Suddenly either of my 2 wireless routers won't work. Modem works fine directly to pcIntroducing wireless router to the mix, not working. Everything hooked up correctly.
View 1 Replies
I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies View RelatedWould this work ?. also, on the back of the modem is a rectangular, not the typical, usb slot. I cannot move the modem because it is connected to the wall. I don't want to use an extra long wire either. What do I need to buy so I can use the wired modem, as a wireless one on my pc downstairs ?
View 6 Replies View RelatedI can't get my PC to connect to my broadband. I am running windows 7 64 bit and use the following:
Motorola Surfboard SB6120 modem;
NetGear WGR614 wireless router
I am able to connect with other devices (iPhone, Roku) to my wireless through the wireless router. My computer recognizes the broadband connection, but it won't connect to it. I get two errors when I try to connect:651: the modem has reported an error, and 638: the remote server is not responding in a timely fashion.I have tried connecting the ethernet cable directly to the modem, but I get the same results.Also, I have tried to cycle down the computer, router, then modem and turn them back on in reverse with no change in results.The connection worked until I clicked "disable connection" one day when I had trouble connecting (high traffic i think). Since then, the"home group" I set up originally with the connection wizard disappeared, and it had not been able to connect since then. When I try to connect I click on a small icon in the lower right that says, "not connected, connection available", then I click on the button to connect to broadband and get the errors described above.
I have a Motorola surfboard sb5101. Provider is comcast.I have never had any problem with my equipment until now. Here is whats going on. I bought a used sb5101 a week ago so that I would not have to pay the rental fee anymore. Comcast activated it, and it worked fine for a week or two. The other night I got disconnected from XBOX live randomly in the middle of a game. Thought maybe just a hickup, no biggie. Well it happened 3 more times in a few hours, then again the next day.So thinking maybe this used modem is bad, I plugged back in the rental from comcast which I still had. Worked fine for a while, then the same thing, random dissconnects after 10 min, 30 min, 2 hrs into a game...etcOn both modems, the 1st and 4th green light are solid, the 2nd and 3rd green light are flashing when the connection from LIVE drops.So I'm starting to think know that neither of the modems are bad. I then try going directly to the modem instead of the router, never had any problems with the router but figured I try.I even went into the attic and got rid of the 4 way splitter that feeds cable into all the bedrooms and put in a 2 way instead hooking up only the cable line im using for xbox. Thought maybe the signal is getting degraded to bad, eventhough never had a problem before.So now I'm practically hooked up right to the line coming off the street, ethernet cord plugged directly into the modem, no router. Still dropping connections randomly with same 2nd and 3rd light flashing.The connection needs to be completely stable for multiple hours.Also, I called comcast when I had to reactivate the rental modem, so they did refreshed that modem and reactivate it, but still had the disconnects the next day.
View 7 Replies View RelatedI need to replace my old router because the wires are broken and the problem is it needs a phone jack for the phone line we use cable not land line. My modem is SVB5120 SURFboard Motorola.
View 2 Replies View RelatedToday I purchased a Motorola SURFboard extreme Cable Modem DOCSIS 3.0 in order to replace my old modem which is out of date and has been very slow as of late. I connected the coaxial cable, Ethernet cable(to Linksys wireless router), and power expecting it to simply work. All four lights came on green (power, downstream, upstream, connectivity). The downstream light turned blue which indicates a bonded connection.The device light was blinking on the modem. I connected to my wireless router, but no internet access. I then tried connecting my laptop to the modem directly via Ethernet cable, still no access. I think that rules out the router being the problem. I also ruled out my laptop being the problem as the same thing is occurring with my other laptop and desktop. I called my ISP (Cox Cable) and had them re-establish connection with my modem, this did nothing. I thought for sure this meant I had purchased a faulty modem; I hooked up my old modem and the results were the same, the modem connected fully with no problem (all four lights were green) but I have no internet access.
View 3 Replies View RelatedI can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
Some info:
1) Cable modem works perfectly when connected directly to computer ethernet port
2) ISP is Optimum Online
3) Using Automatic DHCP setting on router
4) Using MAC cloning on router
5) I can access the router's admin screen from the PC
6) I can connect to the router wirelessly, but no internet access
7) I've tried powering down everything multiple times, still no internet access
8) I upgraded the router firmware to 4.30.14
9) The "link" light on the cable modem never lights up when connected to the router
So I just noticed on my Cable modem the link light is blinking orange, per Motorola if its blinking orange - Computer is connected via a 10 mbps or 100 mbps Ethernet port.
On the Linksys E4200 status page it says
Internet Port Speed:
Internet 10/100 mbps
Local Port Speed Port 1 - 1Gbps
Maybe I just noticed this with this router, but I'm pretty sure this didn't start happening until I updated to 1.0.03.
Previously the link light was blue indicating a 1Gbps connection.
I use Motorola SBG 900 Wireless Surfboard Gateway with Timewarner service provider. I have couple of problems....
Problem 1 : I use VOIP phone (Vonage) which connected to my Motorola wireless device, current when i call somebody using VOIP phone, they can hear my voice but i cant hear them... Last years i dont have any problem but last one month above problem exists.
Problem 2: I tried Speed test with cable (13MBPS download stream) but through wireless (6MBPS download stream)
I own a Motorola SurfBoard SBG900 wireless modem. It has worked fine for years. I just went on vacation for 2 weeks and unplugged my computers, printer, modem etc. Upon returning I can not get any wireless signal from my sbg900. The wireless light at the bottom is no longer lit up either. I can connect via ethernet cable however.
View 1 Replies View RelatedThe only way we can use our Motorola router is unencrypted. I have gone into the router numerous times and reset it, unplugged it, retyped the WEP key, tried to shift to WPA and nothing works. None of three computers in the house will connect unless all encryption is off. We live in a good neighborhood on a cul de sac, don't get a lot of traffic through here, and know the immediate neighbors, but nothing is stopping a stranger with a laptop from sitting on the street and using our wifi. I've talked to the Comcast tech. The trouble just seems to be our boxes won't get past the WEP encryption stage.
View 8 Replies View RelatedI have second hand motorola surf board and it has been deactivated from the company. how can i reset it and activate it to my computer manually.
View 6 Replies View RelatedI was wondering if it was possible to connect my Motorola Surfboard SB6141 to my xbox 360. The internet works fine on my computer but when I plug the cable into my xbox it doesn't connect to live at all.
View 7 Replies View RelatedI have a Surfboard 5120, which has both Ethernet and USB ports. According to the manual, a different PC (or, in the case of the Ethernet port, PC or switch) can be connected to each.
The ethernet port is already connected via a long, in-wall RJ-45 line to a Netgear wireless router elsewhere in the house.
As of yesterday, sitting next to the Surfboard I now have a network-ready Onkyo AVR (audio-visual receiver) with Ethernet port. I am wondering if I can use a simple USB to Ethernet connector to provide internet to the Onkyo. I am not very network savvy and don't know if the AVR would be able to connect okay.
My "network savvy" is so bad that I will probably screw it up if I were to connect the cable modem's single ethernet port to a switch, and then attempt to connect that switch to both the Netgear wireless route and also the Onkyo AVR (assign IP addresses etc).
I have a SB6121 Motorola Modem for my Comcast Service.The modem is supposed to give out an ip range of 192.168.100.11-40When I reboot the modem I temporarily get a 192.168.100.12 IP address but then somehow it changes to a 68.42.83.47 ip.I can't get it to stick on the 192.168.100.x network so I can't access anything.Before I had my pc connected to a Netgear Router which received the internet from the SB6121 but I am needing to troubleshoot some issues with a freePBX server so I plugged straight into the gateway.
View 2 Replies View RelatedI have a 2nd computer wired up to my modem, but the LAN keeps randomly dropping every 2-5 hours It never drops for my main computer.I tried swapping cords and ports, but it still disconnects, while my main computer remains connected The internet worked fine when connected to another modem in another house.Do you think this is a problem with the modem or Windows7?I hard-reset the modem to factory settings, but it still happens.the modem is a Motorola Surfboard SBG6580
View 1 Replies View RelatedI have a Motorola SURFBoard 6580 as my cable modem + router + 802.11n AP. I wanted to add an AP on the second floor of the house for better signal. I have read that APs from different manuafacturers are not necessarily compatible for seamless roaming. Well, I guess the worst case is to turn off wifi on the SURFBoard and get 2 identical APs, but that's not ideal.
View 2 Replies View RelatedI have Comcast and my modem is indicating (blue light ) that my signal incoming is weak but my out going is fine. I tried resetting the modem ...no change . Is my problem with the modem or Comcast ?
View 2 Replies View RelatedHow do you port forward Minecraft on a Motorola SBG6580 because I tried it and it didn't work I really want to have my own minecraft server,Dont say to go to portforward.com because I tried it and it didn't work it says the port is still closed when I check it on yougetsignal.com
View 5 Replies View RelatedMotorola Surfboard 6121, Every since Com-cast has updated their network (two months ago), my Internet connection is VERY unstable.Com-cast says it is my problem because I can get reliable service at high speed using just my laptop: Win 7, and the Motorola modem. The modem does show high speed connection (blue light) when the only thing connected is the laptop.If I connect the rest of the home network; ,LinkSys BEFSR11 router, Netgear FS #108 10/100 switch, then my laptop. The Surfboard modems light turns orange (lower connection speeds). do I need to replace my NetGear switch and my router? This constant up and down intermittent connection is terrible!
