Linksys Wireless Router :: E2500 And Motorola RG2200C Residential Gateway?
Jan 6, 2013
I am trying to setup a Linksys E2500 router with a Motorola RG2200C Residential Gateway. The Motorola box provides TV and DSL output. Currently a Linksys BEFSR81 router is connected and works fine. With the E2500, running Cisco Connect it gets to 90% complete and then times out. I'm guessing at that point it is trying to connect to the Internet.Support had me download the latest Cisco Connect, but it had the same problem. I have tried various things manually configuring the router with no success.
View 9 Replies
ADVERTISEMENT
Dec 5, 2010
how can I open SIP port on the DDR2200. I can log in to the router an make any change but the ALG option don't appears in the menu and I can't find a command to unbind SIP in the command line.
View 2 Replies
View Related
Jan 31, 2013
Everything in our small network worked until today when I had to manually reset the router. We run a application through a provider which requires that we view it from the same IP address for access. We have a statis IP assigned by our ISP solely for this purpose. For simplicity, lets us 23.11.23.176 as the statis assigned by our ISP and 23.11.23.175 as the gateway also assigned by our ISP. The application we need to browse requires that we use the 23.11.23.175 address else it is blocked from viewing. When we hard line into the modem, we are able to browse it fine. When I connect the CISCO router and do it wirelessly, it shows our address as 23.11.23.176 what are the required steps in order to set the CISCO router to use the Gateway address as the browsing IP for computers connected to it. We had set it up about a year ago, and i completely forgot how.
View 2 Replies
View Related
May 4, 2012
I cant seem to to connect to my nintendo i have a motorala surfboard SBG6580
View 1 Replies
View Related
Mar 16, 2011
I switched to comcast internet recently and got a new modem. The modem is the telephony Arris one, but the problem is that I already have a Motorola SBG6580 but can not use that for my wireless laptop options. I want to be able to use the SBG6580 as my access point and LAN, but it isn't allowed any internet to share wirelessly?
View 3 Replies
View Related
Sep 4, 2011
I use Motorola SBG 900 Wireless Surfboard Gateway with Timewarner service provider. I have couple of problems....
Problem 1 : I use VOIP phone (Vonage) which connected to my Motorola wireless device, current when i call somebody using VOIP phone, they can hear my voice but i cant hear them... Last years i dont have any problem but last one month above problem exists.
Problem 2: I tried Speed test with cable (13MBPS download stream) but through wireless (6MBPS download stream)
View 2 Replies
View Related
Oct 2, 2012
Since the new cable company won't let me use my SB6141, I need to pick up a new cable modem. One that works with Oceanic TWC is the new SBG6580. It has wireless built-in; however, I don't want to use it. Is it possible to use this modem and leave the wireless off? Or does the wireless automatically turn-on whenever the modem is on? With all that said, is the built-in wireless any good? I recently purchased an ASUS RT-56 and would prefer using it to some built-in system.
View 11 Replies
View Related
Jul 24, 2010
I can't connect my router (WRT54GL) to my new cable modem (Motorola Surfboard SB6120).
Some info:
1) Cable modem works perfectly when connected directly to computer ethernet port
2) ISP is Optimum Online
3) Using Automatic DHCP setting on router
4) Using MAC cloning on router
5) I can access the router's admin screen from the PC
6) I can connect to the router wirelessly, but no internet access
7) I've tried powering down everything multiple times, still no internet access
8) I upgraded the router firmware to 4.30.14
9) The "link" light on the cable modem never lights up when connected to the router
View 9 Replies
View Related
Jul 3, 2011
My motorola Cliq connected to a friend's netgear router and to the free airport wifi but not to my Linksys WRT54G2 v1 router Wifi. Actually, it doesnt even see its wireless network.
View 1 Replies
View Related
Jan 27, 2012
Can I plug my HP 3210 printer into my router usb and print wirelessly from my moterola droid ?
View 1 Replies
View Related
Oct 29, 2011
I justed purchased a Linksys E3200 router to replace my old router that gave up the ghost. I have it paired with a Motorola 2210-02 DSL modem. The software that came with the router has created two networks but is unable to connect to the internet. I have tried on both my PC and MacBook Pro and niether work. I have the modem connected directly to my Mac and can get to the internet, so I know the modem is working correctly.
View 6 Replies
View Related
Jan 7, 2012
My son tried to "speed up" our connection by unplugging modem&router. now can't get both talking to each other. Tried numerous steps! Bought Router 8/11/11, so NO Support from Cisco(only 90 days-POOR!). Website useless. Modem works fine with PC wired in.
View 3 Replies
View Related
Oct 19, 2011
So I just noticed on my Cable modem the link light is blinking orange, per Motorola if its blinking orange - Computer is connected via a 10 mbps or 100 mbps Ethernet port.
On the Linksys E4200 status page it says
Internet Port Speed:
Internet 10/100 mbps
Local Port Speed Port 1 - 1Gbps
Maybe I just noticed this with this router, but I'm pretty sure this didn't start happening until I updated to 1.0.03.
Previously the link light was blue indicating a 1Gbps connection.
View 4 Replies
View Related
Jun 10, 2011
I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies
View Related
Jan 24, 2012
I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.
Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256 AES-128 IPSec Setup3DES Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:
[code].....
