Connect Linksys WRT54G2 To Motorola 2210?
Mar 25, 2011
I cannot figure out how to connect my Linksys WRT54G2 Wireless Hotspot router to my Motorola 2210 Wired Modem. I am posting while connected directly to the 2210 vial Ethernet cable. When I connect the cables between the linksys and the moto the light on the front says it sees the internet; however, I cannot ping anything except myself and it. I cannot figure out how to get either to recognize the other. My ISP is AT&T DSL. My modem is using PPPoE with both a user name and network password to access the internet
View 4 Replies
ADVERTISEMENT
Oct 29, 2011
I justed purchased a Linksys E3200 router to replace my old router that gave up the ghost. I have it paired with a Motorola 2210-02 DSL modem. The software that came with the router has created two networks but is unable to connect to the internet. I have tried on both my PC and MacBook Pro and niether work. I have the modem connected directly to my Mac and can get to the internet, so I know the modem is working correctly.
View 6 Replies
View Related
Sep 28, 2011
I'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
View 2 Replies
View Related
Jan 7, 2012
My son tried to "speed up" our connection by unplugging modem&router. now can't get both talking to each other. Tried numerous steps! Bought Router 8/11/11, so NO Support from Cisco(only 90 days-POOR!). Website useless. Modem works fine with PC wired in.
View 3 Replies
View Related
Mar 31, 2011
I had to made some hardware changes. All the computers are running windows XP. I changed out to a Motorola 2210 modem, d-link dir-825 router and DGS-1008G switch.Everything was fine until I made this change. I now have internet, but it is slow.
View 3 Replies
View Related
Apr 3, 2011
I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
View 14 Replies
View Related
Jul 3, 2011
My motorola Cliq connected to a friend's netgear router and to the free airport wifi but not to my Linksys WRT54G2 v1 router Wifi. Actually, it doesnt even see its wireless network.
View 1 Replies
View Related
Mar 22, 2011
So I've had this problem before and normally I solve it by simply unplugging everything from my modem and router but ive tried that this time several times to no avail. The internet suddenly cut out one day and when I did my usual unplugging thing it came back unbearably slow.Right now I'm running off a motorola SB5100 Surboard modem and a linksys WRT54G2 router and its not my computer, everyone in the house is getting terrible speed.
View 10 Replies
View Related
Oct 15, 2012
For some reason, a couple of days from today, my Cisco wrt54g2 drops ip assigned by Motorola modem.It gets it back after a while (10 mins) and works for another 15 minutes.
View 3 Replies
View Related
Apr 27, 2011
I bought a Vizio TV wi-fi ready. I have to install a wireless router to use the appsHow will installing the wireless router affect my hp psc 2210 Printer?
View 5 Replies
View Related
Jul 24, 2010
I can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
Some info:
1) Cable modem works perfectly when connected directly to computer ethernet port
2) ISP is Optimum Online
3) Using Automatic DHCP setting on router
4) Using MAC cloning on router
5) I can access the router's admin screen from the PC
6) I can connect to the router wirelessly, but no internet access
7) I've tried powering down everything multiple times, still no internet access
8) I upgraded the router firmware to 4.30.14
9) The "link" light on the cable modem never lights up when connected to the router
View 9 Replies
View Related
Jul 7, 2011
I've been connecting my WRT54G2 router to our modem, and then using another ethernet cable to connect to my PC. That way I can have a wireless connection in my room and also be connected on my desktop. However, recently, I reset my router because I was having connection issues with a certain program, and I ran the setup CD afterwards just like I have every single time I've done this, but now I can't connect. I can access the router settings and everything just fine.It says I have a connection, and when I connect my desktop directly to my modem, I can connect just fine. When I have the router connected to the modem and try and connect wirelessly with another device, the access point pops up, and it begins to connect, but then fails in the end.
View 9 Replies
View Related
May 8, 2012
I lost my installation cd for my Linksys devise. How can I find free instructions to connect manually?
View 1 Replies
View Related
Nov 4, 2012
I'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies
View Related
Oct 5, 2011
Went away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
View 2 Replies
View Related
Jul 8, 2011
When I connect the ethernet directly to my mac the internet works fine, but when I try to connect through my Linksys WRT54G2 V1 Wireless-G Broadband Router I can't connect to the internet. Omitting a few minor problems, my router has been working fine for the past year and a half. Recently it started giving me trouble so i have started trying a number of things to fix it, but I'm no expert in this category. The other day i tried updating the firmware which actually worked for a couple of hours, but then stopped working again.
