In order to enbale HA SSO on our two 5008 WLC's, I plan to upgrade them to 7.3 / 7.4 (currently 7.2)Right now 7.3.112.0 is the latest release. We do not have any 1600 series AP's, which requires 7.4.any reason going for 7.4 directly..or not going for it?
View 5 Replies
I am planning to upgrade WLC from 7.2.103.0 to 7.2.110.0 due to some bug, but I wanted to know if it is compatible with WCS - 7.0.240.0 and NAC Guest server version 2.1.0, I am made some search but I couldn't get to proper conclusion.
View 8 Replies View RelatedI am planing to upgrade 2 of my 5508 series WLC from 7.0.116 to version 7.2.111.3. I understand that legacy AP's are no longer supported. Is the upgrade straight-forward just like other code upgrades?
View 19 Replies View RelatedI want to upgrade all my controllers (a mix of 4400 and 5508) to 7.2.103.0 from 7.0.116.0. Can I make that jump or should I do incremental?
View 7 Replies View RelatedWe are looking to upgrade our 5508 wireless controller from 7.0.98.0 to 7.0.220.0. Reason being, we have experienced a lot of access points disassociating from the controller as well as client authentication issues. Upgraded from 7.0.98.0 to 7.0.220.0 and any issues during the upgrade or after the upgrade?
View 3 Replies View RelatedWe are planning to upgrade our controller 5508 from 7.0.116.0 to 7.1.91.0. Is this directly possible or i have to put some other image before directly upgrading it?
View 7 Replies View RelatedWe recently received a couple of new 5508 WLC running 7.2.103 but the FUS is running 6.0.182. Is it possible to upgrade the FUS to 7.0.0 remotely? Looking at the FUS release notes, user intervention is no longer required, Is this possible?
View 10 Replies View Related5508 W LAN controller with 50 AP License upgrade from 7.0.220 to 7.4 is it will effect to the license and configuration? Because the license came pre- installed.
View 1 Replies View RelatedI want to upgrade a 5508 WLC from version 6.0.196.0 to the most recent 7.4or 7.3 is it ok to skip so many versions, will this cause an issue?
View 9 Replies View Relatedi'm going to upgrade a 5508 wlc code from 7.0.116.0 to 7.1.91.0 to add 3600 series access points having it all manageable via WCS ver 7.0.230.0 it seems to be possible, as it is explained in the compatibility matrix found on [URL]now I have to download the file to the controller...
AIR-CT5500-K9-SPECIAL-7-1-91-0.aes
(direct update possible)
before doing that I'd like to know if I will loose my configuration on the controller i'm concerned about that because the release document is not clear:
- We highly recommend that you back up your controller's configuration files prior to upgrading the controller software. Otherwise, you must manually reconfigure the controller.
- For busy networks, controllers on high utilization, or small controller platforms it is advisable to disable the 802.11a/b/g networks as a precautionary measure.
- Step 5 Disable any WLANs on the controller.
- Step 19 Re-enable the WLANs......
- Step 22 If desired, reload your latest configuration file to the controller. (reload config after reenabling wlans?another controller another question .....: a cisco wlc 2100
found 2 update files
AIR-WLC2100-K9-7-0-230-0-ER.aes
AIR-WLC2100-K9-7-0-230-0.aes
why 2 update files this time? what file to update first?
I have an AIR-AP1242AG-E-K9 which had c1240-k9w8-mx.124-21a.JA loaded, I followed the link below and upgraded with Cisco’s upgrade tool to c1240-rcvk9w8-mx with no problems at all, after the upgrade I could then see the LWAP on the 4402 controller and had it working a treat.Now the problems begin, I brought it into the office where we have 5508 controllers, plug in the LWAP into our management switch and boot it up I get an IP assigned from the DHCP server and the AP goes into discovery mode but never finds the controller.I have logged the boot process but this does not give much away, our other 1100 series AP’s boot fine,
[URL]
Console Boot Log.
Xmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
[code]....
And that is where she sits and does nothing more, I have noticed the DNS problems but the other 1100 series LWAP’s boot up after show that same issue.
I have a 5508 wireless controller running version 6.0.199.4 (the image installed when the device was shipped) and I am trying to install by tftp version 7.3.112.0
The issue is when using tftpd32 gets to 82% transfered then fails with the error "% Error: Code file transfer failed - Error while writing output file"
One week ago I use a WLC 5508 to place and replace another WLC 5508 with version 6.0.199.4, when I conect the new WLC all AP´s works OK only 10 dont work and not are recognizes from the WLC with version 7.3.101.0. The fail is the radios stay disabled. All ap´s are AIR-AP1242G-AK9 . See the image below, the only difference this ten AP´s are conected in switches cisco all the rest are connected in switches of ohter vendor. If possible some command in the configuration is not neccesary and make the bad function?This is tipically config apllied by the customer in they cisco switches interface GigabitEthernet0/22description PB-RS-A22switchport access vlan 5switchport mode accessswitchport port-securityswitchport port-security aging time 2switchport port-security violation restrictswitchport port-security aging type inactivitymacro description cisco-desktopspanning-tree portfastspanning-tree bpduguard enable?
View 4 Replies View RelatedAfter upgrading my 5508s to 7.2.110.0, they are reporting mobility data path errors to one of my WiSMs running 7.0.235.0.
I get these messages on the 5508s reporting that it can't send a ping to the affected WiSM:
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PKT_RECV_ERROR: ethoip.c:341 ethoipSocketTask: ethoipRecvPkt returned error
*ethoipSocketTask: Aug 08 21:15:41.175: %ETHOIP-3-PING_RESPONSE_TX_FAILED: ethoip_ping.c:312 Failed to tx a ping response to <ip address>, rc=5
But maybe there is another clue because I also see in the same log these errors referencing the same WiSM:
*bcastReceiveTask: Aug 08 21:15:45.310: %LOG-1-Q_IND: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
*mmSSHPeerRegister: Aug 08 21:15:44.829: %MM-1-SSHRULE_CREATE_FAILED: mm_dir.c:1969 Failed to recreate the SSH Rule for <ip address>.
Why is the controller trying to SSH to another controller? Was some SSH related feature added to 7.2 that has been accidentally enabled?
I have a 5508 controller, just upgraded from 6.0.182 to 7.0.98.0. Also LAG was switched off directly after upgrade.
Since the upgrade none of the 1142 LAPs are associating with the controller. I can see they are being issued IPs by the internal DHCP but putting a console cable and watching I am getting:
Not in Bound state.
*May 4 11:41:17.759: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*May 4 11:41:17.759: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
One Ap prior to the upgrade was on a static IP and that connected through without any problem, (it was an 1131 though, but I dont think that is the issue...)
We have few sites with old 1232 ag AUTONOMOUS existing AP's , They are connected through 1 mbps link to main office .Now we are planing to upgrade with WLC 5508 and few 1140 ap . but we want to use these same 1232ag ap on some sites.So we need to upgrade it to LWAP .
1>Is it possible to upgrade this model of AP
2>Which is the ios i should download , is it avaliable in cisco site (as this ap is end of sale now )
3>How the step to upgrade this autonomous ap
Just recently upgrade our 2 5508 controllers from 6.0.199.0 to 7.0.116.0. Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points. The thing these laptops all have in common is some variation of the Intel Wifi Link AGN cards. I have about 200 other clients out there working just fine.
I've tried everything under the sun that I can think of. Patches, drivers, the whole sh'bang.
Is there a known issue with 7.0.116.0 and these particular cards?
upgrade from 7.0.235 to 7.0.240? I can't go any higher right because we are still using WCS. I read the white papers but as far as I can tell there are no new features..
View 3 Replies View RelatedI have a main with one WLC 7.0.240.0 and have acquired a HA with 7.3. I have considered whether to put on both WLC version 7.3 or 7.4.:
first, that there are differences between the two versions?
second: As I read, the version 7.4 can make backup of several WLC, this function is already available?
Looking to upgrade our 5508 WLC to the newest code AIR-CT5500-K9-7-2-103-0-FUS..We are currently running an older code 6.0.196.0..Are there any issues that I need to worry about with this upgrade ?Do I need to upgrade the AP's at the same time ?
View 7 Replies View RelatedI'm about to upgrade a 5508 controller so I can do the pre-download to the access points, but in every doc I find, it says to disable the WLAN's before upgrading. This makes no sense. I'm just moving code over, why do I have to disrupt my wireless network in order to move code?
View 7 Replies View RelatedI have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP. However, I go to a coworker's XP machine and run the tool without issues. On Windows 7 I keep receiving the error message of ACL or Firewall is blocking. I have added rules and then even tried disabling the firewalls completely on both computers and still no success.
View 7 Replies View RelatedI am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:
% Error: License file transfer failed - Error from server: File not found
I have confusion here that when I configure this command from GUI
tftp://172.32.45.22/cmm/standard.lic
What i should use for /cmm/ ????
Let say i have lic. file is on desktop of tftp server computer and I say in this command
tftp://10.12.70.35/??/license file .lic
Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.
View 1 Replies View Relatedoutput are here
*Mar 1 01:28:21.018: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 01:28:21.022: %LWAPP-3-CLIENTERRORLOG: bsnSetCurrentBHRate : fail to set
radio control and data rate
*Mar 1 01:28:21.179: %CDP_PD-2-POWER_LOW: All radios disabled - AC_ADAPTOR (00
00.0000.0000)
*Mar 1 01:28:21.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
*Mar 1 01:28:34.341: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 192.168.10.244, mask 255.255.255.0, hostname AP2c54.2d0d.c3c4
I have a WLC 5508, AIR-LAP1142N APs and a SSID for students to connect to who bring their own device. I am still testing this and it has not been rolled out but I am running into some serious issues with joining the network. I am authenticating them through a RADIUS server (2008 R2). Problem: many of them cannot connect because they are lacking the certificate.
1. What is a good setup for authentication in a BYOD environment
2. If my setup is good what can I do to allow kids to use their computers on the wireless either without the certificate (which I know is unlikely) or what do I need to have them do to connect. I am hoping it does not involve hard wiring and getting the certificate from the server.
have a Cisco 5508 controller (version 6.0.199.4) that when I enable global multicast mode it will work for an hour or two and then it will kill the network. All internet both wired and wireless, access to server everything dead. I then have to directly connect to the service port and disable the global multicast mode. Then two reasons for enabling it are Docs2Go and LanSchool both require multicast to be enabled. I have it enabled on our wired network and it works OK there. ted.
View 10 Replies View RelatedI just turned on 2 Wirelless LAN Controllers 5508 and I am getting this message on both of them:
Loading primary image (Image not found)
** Unable to read "linux.pri.img" from ide 0:2 **
Loading backup image (Image not found)
** Unable to read "linux.bak.img" from ide 0:2 **
And it is taking me to the BootMenu. I selected option 4 to Clear Configuration and the controller seems to restart the system but I still get the same error. I checked the LEDs status and Sys is Amber and Alarm is OFF which according to the documentation is a System Crash.
I have a WLC5508 with around 70 AP's (LAP1042N) connecting over an MPLS WAN network. WLC and AP's are running 7.4.100
From time to time I have an AP which disassociates from the WLC with the logging beneath. This is a problem with the AP, or is this due to network saturation between the AP and the WLC ?
And if so, should I change the default retransmit values ?
I have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View Relatedsince few weeks i configure my APs on the new WLC5508, and then, the lights are off on the AP, is it normal? however they seems to work fine. What does this light means? FW version: 7.0.22,Is it important?
View 2 Replies View RelatedI am trying to setup SSO between my primary and secondary 5508 controller, and it doesn't appear to be working. I lose connection to both devices after the reboot and then have to console in and disable redundancy manually to regain connectivity. Is there something special required for this to work that isn't apparent?
View 4 Replies View RelatedI've just gotten in two new 5508 controllers that have come preinstalled with code version 7.0.116.0. My issue is that when I go to downgrade these to 7.0.98.218 I get an error after the Image version check is passed stating the following:ERROR: Incompatible SW image. ERROR: Please install the Data Payload Encryption licensed image.I've tried multiple times to no avail, I've also gone as far as installing the LDPE image of 7.0.116.0 thinking it needed that before downgrading but it still didn't work.
View 5 Replies View Related
