im trying to gain access to my router to make a port forwarding, so other ppl from the e-net can connect to my computer in that port. i have tryed to use my ip, my net-mask, everything but the webbrowser simply says it cant find the site im trying to connect to
View 6 RepliesI can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
Some info:
1) Cable modem works perfectly when connected directly to computer ethernet port
2) ISP is Optimum Online
3) Using Automatic DHCP setting on router
4) Using MAC cloning on router
5) I can access the router's admin screen from the PC
6) I can connect to the router wirelessly, but no internet access
7) I've tried powering down everything multiple times, still no internet access
8) I upgraded the router firmware to 4.30.14
9) The "link" light on the cable modem never lights up when connected to the router
I justed purchased a Linksys E3200 router to replace my old router that gave up the ghost. I have it paired with a Motorola 2210-02 DSL modem. The software that came with the router has created two networks but is unable to connect to the internet. I have tried on both my PC and MacBook Pro and niether work. I have the modem connected directly to my Mac and can get to the internet, so I know the modem is working correctly.
View 6 Replies View RelatedWhen I plug my desktop into my wireless router I have slow internet but when I plug directly into the modem I have no connection at all. It says "cannot connect to primary DNS server". I'm using a Motorola SURBOARD SB6121 and a NETGEAR WPN824V2 Wireless Router. When I do ipconig /all this is what I get:
View 11 Replies View RelatedI cannot figure out how to connect my Linksys WRT54G2 Wireless Hotspot router to my Motorola 2210 Wired Modem. I am posting while connected directly to the 2210 vial Ethernet cable. When I connect the cables between the linksys and the moto the light on the front says it sees the internet; however, I cannot ping anything except myself and it. I cannot figure out how to get either to recognize the other. My ISP is AT&T DSL. My modem is using PPPoE with both a user name and network password to access the internet
View 4 Replies View RelatedI have a Motorola Xoom 4.0 I try to connect the internet when I go to MacDonald or Starbucks or even to the church I go to but is impossible. The only way I get connection is in my house with my router.
View 1 Replies View RelatedI can't get my PC to connect to my broadband. I am running windows 7 64 bit and use the following:
Motorola Surfboard SB6120 modem;
NetGear WGR614 wireless router
I am able to connect with other devices (iPhone, Roku) to my wireless through the wireless router. My computer recognizes the broadband connection, but it won't connect to it. I get two errors when I try to connect:651: the modem has reported an error, and 638: the remote server is not responding in a timely fashion.I have tried connecting the ethernet cable directly to the modem, but I get the same results.Also, I have tried to cycle down the computer, router, then modem and turn them back on in reverse with no change in results.The connection worked until I clicked "disable connection" one day when I had trouble connecting (high traffic i think). Since then, the"home group" I set up originally with the connection wizard disappeared, and it had not been able to connect since then. When I try to connect I click on a small icon in the lower right that says, "not connected, connection available", then I click on the button to connect to broadband and get the errors described above.
My son has Compaq Presario C700 (C769US) with an Atheros AR5007 802.11b/g wifi adapter. I can connect his lapatop to our Motorola SBG 6580, but then cannot connect to the internet. I get the error that the DNS lookup failed. I have looked everywhere on the HP site, and have talked to the Motorola people. I can't download an updated driver without the internet (I don't think)
View 19 Replies View RelatedI've been trying to connect my D-Link DIR-601 router with a Motorola SBG901 cable modem. The modem itself has a built-in WIFI (G) and one ethernet port, but not good enough for my purposes. I need more wired connections and an (N) WIFI connection, which the D-Link could provide, if I could get it to work. I just cannot get the two pieces of equipment to talk to each other. I can set up 2 independent LAN's, but no WAN (internet connection) from either. D-Link has provided pages of instrutions, but nothing works.
View 1 Replies View Relatedwhere is the WEP located on my att Motorola router?
View 1 Replies View RelatedI have a desktop, Sony VAIO laptop, and a Motorola router and modem combination. Both computers are running Windows 7 professional. The desktop is running the 32 bit version and the laptop the 64 bit software.When I first got my router, I could access my laptop from the desktop but after a crash on the desktop and reinstallation of everything, I can no longer access the laptop. I have set up file sharing on the laptop but it still will not allow access. Here is the message that appears when I try go access a folder on the laptop:"Windows cannot access \name-VAIOackups,You do not have permission to access \name-VAIOackups"
View 3 Replies View RelatedI'm using comcast broadband, motorola SB6121 modem and a edimax br-6424n wireless router.I set up everything myself and it worked great for 3 weeks.Usually, I have 2 laptops connected and iPad.[CODE]
View 1 Replies View RelatedI am having trouble identifying exactly with Modem/Router I have. The only Numbers I see is the FCC #, Serial Number and a WEP access Number.
View 3 Replies View RelatedI have this motorola router, SURFBOARD SVG1202 and I can't connect to my university VPN. It says my router is blocking the communication. After some days trying to understand why, I saw that it was needed to enable some options at 192.168.0.1. So, I went there and enabled IPsec PassThrough and PPTP PassThrough under the router options and also added my MAC Addr. Then I restarted the router, However when I try to connect into it again (via DHCP, auto IP), it says "null/limited connection" ( I cant even try a vpn connection, Since it is null/limited, I have to choose static ip mode, inserting a IP/gateway/my service DNS under network options, then I can connect to internet again (see image), but router is still blocking the VPN access, hanging at "verifying account. And password." later gives error 619 related to router blocking
View 4 Replies View RelatedI have time warner internet service and just upgraded my service to their extreme internet. In doing so I had to change my modem to a docis 3.0 modem; the motorola sbg6580. Its a modem that has a router and wifi built in but its really bad and not nearly as good as my net-gear router.
View 6 Replies View RelatedI have a WiFi setup where the wifi signal can go to 2 houses on my long-range property. One wifi router (Motorola WR850G w/ newest firmware update) is up on a pole between 2 of the houses. I could access it fine via wifi on my PC ever since i set it up a while back, but I was messing with it one day last week (nothing major changed), and all of a sudden now I cannot access the router setup page no matter what! (IP=192.168.10.1 by default).... it just simply times out now and gives me the 30 seconds loop to a page not displayed error in my browser.
I really would like to reset it via wifi, since its up powered on the pole outside, it'd be difficult to get up there and reset it myself. Is there a way I can get access to the page again in any way, by only using wifi from my PC????
The WiFi works great either way, and pinging to the router is 1ms so I just don't get it! Things I've done:
1. Pinged router, pings fine from any PC via WiFi...
2. Changed PC from DHCP, to 192.168.10.8 to get a non-used IP, since maybe it was timing out to the 192.168.10.7 IP I was using via DHCP. No go, it still times out no matter which PC or IP I have!
I recently borrowed a friend's desktop and I am having issues with connecting with the router through an ethernet cable. I go to troubleshoot the problem and I get "Local Area Connection 2 doesn't have a valid IP configuration". Its nothing with the router because when I plug my laptop in with the same ethernet cable, I am able to connect perfectly.
View 19 Replies View RelatedI switched to comcast internet recently and got a new modem. The modem is the telephony Arris one, but the problem is that I already have a Motorola SBG6580 but can not use that for my wireless laptop options. I want to be able to use the SBG6580 as my access point and LAN, but it isn't allowed any internet to share wirelessly?
View 3 Replies View RelatedSuddenly either of my 2 wireless routers won't work. Modem works fine directly to pcIntroducing wireless router to the mix, not working. Everything hooked up correctly.
View 1 Replies View RelatedI recently got a Motorola NVG510 (from AT&T, they changed our internet plan and sent a new router) and since then I've had problems with Skype. I think I've narrowed the problem down to there being no upnp on this router to enable, and Skype doesn't like that.So, is there any way I can make this option available, or some other way to 'simulate' upnp so Skype will play nice? I read somewhere else that "IP Passthrough" may be an option, but I'm unsure about that.
View 1 Replies View RelatedI have a Motorola SBG901 router. Typing ipconfig showed that 172.18.8.1 is the Default Gateway and this is the URL I always used to access the router login page.
I reset the router today by holding the reset button. Now typing the URL 172.18.8.1 does not work. The router user guide says to go to 192.168.0.1. I have tried this but it also does not work. For both I just get the "problem loading page" in Firefox.
The Internet works fine both with an ethernet connection and wirelessly. My only issue is that I cannot access the Motorola router login page. I could access it fine this morning before I reset the router.
Hardware: Modem-Motorola SBV5222 Router-Linksys E2000(Cisco brand name? I didn't buy the router) I use a PC with windows xp with sp 2 and 3 installed.Problem: I can use the internet just fine when I am connected to the router, my pc is connected directly to the router via cat 5 but when I directly connect to the modem I get limited to no connectivity. I'm not using a proxy server and before the router was set up(I live with roommates who set up the wireless network.) I could connect to the modem just fine. I can't repair the connection since it seems to be unable to renew the ip address. I've also tried to manually configure my ip address though I'm sure it wasn't the issue.I've racked my brain to think of a simple solution and it doesn't seem one is apparent and I'm almost sure it's something to do with xp and I'm not so great with software.
View 4 Replies View RelatedMy motorola Cliq connected to a friend's netgear router and to the free airport wifi but not to my Linksys WRT54G2 v1 router Wifi. Actually, it doesnt even see its wireless network.
View 1 Replies View RelatedTrying to set up the Cisco VPN router for remote acces to our network.We have ATT Uverse DSL and it is a Motorola Router, i think NGT 510.the Uverse router has very limited setup options.I cannot set it up as a bridge.The only thing I can figure out is to set the ip passthrough option to the VPN router.We have a static ip address for our internet service.
I have tried several setup and connection options, but cannot get it to work.
1. How to physically connect the routers and network devices?
2. How to setup both routers to play nice.
My Motorola 850G router is several years old and working fine. However, my wi-fi connection is presently "unsecured" and I need some assistance as to how to go about setting up a secure network. My browser is not recognizing the router's default IP address.
View 1 Replies View RelatedI am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle.
View 12 Replies View RelatedI'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
I cant seem to to connect to my nintendo i have a motorala surfboard SBG6580
View 1 Replies View RelatedI have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router. I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.
Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.
What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.
View 3 Replies View RelatedI am trying to setup a Linksys E2500 router with a Motorola RG2200C Residential Gateway. The Motorola box provides TV and DSL output. Currently a Linksys BEFSR81 router is connected and works fine. With the E2500, running Cisco Connect it gets to 90% complete and then times out. I'm guessing at that point it is trying to connect to the Internet.Support had me download the latest Cisco Connect, but it had the same problem. I have tried various things manually configuring the router with no success.
View 9 Replies View RelatedCan I plug my HP 3210 printer into my router usb and print wirelessly from my moterola droid ?
View 1 Replies View RelatedMy son tried to "speed up" our connection by unplugging modem&router. now can't get both talking to each other. Tried numerous steps! Bought Router 8/11/11, so NO Support from Cisco(only 90 days-POOR!). Website useless. Modem works fine with PC wired in.
View 3 Replies View Related