View 1 Replies
View Related
Jul 11, 2012
My two RV042 , one at home and the other one at my working site, constantly lost VPN connection after successfully connected.Both Firmware are identical. [code]
View 1 Replies
View Related
Feb 8, 2011
we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?
View 1 Replies
View Related
Mar 22, 2011
I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
I cannot ping the computers with static ip configuration.
In local an remote computers who have DHCP ip configuration i can ping each other .
View 1 Replies
View Related
Jul 26, 2012
We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network. I am unable to ping between routers, let alone ping computers behind those routers.
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic. I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
To me it seems like a firewall issue at branch 2, but what's causing this. Also they are currently running 2 differnet firmware version not sure if this would cause a problem.
View 1 Replies
View Related
Apr 6, 2013
i am trying to setup a vpn Gateway To Gateway when i setup the vpn i can ping the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?
View 1 Replies
View Related
Mar 6, 2011
I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, and I can remotely administer each router through the VPN connection, but I am unable to ping computers from one side of the connection to the other. For example, a computer in the 10.10.1.0 subnet can't see / ping / communicate with a computer in the 192.168.1.0 subnet.
Below are the configurations for each. Aside from the static IP configurations and the VPN configurations, no other changes were made to the routers. RV082 DHCP Enabled Tunnel Status: Connected Local Group Setup
IP Only: X.X.X.66Local Security Group Type: SubnetIP Address: 10.10.1.0Subnet Mask: 255.255.255.0Remote Group Setup
View 1 Replies
View Related
Sep 5, 2011
I'm currently setting the MAC address filtering for my Linksys E2500 router. I have about 20 devices which i'm allowing to access my router, so i keyed in the MAC addresses into the config page and save setting. But only 16 addresses are registered, the rest refused to register no matter how many times i key in, it just reset back to 00:00:00:00:00:00 after i click on save setting.
View 4 Replies
View Related
Oct 4, 2012
I previously entered in settings for the "Static DNS" 1 through 3 (using ip addresses from OpenDNS and one from Google DNS).
I want to remove these so the router reverts to using the DNS allocated to it by the ADSL modem (which will likely be the IP of the modem, which then forwards the requests to the DNS from the ISP).But I can't clear the Static DNS settings. I have to put in 0.0.0.0 but the last zero is not accessed. I get the error: The value is out of range [1 - 254].So I end up with 0.0.0.1 and then all Internet access is lost on the computers because they are being given a bad DNS IP.
How can I reset the static DNS ip address back to 0.0.0.0 ?
View 4 Replies
View Related
Feb 28, 2013
I am trying to connect to a new VPN using my E2500 router. As soon as I connect, the connection breaks.
View 1 Replies
View Related
Sep 3, 2012
i buy a new e2500 from staples. but when i try to register the product. it shows me "Serial Number you entered is invalid.". i am sure i choose the right product and number to register.. so is that mean some one used it..
View 3 Replies
View Related
Dec 18, 2012
I want to add my E2500 as a second wireless router to cover my entire house.I have a Motorola Surfboard SBG6580 cable modem (Time-Warner) at one end of the house.I added via powerline Ethernet connection a new E2500 wireless router at the other end of the house.The E2500 set-up with all defaults and has the same SSID and Password as the Surfboard cable modem.It seems to work OK, but I wonder about network confusion/interference.Do I have to configure the E2500 in some manner to allow seamless roaming of my wireless devices (iPad, Cell Phones, Netbook)?I had an RE1000 with just the Surfboard, but it did not quite do the trick, and does not like both routers connected at either end.
View 9 Replies
View Related
Nov 23, 2011
How To Reset E2500 Router
View 1 Replies
View Related
Jan 23, 2012
I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.
View 1 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
Dec 22, 2012
How to set router to use as Slind Box Pro?
View 3 Replies
View Related
Jan 4, 2012
I currently have my E2500 connected via wired LAN (not WAN) port on another router. The E2500 has an LAN IP of 10.0.0.2 and the router has 10.0.0.1 and a dhcp range outside of these. DHCP is disabled on the E2500. I can use my E2500 as a wired access point with no difficulty I plug something in and it calls the router and gets an address, but I can not get DHCP through the wireless of the E2500.
View 2 Replies
View Related
Aug 7, 2011
I have Time Warner as my internet company. I recently purchased a new Linksys Router Mode E2500 because I have been having issues with my old router. My internet was disconnecting sporadically. After connecting the new router, a started getting the same issue. I replaced my internet cable modem to a Cisco 2100 modem (provided by Time Warner). I noticed that the issue keeps happening sporadically which makes me believe it is my Linksys router. Every time a new wireless connection is connected, my modem circuit dies. This happens sporadically.
View 4 Replies
View Related
Dec 27, 2011
I have bought and installed an E2500 router 4 days ago. Installation of router and network using Cisco Connect was easy and without problems. However, after 4 days of usage, not changing anything in the network nor running Cisco Connect or accessing the web interface, I tried to start Cisco Connect and got the message "Cannot access your router".Internet is running, router is accessible via 192.168.1.1 in a browser window, Cisco Connect also works fine on my laptop.The only solution I found on this forum is: reset your router and reinstall Cisco Connect.and then every 4 days resetting my router and reinstalling the software?
View 4 Replies
View Related