View 3 Replies
View Related
Mar 11, 2012
I have a Linksys WRT54G2 V1 and since I bought my new notebook with Windows 7 I can not access the wifi. I have another notebooks with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading the password.I Update the firmware to version 1.0.04 (this the latest version I found on the cisco site), but still don't work.I Try chatting with Cisco support and was told he was no longer under warranty.
View 6 Replies
View Related
Apr 2, 2009
Just got the WRT54G2 and setup it fine with or without encrytion and passwords - however when I setup the other 2 pcs on my network - the only way I can get them setup and going is WITHOUT encryption and password protection - setiing up without encryption on those works fine, but it defeats the purpose of what I'm trying to do. I was on the phone with Linksys for over an hour and they can't seem to get it to work either - guess they got stumped and after an hour - I was put on hold and then cut off.
View 9 Replies
View Related
Jan 20, 2012
Been trying to connect to the internet through the modem with ethernet cabe and it repeatedly does not connect. I've set up teh router with the linksys setup program and still nothing.
View 1 Replies
View Related
Feb 17, 2011
My laptop connects fine, so I know it is working, but I cannot get my IPhone to connect. I keep getting an error message stating "Incorrect Password" but I know the password entered is correct.
View 9 Replies
View Related
Jan 2, 2009
I have a WRT54G2 router with a desktop wired to it. The desktop is mine and my roommate wirelessly connects with her laptop and has been doing so no problem for about 6 months (ever since we got the router). On Christmas Eve, she was connected, went out, came home and found she'd lost her wireless connection. Now she can't get it back.I can still get online on the desktop.i've power cycled to no avail. What is weird is sometimes she will click on the list of available networks (so she can choose which she wants to connect to) and mine WILL be there, other times it will NOT. If she does happen to catch it at a moment when my network is there, and she tries to connect using the passphrase, it says "Trying to connect" or something to that effect, for like 3 minutes and then nothing happens. Also, not that I would need to, but if I go to "connect to" on my PC (as if I were looking to choose a network to connect to), my network name doesn't always show. It is random. Sometimes it does not even show when I go to "Networks" on my desktop.
View 9 Replies
View Related
Jun 21, 2009
I cannot establish a local connection between my new WRT54G2 v1 and my Slingbox Classic. I have reset the Slingbox to factory default settings and run the Sling setup wizard but keep getting told that "No Slingoxes Exist on network". The link light is on on both the router and the Slingbox. Slingbox does not show up in the DHCP host table.
View 4 Replies
View Related
May 21, 2012
No issues with other wireless devices in the house (HP laptop, Roku and an Android phone).
I've confirmed that the correct WEP security setting is selected. I've tried using every available key to no avail. I've reset the security keys. The latest firmware is installed (1.0.04) I've powered the router on/off.
[URL]
View 2 Replies
View Related
Nov 5, 2011
I recently purchased a smart phone that can use my wireless access to get to the internet, however the phone cannot connect. I have verified that I am using the correct password and it is finding the network just fine, it just can't connect. I have had this problem with my laptops as well, but with them I just copied the key to a USB key and used that to get them going. I don't have that ability with the smart phone.
how to best troubleshoot this issue and resolve it? I have also reset the router to allow anonymous internet access with no positive result there either.
View 1 Replies
View Related
Mar 29, 2012
I cannot get my JE200 reader to connect. I keep getting an error message stating "No networks available". I have been able to connect my e-reader to other wireless networks so I know it works.
View 3 Replies
View Related
Dec 25, 2012
We purchased a Canon MG 3100 printer but am unable to connect. Have rebooted router but still no joy.
View 5 Replies
View Related
Jul 11, 2011
I recently (~month ago) switched to a new computer after my old one (which I had configured the router on previously with no problems) died.Since then, I have been unable to access my router's config page (entering in the ip address simply results in a blank page with no prompt for username/password). Switching browsers (I've tried Firefox 5 and IE 8) does not solve the problem, nor does disabling AdBlockPlus/NoScript on Firefox. Any way to access my router so I can begin forwarding ports again?
View 1 Replies
View Related
Apr 28, 2013
- How can I connect an old 2600 router to a linksys WRT54G2. to access the internet. I think it is not possible
- What device do i need to be able to do it
View 5 Replies
View Related
Jan 8, 2013
I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 5 Replies
View Related
Jan 8, 2013
I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 1 Replies
View Related
Dec 29, 2011
In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
View 2 Replies
View Related
Aug 12, 2012
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies
View Related
Jan 11, 2012
im trying to gain access to my router to make a port forwarding, so other ppl from the e-net can connect to my computer in that port. i have tryed to use my ip, my net-mask, everything but the webbrowser simply says it cant find the site im trying to connect to
View 6 Replies
View Related