View 4 Replies View RelatedMy computer is not wireless so I have needed a wireless router from Time Warner. Directions tell me to connect to my computer. Will that solve the fact that my computer is not built in wireless?
View 2 Replies View Relatedim trying to get my linksys router to work and it wont. when i have it hardwired PC to cable modem it works fine but i try to plug in the router and the internet stops working. i can see the router and connect to it but it says no internet access. samething happens on both my PC running Xp and dell laptop running win7.
View 12 Replies View RelatedMy son tried to "speed up" our connection by unplugging modem&router. now can't get both talking to each other. Tried numerous steps! Bought Router 8/11/11, so NO Support from Cisco(only 90 days-POOR!). Website useless. Modem works fine with PC wired in.
View 3 Replies View RelatedI recently borrowed a friend's desktop and I am having issues with connecting with the router through an ethernet cable. I go to troubleshoot the problem and I get "Local Area Connection 2 doesn't have a valid IP configuration". Its nothing with the router because when I plug my laptop in with the same ethernet cable, I am able to connect perfectly.
View 19 Replies View RelatedHardware: Modem-Motorola SBV5222 Router-Linksys E2000(Cisco brand name? I didn't buy the router) I use a PC with windows xp with sp 2 and 3 installed.Problem: I can use the internet just fine when I am connected to the router, my pc is connected directly to the router via cat 5 but when I directly connect to the modem I get limited to no connectivity. I'm not using a proxy server and before the router was set up(I live with roommates who set up the wireless network.) I could connect to the modem just fine. I can't repair the connection since it seems to be unable to renew the ip address. I've also tried to manually configure my ip address though I'm sure it wasn't the issue.I've racked my brain to think of a simple solution and it doesn't seem one is apparent and I'm almost sure it's something to do with xp and I'm not so great with software.
View 4 Replies View RelatedI am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle.
View 12 Replies View RelatedI'm not that great at networking, I'm pretty much a novice but I'm trying to connect a modem and router to my computer but get around bridging the modem if possible. You see, I am working with AT&T and their dsl modem access page only works for me if the modem is unbridged. If I bridge the modem, I cannot get on the page again to unbridge it while I am trying to hook up my router. When I need them to unbridge the modem, I have to stay on hold for hours. One guy even told me that he did unbridge the modem, but since my internet persisted not to work, he told me my ethernet card went bad of a sudden on my computer. I knew this was incorrect so after a few more hours on hold, I had a lady debate with me that she was not unbridging my modem since it was my ethernet card that was bad and not the bridging. Finally, laughing to herself, she unbridged the modem for me and it worked
Here is what I have: My modem is a Motorola 2210 Style: MSTATEA My router is a Linksys WRT120N
As of right now, I just have a LAN with my modem plugged in through an ethernet cord to my PC. Is there a way of me hooking up my Linksys router to my modem and PC without bridging the modem? If so, where can I find out instructions for this?
I have a 192.168.1.xxx network connected to Verizon FIOS via Actiontec MOCA / router. I also have a 192.168.15.xxx network connected to Comcast via Motorola VT2442 router (used for Vonage) and a Motorola SB6121 cable modem.
Each network has it's own gigabit switch connected to each router. The two networks are physically separated but switches and routers are physically side by side.
What is the best configuration to allow devices on 192.168.1.xxx network to communicate with devices on the 192.168.15.xxx network (share printers, NAS, etc), but still have each network served by it's respective ISP, and each device still get it's dhcp, dns, gateway, etc from each respective router?
I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.
View 14 Replies View RelatedSo I've had this problem before and normally I solve it by simply unplugging everything from my modem and router but ive tried that this time several times to no avail. The internet suddenly cut out one day and when I did my usual unplugging thing it came back unbearably slow.Right now I'm running off a motorola SB5100 Surboard modem and a linksys WRT54G2 router and its not my computer, everyone in the house is getting terrible speed.
View 10 Replies View RelatedI have an HP Pavilion wireless laptop with windows vista and a gateway desktop, windows XP Home edition and every thing worked ok untill I got a virus on my desktop Since then I've formated the hard disks and reloaded the opering systems, but I don't know how to get the laptop working wirelessly without taking the motorola modem and connecting it directly to the laptop, I have a D-Link DIR-615 router.
View 4 Replies View RelatedFor some reason, a couple of days from today, my Cisco wrt54g2 drops ip assigned by Motorola modem.It gets it back after a while (10 mins) and works for another 15 minutes.
View 3 Replies View Related
