error from server: File not found
 
I have confusion here that when I configure this command from GUI

tftp://172.32.45.22/cmm/standard.lic
 
What i should use for /cmm/  ????
 
Let say i have lic. file is on desktop of tftp server computer and I say in this command
 
tftp://10.12.70.35/??/license file .lic

View 6 Replies View Related

AAA/Identity/Nac :: CSACS-1121-UP-K9 - Possible To Upgrade It Being Non Upgrade Part

Sep 10, 2012

Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.

View 1 Replies View Related

Cisco :: Generating CSR For WLC 5508?

Apr 29, 2010

Does Cisco WLC 5508 runnig code 6.0.196.0 allows you to generate CSR? Or do you have to use OPENSSL like in previous versions?

View 16 Replies View Related

Cisco :: No SSH With 5508 Version 7.0.103?

May 1, 2012

I am trying to SSH into my controller after upgrading to 7.0.103 and I get the username prompt but it seems to be disconnecting as soon as I do. Is there something different about this version of code as opposed to the older ones?

View 1 Replies View Related

Cisco :: VPN-PassThrough With Wlc 5508 7.0.235.0

Nov 20, 2012

i have 2 ssid with the same comfiguration (diff only in name) in one ipsec ssid vpn (l2tp over ipsec with natt ) works fine, in another after phase 2 is completed no traffic is forwarded and vpn session is dropped. There are no access lists on equipment.
 
I found in documentation that need to activate L3 security and set it to vpn pass-through, but in drop-down menu only one item "none". What is the reason to drop ipsec traffic  ?

View 4 Replies View Related

Cisco :: NCS Not Re-discovering WLC 5508-50

Oct 30, 2012

NCS 1.1.1.24 (PRIME-NCS-VAPL)
5508-50 WLC 7.0.235.3
 
I had to re-IP this WLC onto another management vlan.  Prior to the IP change and code upgrade I removed the WLC from NCS.When attempting to re-add the WLC to NCS, I finally found the it in Configure>Unknown Devices.  Now NCS is showing the Device Type as Unknown, and Inventory Status Detail as Unsupported device, and reachable.

View 3 Replies View Related

Cisco :: ACS 3.3 And WLC 5508 Compatible?

Aug 21, 2011

I have a customer with an ACS for Windows version 3.3. I know the ACS is End-of-support, but if I could do Authentication for a WLAN with a Controller 5508 Softwareversion 7.0.116.0 and how?

View 3 Replies View Related

Cisco :: 5508 - WLAN With 802.1x

Sep 25, 2012

Since the SW upgrade to version 7.3.101.0 (wlc 5508) i have the following issue. We have a W LAN with 802.1x (WPA2/AES) secured. Before the update the users need to enter user/ PW every time when they reconnect (W LAN switch off/ on again) to the W LAN. Now the users don`t need to enter user/ PW when they reconnect to the WLAN.
 
I could not find any setting on wlc to clear this issue.

View 9 Replies View Related

Cisco 5508 WLC - Configuring DNS

Aug 22, 2011

Does anyone know if it is possible to use an 5508 WLC running version  7.0.116.0 as a DNS box? Was not able to find anything in the config  guide.

View 2 Replies View Related

Cisco :: 5508 - NPS Radius

Apr 10, 2013

Cisco WLC 5508
Software Version: 7.4.100.0
Windows Server 2008R2
  
I've got everything setup on the Windows Server 2008 side of things (certificates, radius clients, etc). I added the radius server on the WLC, and configured a new W LAN to use it. Both are on the same sub net. When trying to connect to the W LAN it kept failing.  I installed wire shark on the server to monitor the radius traffic, and to my surprise there was no radius traffic showing up on the server.  The radius statistics on the WLC are at 0 as well, so it's like the WLC isn't even attempting Radius.
 
I re verified that the server was enabled on both the security tab and the W LAN itself on the WLC.  Rebooted the controller and the server, all to no avail.  I used a radius test client, and can successfully send radius commands to the server using that utility. Frustrated, I just kept trying to reconnect on my wireless device, and after about the 15th try, finally I saw radius activity on wire shark.  It rejected my access, but at least I saw activity.  It also registered radius statistics on the WLC as well.
 
So now if I keep trying to connect repeatedly, about every dozen or so times the WLC actually will send a radius request to the server.

View 8 Replies View Related

Cisco :: 5508 - WCS 7.4 Netflow

Jan 8, 2013

configured the monitor and exporter on the wcs 5508 running 7.4.100.0 and it is not working. 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved