Computer Connected To Router Doesn't Access Network

Jan 20, 2012

I bought a wireless router (TP-Link / TL-WR740N) an install it , it works with my laptop and telephone. no problem.now i connected another desktop computer to the router through a wire (LAN port) because the PC has no wire capability , the problem is that i cant access the net.

View 1 Replies


ADVERTISEMENT

Dell :: Studio 1737 Shows Connected To Network With Internet Access But Doesn't Work

Apr 5, 2012

I have a Dell Studio 1737 running Windows 7 64 bit. I turned it on today and it automatically connected to my home network as usual and when I hover over the network icon it says there is Internet Access but when I open Firefox it can not connect to any websites. When I run the automatic troubleshooter, it does not detect any problems with the connectivity.

I ran ipconfig /all and this is what came up: 

Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersDanny>ipconfig /allWindows IP Configuration Host Name . . . . . . . . . . . . : Danny-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical (code)

View 2 Replies View Related

Linksys Wireless Router :: X3000 How To Access The Connected HD From Computer

Jul 18, 2012

The HD connected to my X3000 Router is recognized and visible (shared folder) from my media player connected to my TV. However I can't see it from my computer to add/remove files. Isn't it possible to administer the files on the drive without disconnecting it from the router and connecting it to the computer?

View 2 Replies View Related

Linksys Wireless Router :: E1200 Computer Says That Its Connected But Have No Internet Access

Jun 22, 2012

I installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?

View 5 Replies View Related

Router Connected To Dead Wired Computer - Network Still Works?

Jan 25, 2011

MY ISP is AT&T. I have their Westell DSL modem, with a bridged connection to a Linksys wireless router. The router is connected via ethernet to a dead computer: a 7 year-old Dell desktop that will boot up but shut down right away. I have been able to connect multiple laptops wirelessly to this network. I thought an ethernet connection was required in a home network such as mine? The cable has been plugged into a dead computer for several months and frankly I'd like to get rid of the desktop. What exactly is the ethernet requirement - just to be plugged into a port? Could I theoretically just yank the ethernet card out of the desktop and use it instead of the whole dead system?

View 5 Replies View Related

Laptop Says Limited Access When Connected And Doesn't Work

Jan 26, 2013

I have connected my laptop to many many networks, but this is the first time this happened. I went to my moms today, and triied connecting but it only says limited access and full bars, and sometimes it doesnt even say its limited access...I have restarted modem Deleted network file (or whatever yhou call it, its in manage network. makes it like ive never joined it)Checked if connection switch was off on my laptop (Wasnt)Disconnected and reconnected multiple times Cry a little And restarted computer .What can i do?

View 1 Replies View Related

Computer Doesn't Like Network Cable

Apr 6, 2011

i have a computer at my company that is wired in to the network. we upgraded the core switches a while back and lost connection with the computer. i personally traced the connection back and it is plugged into the switch, but i still get no link lights on the NIC. that network drop and cable work for any other computer or laptop i plug it in to, and the problem computer in question works on any other cable/drop.

View 12 Replies View Related

Wpn824v3 - 1 Computer Connects To Wireless Other Doesn't See Network

Jun 1, 2011

I have two PC laptops. One operates Windows Vista, the other has XP. I recently just had to do a hard reset on my linksys wpn824v3 router and made a new network name and password. I also changed the password for the router (suspect I may have a virus). My girlfriends computer (vista) sees the new network name and connects fine, my XP computer doesn't even see the new network, but it sees my neighbors networks.. and the laptops are sitting right next to each other.

View 1 Replies View Related

No Internet Access Computer Shows Connected?

Aug 23, 2012

I see some other threads about this same thing but I wanted to start my own to keep track if what I did. I know zilch about computers.I have an ACER I got less than a month ago. I have Verizon mifi. Windows 7My comptuer says I am connected but it says no internet access. The wifi works fine on my old netbook though. I keep getting error 105 Unable to resolve the server's DNS address. What do I do?

View 1 Replies View Related

Computer Connected On LAN - Internet Access Is Very Slow

Nov 5, 2012

I am connected to the LAN via ethernet cable, but internet access is terribly slow - cant even browse internet properly (work network uses a proxy to connect to internet - not sure if that is relevant). I would like to remain connected to the LAN via ethernet (to provide easy connection to intranet and mail exchange server, but for outside internet connections, I would like to use a mobile 3g connection.

View 1 Replies View Related

Computer Says Connected (wireless) But Cannot Access Internet

Jul 18, 2011

We are trying to get laptop to connect to our wireless. She has entered the network key and the icon says she is connected with a excellent connection, however, we cannot connect to the internet. The other challenge is that everything is in Spanish.

View 9 Replies View Related

Dell :: XPS 8300 Computer Doesn't Recognize Network Card

May 18, 2013

My computer doesn't recognize my network card, so I need to reinstall my network drivers.There are three drivers listed for my XPS 8300...service tag.

View 1 Replies View Related

Client Are Not Connected To Server / Computer Cannot Access Internet

Jul 18, 2011

My network connection was vanish the client are not connected to server and the computer cannot access internet

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Doesn't Have Internet Access On Private Network

Jul 17, 2011

Why is it that my netbook doesn't have internet access on my Private Network? But when I connect it to my Guest Network, it does have an internet access. It's the only device I have that doesn't have internet access on my Private Network. The rest are working. I tried all the possible options to connect a device but still the problem exist.

By the way, I'm using E-1000 v2.1.02

View 1 Replies View Related

D-Link DSL 300T - Only One Computer In Network Is Connected

May 12, 2011

Earlier today my modem died so I looked around and found an old modem (D-Link DSL-300T) lying around so I decided to use that one instead of purchasing a new one.It always worked great in the past, but when I tried it today I can only find a connection on this computer (garbage computer), the other 2 computers in my network can't connect to the internet, they can't even connect to the network at all.Oh and the router I'm using is a D-Link DIR-100. This computer is running windows XP, so is another one in the network and the one I want the connection to work on is running windows 7.

View 11 Replies View Related

DGN2000 - Network Adapter Connected To Router But No Access To Internet?

Jan 8, 2011

I have a Netgear DGN2000 router wired to a desktop machine running windows 7. In another room i have another desktop machine running windows XP. I have a netgear WN111v2 network adapter connected to this machine. The network adapter says it is connect to the router, the icon in the bottom right hand corner is green and the signal strength is in high 90%s, yet when i start up internet explorer the message i get is "Internet Explorer cannot display the webpage".

Also, in the house there is a laptop running windows 7 (connected wirelessly - no problems) another laptop running windows xp (connected - no problems) and an Xbox 360 (connected ok). Been on to netgear tech support all they could suggest was to lower the security settings on the router, ultimately lowered down to disabled - still nothing. Disabled homegroup on the windows 7 machine still nothing running out of ideas now.

View 14 Replies View Related

Linksys Wireless Router :: WRT610N Network Connected - No Internet Access

Jul 8, 2011

My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
 
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
 
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
 
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.

View 1 Replies View Related

Computer Suddenly Doesn't Recognize Router

Jul 23, 2011

My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.

View 2 Replies View Related

Computer Connects To Router But Doesn't Get Internet?

Apr 25, 2011

Just purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Keep Connected To 5ghz Signal / Router Doesn't Respond To It

Jul 10, 2011

U just bought a new E4200 router to enjoy 5ghz band for the first time.I noticed the range at my house of the 5gh is smaller than 2.4 is that right?one of my pc is having trouble keep connected to the 5ghz signal or the router doenst respond to it, is there a way to improve that signal?

View 2 Replies View Related

Linksys Wireless Router :: E1500 IPad-2 Doesn't Seem To Get Properly Connected

Oct 19, 2012

I have a linksys 1500, connected to a cablemodem.  It has firmware 1.0.04 (but this problem happened with earlier firmware that it shipped with).I have a problem with the DHCP server on the E1500 - or maybe its a bad client - one of my clients, happens to be an iPad-2 doesn't seem to get properly connected.  all of my other wireless DHCP clients - windows vista, windows 7, linux, android, mac and an old iPad1 all connect without problems.  I also have wired devices that get their IP via DHCP for my TV, blu-ray, slingbox, DVR, without problems, its just this iPad2 that tries to connect, seems that it does, but can't access anything on the internet.I see this on the DCHP Client list (Status -> Local Network -> DHCP Client Table from the web interface) and I'm quite sure this is the cause of the problem with the iPad2.  that MAC address is the address of my iPad2, and that IP# is the one I reserved for it.
 
I've set up that MAC address to have a reserved IP#, and forced the client name to Rays-IPad2 (as its named on the device) but it has the same behaviour as letting the DCHP server give it an IP# from its address pool.  And if I reboot the E1500 and reboot the iPad2, it does actually connect for a few seconds, I can bring up a page in safari, etc, but soon within a few seconds, it switches the client name to this display of question-marks (non printable characters presumably) and it can no longer get to the internet.Is there anything I can do or try?  There isn't another DCHP server running on the network, I don't know if something with the cable modem is causing a conflict, and if it were I'm not sure what I could do about that.

View 3 Replies View Related

Linksys Wireless Router :: Doesn't See Shared USB Drive Connected To E3000

Jan 15, 2012

I have a E3000 with a USB hard drive plugged into it. It works perfectly as a shared storage drive from all my computers. But as a Media Server it is not working. I purchased a Sony SMP-N200 Steaming Media Server that found all the PCs in the house and can stream music and photos fine. It does not see the shared USB drive connected to the E3000. Sony's web site says it uses DLNA to find and stream music and photos. It says Windows 7 is one example of DLNA When I go to DLNA.org and check to see what routers are DLNA compliant, it says the Cisco E4200 and E4200v2 is. Is Cisco going to make a firmeware upgrade to include DLNA for the E3000?

View 6 Replies View Related

D-Link Xtreme N Dual Band Router / Access Home Wireless Network Through HP Laptop Computer

Nov 20, 2011

My home desk top is set up with D-Link Xtreme N Dual Band Router. I have no problems accessing the internet on my desk top computer. I am trying to access my home wireless network through my HP laptop computer. The wireless network status is Limited or no Connectivity. I've tried the "repair" button with no resolution. The wireless connection is set to automatic.

View 1 Replies View Related

Computer Is Connected To Router But Not Internet

Aug 7, 2012

I have a desktop and a laptop that are connected to my router but can't connect to the internet. One of our other desktops is working great. Another had the same issue and I fixed it using the "netsh int ip reset c:

[code]....

View 1 Replies View Related

No Networking With Other Computer When USB Router Connected

Sep 20, 2011

When i connect USB ruter my networking with another computer will not working

View 1 Replies View Related

D-Link DIR-655 :: Can't Get To Website When Router Connected To Computer

Apr 1, 2011

Can't get to my Web site with router is connected to my computer and when I connect to my computer with out the router in-line I can connect. I tried the reset in the back but it didn't work. 

View 11 Replies View Related

Linksys Wireless Router :: WRT54G2 Doesn't Automatically Connect To Internet On Computer Start-up

Aug 12, 2012

My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.

View 9 Replies View Related

Linksys E2500 Router - Computer Connected But No Internet?

Dec 28, 2011

Well i recently purchased a Linksys e2500 router,so i connect it to my modem and then to my PC, all by Ethernet cable(no wireless) as i want my pc connected by cable, i go through the set up CD and it finishes and says you are now connected to your router but..... not to the internet and it tells me to restart the modem with i have done, i have also tried power cycling modem, router and PC, but i still get the same old problem and when i go in network connections my local area connection says i am connected but it wont let me use the internet. also above when i have been trying to set up the router this "Internet Gateway" pops up in my network connections and it is disabled and whenever i try to enabled it it just says failed.

I'm on Cable broadband my modem is a Motorola SB5101 SURFboard cable modem and the router is an Linksys Cisco e2500 and i am using windows xp sp 3

View 4 Replies View Related

2928-SFP Doesn't Have Access To Corporate Network

Sep 30, 2012

Looking for input on creating a guest VLAN for a client. The goal is to create a guest VLAN that doesn't have access to the corporate network using one DSL modem. They currently have a managed switch (3COM Baseline Switch 2928-SFP Plus). There are no existing VLANs or guest access. Additionally, they are looking for a WAP that supports captive portal.

View 10 Replies View Related

Netgeare GS605 - Computer Crawls When Connected To Switch But Not Router

Feb 8, 2013

I just upgraded to GS605 Netgear gigabyte switches on my network, and I use Cat 5e cables, so I can use the gigabit Ethernet.

One of my Windows PCs seems to have a very slow connection. I see an active 1K link on the switch for this port, and Windows reports that the link is running at 1 Gbps, but the computer takes 3-5 minutes to load Amazon.com and has ping times on the order of 700 ms.

I have another Windows 8 PC that works perfectly fine, and I have a Mac mini which is also connected to the switch and works fine.

If I take the Ethernet cable from the messed up computer and connect it directly to the router (not the switch), it is fast again. However, connected to the router, I'm back to 100 Mbps speeds, not gigabit speeds.ipconfig gives the following output:

-Hostname: my computer's hostname
-Node type: hybrid
-IP routing enabled: no
-WINS proxy enabled: no
-IP address: my computer's DHCP address
-MAC address: my computer's MAC address
-Default gateway: my router's IP
-DHCP server address: my router's address
-IPv6 address: something long (I'm not familiar with IPv6 addresses)
-Various tunneling adapters, which are all disabled

I have had other computers in the same port on the switch and they all work fine. I also plugged this computer into a different port and had the same problem. Netgear tech support wasn't useful.I actually have another switch of the same model, but when I replaced this one with that one, it had the same problem.

I confirmed gigabit speeds between two other computers, both connected to this switch, so it does work at those speeds. Those computers also have fast Internet.I don't have any clones MAC addresses in my network, and as for logs.... the only place I can think is the log file from the router. I didn't even think of that, the only other place would be event viewer within windows.This computer dual boots Windows 7 and Windows 8, and has these issues in both OSes.

View 1 Replies View Related

Setting Up A Home Computer As A File Server Connected To The Motorola Router?

Jan 12, 2012

I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.

View 3 Replies View Related

Linksys Wireless Router :: E3200 Drops Ethernet Connected Computer

Feb 1, 2013

Running Windows 8--64 bit computer, with a SBV4200 Voice over IP cable Modem (Time-Warner Communications),  in home network. Longstanding problem with Ethernet connected computer losing connectivity to E3200.  Connectivity reestablished by powering down, cutting power to cable modem, computer, and E3200, and restarting. Other wireless connections (iphones, ipad, other dos -based laptops have no problems--never any loss of connectivity.  Things I have done to date: removed Linksys E-series software and reloaded,  updated drivers, changed all wiring to router, and checked IP addresses and they are different. 

View 2 Replies View Related

Linksys Wireless Router :: Slow Speed (50mb) When Computer Connected To E4200

Jun 30, 2012

I have the E4200 with latest firmware . When I connect my computer to the E4200 and that to my modem im getting about 50mb speed. If I disconnect the E4200 and connect my computer straight to the modem I get about 95mb speed?I have the Virgin Broadband 100mb service and all is working fine at their end.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved